From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/drivers/net/arcnet/Kconfig | 5 +- kernel/drivers/net/arcnet/arc-rawmode.c | 142 +++---- kernel/drivers/net/arcnet/arc-rimi.c | 145 +++---- kernel/drivers/net/arcnet/arcdevice.h | 389 +++++++++++++++++ kernel/drivers/net/arcnet/arcnet.c | 702 +++++++++++++++++-------------- kernel/drivers/net/arcnet/capmode.c | 138 +++--- kernel/drivers/net/arcnet/com20020-isa.c | 54 +-- kernel/drivers/net/arcnet/com20020-pci.c | 175 +++++++- kernel/drivers/net/arcnet/com20020.c | 263 +++++++----- kernel/drivers/net/arcnet/com20020.h | 132 ++++++ kernel/drivers/net/arcnet/com20020_cs.c | 325 +++++++------- kernel/drivers/net/arcnet/com9026.h | 17 + kernel/drivers/net/arcnet/com90io.c | 209 +++++---- kernel/drivers/net/arcnet/com90xx.c | 323 +++++++------- kernel/drivers/net/arcnet/rfc1051.c | 77 ++-- kernel/drivers/net/arcnet/rfc1201.c | 238 +++++------ 16 files changed, 2019 insertions(+), 1315 deletions(-) create mode 100644 kernel/drivers/net/arcnet/arcdevice.h create mode 100644 kernel/drivers/net/arcnet/com20020.h create mode 100644 kernel/drivers/net/arcnet/com9026.h (limited to 'kernel/drivers/net/arcnet') diff --git a/kernel/drivers/net/arcnet/Kconfig b/kernel/drivers/net/arcnet/Kconfig index 84fb6349a..39bd16f3f 100644 --- a/kernel/drivers/net/arcnet/Kconfig +++ b/kernel/drivers/net/arcnet/Kconfig @@ -15,10 +15,6 @@ menuconfig ARCNET COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset support" below. - You might also want to have a look at the Ethernet-HOWTO, available - from (even though ARCnet - is not really Ethernet). - To compile this driver as a module, choose M here. The module will be called arcnet. @@ -107,6 +103,7 @@ config ARCNET_RIM_I config ARCNET_COM20020 tristate "ARCnet COM20020 chipset driver" + depends on LEDS_CLASS help This is the driver for the new COM20020 chipset. It supports such things as promiscuous mode, so packet sniffing is possible, and diff --git a/kernel/drivers/net/arcnet/arc-rawmode.c b/kernel/drivers/net/arcnet/arc-rawmode.c index 705e6ce2e..d78f30186 100644 --- a/kernel/drivers/net/arcnet/arc-rawmode.c +++ b/kernel/drivers/net/arcnet/arc-rawmode.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers) - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -24,6 +24,8 @@ * ********************** */ +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -31,58 +33,7 @@ #include #include #include -#include - -#define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n" - - -static void rx(struct net_device *dev, int bufnum, - struct archdr *pkthdr, int length); -static int build_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, uint8_t daddr); -static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, - int bufnum); - -static struct ArcProto rawmode_proto = -{ - .suffix = 'r', - .mtu = XMTU, - .rx = rx, - .build_header = build_header, - .prepare_tx = prepare_tx, - .continue_tx = NULL, - .ack_tx = NULL -}; - - -static int __init arcnet_raw_init(void) -{ - int count; - - printk(VERSION); - - for (count = 0; count < 256; count++) - if (arc_proto_map[count] == arc_proto_default) - arc_proto_map[count] = &rawmode_proto; - - /* for raw mode, we only set the bcast proto if there's no better one */ - if (arc_bcast_proto == arc_proto_default) - arc_bcast_proto = &rawmode_proto; - - arc_proto_default = &rawmode_proto; - return 0; -} - -static void __exit arcnet_raw_exit(void) -{ - arcnet_unregister_proto(&rawmode_proto); -} - -module_init(arcnet_raw_init); -module_exit(arcnet_raw_exit); - -MODULE_LICENSE("GPL"); - +#include "arcdevice.h" /* packet receiver */ static void rx(struct net_device *dev, int bufnum, @@ -93,7 +44,7 @@ static void rx(struct net_device *dev, int bufnum, struct archdr *pkt = pkthdr; int ofs; - BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); if (length > MTU) ofs = 512 - length; @@ -101,15 +52,14 @@ static void rx(struct net_device *dev, int bufnum, ofs = 256 - length; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; skb_reset_mac_header(skb); skb_pull(skb, ARC_HDR_SIZE); @@ -121,38 +71,35 @@ static void rx(struct net_device *dev, int bufnum, pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = cpu_to_be16(ETH_P_ARCNET); netif_rx(skb); } - -/* - * Create the ARCnet hard/soft headers for raw mode. +/* Create the ARCnet hard/soft headers for raw mode. * There aren't any soft headers in raw mode - not even the protocol id. */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. */ pkt->hard.dest = 0; return hdr_size; @@ -163,7 +110,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, return hdr_size; /* success */ } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -171,15 +117,16 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, struct arc_hardware *hard = &pkt->hard; int ofs; - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; if (length > XMTU) { /* should never happen! other people already check for this. */ - BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n", - length, XMTU); + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); length = XMTU; } if (length >= MinTU) { @@ -188,11 +135,12 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, } else if (length > MTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length - 3; - } else + } else { hard->offset[0] = ofs = 256 - length; + } - BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n", - length,ofs); + arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", + length, ofs); lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); @@ -201,3 +149,41 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, return 1; /* done */ } + +static struct ArcProto rawmode_proto = { + .suffix = 'r', + .mtu = XMTU, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .continue_tx = NULL, + .ack_tx = NULL +}; + +static int __init arcnet_raw_init(void) +{ + int count; + + pr_info("raw mode (`r') encapsulation support loaded\n"); + + for (count = 0; count < 256; count++) + if (arc_proto_map[count] == arc_proto_default) + arc_proto_map[count] = &rawmode_proto; + + /* for raw mode, we only set the bcast proto if there's no better one */ + if (arc_bcast_proto == arc_proto_default) + arc_bcast_proto = &rawmode_proto; + + arc_proto_default = &rawmode_proto; + return 0; +} + +static void __exit arcnet_raw_exit(void) +{ + arcnet_unregister_proto(&rawmode_proto); +} + +module_init(arcnet_raw_init); +module_exit(arcnet_raw_exit); + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/net/arcnet/arc-rimi.c b/kernel/drivers/net/arcnet/arc-rimi.c index b8b4c7ba8..a07e24970 100644 --- a/kernel/drivers/net/arcnet/arc-rimi.c +++ b/kernel/drivers/net/arcnet/arc-rimi.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards - * + * * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . * Derived from skeleton.c by Donald Becker. @@ -24,6 +24,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -33,12 +36,10 @@ #include #include #include -#include -#include - - -#define VERSION "arcnet: RIM I (entirely mem-mapped) support\n" +#include +#include "arcdevice.h" +#include "com9026.h" /* Internal function declarations */ @@ -50,66 +51,46 @@ static void arcrimi_setmask(struct net_device *dev, int mask); static int arcrimi_reset(struct net_device *dev, int really_reset); static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); -static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count); +static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); /* Handy defines for ARCnet specific stuff */ /* Amount of I/O memory used by the card */ -#define BUFFER_SIZE (512) -#define MIRROR_SIZE (BUFFER_SIZE*4) +#define BUFFER_SIZE (512) +#define MIRROR_SIZE (BUFFER_SIZE * 4) -/* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) -#define _CONFIG (ioaddr+2) /* Configuration register */ - -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ASTATUS() readb(_STATUS) -#define ACOMMAND(cmd) writeb((cmd),_COMMAND) -#define AINTMASK(msk) writeb((msk),_INTMASK) -#define SETCONF() writeb(lp->config,_CONFIG) - - -/* - * We cannot probe for a RIM I card; one reason is I don't know how to reset +/* We cannot probe for a RIM I card; one reason is I don't know how to reset * them. In fact, we can't even get their node ID automatically. So, we * need to be passed a specific shmem address, IRQ, and node ID. */ static int __init arcrimi_probe(struct net_device *dev) { - BUGLVL(D_NORMAL) printk(VERSION); - BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n"); - - BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n", - dev->dev_addr[0], dev->mem_start, dev->irq); + if (BUGLVL(D_NORMAL)) { + pr_info("%s\n", "RIM I (entirely mem-mapped) support"); + pr_info("E-mail me if you actually test the RIM I driver, please!\n"); + pr_info("Given: node %02Xh, shmem %lXh, irq %d\n", + dev->dev_addr[0], dev->mem_start, dev->irq); + } if (dev->mem_start <= 0 || dev->irq <= 0) { - BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you " - "must specify the shmem and irq!\n"); + if (BUGLVL(D_NORMAL)) + pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n"); return -ENODEV; } if (dev->dev_addr[0] == 0) { - BUGLVL(D_NORMAL) printk("You need to specify your card's station " - "ID!\n"); + if (BUGLVL(D_NORMAL)) + pr_err("You need to specify your card's station ID!\n"); return -ENODEV; } - /* - * Grab the memory region at mem_start for MIRROR_SIZE bytes. + /* Grab the memory region at mem_start for MIRROR_SIZE bytes. * Later in arcrimi_found() the real size will be determined * and this reserve will be released and the correct size * will be taken. */ if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { - BUGLVL(D_NORMAL) printk("Card memory already allocated\n"); + if (BUGLVL(D_NORMAL)) + pr_notice("Card memory already allocated\n"); return -ENODEV; } return arcrimi_found(dev); @@ -125,7 +106,7 @@ static int check_mirror(unsigned long addr, size_t size) p = ioremap(addr, size); if (p) { - if (readb(p) == TESTvalue) + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) res = 1; else res = 0; @@ -136,9 +117,8 @@ static int check_mirror(unsigned long addr, size_t size) return res; } -/* - * Set up the struct net_device associated with this card. Called after - * probing succeeds. +/* Set up the struct net_device associated with this card. + * Called after probing succeeds. */ static int __init arcrimi_found(struct net_device *dev) { @@ -151,7 +131,7 @@ static int __init arcrimi_found(struct net_device *dev) p = ioremap(dev->mem_start, MIRROR_SIZE); if (!p) { release_mem_region(dev->mem_start, MIRROR_SIZE); - BUGMSG(D_NORMAL, "Can't ioremap\n"); + arc_printk(D_NORMAL, dev, "Can't ioremap\n"); return -ENODEV; } @@ -159,13 +139,14 @@ static int __init arcrimi_found(struct net_device *dev) if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) { iounmap(p); release_mem_region(dev->mem_start, MIRROR_SIZE); - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } shmem = dev->mem_start; - writeb(TESTvalue, p); - writeb(dev->dev_addr[0], p + 1); /* actually the node ID */ + arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK); + arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND); + /* actually the station/node ID */ /* find the real shared memory start/end points, including mirrors */ @@ -174,7 +155,7 @@ static int __init arcrimi_found(struct net_device *dev) * 2k (or there are no mirrors at all) but on some, it's 4k. */ mirror_size = MIRROR_SIZE; - if (readb(p) == TESTvalue && + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) mirror_size = 2 * MIRROR_SIZE; @@ -204,8 +185,7 @@ static int __init arcrimi_found(struct net_device *dev) lp->hw.copy_to_card = arcrimi_copy_to_card; lp->hw.copy_from_card = arcrimi_copy_from_card; - /* - * re-reserve the memory region - arcrimi_probe() alloced this reqion + /* re-reserve the memory region - arcrimi_probe() alloced this reqion * but didn't know the real size. Free that region and then re-get * with the correct size. There is a VERY slim chance this could * fail. @@ -215,24 +195,25 @@ static int __init arcrimi_found(struct net_device *dev) if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)")) { - BUGMSG(D_NORMAL, "Card memory already allocated\n"); + arc_printk(D_NORMAL, dev, "Card memory already allocated\n"); goto err_free_irq; } - lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); + lp->mem_start = ioremap(dev->mem_start, + dev->mem_end - dev->mem_start + 1); if (!lp->mem_start) { - BUGMSG(D_NORMAL, "Can't remap device memory!