From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/net/ethernet/amd/7990.h | 250 +++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 kernel/drivers/net/ethernet/amd/7990.h (limited to 'kernel/drivers/net/ethernet/amd/7990.h') diff --git a/kernel/drivers/net/ethernet/amd/7990.h b/kernel/drivers/net/ethernet/amd/7990.h new file mode 100644 index 000000000..e9e0be313 --- /dev/null +++ b/kernel/drivers/net/ethernet/amd/7990.h @@ -0,0 +1,250 @@ +/* + * 7990.h -- LANCE ethernet IC generic routines. + * This is an attempt to separate out the bits of various ethernet + * drivers that are common because they all use the AMD 7990 LANCE + * (Local Area Network Controller for Ethernet) chip. + * + * Copyright (C) 05/1998 Peter Maydell + * + * Most of this stuff was obtained by looking at other LANCE drivers, + * in particular a2065.[ch]. The AMD C-LANCE datasheet was also helpful. + */ + +#ifndef _7990_H +#define _7990_H + +/* The lance only has two register locations. We communicate mostly via memory. */ +#define LANCE_RDP 0 /* Register Data Port */ +#define LANCE_RAP 2 /* Register Address Port */ + +/* Transmit/receive ring definitions. + * We allow the specific drivers to override these defaults if they want to. + * NB: according to lance.c, increasing the number of buffers is a waste + * of space and reduces the chance that an upper layer will be able to + * reorder queued Tx packets based on priority. [Clearly there is a minimum + * limit too: too small and we drop rx packets and can't tx at full speed.] + * 4+4 seems to be the usual setting; the atarilance driver uses 3 and 5. + */ + +/* Blast! This won't work. The problem is that we can't specify a default + * setting because that would cause the lance_init_block struct to be + * too long (and overflow the RAM on shared-memory cards like the HP LANCE. + */ +#ifndef LANCE_LOG_TX_BUFFERS +#define LANCE_LOG_TX_BUFFERS 1 +#define LANCE_LOG_RX_BUFFERS 3 +#endif + +#define TX_RING_SIZE (1 << LANCE_LOG_TX_BUFFERS) +#define RX_RING_SIZE (1 << LANCE_LOG_RX_BUFFERS) +#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) +#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) +#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29) +#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29) +#define PKT_BUFF_SIZE (1544) +#define RX_BUFF_SIZE PKT_BUFF_SIZE +#define TX_BUFF_SIZE PKT_BUFF_SIZE + +/* Each receive buffer is described by a receive message descriptor (RMD) */ +struct lance_rx_desc { + volatile unsigned short rmd0; /* low address of packet */ + volatile unsigned char rmd1_bits; /* descriptor bits */ + volatile unsigned char rmd1_hadr; /* high address of packet */ + volatile short length; /* This length is 2s complement (negative)! + * Buffer length */ + volatile unsigned short mblength; /* Actual number of bytes received */ +}; + +/* Ditto for TMD: */ +struct lance_tx_desc { + volatile unsigned short tmd0; /* low address of packet */ + volatile unsigned char tmd1_bits; /* descriptor bits */ + volatile unsigned char tmd1_hadr; /* high address of packet */ + volatile short length; /* Length is 2s complement (negative)! */ + volatile unsigned short misc; +}; + +/* There are three memory structures accessed by the LANCE: + * the initialization block, the receive and transmit descriptor rings, + * and the data buffers themselves. In fact we might as well put the + * init block,the Tx and Rx rings and