\n"); + arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); goto err_release_mem; } /* get and check the station ID from offset 1 in shmem */ - dev->dev_addr[0] = readb(lp->mem_start + 1); + dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION); - BUGMSG(D_NORMAL, "ARCnet RIM I: station %02Xh found at IRQ %d, " - "ShMem %lXh (%ld*%d bytes).\n", - dev->dev_addr[0], - dev->irq, dev->mem_start, - (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); + arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n", + dev->dev_addr[0], + dev->irq, dev->mem_start, + (dev->mem_end - dev->mem_start + 1) / mirror_size, + mirror_size); err = register_netdev(dev); if (err) @@ -249,9 +230,7 @@ err_free_irq: return -EIO; } - -/* - * Do a hardware reset on the card, and set up necessary registers. +/* Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. @@ -263,17 +242,19 @@ static int arcrimi_reset(struct net_device *dev, int really_reset) struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; - BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS()); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS)); if (really_reset) { - writeb(TESTvalue, ioaddr - 0x800); /* fake reset */ + arcnet_writeb(TESTvalue, ioaddr, -0x800); /* fake reset */ return 0; } - ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ - ACOMMAND(CFLAGScmd | CONFIGclear); + /* clear flags & end reset */ + arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); + arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); /* done! return success. */ return 0; @@ -284,7 +265,7 @@ static void arcrimi_setmask(struct net_device *dev, int mask) struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; - AINTMASK(mask); + arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK); } static int arcrimi_status(struct net_device *dev) @@ -292,7 +273,7 @@ static int arcrimi_status(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; - return ASTATUS(); + return arcnet_readb(ioaddr, COM9026_REG_R_STATUS); } static void arcrimi_command(struct net_device *dev, int cmd) @@ -300,7 +281,7 @@ static void arcrimi_command(struct net_device *dev, int cmd) struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; - ACOMMAND(cmd); + arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND); } static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, @@ -308,16 +289,17 @@ static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; - TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count)); -} + TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); +} -static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; - TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); + + TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); } static int node; @@ -374,12 +356,13 @@ static void __exit arc_rimi_exit(void) static int __init arcrimi_setup(char *s) { int ints[8]; + s = get_options(s, 8, ints); if (!ints[0]) return 1; switch (ints[0]) { default: /* ERROR */ - printk("arcrimi: Too many arguments.\n"); + pr_err("Too many arguments\n"); case 3: /* Node ID */ node = ints[3]; case 2: /* IRQ */ diff --git a/kernel/drivers/net/arcnet/arcdevice.h b/kernel/drivers/net/arcnet/arcdevice.h new file mode 100644 index 000000000..20bfb9ba8 --- /dev/null +++ b/kernel/drivers/net/arcnet/arcdevice.h @@ -0,0 +1,389 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. NET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions used by the ARCnet driver. + * + * Authors: Avery Pennarun and David Woodhouse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef _LINUX_ARCDEVICE_H +#define _LINUX_ARCDEVICE_H + +#include +#include + +#ifdef __KERNEL__ +#include + +/* + * RECON_THRESHOLD is the maximum number of RECON messages to receive + * within one minute before printing a "cabling problem" warning. The + * default value should be fine. + * + * After that, a "cabling restored" message will be printed on the next IRQ + * if no RECON messages have been received for 10 seconds. + * + * Do not define RECON_THRESHOLD at all if you want to disable this feature. + */ +#define RECON_THRESHOLD 30 + +/* + * Define this to the minimum "timeout" value. If a transmit takes longer + * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large + * network, or one with heavy network traffic, this timeout may need to be + * increased. The larger it is, though, the longer it will be between + * necessary transmits - don't set this too high. + */ +#define TX_TIMEOUT (HZ * 200 / 1000) + +/* Display warnings about the driver being an ALPHA version. */ +#undef ALPHA_WARNING + +/* + * Debugging bitflags: each option can be enabled individually. + * + * Note: only debug flags included in the ARCNET_DEBUG_MAX define will + * actually be available. GCC will (at least, GCC 2.7.0 will) notice + * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize + * them out. + */ +#define D_NORMAL 1 /* important operational info */ +#define D_EXTRA 2 /* useful, but non-vital information */ +#define D_INIT 4 /* show init/probe messages */ +#define D_INIT_REASONS 8 /* show reasons for discarding probes */ +#define D_RECON 32 /* print a message whenever token is lost */ +#define D_PROTO 64 /* debug auto-protocol support */ +/* debug levels below give LOTS of output during normal operation! */ +#define D_DURING 128 /* trace operations (including irq's) */ +#define D_TX 256 /* show tx packets */ +#define D_RX 512 /* show rx packets */ +#define D_SKB 1024 /* show skb's */ +#define D_SKB_SIZE 2048 /* show skb sizes */ +#define D_TIMING 4096 /* show time needed to copy buffers to card */ +#define D_DEBUG 8192 /* Very detailed debug line for line */ + +#ifndef ARCNET_DEBUG_MAX +#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */ +#endif + +#ifndef ARCNET_DEBUG +#define ARCNET_DEBUG (D_NORMAL | D_EXTRA) +#endif +extern int arcnet_debug; + +#define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug) + +/* macros to simplify debug checking */ +#define arc_printk(x, dev, fmt, ...) \ +do { \ + if (BUGLVL(x)) { \ + if ((x) == D_NORMAL) \ + netdev_warn(dev, fmt, ##__VA_ARGS__); \ + else if ((x) < D_DURING) \ + netdev_info(dev, fmt, ##__VA_ARGS__); \ + else \ + netdev_dbg(dev, fmt, ##__VA_ARGS__); \ + } \ +} while (0) + +#define arc_cont(x, fmt, ...) \ +do { \ + if (BUGLVL(x)) \ + pr_cont(fmt, ##__VA_ARGS__); \ +} while (0) + +/* see how long a function call takes to run, expressed in CPU cycles */ +#define TIME(dev, name, bytes, call) \ +do { \ + if (BUGLVL(D_TIMING)) { \ + unsigned long _x, _y; \ + _x = get_cycles(); \ + call; \ + _y = get_cycles(); \ + arc_printk(D_TIMING, dev, \ + "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \ + name, bytes, _y - _x, \ + 100000000 / 1024 * bytes / (_y - _x + 1)); \ + } else { \ + call; \ + } \ +} while (0) + +/* + * Time needed to reset the card - in ms (milliseconds). This works on my + * SMC PC100. I can't find a reference that tells me just how long I + * should wait. + */ +#define RESETtime (300) + +/* + * These are the max/min lengths of packet payload, not including the + * arc_hardware header, but definitely including the soft header. + * + * Note: packet sizes 254, 255, 256 are impossible because of the way + * ARCnet registers work That's why RFC1201 defines "exception" packets. + * In non-RFC1201 protocols, we have to just tack some extra bytes on the + * end. + */ +#define MTU 253 /* normal packet max size */ +#define MinTU 257 /* extended packet min size */ +#define XMTU 508 /* extended packet max size */ + +/* status/interrupt mask bit fields */ +#define TXFREEflag 0x01 /* transmitter available */ +#define TXACKflag 0x02 /* transmitted msg. ackd */ +#define RECONflag 0x04 /* network reconfigured */ +#define TESTflag 0x08 /* test flag */ +#define EXCNAKflag 0x08 /* excesive nak flag */ +#define RESETflag 0x10 /* power-on-reset */ +#define RES1flag 0x20 /* reserved - usually set by jumper */ +#define RES2flag 0x40 /* reserved - usually set by jumper */ +#define NORXflag 0x80 /* receiver inhibited */ + +/* Flags used for IO-mapped memory operations */ +#define AUTOINCflag 0x40 /* Increase location with each access */ +#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */ +#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */ + +/* in the command register, the following bits have these meanings: + * 0-2 command + * 3-4 page number (for enable rcv/xmt command) + * 7 receive broadcasts + */ +#define NOTXcmd 0x01 /* disable transmitter */ +#define NORXcmd 0x02 /* disable receiver */ +#define TXcmd 0x03 /* enable transmitter */ +#define RXcmd 0x04 /* enable receiver */ +#define CONFIGcmd 0x05 /* define configuration */ +#define CFLAGScmd 0x06 /* clear flags */ +#define TESTcmd 0x07 /* load test flags */ +#define STARTIOcmd 0x18 /* start internal operation */ + +/* flags for "clear flags" command */ +#define RESETclear 0x08 /* power-on-reset */ +#define CONFIGclear 0x10 /* system reconfigured */ + +#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */ + +/* flags for "load test flags" command */ +#define TESTload 0x08 /* test flag (diagnostic) */ + +/* byte deposited into first address of buffers on reset */ +#define TESTvalue 0321 /* that's octal for 0xD1 :) */ + +/* for "enable receiver" command */ +#define RXbcasts 0x80 /* receive broadcasts */ + +/* flags for "define configuration" command */ +#define NORMALconf 0x00 /* 1-249 byte packets */ +#define EXTconf 0x08 /* 250-504 byte packets */ + +/* card feature flags, set during auto-detection. + * (currently only used by com20020pci) + */ +#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ +#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, + but default is 2.5MBit. */ + +/* information needed to define an encapsulation driver */ +struct ArcProto { + char suffix; /* a for RFC1201, e for ether-encap, etc. */ + int mtu; /* largest possible packet */ + int is_ip; /* This is a ip plugin - not a raw thing */ + + void (*rx)(struct net_device *dev, int bufnum, + struct archdr *pkthdr, int length); + int (*build_header)(struct sk_buff *skb, struct net_device *dev, + unsigned short ethproto, uint8_t daddr); + + /* these functions return '1' if the skb can now be freed */ + int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, + int length, int bufnum); + int (*continue_tx)(struct net_device *dev, int bufnum); + int (*ack_tx)(struct net_device *dev, int acked); +}; + +extern struct ArcProto *arc_proto_map[256], *arc_proto_default, + *arc_bcast_proto, *arc_raw_proto; + +/* + * "Incoming" is information needed for each address that could be sending + * to us. Mostly for partially-received split packets. + */ +struct Incoming { + struct sk_buff *skb; /* packet data buffer */ + __be16 sequence; /* sequence number of assembly */ + uint8_t lastpacket, /* number of last packet (from 1) */ + numpackets; /* number of packets in split */ +}; + +/* only needed for RFC1201 */ +struct Outgoing { + struct ArcProto *proto; /* protocol driver that owns this: + * if NULL, no packet is pending. + */ + struct sk_buff *skb; /* buffer from upper levels */ + struct archdr *pkt; /* a pointer into the skb */ + uint16_t length, /* bytes total */ + dataleft, /* bytes left */ + segnum, /* segment being sent */ + numsegs; /* number of segments */ +}; + +#define ARCNET_LED_NAME_SZ (IFNAMSIZ + 6) + +struct arcnet_local { + uint8_t config, /* current value of CONFIG register */ + timeout, /* Extended timeout for COM20020 */ + backplane, /* Backplane flag for COM20020 */ + clockp, /* COM20020 clock divider */ + clockm, /* COM20020 clock multiplier flag */ + setup, /* Contents of setup1 register */ + setup2, /* Contents of setup2 register */ + intmask; /* current value of INTMASK register */ + uint8_t default_proto[256]; /* default encap to use for each host */ + int cur_tx, /* buffer used by current transmit, or -1 */ + next_tx, /* buffer where a packet is ready to send */ + cur_rx; /* current receive buffer */ + int lastload_dest, /* can last loaded packet be acked? */ + lasttrans_dest; /* can last TX'd packet be acked? */ + int timed_out; /* need to process TX timeout and drop packet */ + unsigned long last_timeout; /* time of last reported timeout */ + char *card_name; /* card ident string */ + int card_flags; /* special card features */ + + /* On preemtive and SMB a lock is needed */ + spinlock_t lock; + + struct led_trigger *tx_led_trig; + char tx_led_trig_name[ARCNET_LED_NAME_SZ]; + struct led_trigger *recon_led_trig; + char recon_led_trig_name[ARCNET_LED_NAME_SZ]; + + struct timer_list timer; + + /* + * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of + * which can be used for either sending or receiving. The new dynamic + * buffer management routines use a simple circular queue of available + * buffers, and take them as they're needed. This way, we simplify + * situations in which we (for example) want to pre-load a transmit + * buffer, or start receiving while we copy a received packet to + * memory. + * + * The rules: only the interrupt handler is allowed to _add_ buffers to + * the queue; thus, this doesn't require a lock. Both the interrupt + * handler and the transmit function will want to _remove_ buffers, so + * we need to handle the situation where they try to do it at the same + * time. + * + * If next_buf == first_free_buf, the queue is empty. Since there are + * only four possible buffers, the queue should never be full. + */ + atomic_t buf_lock; + int buf_queue[5]; + int next_buf, first_free_buf; + + /* network "reconfiguration" handling */ + unsigned long first_recon; /* time of "first" RECON message to count */ + unsigned long last_recon; /* time of most recent RECON */ + int num_recons; /* number of RECONs between first and last. */ + int network_down; /* do we think the network is down? */ + + int excnak_pending; /* We just got an excesive nak interrupt */ + + struct { + uint16_t sequence; /* sequence number (incs with each packet) */ + __be16 aborted_seq; + + struct Incoming incoming[256]; /* one from each address */ + } rfc1201; + + /* really only used by rfc1201, but we'll pretend it's not */ + struct Outgoing outgoing; /* packet currently being sent */ + + /* hardware-specific functions */ + struct { + struct module *owner; + void (*command)(struct net_device *dev, int cmd); + int (*status)(struct net_device *dev); + void (*intmask)(struct net_device *dev, int mask); + int (*reset)(struct net_device *dev, int really_reset); + void (*open)(struct net_device *dev); + void (*close)(struct net_device *dev); + void (*datatrigger) (struct net_device * dev, int enable); + void (*recontrigger) (struct net_device * dev, int enable); + + void (*copy_to_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + void (*copy_from_card)(struct net_device *dev, int bufnum, + int offset, void *buf, int count); + } hw; + + void __iomem *mem_start; /* pointer to ioremap'ed MMIO */ +}; + +enum arcnet_led_event { + ARCNET_LED_EVENT_RECON, + ARCNET_LED_EVENT_OPEN, + ARCNET_LED_EVENT_STOP, + ARCNET_LED_EVENT_TX, +}; + +void arcnet_led_event(struct net_device *netdev, enum arcnet_led_event event); +void devm_arcnet_led_init(struct net_device *netdev, int index, int subid); + +#if ARCNET_DEBUG_MAX & D_SKB +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc); +#else +static inline +void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) +{ +} +#endif + +void arcnet_unregister_proto(struct ArcProto *proto); +irqreturn_t arcnet_interrupt(int irq, void *dev_id); +struct net_device *alloc_arcdev(const char *name); + +int arcnet_open(struct net_device *dev); +int arcnet_close(struct net_device *dev); +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev); +void arcnet_timeout(struct net_device *dev); + +/* I/O equivalents */ + +#ifdef CONFIG_SA1100_CT6001 +#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ +#else +#define BUS_ALIGN 1 +#endif + +/* addr and offset allow register like names to define the actual IO address. + * A configuration option multiplies the offset for alignment. + */ +#define arcnet_inb(addr, offset) \ + inb((addr) + BUS_ALIGN * (offset)) +#define arcnet_outb(value, addr, offset) \ + outb(value, (addr) + BUS_ALIGN * (offset)) + +#define arcnet_insb(addr, offset, buffer, count) \ + insb((addr) + BUS_ALIGN * (offset), buffer, count) +#define arcnet_outsb(addr, offset, buffer, count) \ + outsb((addr) + BUS_ALIGN * (offset), buffer, count) + +#define arcnet_readb(addr, offset) \ + readb((addr) + (offset)) +#define arcnet_writeb(value, addr, offset) \ + writeb(value, (addr) + (offset)) + +#endif /* __KERNEL__ */ +#endif /* _LINUX_ARCDEVICE_H */ diff --git a/kernel/drivers/net/arcnet/arcnet.c b/kernel/drivers/net/arcnet/arcnet.c index 10f71c732..6ea963e3b 100644 --- a/kernel/drivers/net/arcnet/arcnet.c +++ b/kernel/drivers/net/arcnet/arcnet.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - device-independent routines - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -20,12 +20,12 @@ * modified by SRC, incorporated herein by reference. * * ********************** - * + * * The change log is now in a file called ChangeLog in this directory. * * Sources: * - Crynwr arcnet.com/arcether.com packet drivers. - * - arcnet.c v0.00 dated 1/1/94 and apparently by + * - arcnet.c v0.00 dated 1/1/94 and apparently by * Donald Becker - it didn't work :) * - skeleton.c v0.05 dated 11/16/93 by Donald Becker * (from Linux Kernel 1.1.45) @@ -41,7 +41,7 @@ * */ -#define VERSION "arcnet: v3.94 BETA 2007/02/08 - by Avery Pennarun et al.\n" +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include @@ -50,9 +50,13 @@ #include #include #include -#include #include +#include + +#include "arcdevice.h" +#include "com9026.h" + /* "do nothing" functions for protocol drivers */ static void null_rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length); @@ -63,17 +67,24 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, static void arcnet_rx(struct net_device *dev, int bufnum); -/* - * one ArcProto per possible proto ID. None of the elements of +/* one ArcProto per possible proto ID. None of the elements of * arc_proto_map are allowed to be NULL; they will get set to * arc_proto_default instead. It also must not be NULL; if you would like * to set it to NULL, set it to &arc_proto_null instead. */ - struct ArcProto *arc_proto_map[256], *arc_proto_default, - *arc_bcast_proto, *arc_raw_proto; +struct ArcProto *arc_proto_map[256]; +EXPORT_SYMBOL(arc_proto_map); -static struct ArcProto arc_proto_null = -{ +struct ArcProto *arc_proto_default; +EXPORT_SYMBOL(arc_proto_default); + +struct ArcProto *arc_bcast_proto; +EXPORT_SYMBOL(arc_bcast_proto); + +struct ArcProto *arc_raw_proto; +EXPORT_SYMBOL(arc_raw_proto); + +static struct ArcProto arc_proto_null = { .suffix = '?', .mtu = XMTU, .is_ip = 0, @@ -86,19 +97,7 @@ static struct ArcProto arc_proto_null = /* Exported function prototypes */ int arcnet_debug = ARCNET_DEBUG; - -EXPORT_SYMBOL(arc_proto_map); -EXPORT_SYMBOL(arc_proto_default); -EXPORT_SYMBOL(arc_bcast_proto); -EXPORT_SYMBOL(arc_raw_proto); -EXPORT_SYMBOL(arcnet_unregister_proto); EXPORT_SYMBOL(arcnet_debug); -EXPORT_SYMBOL(alloc_arcdev); -EXPORT_SYMBOL(arcnet_interrupt); -EXPORT_SYMBOL(arcnet_open); -EXPORT_SYMBOL(arcnet_close); -EXPORT_SYMBOL(arcnet_send_packet); -EXPORT_SYMBOL(arcnet_timeout); /* Internal function prototypes */ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, @@ -116,29 +115,20 @@ static int __init arcnet_init(void) arcnet_debug = debug; - printk("arcnet loaded.\n"); - -#ifdef ALPHA_WARNING - BUGLVL(D_EXTRA) { - printk("arcnet: ***\n" - "arcnet: * Read arcnet.txt for important release notes!\n" - "arcnet: *\n" - "arcnet: * This is an ALPHA version! (Last stable release: v3.02) E-mail\n" - "arcnet: * me if you have any questions, comments, or bug reports.\n" - "arcnet: ***\n"); - } -#endif + pr_info("arcnet loaded\n"); /* initialize the protocol map */ arc_raw_proto = arc_proto_default = arc_bcast_proto = &arc_proto_null; for (count = 0; count < 256; count++) arc_proto_map[count] = arc_proto_default; - BUGLVL(D_DURING) - printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n", - sizeof(struct arc_hardware), sizeof(struct arc_rfc1201), - sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap), - sizeof(struct archdr)); + if (BUGLVL(D_DURING)) + pr_info("struct sizes: %Zd %Zd %Zd %Zd %Zd\n", + sizeof(struct arc_hardware), + sizeof(struct arc_rfc1201), + sizeof(struct arc_rfc1051), + sizeof(struct arc_eth_encap), + sizeof(struct archdr)); return 0; } @@ -150,9 +140,7 @@ static void __exit arcnet_exit(void) module_init(arcnet_init); module_exit(arcnet_exit); -/* - * Dump the contents of an sk_buff - */ +/* Dump the contents of an sk_buff */ #if ARCNET_DEBUG_MAX & D_SKB void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) @@ -164,14 +152,10 @@ void arcnet_dump_skb(struct net_device *dev, print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb->len, true); } - EXPORT_SYMBOL(arcnet_dump_skb); #endif - -/* - * Dump the contents of an ARCnet buffer - */ +/* Dump the contents of an ARCnet buffer */ #if (ARCNET_DEBUG_MAX & (D_RX | D_TX)) static void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc, int take_arcnet_lock) @@ -183,12 +167,13 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, char hdr[32]; /* hw.copy_from_card expects IRQ context so take the IRQ lock - to keep it single threaded */ - if(take_arcnet_lock) + * to keep it single threaded + */ + if (take_arcnet_lock) spin_lock_irqsave(&lp->lock, flags); lp->hw.copy_from_card(dev, bufnum, 0, buf, 512); - if(take_arcnet_lock) + if (take_arcnet_lock) spin_unlock_irqrestore(&lp->lock, flags); /* if the offset[0] byte is nonzero, this is a 256-byte packet */ @@ -202,13 +187,76 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, #else -#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0) +#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0) #endif +/* Trigger a LED event in response to a ARCNET device event */ +void arcnet_led_event(struct net_device *dev, enum arcnet_led_event event) +{ + struct arcnet_local *lp = netdev_priv(dev); + unsigned long led_delay = 350; + unsigned long tx_delay = 50; + + switch (event) { + case ARCNET_LED_EVENT_RECON: + led_trigger_blink_oneshot(lp->recon_led_trig, + &led_delay, &led_delay, 0); + break; + case ARCNET_LED_EVENT_OPEN: + led_trigger_event(lp->tx_led_trig, LED_OFF); + led_trigger_event(lp->recon_led_trig, LED_OFF); + break; + case ARCNET_LED_EVENT_STOP: + led_trigger_event(lp->tx_led_trig, LED_OFF); + led_trigger_event(lp->recon_led_trig, LED_OFF); + break; + case ARCNET_LED_EVENT_TX: + led_trigger_blink_oneshot(lp->tx_led_trig, + &tx_delay, &tx_delay, 0); + break; + } +} +EXPORT_SYMBOL_GPL(arcnet_led_event); -/* - * Unregister a protocol driver from the arc_proto_map. Protocol