the buffers together in memory: + */ +struct lance_init_block { + volatile unsigned short mode; /* Pre-set mode (reg. 15) */ + volatile unsigned char phys_addr[6]; /* Physical ethernet address */ + volatile unsigned filter[2]; /* Multicast filter (64 bits) */ + + /* Receive and transmit ring base, along with extra bits. */ + volatile unsigned short rx_ptr; /* receive descriptor addr */ + volatile unsigned short rx_len; /* receive len and high addr */ + volatile unsigned short tx_ptr; /* transmit descriptor addr */ + volatile unsigned short tx_len; /* transmit len and high addr */ + + /* The Tx and Rx ring entries must be aligned on 8-byte boundaries. + * This will be true if this whole struct is 8-byte aligned. + */ + volatile struct lance_tx_desc btx_ring[TX_RING_SIZE]; + volatile struct lance_rx_desc brx_ring[RX_RING_SIZE]; + + volatile char tx_buf[TX_RING_SIZE][TX_BUFF_SIZE]; + volatile char rx_buf[RX_RING_SIZE][RX_BUFF_SIZE]; + /* we use this just to make the struct big enough that we can move its startaddr + * in order to force alignment to an eight byte boundary. + */ +}; + +/* This is where we keep all the stuff the driver needs to know about. + * I'm definitely unhappy about the mechanism for allowing specific + * drivers to add things... + */ +struct lance_private { + const char *name; + unsigned long base; + volatile struct lance_init_block *init_block; /* CPU address of RAM */ + volatile struct lance_init_block *lance_init_block; /* LANCE address of RAM */ + + int rx_new, tx_new; + int rx_old, tx_old; + + int lance_log_rx_bufs, lance_log_tx_bufs; + int rx_ring_mod_mask, tx_ring_mod_mask; + + int tpe; /* TPE is selected */ + int auto_select; /* cable-selection is by carrier */ + unsigned short busmaster_regval; + + unsigned int irq; /* IRQ to register */ + + /* This is because the HP LANCE is disgusting and you have to check + * a DIO-specific register every time you read/write the LANCE regs :-< + * [could we get away with making these some sort of macro?] + */ + void (*writerap)(void *, unsigned short); + void (*writerdp)(void *, unsigned short); + unsigned short (*readrdp)(void *); + spinlock_t devlock; + char tx_full; +}; + +/* + * Am7990 Control and Status Registers + */ +#define LE_CSR0 0x0000 /* LANCE Controller Status */ +#define LE_CSR1 0x0001 /* IADR[15:0] (bit0==0 ie word aligned) */ +#define LE_CSR2 0x0002 /* IADR[23:16] (high bits reserved) */ +#define LE_CSR3 0x0003 /* Misc */ + +/* + * Bit definitions for CSR0 (LANCE Controller Status) + */ +#define LE_C0_ERR 0x8000 /* Error = BABL | CERR | MISS | MERR */ +#define LE_C0_BABL 0x4000 /* Babble: Transmitted too many bits */ +#define LE_C0_CERR 0x2000 /* No Heartbeat (10BASE-T) */ +#define LE_C0_MISS 0x1000 /* Missed Frame (no rx buffer to put it in) */ +#define LE_C0_MERR 0x0800 /* Memory Error */ +#define LE_C0_RINT 0x0400 /* Receive Interrupt */ +#define LE_C0_TINT 0x0200 /* Transmit Interrupt */ +#define LE_C0_IDON 0x0100 /* Initialization Done */ +#define LE_C0_INTR 0x0080 /* Interrupt Flag + = BABL | MISS | MERR | RINT | TINT | IDON */ +#define LE_C0_INEA 0x0040 /* Interrupt Enable */ +#define LE_C0_RXON 0x0020 /* Receive On */ +#define LE_C0_TXON 0x0010 /* Transmit On */ +#define LE_C0_TDMD 0x0008 /* Transmit Demand */ +#define LE_C0_STOP 0x0004 /* Stop */ +#define LE_C0_STRT 0x0002 /* Start */ +#define LE_C0_INIT 0x0001 /* Initialize */ + + +/* + * Bit definitions for CSR3 + */ +#define LE_C3_BSWP 0x0004 /* Byte Swap (on for big endian byte order) */ +#define LE_C3_ACON 0x0002 /* ALE Control (on for active low ALE) */ +#define LE_C3_BCON 0x0001 /* Byte Control */ + + +/* + * Mode Flags + */ +#define LE_MO_PROM 0x8000 /* Promiscuous Mode */ +/* these next ones 0x4000 -- 0x0080 are not available on the LANCE 7990, + * but they are in NetBSD's am7990.h, presumably for backwards-compatible chips + */ +#define LE_MO_DRCVBC 0x4000 /* disable receive broadcast */ +#define LE_MO_DRCVPA 0x2000 /* disable physical address detection */ +#define LE_MO_DLNKTST 0x1000 /* disable link status */ +#define LE_MO_DAPC 0x0800 /* disable automatic polarity correction */ +#define LE_MO_MENDECL 0x0400 /* MENDEC loopback mode */ +#define LE_MO_LRTTSEL 0x0200 /* lower RX threshold / TX mode selection */ +#define LE_MO_PSEL1 0x0100 /* port selection bit1 */ +#define LE_MO_PSEL0 0x0080 /* port selection bit0 */ +/* and this one is from the C-LANCE data sheet... */ +#define LE_MO_EMBA 0x0080 /* Enable Modified Backoff Algorithm + (C-LANCE, not original LANCE) */ +#define LE_MO_INTL 0x0040 /* Internal Loopback */ +#define LE_MO_DRTY 0x0020 /* Disable Retry */ +#define LE_MO_FCOLL 0x0010 /* Force Collision */ +#define LE_MO_DXMTFCS 0x0008 /* Disable Transmit CRC */ +#define LE_MO_LOOP 0x0004 /* Loopback Enable */ +#define LE_MO_DTX 0x0002 /* Disable Transmitter */ +#define LE_MO_DRX 0x0001 /* Disable Receiver */ + + +/* + * Receive Flags + */ +#define LE_R1_OWN 0x80 /* LANCE owns the descriptor */ +#define LE_R1_ERR 0x40 /* Error */ +#define LE_R1_FRA 0x20 /* Framing Error */ +#define LE_R1_OFL 0x10 /* Overflow Error */ +#define LE_R1_CRC 0x08 /* CRC Error */ +#define LE_R1_BUF 0x04 /* Buffer Error */ +#define LE_R1_SOP 0x02 /* Start of Packet */ +#define LE_R1_EOP 0x01 /* End of Packet */ +#define LE_R1_POK 0x03 /* Packet is complete: SOP + EOP */ + + +/* + * Transmit Flags + */ +#define LE_T1_OWN 0x80 /* LANCE owns the descriptor */ +#define LE_T1_ERR 0x40 /* Error */ +#define LE_T1_RES 0x20 /* Reserved, LANCE writes this with a zero */ +#define LE_T1_EMORE 0x10 /* More than one retry needed */ +#define LE_T1_EONE 0x08 /* One retry needed */ +#define LE_T1_EDEF 0x04 /* Deferred */ +#define LE_T1_SOP 0x02 /* Start of Packet */ +#define LE_T1_EOP 0x01 /* End of Packet */ +#define LE_T1_POK 0x03 /* Packet is complete: SOP + EOP */ + +/* + * Error Flags + */ +#define LE_T3_BUF 0x8000 /* Buffer Error */ +#define LE_T3_UFL 0x4000 /* Underflow Error */ +#define LE_T3_LCOL 0x1000 /* Late Collision */ +#define LE_T3_CLOS 0x0800 /* Loss of Carrier */ +#define LE_T3_RTY 0x0400 /* Retry Error */ +#define LE_T3_TDR 0x03ff /* Time Domain Reflectometry */ + +/* Miscellaneous useful macros */ + +#define TX_BUFFS_AVAIL ((lp->tx_old <= lp->tx_new) ? \ + lp->tx_old + lp->tx_ring_mod_mask - lp->tx_new : \ + lp->tx_old - lp->tx_new - 1) + +/* The LANCE only uses 24 bit addresses. This does the obvious thing. */ +#define LANCE_ADDR(x) ((int)(x) & ~0xff000000) + +/* Now the prototypes we export */ +int lance_open(struct net_device *dev); +int lance_close(struct net_device *dev); +int lance_start_xmit(struct sk_buff *skb, struct net_device *dev); +void lance_set_multicast(struct net_device *dev); +void lance_tx_timeout(struct net_device *dev); +#ifdef CONFIG_NET_POLL_CONTROLLER +void lance_poll(struct net_device *dev); +#endif + +#endif /* ndef _7990_H */ -- cgit 1.2.3-korg