drivers +static void arcnet_led_release(struct device *gendev, void *res) +{ + struct arcnet_local *lp = netdev_priv(to_net_dev(gendev)); + + led_trigger_unregister_simple(lp->tx_led_trig); + led_trigger_unregister_simple(lp->recon_led_trig); +} + +/* Register ARCNET LED triggers for a arcnet device + * + * This is normally called from a driver's probe function + */ +void devm_arcnet_led_init(struct net_device *netdev, int index, int subid) +{ + struct arcnet_local *lp = netdev_priv(netdev); + void *res; + + res = devres_alloc(arcnet_led_release, 0, GFP_KERNEL); + if (!res) { + netdev_err(netdev, "cannot register LED triggers\n"); + return; + } + + snprintf(lp->tx_led_trig_name, sizeof(lp->tx_led_trig_name), + "arc%d-%d-tx", index, subid); + snprintf(lp->recon_led_trig_name, sizeof(lp->recon_led_trig_name), + "arc%d-%d-recon", index, subid); + + led_trigger_register_simple(lp->tx_led_trig_name, + &lp->tx_led_trig); + led_trigger_register_simple(lp->recon_led_trig_name, + &lp->recon_led_trig); + + devres_add(&netdev->dev, res); +} +EXPORT_SYMBOL_GPL(devm_arcnet_led_init); + +/* Unregister a protocol driver from the arc_proto_map. Protocol drivers * are responsible for registering themselves, but the unregister routine * is pretty generic so we'll do it here. */ @@ -228,12 +276,11 @@ void arcnet_unregister_proto(struct ArcProto *proto) arc_proto_map[count] = arc_proto_default; } } +EXPORT_SYMBOL(arcnet_unregister_proto); - -/* - * Add a buffer to the queue. Only the interrupt handler is allowed to do +/* Add a buffer to the queue. Only the interrupt handler is allowed to do * this, unless interrupts are disabled. - * + * * Note: we don't check for a full queue, since there aren't enough buffers * to more than fill it. */ @@ -245,19 +292,17 @@ static void release_arcbuf(struct net_device *dev, int bufnum) lp->buf_queue[lp->first_free_buf++] = bufnum; lp->first_free_buf %= 5; - BUGLVL(D_DURING) { - BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ", - bufnum); - for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) - BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); - BUGMSG2(D_DURING, "\n"); + if (BUGLVL(D_DURING)) { + arc_printk(D_DURING, dev, "release_arcbuf: freed #%d; buffer queue is now: ", + bufnum); + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) + arc_cont(D_DURING, "#%d ", lp->buf_queue[i]); + arc_cont(D_DURING, "\n"); } } - -/* - * Get a buffer from the queue. If this returns -1, there are no buffers - * available. +/* Get a buffer from the queue. + * If this returns -1, there are no buffers available. */ static int get_arcbuf(struct net_device *dev) { @@ -266,34 +311,32 @@ static int get_arcbuf(struct net_device *dev) if (!atomic_dec_and_test(&lp->buf_lock)) { /* already in this function */ - BUGMSG(D_NORMAL, "get_arcbuf: overlap (%d)!\n", - lp->buf_lock.counter); - } - else { /* we can continue */ + arc_printk(D_NORMAL, dev, "get_arcbuf: overlap (%d)!\n", + lp->buf_lock.counter); + } else { /* we can continue */ if (lp->next_buf >= 5) lp->next_buf -= 5; - if (lp->next_buf == lp->first_free_buf) - BUGMSG(D_NORMAL, "get_arcbuf: BUG: no buffers are available??\n"); - else { + if (lp->next_buf == lp->first_free_buf) { + arc_printk(D_NORMAL, dev, "get_arcbuf: BUG: no buffers are available??\n"); + } else { buf = lp->buf_queue[lp->next_buf++]; lp->next_buf %= 5; } } - - BUGLVL(D_DURING) { - BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf); - for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5) - BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]); - BUGMSG2(D_DURING, "\n"); + if (BUGLVL(D_DURING)) { + arc_printk(D_DURING, dev, "get_arcbuf: got #%d; buffer queue is now: ", + buf); + for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5) + arc_cont(D_DURING, "#%d ", lp->buf_queue[i]); + arc_cont(D_DURING, "\n"); } atomic_inc(&lp->buf_lock); return buf; } - static int choose_mtu(void) { int count, mtu = 65535; @@ -326,7 +369,7 @@ static void arcdev_setup(struct net_device *dev) dev->type = ARPHRD_ARCNET; dev->netdev_ops = &arcnet_netdev_ops; dev->header_ops = &arcnet_header_ops; - dev->hard_header_len = sizeof(struct archdr); + dev->hard_header_len = sizeof(struct arc_hardware); dev->mtu = choose_mtu(); dev->addr_len = ARCNET_ALEN; @@ -336,7 +379,16 @@ static void arcdev_setup(struct net_device *dev) /* New-style flags. */ dev->flags = IFF_BROADCAST; +} +static void arcnet_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + + if (!netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netdev_info(dev, "link up\n"); + } } struct net_device *alloc_arcdev(const char *name) @@ -346,16 +398,20 @@ struct net_device *alloc_arcdev(const char *name) dev = alloc_netdev(sizeof(struct arcnet_local), name && *name ? name : "arc%d", NET_NAME_UNKNOWN, arcdev_setup); - if(dev) { + if (dev) { struct arcnet_local *lp = netdev_priv(dev); + spin_lock_init(&lp->lock); + init_timer(&lp->timer); + lp->timer.data = (unsigned long) dev; + lp->timer.function = arcnet_timer; } return dev; } +EXPORT_SYMBOL(alloc_arcdev); -/* - * Open/initialize the board. This is called sometime after booting when +/* Open/initialize the board. This is called sometime after booting when * the 'ifconfig' program is run. * * This routine should set everything up anew at each open, even registers @@ -367,34 +423,33 @@ int arcnet_open(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); int count, newmtu, error; - BUGMSG(D_INIT,"opened."); + arc_printk(D_INIT, dev, "opened."); if (!try_module_get(lp->hw.owner)) return -ENODEV; - BUGLVL(D_PROTO) { - BUGMSG(D_PROTO, "protocol map (default is '%c'): ", - arc_proto_default->suffix); + if (BUGLVL(D_PROTO)) { + arc_printk(D_PROTO, dev, "protocol map (default is '%c'): ", + arc_proto_default->suffix); for (count = 0; count < 256; count++) - BUGMSG2(D_PROTO, "%c", arc_proto_map[count]->suffix); - BUGMSG2(D_PROTO, "\n"); + arc_cont(D_PROTO, "%c", arc_proto_map[count]->suffix); + arc_cont(D_PROTO, "\n"); } - - BUGMSG(D_INIT, "arcnet_open: resetting card.\n"); + arc_printk(D_INIT, dev, "arcnet_open: resetting card.\n"); /* try to put the card in a defined state - if it fails the first * time, actually reset it. */ error = -ENODEV; - if (ARCRESET(0) && ARCRESET(1)) + if (lp->hw.reset(dev, 0) && lp->hw.reset(dev, 1)) goto out_module_put; newmtu = choose_mtu(); if (newmtu < dev->mtu) dev->mtu = newmtu; - BUGMSG(D_INIT, "arcnet_open: mtu: %d.\n", dev->mtu); + arc_printk(D_INIT, dev, "arcnet_open: mtu: %d.\n", dev->mtu); /* autodetect the encapsulation for each host. */ memset(lp->default_proto, 0, sizeof(lp->default_proto)); @@ -425,52 +480,57 @@ int arcnet_open(struct net_device *dev) lp->hw.open(dev); if (dev->dev_addr[0] == 0) - BUGMSG(D_NORMAL, "WARNING! Station address 00 is reserved " - "for broadcasts!\n"); + arc_printk(D_NORMAL, dev, "WARNING! Station address 00 is reserved for broadcasts!\n"); else if (dev->dev_addr[0] == 255) - BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse " - "DOS networking programs!\n"); + arc_printk(D_NORMAL, dev, "WARNING! Station address FF may confuse DOS networking programs!\n"); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - if (ASTATUS() & RESETflag) { - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - ACOMMAND(CFLAGScmd | RESETclear); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + if (lp->hw.status(dev) & RESETflag) { + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", + __FILE__, __LINE__, __func__); + lp->hw.command(dev, CFLAGScmd | RESETclear); } - - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* make sure we're ready to receive IRQ's. */ - AINTMASK(0); + lp->hw.intmask(dev, 0); udelay(1); /* give it time to set the mask before * we reset it again. (may not even be * necessary) */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); lp->intmask = NORXflag | RECONflag; - AINTMASK(lp->intmask); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + lp->hw.intmask(dev, lp->intmask); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + netif_carrier_off(dev); netif_start_queue(dev); + mod_timer(&lp->timer, jiffies + msecs_to_jiffies(1000)); + arcnet_led_event(dev, ARCNET_LED_EVENT_OPEN); return 0; out_module_put: module_put(lp->hw.owner); return error; } - +EXPORT_SYMBOL(arcnet_open); /* The inverse routine to arcnet_open - shuts down the card. */ int arcnet_close(struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); + arcnet_led_event(dev, ARCNET_LED_EVENT_STOP); + del_timer_sync(&lp->timer); + netif_stop_queue(dev); + netif_carrier_off(dev); /* flush TX and disable RX */ - AINTMASK(0); - ACOMMAND(NOTXcmd); /* stop transmit */ - ACOMMAND(NORXcmd); /* disable receive */ + lp->hw.intmask(dev, 0); + lp->hw.command(dev, NOTXcmd); /* stop transmit */ + lp->hw.command(dev, NORXcmd); /* disable receive */ mdelay(1); /* shut down the card */ @@ -478,7 +538,7 @@ int arcnet_close(struct net_device *dev) module_put(lp->hw.owner); return 0; } - +EXPORT_SYMBOL(arcnet_close); static int arcnet_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, const void *daddr, @@ -488,48 +548,44 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, uint8_t _daddr, proto_num; struct ArcProto *proto; - BUGMSG(D_DURING, - "create header from %d to %d; protocol %d (%Xh); size %u.\n", - saddr ? *(uint8_t *) saddr : -1, - daddr ? *(uint8_t *) daddr : -1, - type, type, len); - - if (skb->len!=0 && len != skb->len) - BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n", - skb->len, len); - - - /* Type is host order - ? */ - if(type == ETH_P_ARCNET) { - proto = arc_raw_proto; - BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix); - _daddr = daddr ? *(uint8_t *) daddr : 0; - } - else if (!daddr) { - /* - * if the dest addr isn't provided, we can't choose an encapsulation! - * Store the packet type (eg. ETH_P_IP) for now, and we'll push on a - * real header when we do rebuild_header. - */ - *(uint16_t *) skb_push(skb, 2) = type; - /* - * XXX: Why not use skb->mac_len? + arc_printk(D_DURING, dev, + "create header from %d to %d; protocol %d (%Xh); size %u.\n", + saddr ? *(uint8_t *)saddr : -1, + daddr ? *(uint8_t *)daddr : -1, + type, type, len); + + if (skb->len != 0 && len != skb->len) + arc_printk(D_NORMAL, dev, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n", + skb->len, len); + + /* Type is host order - ? */ + if (type == ETH_P_ARCNET) { + proto = arc_raw_proto; + arc_printk(D_DEBUG, dev, "arc_raw_proto used. proto='%c'\n", + proto->suffix); + _daddr = daddr ? *(uint8_t *)daddr : 0; + } else if (!daddr) { + /* if the dest addr isn't provided, we can't choose an + * encapsulation! Store the packet type (eg. ETH_P_IP) + * for now, and we'll push on a real header when we do + * rebuild_header. */ + *(uint16_t *)skb_push(skb, 2) = type; + /* XXX: Why not use skb->mac_len? */ if (skb->network_header - skb->mac_header != 2) - BUGMSG(D_NORMAL, "arcnet_header: Yikes! diff (%d) is not 2!\n", - (int)(skb->network_header - skb->mac_header)); + arc_printk(D_NORMAL, dev, "arcnet_header: Yikes! diff (%u) is not 2!\n", + skb->network_header - skb->mac_header); return -2; /* return error -- can't transmit yet! */ - } - else { + } else { /* otherwise, we can just add the header as usual. */ - _daddr = *(uint8_t *) daddr; + _daddr = *(uint8_t *)daddr; proto_num = lp->default_proto[_daddr]; proto = arc_proto_map[proto_num]; - BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n", - proto_num, proto->suffix); + arc_printk(D_DURING, dev, "building header for %02Xh using protocol '%c'\n", + proto_num, proto->suffix); if (proto == &arc_proto_null && arc_bcast_proto != proto) { - BUGMSG(D_DURING, "actually, let's use '%c' instead.\n", - arc_bcast_proto->suffix); + arc_printk(D_DURING, dev, "actually, let's use '%c' instead.\n", + arc_bcast_proto->suffix); proto = arc_bcast_proto; } } @@ -538,7 +594,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev, /* Called by the kernel in order to transmit a packet. */ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, - struct net_device *dev) + struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); struct archdr *pkt; @@ -546,23 +602,24 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, struct ArcProto *proto; int txbuf; unsigned long flags; - int freeskb, retval; + int retval; - BUGMSG(D_DURING, - "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", - ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol); + arc_printk(D_DURING, dev, + "transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n", + lp->hw.status(dev), lp->cur_tx, lp->next_tx, skb->len, skb->protocol); - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; proto = arc_proto_map[soft->proto]; - BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n", - skb->len, pkt->hard.dest); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx"); + arc_printk(D_SKB_SIZE, dev, "skb: transmitting %d bytes to %02X\n", + skb->len, pkt->hard.dest); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "tx"); /* fits in one packet? */ if (skb->len - ARC_HDR_SIZE > XMTU && !proto->continue_tx) { - BUGMSG(D_NORMAL, "fixme: packet too large: compensating badly!\n"); + arc_printk(D_NORMAL, dev, "fixme: packet too large: compensating badly!\n"); dev_kfree_skb(skb); return NETDEV_TX_OK; /* don't try again */ } @@ -571,96 +628,94 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb, netif_stop_queue(dev); spin_lock_irqsave(&lp->lock, flags); - AINTMASK(0); - if(lp->next_tx == -1) + lp->hw.intmask(dev, 0); + if (lp->next_tx == -1) txbuf = get_arcbuf(dev); - else { + else txbuf = -1; - } + if (txbuf != -1) { if (proto->prepare_tx(dev, pkt, skb->len, txbuf) && !proto->ack_tx) { /* done right away and we don't want to acknowledge - the package later - forget about it now */ + * the package later - forget about it now + */ dev->stats.tx_bytes += skb->len; - freeskb = 1; + dev_kfree_skb(skb); } else { /* do it the 'split' way */ lp->outgoing.proto = proto; lp->outgoing.skb = skb; lp->outgoing.pkt = pkt; - freeskb = 0; - if (proto->continue_tx && proto->continue_tx(dev, txbuf)) { - BUGMSG(D_NORMAL, - "bug! continue_tx finished the first time! " - "(proto='%c')\n", proto->suffix); + arc_printk(D_NORMAL, dev, + "bug! continue_tx finished the first time! (proto='%c')\n", + proto->suffix); } } retval = NETDEV_TX_OK; lp->next_tx = txbuf; } else { retval = NETDEV_TX_BUSY; - freeskb = 0; } - BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); + arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n", + __FILE__, __LINE__, __func__, lp->hw.status(dev)); /* make sure we didn't ignore a TX IRQ while we were in here */ - AINTMASK(0); + lp->hw.intmask(dev, 0); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - lp->intmask |= TXFREEflag|EXCNAKflag; - AINTMASK(lp->intmask); - BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS()); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->intmask |= TXFREEflag | EXCNAKflag; + lp->hw.intmask(dev, lp->intmask); + arc_printk(D_DEBUG, dev, "%s: %d: %s, status: %x\n", + __FILE__, __LINE__, __func__, lp->hw.status(dev)); + + arcnet_led_event(dev, ARCNET_LED_EVENT_TX); spin_unlock_irqrestore(&lp->lock, flags); - if (freeskb) { - dev_kfree_skb(skb); - } return retval; /* no need to try again */ } +EXPORT_SYMBOL(arcnet_send_packet); - -/* - * Actually start transmitting a packet that was loaded into a buffer +/* Actually start transmitting a packet that was loaded into a buffer * by prepare_tx. This should _only_ be called by the interrupt handler. */ static int go_tx(struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); - BUGMSG(D_DURING, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n", - ASTATUS(), lp->intmask, lp->next_tx, lp->cur_tx); + arc_printk(D_DURING, dev, "go_tx: status=%Xh, intmask=%Xh, next_tx=%d, cur_tx=%d\n", + lp->hw.status(dev), lp->intmask, lp->next_tx, lp->cur_tx); if (lp->cur_tx != -1 || lp->next_tx == -1) return 0; - BUGLVL(D_TX) arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0); + if (BUGLVL(D_TX)) + arcnet_dump_packet(dev, lp->next_tx, "go_tx", 0); lp->cur_tx = lp->next_tx; lp->next_tx = -1; /* start sending */ - ACOMMAND(TXcmd | (lp->cur_tx << 3)); + lp->hw.command(dev, TXcmd | (lp->cur_tx << 3)); dev->stats.tx_packets++; lp->lasttrans_dest = lp->lastload_dest; lp->lastload_dest = 0; lp->excnak_pending = 0; - lp->intmask |= TXFREEflag|EXCNAKflag; + lp->intmask |= TXFREEflag | EXCNAKflag; return 1; } - /* Called by the kernel when transmit times out */ void arcnet_timeout(struct net_device *dev) { unsigned long flags; struct arcnet_local *lp = netdev_priv(dev); - int status = ASTATUS(); + int status = lp->hw.status(dev); char *msg; spin_lock_irqsave(&lp->lock, flags); @@ -670,30 +725,29 @@ void arcnet_timeout(struct net_device *dev) msg = ""; dev->stats.tx_aborted_errors++; lp->timed_out = 1; - ACOMMAND(NOTXcmd | (lp->cur_tx << 3)); + lp->hw.command(dev, NOTXcmd | (lp->cur_tx << 3)); } dev->stats.tx_errors++; /* make sure we didn't miss a TX or a EXC NAK IRQ */ - AINTMASK(0); - lp->intmask |= TXFREEflag|EXCNAKflag; - AINTMASK(lp->intmask); - + lp->hw.intmask(dev, 0); + lp->intmask |= TXFREEflag | EXCNAKflag; + lp->hw.intmask(dev, lp->intmask); + spin_unlock_irqrestore(&lp->lock, flags); - if (time_after(jiffies, lp->last_timeout + 10*HZ)) { - BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n", - msg, status, lp->intmask, lp->lasttrans_dest); + if (time_after(jiffies, lp->last_timeout + 10 * HZ)) { + arc_printk(D_EXTRA, dev, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n", + msg, status, lp->intmask, lp->lasttrans_dest); lp->last_timeout = jiffies; } if (lp->cur_tx == -1) netif_wake_queue(dev); } +EXPORT_SYMBOL(arcnet_timeout); - -/* - * The typical workload of the driver: Handle the network interface +/* The typical workload of the driver: Handle the network interface * interrupts. Establish which device needs attention, and call the correct * chipset interrupt handler. */ @@ -704,125 +758,125 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) int recbuf, status, diagstatus, didsomething, boguscount; int retval = IRQ_NONE; - BUGMSG(D_DURING, "\n"); + arc_printk(D_DURING, dev, "\n"); - BUGMSG(D_DURING, "in arcnet_interrupt\n"); + arc_printk(D_DURING, dev, "in arcnet_interrupt\n"); lp = netdev_priv(dev); BUG_ON(!lp); - + spin_lock(&lp->lock); - /* - * RESET flag was enabled - if device is not running, we must clear it right - * away (but nothing else). + /* RESET flag was enabled - if device is not running, we must + * clear it right away (but nothing else). */ if (!netif_running(dev)) { - if (ASTATUS() & RESETflag) - ACOMMAND(CFLAGScmd | RESETclear); - AINTMASK(0); + if (lp->hw.status(dev) & RESETflag) + lp->hw.command(dev, CFLAGScmd | RESETclear); + lp->hw.intmask(dev, 0); spin_unlock(&lp->lock); return retval; } - BUGMSG(D_DURING, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n", - ASTATUS(), lp->intmask); + arc_printk(D_DURING, dev, "in arcnet_inthandler (status=%Xh, intmask=%Xh)\n", + lp->hw.status(dev), lp->intmask); boguscount = 5; do { - status = ASTATUS(); - diagstatus = (status >> 8) & 0xFF; + status = lp->hw.status(dev); + diagstatus = (status >> 8) & 0xFF; - BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n", - __FILE__,__LINE__,__func__,status); + arc_printk(D_DEBUG, dev, "%s: %d: %s: status=%x\n", + __FILE__, __LINE__, __func__, status); didsomething = 0; - /* - * RESET flag was enabled - card is resetting and if RX is + /* RESET flag was enabled - card is resetting and if RX is * disabled, it's NOT because we just got a packet. - * - * The card is in an undefined state. Clear it out and start over. + * + * The card is in an undefined state. + * Clear it out and start over. */ if (status & RESETflag) { - BUGMSG(D_NORMAL, "spurious reset (status=%Xh)\n", status); + arc_printk(D_NORMAL, dev, "spurious reset (status=%Xh)\n", + status); arcnet_close(dev); arcnet_open(dev); /* get out of the interrupt handler! */ break; } - /* - * RX is inhibited - we must have received something. Prepare to - * receive into the next buffer. - * - * We don't actually copy the received packet from the card until - * after the transmit handler runs (and possibly launches the next - * tx); this should improve latency slightly if we get both types - * of interrupts at once. + /* RX is inhibited - we must have received something. + * Prepare to receive into the next buffer. + * + * We don't actually copy the received packet from the card + * until after the transmit handler runs (and possibly + * launches the next tx); this should improve latency slightly + * if we get both types of interrupts at once. */ recbuf = -1; if (status & lp->intmask & NORXflag) { recbuf = lp->cur_rx; - BUGMSG(D_DURING, "Buffer #%d: receive irq (status=%Xh)\n", - recbuf, status); + arc_printk(D_DURING, dev, "Buffer #%d: receive irq (status=%Xh)\n", + recbuf, status); lp->cur_rx = get_arcbuf(dev); if (lp->cur_rx != -1) { - BUGMSG(D_DURING, "enabling receive to buffer #%d\n", - lp->cur_rx); - ACOMMAND(RXcmd | (lp->cur_rx << 3) | RXbcasts); + arc_printk(D_DURING, dev, "enabling receive to buffer #%d\n", + lp->cur_rx); + lp->hw.command(dev, RXcmd | (lp->cur_rx << 3) | RXbcasts); } didsomething++; } - if((diagstatus & EXCNAKflag)) { - BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n", - diagstatus); + if ((diagstatus & EXCNAKflag)) { + arc_printk(D_DURING, dev, "EXCNAK IRQ (diagstat=%Xh)\n", + diagstatus); - ACOMMAND(NOTXcmd); /* disable transmit */ - lp->excnak_pending = 1; + lp->hw.command(dev, NOTXcmd); /* disable transmit */ + lp->excnak_pending = 1; - ACOMMAND(EXCNAKclear); + lp->hw.command(dev, EXCNAKclear); lp->intmask &= ~(EXCNAKflag); - didsomething++; - } - + didsomething++; + } /* a transmit finished, and we're interested in it. */ if ((status & lp->intmask & TXFREEflag) || lp->timed_out) { - lp->intmask &= ~(TXFREEflag|EXCNAKflag); + lp->intmask &= ~(TXFREEflag | EXCNAKflag); - BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status); + arc_printk(D_DURING, dev, "TX IRQ (stat=%Xh)\n", + status); if (lp->cur_tx != -1 && !lp->timed_out) { - if(!(status & TXACKflag)) { + if (!(status & TXACKflag)) { if (lp->lasttrans_dest != 0) { - BUGMSG(D_EXTRA, - "transmit was not acknowledged! " - "(status=%Xh, dest=%02Xh)\n", - status, lp->lasttrans_dest); + arc_printk(D_EXTRA, dev, + "transmit was not acknowledged! (status=%Xh, dest=%02Xh)\n", + status, + lp->lasttrans_dest); dev->stats.tx_errors++; dev->stats.tx_carrier_errors++; } else { - BUGMSG(D_DURING, - "broadcast was not acknowledged; that's normal " - "(status=%Xh, dest=%02Xh)\n", - status, lp->lasttrans_dest); + arc_printk(D_DURING, dev, + "broadcast was not acknowledged; that's normal (status=%Xh, dest=%02Xh)\n", + status, + lp->lasttrans_dest); } } if (lp->outgoing.proto && lp->outgoing.proto->ack_tx) { - int ackstatus; - if(status & TXACKflag) - ackstatus=2; - else if(lp->excnak_pending) - ackstatus=1; - else - ackstatus=0; - - lp->outgoing.proto - ->ack_tx(dev, ackstatus); + int ackstatus; + + if (status & TXACKflag) + ackstatus = 2; + else if (lp->excnak_pending) + ackstatus = 1; + else + ackstatus = 0; + + lp->outgoing.proto + ->ack_tx(dev, ackstatus); } } if (lp->cur_tx != -1) @@ -836,17 +890,18 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) go_tx(dev); /* continue a split packet, if any */ - if (lp->outgoing.proto && lp->outgoing.proto->continue_tx) { + if (lp->outgoing.proto && + lp->outgoing.proto->continue_tx) { int txbuf = get_arcbuf(dev); + if (txbuf != -1) { if (lp->outgoing.proto->continue_tx(dev, txbuf)) { /* that was the last segment */ dev->stats.tx_bytes += lp->outgoing.skb->len; - if(!lp->outgoing.proto->ack_tx) - { - dev_kfree_skb_irq(lp->outgoing.skb); - lp->outgoing.proto = NULL; - } + if (!lp->outgoing.proto->ack_tx) { + dev_kfree_skb_irq(lp->outgoing.skb); + lp->outgoing.proto = NULL; + } } lp->next_tx = txbuf; } @@ -857,7 +912,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) } /* now process the received packet, if any */ if (recbuf != -1) { - BUGLVL(D_RX) arcnet_dump_packet(dev, recbuf, "rx irq", 0); + if (BUGLVL(D_RX)) + arcnet_dump_packet(dev, recbuf, "rx irq", 0); arcnet_rx(dev, recbuf); release_arcbuf(dev, recbuf); @@ -865,32 +921,39 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) didsomething++; } if (status & lp->intmask & RECONflag) { - ACOMMAND(CFLAGScmd | CONFIGclear); + lp->hw.command(dev, CFLAGScmd | CONFIGclear); dev->stats.tx_carrier_errors++; - BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n", - status); + arc_printk(D_RECON, dev, "Network reconfiguration detected (status=%Xh)\n", + status); + if (netif_carrier_ok(dev)) { + netif_carrier_off(dev); + netdev_info(dev, "link down\n"); + } + mod_timer(&lp->timer, jiffies + msecs_to_jiffies(1000)); + + arcnet_led_event(dev, ARCNET_LED_EVENT_RECON); /* MYRECON bit is at bit 7 of diagstatus */ - if(diagstatus & 0x80) - BUGMSG(D_RECON,"Put out that recon myself\n"); + if (diagstatus & 0x80) + arc_printk(D_RECON, dev, "Put out that recon myself\n"); /* is the RECON info empty or old? */ if (!lp->first_recon || !lp->last_recon || time_after(jiffies, lp->last_recon + HZ * 10)) { if (lp->network_down) - BUGMSG(D_NORMAL, "reconfiguration detected: cabling restored?\n"); + arc_printk(D_NORMAL, dev, "reconfiguration detected: cabling restored?\n"); lp->first_recon = lp->last_recon = jiffies; lp->num_recons = lp->network_down = 0; - BUGMSG(D_DURING, "recon: clearing counters.\n"); + arc_printk(D_DURING, dev, "recon: clearing counters.\n"); } else { /* add to current RECON counter */ lp->last_recon = jiffies; lp->num_recons++; - BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n", - lp->num_recons, - (lp->last_recon - lp->first_recon) / HZ, - lp->network_down); + arc_printk(D_DURING, dev, "recon: counter=%d, time=%lds, net=%d\n", + lp->num_recons, + (lp->last_recon - lp->first_recon) / HZ, + lp->network_down); /* if network is marked up; * and first_recon and last_recon are 60+ apart; @@ -902,46 +965,45 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id) (lp->last_recon - lp->first_recon) <= HZ * 60 && lp->num_recons >= RECON_THRESHOLD) { lp->network_down = 1; - BUGMSG(D_NORMAL, "many reconfigurations detected: cabling problem?\n"); + arc_printk(D_NORMAL, dev, "many reconfigurations detected: cabling problem?\n"); } else if (!lp->network_down && lp->last_recon - lp->first_recon > HZ * 60) { - /* reset counters if we've gone for over a minute. */ + /* reset counters if we've gone for + * over a minute. + */ lp->first_recon = lp->last_recon; lp->num_recons = 1; } } } else if (lp->network_down && - time_after(jiffies, lp->last_recon + HZ * 10)) { + time_after(jiffies, lp->last_recon + HZ * 10)) { if (lp->network_down) - BUGMSG(D_NORMAL, "cabling restored?\n"); + arc_printk(D_NORMAL, dev, "cabling restored?\n"); lp->first_recon = lp->last_recon = 0; lp->num_recons = lp->network_down = 0; - BUGMSG(D_DURING, "not recon: clearing counters anyway.\n"); + arc_printk(D_DURING, dev, "not recon: clearing counters anyway.\n"); + netif_carrier_on(dev); } - if(didsomething) { + if (didsomething) retval |= IRQ_HANDLED; - } - } - while (--boguscount && didsomething); - - BUGMSG(D_DURING, "arcnet_interrupt complete (status=%Xh, count=%d)\n", - ASTATUS(), boguscount); - BUGMSG(D_DURING, "\n"); + } while (--boguscount && didsomething); + arc_printk(D_DURING, dev, "arcnet_interrupt complete (status=%Xh, count=%d)\n", + lp->hw.status(dev), boguscount); + arc_printk(D_DURING, dev, "\n"); - AINTMASK(0); + lp->hw.intmask(dev, 0); udelay(1); - AINTMASK(lp->intmask); - + lp->hw.intmask(dev, lp->intmask); + spin_unlock(&lp->lock); return retval; } +EXPORT_SYMBOL(arcnet_interrupt); - -/* - * This is a generic packet receiver that calls arcnet??_rx depending on the +/* This is a generic packet receiver that calls arcnet??_rx depending on the * protocol ID found. */ static void arcnet_rx(struct net_device *dev, int bufnum) @@ -963,32 +1025,31 @@ static void arcnet_rx(struct net_device *dev, int bufnum) } /* get the full header, if possible */ - if (sizeof(pkt.soft) <= length) + if (sizeof(pkt.soft) <= length) { lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft)); - else { + } else { memset(&pkt.soft, 0, sizeof(pkt.soft)); lp->hw.copy_from_card(dev, bufnum, ofs, soft, length); } - BUGMSG(D_DURING, "Buffer #%d: received packet from %02Xh to %02Xh " - "(%d+4 bytes)\n", - bufnum, pkt.hard.source, pkt.hard.dest, length); + arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n", + bufnum, pkt.hard.source, pkt.hard.dest, length); dev->stats.rx_packets++; dev->stats.rx_bytes += length + ARC_HDR_SIZE; /* call the right receiver for the protocol */ if (arc_proto_map[soft->proto]->is_ip) { - BUGLVL(D_PROTO) { + if (BUGLVL(D_PROTO)) { struct ArcProto *oldp = arc_proto_map[lp->default_proto[pkt.hard.source]], *newp = arc_proto_map[soft->proto]; if (oldp != newp) { - BUGMSG(D_PROTO, - "got protocol %02Xh; encap for host %02Xh is now '%c'" - " (was '%c')\n", soft->proto, pkt.hard.source, - newp->suffix, oldp->suffix); + arc_printk(D_PROTO, dev, + "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n", + soft->proto, pkt.hard.source, + newp->suffix, oldp->suffix); } } @@ -1002,30 +1063,27 @@ static void arcnet_rx(struct net_device *dev, int bufnum) arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length); } - static void null_rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) { - BUGMSG(D_PROTO, - "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", - pkthdr->soft.rfc1201.proto, pkthdr->hard.source); + arc_printk(D_PROTO, dev, + "rx: don't know how to deal with proto %02Xh from host %02Xh.\n", + pkthdr->soft.rfc1201.proto, pkthdr->hard.source); } - static int null_build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { struct arcnet_local *lp = netdev_priv(dev); - BUGMSG(D_PROTO, - "tx: can't build header for encap %02Xh; load a protocol driver.\n", - lp->default_proto[daddr]); + arc_printk(D_PROTO, dev, + "tx: can't build header for encap %02Xh; load a protocol driver.\n", + lp->default_proto[daddr]); /* always fails */ return 0; } - /* the "do nothing" prepare_tx function warns that there's nothing to do. */ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) @@ -1033,7 +1091,7 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt, struct arcnet_local *lp = netdev_priv(dev); struct arc_hardware newpkt; - BUGMSG(D_PROTO, "tx: no encap for this host; load a protocol driver.\n"); + arc_printk(D_PROTO, dev, "tx: no encap for this host; load a protocol driver.\n"); /* send a packet to myself -- will never get received, of course */ newpkt.source = newpkt.dest = dev->dev_addr[0]; diff --git a/kernel/drivers/net/arcnet/capmode.c b/kernel/drivers/net/arcnet/capmode.c index 42fce91b7..2056878fb 100644 --- a/kernel/drivers/net/arcnet/capmode.c +++ b/kernel/drivers/net/arcnet/capmode.c @@ -26,6 +26,8 @@ * ********************** */ +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -33,9 +35,8 @@ #include #include #include -#include -#define VERSION "arcnet: cap mode (`c') encapsulation support loaded.\n" +#include "arcdevice.h" /* packet receiver */ static void rx(struct net_device *dev, int bufnum, @@ -47,7 +48,8 @@ static void rx(struct net_device *dev, int bufnum, char *pktbuf, *pkthdrbuf; int ofs; - BUGMSG(D_DURING, "it's a raw(cap) packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's a raw(cap) packet (length=%d)\n", + length); if (length >= MinTU) ofs = 512 - length; @@ -55,8 +57,7 @@ static void rx(struct net_device *dev, int bufnum, ofs = 256 - length; skb = alloc_skb(length + ARC_HDR_SIZE + sizeof(int), GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } @@ -66,17 +67,17 @@ static void rx(struct net_device *dev, int bufnum, pkt = (struct archdr *)skb_mac_header(skb); skb_pull(skb, ARC_HDR_SIZE); - /* up to sizeof(pkt->soft) has already been copied from the card */ - /* squeeze in an int for the cap encapsulation */ - - /* use these variables to be sure we count in bytes, not in - sizeof(struct archdr) */ - pktbuf=(char*)pkt; - pkthdrbuf=(char*)pkthdr; - memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)); - memcpy(pktbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)+sizeof(int), - pkthdrbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto), - sizeof(struct archdr)-ARC_HDR_SIZE-sizeof(pkt->soft.cap.proto)); + /* up to sizeof(pkt->soft) has already been copied from the card + * squeeze in an int for the cap encapsulation + * use these variables to be sure we count in bytes, not in + * sizeof(struct archdr) + */ + pktbuf = (char *)pkt; + pkthdrbuf = (char *)pkthdr; + memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto)); + memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int), + pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto), + sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto)); if (length > sizeof(pkt->soft)) lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), @@ -84,15 +85,14 @@ static void rx(struct net_device *dev, int bufnum, + sizeof(int), length - sizeof(pkt->soft)); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = cpu_to_be16(ETH_P_ARCNET); netif_rx(skb); } - -/* - * Create the ARCnet hard/soft headers for cap mode. +/* Create the ARCnet hard/soft headers for cap mode. * There aren't any soft headers in cap mode - not even the protocol id. */ static int build_header(struct sk_buff *skb, @@ -101,12 +101,12 @@ static int build_header(struct sk_buff *skb, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); - BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n", - *((int*)&pkt->soft.cap.cookie[0])); - /* - * Set the source hardware address. + arc_printk(D_PROTO, dev, "Preparing header for cap packet %x.\n", + *((int *)&pkt->soft.cap.cookie[0])); + + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in * debugging. ARCnet does not allow us to change the source address in @@ -117,9 +117,8 @@ static int build_header(struct sk_buff *skb, /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. + /* FIXME: fill in the last byte of the dest ipaddr here to + * better comply with RFC1051 in "noarp" mode. */ pkt->hard.dest = 0; return hdr_size; @@ -130,7 +129,6 @@ static int build_header(struct sk_buff *skb, return hdr_size; /* success */ } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -138,22 +136,21 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, struct arc_hardware *hard = &pkt->hard; int ofs; - /* hard header is not included in packet length */ length -= ARC_HDR_SIZE; /* And neither is the cookie field */ length -= sizeof(int); - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - BUGMSG(D_PROTO, "Sending for cap packet %x.\n", - *((int*)&pkt->soft.cap.cookie[0])); + arc_printk(D_PROTO, dev, "Sending for cap packet %x.\n", + *((int *)&pkt->soft.cap.cookie[0])); if (length > XMTU) { /* should never happen! other people already check for this. */ - BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n", - length, XMTU); + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); length = XMTU; } if (length > MinTU) { @@ -162,11 +159,12 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, } else if (length > MTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length - 3; - } else + } else { hard->offset[0] = ofs = 256 - length; + } - BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n", - length,ofs); + arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n", + length, ofs); /* Copy the arcnet-header + the protocol byte down: */ lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); @@ -174,9 +172,10 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, sizeof(pkt->soft.cap.proto)); /* Skip the extra integer we have written into it as a cookie - but write the rest of the message: */ - lp->hw.copy_to_card(dev, bufnum, ofs+1, - ((unsigned char*)&pkt->soft.cap.mes),length-1); + * but write the rest of the message: + */ + lp->hw.copy_to_card(dev, bufnum, ofs + 1, + ((unsigned char *)&pkt->soft.cap.mes), length - 1); lp->lastload_dest = hard->dest; @@ -188,21 +187,20 @@ static int ack_tx(struct net_device *dev, int acked) struct arcnet_local *lp = netdev_priv(dev); struct sk_buff *ackskb; struct archdr *ackpkt; - int length=sizeof(struct arc_cap); + int length = sizeof(struct arc_cap); - BUGMSG(D_DURING, "capmode: ack_tx: protocol: %x: result: %d\n", - lp->outgoing.skb->protocol, acked); + arc_printk(D_DURING, dev, "capmode: ack_tx: protocol: %x: result: %d\n", + lp->outgoing.skb->protocol, acked); - BUGLVL(D_SKB) arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx"); /* Now alloc a skb to send back up through the layers: */ - ackskb = alloc_skb(length + ARC_HDR_SIZE , GFP_ATOMIC); - if (ackskb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, can't acknowledge.\n"); + ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); + if (!ackskb) goto free_outskb; - } - skb_put(ackskb, length + ARC_HDR_SIZE ); + skb_put(ackskb, length + ARC_HDR_SIZE); ackskb->dev = dev; skb_reset_mac_header(ackskb); @@ -212,39 +210,40 @@ static int ack_tx(struct net_device *dev, int acked) skb_copy_from_linear_data(lp->outgoing.skb, ackpkt, ARC_HDR_SIZE + sizeof(struct arc_cap)); ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */ - ackpkt->soft.cap.mes.ack=acked; + ackpkt->soft.cap.mes.ack = acked; - BUGMSG(D_PROTO, "Ackknowledge for cap packet %x.\n", - *((int*)&ackpkt->soft.cap.cookie[0])); + arc_printk(D_PROTO, dev, "Ackknowledge for cap packet %x.\n", + *((int *)&ackpkt->soft.cap.cookie[0])); ackskb->protocol = cpu_to_be16(ETH_P_ARCNET); - BUGLVL(D_SKB) arcnet_dump_skb(dev, ackskb, "ack_tx_recv"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, ackskb, "ack_tx_recv"); netif_rx(ackskb); free_outskb: dev_kfree_skb_irq(lp->outgoing.skb); - lp->outgoing.proto = NULL; /* We are always finished when in this protocol */ + lp->outgoing.proto = NULL; + /* We are always finished when in this protocol */ return 0; } -static struct ArcProto capmode_proto = -{ - 'r', - XMTU, - 0, - rx, - build_header, - prepare_tx, - NULL, - ack_tx +static struct ArcProto capmode_proto = { + .suffix = 'r', + .mtu = XMTU, + .rx = rx, + .build_header = build_header, + .prepare_tx = prepare_tx, + .ack_tx = ack_tx }; -static void arcnet_cap_init(void) +static int __init capmode_module_init(void) { int count; + pr_info("cap mode (`c') encapsulation support loaded\n"); + for (count = 1; count <= 8; count++) if (arc_proto_map[count] == arc_proto_default) arc_proto_map[count] = &capmode_proto; @@ -255,12 +254,7 @@ static void arcnet_cap_init(void) arc_proto_default = &capmode_proto; arc_raw_proto = &capmode_proto; -} -static int __init capmode_module_init(void) -{ - printk(VERSION); - arcnet_cap_init(); return 0; } diff --git a/kernel/drivers/net/arcnet/com20020-isa.c b/kernel/drivers/net/arcnet/com20020-isa.c index 45c61a2c5..b9e993135 100644 --- a/kernel/drivers/net/arcnet/com20020-isa.c +++ b/kernel/drivers/net/arcnet/com20020-isa.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -25,6 +25,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -36,16 +39,12 @@ #include #include #include -#include -#include - -#include +#include -#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n" +#include "arcdevice.h" +#include "com20020.h" - -/* - * We cannot (yet) probe for an IO mapped card, although we can check that +/* We cannot (yet) probe for an IO mapped card, although we can check that * it's where we were told it was, and even do autoirq. */ static int __init com20020isa_probe(struct net_device *dev) @@ -55,21 +54,21 @@ static int __init com20020isa_probe(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); int err; - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 ISA support (by David Woodhouse et al.)"); ioaddr = dev->base_addr; if (!ioaddr) { - BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you " - "must specify the base address!\n"); + arc_printk(D_NORMAL, dev, "No autoprobe (yet) for IO mapped cards; you must specify the base address!\n"); return -ENODEV; } if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) { - BUGMSG(D_NORMAL, "IO region %xh-%xh already allocated.\n", - ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); + arc_printk(D_NORMAL, dev, "IO region %xh-%xh already allocated.\n", + ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); return -ENXIO; } - if (ASTATUS() == 0xFF) { - BUGMSG(D_NORMAL, "IO address %x empty\n", ioaddr); + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { + arc_printk(D_NORMAL, dev, "IO address %x empty\n", ioaddr); err = -ENODEV; goto out; } @@ -83,23 +82,24 @@ static int __init com20020isa_probe(struct net_device *dev) * card has just reset and the NORXflag is on until * we tell it to start receiving. */ - BUGMSG(D_INIT_REASONS, "intmask was %02Xh\n", inb(_INTMASK)); - outb(0, _INTMASK); + arc_printk(D_INIT_REASONS, dev, "intmask was %02Xh\n", + arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); udelay(1); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { - BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed first time\n"); + arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed first time\n"); airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); udelay(5); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { - BUGMSG(D_NORMAL, "Autoprobe IRQ failed.\n"); + arc_printk(D_NORMAL, dev, "Autoprobe IRQ failed.\n"); err = -ENODEV; goto out; } @@ -107,7 +107,9 @@ static int __init com20020isa_probe(struct net_device *dev) } lp->card_name = "ISA COM20020"; - if ((err = com20020_found(dev, 0)) != 0) + + err = com20020_found(dev, 0); + if (err != 0) goto out; return 0; @@ -194,7 +196,7 @@ static int __init com20020isa_setup(char *s) switch (ints[0]) { default: /* ERROR */ - printk("com90xx: Too many arguments.\n"); + pr_info("Too many arguments\n"); case 6: /* Timeout */ timeout = ints[6]; case 5: /* CKP value */ diff --git a/kernel/drivers/net/arcnet/com20020-pci.c b/kernel/drivers/net/arcnet/com20020-pci.c index 96edc1346..239de38fb 100644 --- a/kernel/drivers/net/arcnet/com20020-pci.c +++ b/kernel/drivers/net/arcnet/com20020-pci.c @@ -1,7 +1,7 @@ /* * Linux ARCnet driver - COM20020 PCI support * Contemporary Controls PCI20 and SOHARD SH-ARC PCI - * + * * Written 1994-1999 by Avery Pennarun, * based on an ISA version by David Woodhouse. * Written 1999-2000 by Martin Mares . @@ -26,6 +26,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -36,14 +39,12 @@ #include #include #include -#include -#include #include +#include +#include -#include - - -#define VERSION "arcnet: COM20020 PCI support\n" +#include "arcdevice.h" +#include "com20020.h" /* Module parameters */ @@ -62,11 +63,43 @@ module_param(clockp, int, 0); module_param(clockm, int, 0); MODULE_LICENSE("GPL"); +static void led_tx_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, tx_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].green); +} + +static void led_recon_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct com20020_dev *card; + struct com20020_priv *priv; + struct com20020_pci_card_info *ci; + + card = container_of(led_cdev, struct com20020_dev, recon_led); + + priv = card->pci_priv; + ci = priv->ci; + + outb(!!value, priv->misc + ci->leds[card->index].red); +} + static void com20020pci_remove(struct pci_dev *pdev); -static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int com20020pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) { struct com20020_pci_card_info *ci; + struct com20020_pci_channel_map *mm; struct net_device *dev; struct arcnet_local *lp; struct com20020_priv *priv; @@ -83,9 +116,21 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i ci = (struct com20020_pci_card_info *)id->driver_data; priv->ci = ci; + mm = &ci->misc_map; INIT_LIST_HEAD(&priv->list_dev); + if (mm->size) { + ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset; + r = devm_request_region(&pdev->dev, ioaddr, mm->size, + "com20020-pci"); + if (!r) { + pr_err("IO region %xh-%xh already allocated.\n", + ioaddr, ioaddr + mm->size - 1); + return -EBUSY; + } + priv->misc = ioaddr; + } for (i = 0; i < ci->devcount; i++) { struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i]; @@ -96,18 +141,19 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i ret = -ENOMEM; goto out_port; } + dev->dev_port = i; dev->netdev_ops = &com20020_netdev_ops; lp = netdev_priv(dev); - BUGMSG(D_NORMAL, "%s Controls\n", ci->name); + arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name); ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset; r = devm_request_region(&pdev->dev, ioaddr, cm->size, "com20020-pci"); if (!r) { - pr_err("IO region %xh-%xh already allocated.\n", + pr_err("IO region %xh-%xh already allocated\n", ioaddr, ioaddr + cm->size - 1); ret = -EBUSY; goto out_port; @@ -117,8 +163,8 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i * ARCNET controller needs * this access to detect bustype */ - outb(0x00, ioaddr + 1); - inb(ioaddr + 1); + arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); + arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); dev->base_addr = ioaddr; dev->dev_addr[0] = node; @@ -131,7 +177,14 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i lp->timeout = timeout; lp->hw.owner = THIS_MODULE; - if (ASTATUS() == 0xFF) { + /* Get the dev_id from the PLX rotary coder */ + if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) + dev->dev_id = 0xc; + dev->dev_id ^= inb(priv->misc + ci->rotary) >> 4; + + snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); ret = -EIO; goto out_port; @@ -143,21 +196,46 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), GFP_KERNEL); - if (!card) { - pr_err("%s out of memory!\n", __func__); + if (!card) return -ENOMEM; - } card->index = i; card->pci_priv = priv; + card->tx_led.brightness_set = led_tx_set; + card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-tx", + dev->dev_id, i); + card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:green:tx:%d-%d", + dev->dev_id, i); + + card->tx_led.dev = &dev->dev; + card->recon_led.brightness_set = led_recon_set; + card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-recon", + dev->dev_id, i); + card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:red:recon:%d-%d", + dev->dev_id, i); + card->recon_led.dev = &dev->dev; card->dev = dev; + ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); + if (ret) + goto out_port; + + ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); + if (ret) + goto out_port; + dev_set_drvdata(&dev->dev, card); ret = com20020_found(dev, IRQF_SHARED); if (ret) goto out_port; + devm_arcnet_led_init(dev, dev->dev_id, i); + list_add(&card->list, &priv->list_dev); } @@ -190,7 +268,11 @@ static struct com20020_pci_card_info card_info_10mbit = { .name = "ARC-PCI", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, .flags = ARC_CAN_10MBIT, }; @@ -199,7 +281,11 @@ static struct com20020_pci_card_info card_info_5mbit = { .name = "ARC-PCI", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, .flags = ARC_IS_5MBIT, }; @@ -209,7 +295,11 @@ static struct com20020_pci_card_info card_info_sohard = { .devcount = 1, /* SOHARD needs PCI base addr 4 */ .chan_map_tbl = { - {4, 0x00, 0x08}, + { + .bar = 4, + .offset = 0x00, + .size = 0x08 + }, }, .flags = ARC_CAN_10MBIT, }; @@ -218,8 +308,24 @@ static struct com20020_pci_card_info card_info_eae_arc1 = { .name = "EAE PLX-PCI ARC1", .devcount = 1, .chan_map_tbl = { - { 2, 0x00, 0x08 }, + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, + }, + .rotary = 0x0, .flags = ARC_CAN_10MBIT, }; @@ -227,9 +333,31 @@ static struct com20020_pci_card_info card_info_eae_ma1 = { .name = "EAE PLX-PCI MA1", .devcount = 2, .chan_map_tbl = { - { 2, 0x00, 0x08 }, - { 2, 0x08, 0x08 } + { + .bar = 2, + .offset = 0x00, + .size = 0x08, + }, { + .bar = 2, + .offset = 0x08, + .size = 0x08, + } + }, + .misc_map = { + .bar = 2, + .offset = 0x10, + .size = 0x04, + }, + .leds = { + { + .green = 0x0, + .red = 0x1, + }, { + .green = 0x2, + .red = 0x3, + }, }, + .rotary = 0x0, .flags = ARC_CAN_10MBIT, }; @@ -404,7 +532,8 @@ static struct pci_driver com20020pci_driver = { static int __init com20020pci_init(void) { - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 PCI support"); return pci_register_driver(&com20020pci_driver); } diff --git a/kernel/drivers/net/arcnet/com20020.c b/kernel/drivers/net/arcnet/com20020.c index 1a8437842..13d9ad4b3 100644 --- a/kernel/drivers/net/arcnet/com20020.c +++ b/kernel/drivers/net/arcnet/com20020.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares . @@ -25,6 +25,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -34,17 +37,16 @@ #include #include #include -#include -#include +#include -#include +#include "arcdevice.h" +#include "com20020.h" -#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n" - -static char *clockrates[] = -{"10 Mb/s", "Reserved", "5 Mb/s", - "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", - "156.25 Kb/s", "Reserved", "Reserved", "Reserved"}; +static const char * const clockrates[] = { + "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", + "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", + "Reserved", "Reserved", "Reserved" +}; static void com20020_command(struct net_device *dev, int command); static int com20020_status(struct net_device *dev); @@ -63,35 +65,38 @@ static void com20020_copy_from_card(struct net_device *dev, int bufnum, int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME("insb", count, insb(_MEMDATA, buf, count)); + TIME(dev, "insb", count, + arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } - static void com20020_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME("outsb", count, outsb(_MEMDATA, buf, count)); + TIME(dev, "outsb", count, + arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } - /* Reset the card and check some basic stuff during the detection stage. */ int com20020_check(struct net_device *dev) { int ioaddr = dev->base_addr, status; struct arcnet_local *lp = netdev_priv(dev); - ARCRESET0; + arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime); lp->setup = lp->clockm ? 0 : (lp->clockp << 1); @@ -101,49 +106,46 @@ int com20020_check(struct net_device *dev) /* Enable P1Mode for backplane mode */ lp->setup = lp->setup | P1MODE; - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + + if (lp->clockm != 0) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); - if (lp->clockm != 0) - { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); - /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2); + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ - SETCONF; - outb(0x42, ioaddr + BUS_ALIGN*7); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { - BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status); + arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); return -ENODEV; } - BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status); - - /* Enable TX */ - outb(0x39, _CONFIG); - outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7); - - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); - status = ASTATUS(); - BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n", - status); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); + arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", + status); /* Read first location of memory */ - outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(0, _ADDR_LO); - - if ((status = inb(_MEMDATA)) != TESTvalue) { - BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n", - status); + arcnet_outb(0 | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); + + status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); + if (status != TESTvalue) { + arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", + status); return -ENODEV; } return 0; @@ -156,15 +158,39 @@ static int com20020_set_hwaddr(struct net_device *dev, void *addr) struct sockaddr *hwaddr = addr; memcpy(dev->dev_addr, hwaddr->sa_data, 1); - SET_SUBADR(SUB_NODE); - outb(dev->dev_addr[0], _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_NODE); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); + + return 0; +} + +static int com20020_netdev_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + lp->config |= TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + return arcnet_open(dev); +} + +static int com20020_netdev_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct arcnet_local *lp = netdev_priv(dev); + + arcnet_close(dev); + + /* disable transmitter */ + lp->config &= ~TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); return 0; } const struct net_device_ops com20020_netdev_ops = { - .ndo_open = arcnet_open, - .ndo_stop = arcnet_close, + .ndo_open = com20020_netdev_open, + .ndo_stop = com20020_netdev_close, .ndo_start_xmit = arcnet_send_packet, .ndo_tx_timeout = arcnet_timeout, .ndo_set_mac_address = com20020_set_hwaddr, @@ -192,48 +218,54 @@ int com20020_found(struct net_device *dev, int shared) lp->hw.copy_from_card = com20020_copy_from_card; lp->hw.close = com20020_close; + /* FIXME: do this some other way! */ if (!dev->dev_addr[0]) - dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */ + dev->dev_addr[0] = arcnet_inb(ioaddr, 8); + + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + if (lp->card_flags & ARC_CAN_10MBIT) { + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); - if (lp->card_flags & ARC_CAN_10MBIT) - { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); - /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1; + lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* Default 0x38 + register: Node ID */ - SETCONF; - outb(dev->dev_addr[0], _XREG); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); /* reserve the irq */ if (request_irq(dev->irq, arcnet_interrupt, shared, "arcnet (COM20020)", dev)) { - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } dev->base_addr = ioaddr; - BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n", - lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); + arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", + lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); if (lp->backplane) - BUGMSG(D_NORMAL, "Using backplane mode.\n"); + arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); if (lp->timeout != 3) - BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout); - - BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n", - lp->setup >> 1, - clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]); + arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", + lp->timeout); + + arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", + lp->setup >> 1, + clockrates[3 - + ((lp->setup2 & 0xF0) >> 4) + + ((lp->setup & 0x0F) >> 1)]); + /* The clockrates array index looks very fragile. + * It seems like it could have negative indexing. + */ if (register_netdev(dev)) { free_irq(dev->irq, dev); @@ -242,10 +274,8 @@ int com20020_found(struct net_device *dev, int shared) return 0; } - -/* - * Do a hardware reset on the card, and set up necessary registers. - * +/* Do a hardware reset on the card, and set up necessary registers. + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * @@ -257,65 +287,71 @@ static int com20020_reset(struct net_device *dev, int really_reset) u_int ioaddr = dev->base_addr; u_char inbyte; - BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", - __FILE__,__LINE__,__func__,dev,lp,dev->name); - BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", - dev->name, ASTATUS()); + arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", + __FILE__, __LINE__, __func__, dev, lp, dev->name); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + lp->config |= (lp->timeout << 3) | (lp->backplane << 2); /* power-up defaults */ - SETCONF; - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (really_reset) { /* reset the card */ - ARCRESET; - mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */ + arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + mdelay(RESETtime * 2); + /* COM20020 seems to be slower sometimes */ } /* clear flags & end reset */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); com20020_copy_from_card(dev, 0, 0, &inbyte, 1); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (inbyte != TESTvalue) { - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); - BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", + __FILE__, __LINE__, __func__); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); - BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__); + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); + + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* done! return success. */ return 0; } - static void com20020_setmask(struct net_device *dev, int mask) { u_int ioaddr = dev->base_addr; - BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr); - AINTMASK(mask); -} + arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); + arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); +} static void com20020_command(struct net_device *dev, int cmd) { u_int ioaddr = dev->base_addr; - ACOMMAND(cmd); -} + arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); +} static int com20020_status(struct net_device *dev) { u_int ioaddr = dev->base_addr; - return ASTATUS() + (ADIAGSTATUS()<<8); + return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + + (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); } static void com20020_close(struct net_device *dev) @@ -325,7 +361,7 @@ static void com20020_close(struct net_device *dev) /* disable transmitter */ lp->config &= ~TXENcfg; - SETCONF; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } /* Set or clear the multicast filter for this adaptor. @@ -340,20 +376,20 @@ static void com20020_set_mc_list(struct net_device *dev) struct arcnet_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; - if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */ + if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { + /* Enable promiscuous mode */ if (!(lp->setup & PROMISCset)) - BUGMSG(D_NORMAL, "Setting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup |= PROMISCset; - outb(lp->setup, _XREG); - } else + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); + } else { /* Disable promiscuous mode, use normal mode */ - { if ((lp->setup & PROMISCset)) - BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup &= ~PROMISCset; - outb(lp->setup, _XREG); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } } @@ -371,7 +407,8 @@ MODULE_LICENSE("GPL"); static int __init com20020_module_init(void) { - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)"); return 0; } diff --git a/kernel/drivers/net/arcnet/com20020.h b/kernel/drivers/net/arcnet/com20020.h new file mode 100644 index 000000000..0bcc5d0a6 --- /dev/null +++ b/kernel/drivers/net/arcnet/com20020.h @@ -0,0 +1,132 @@ +/* + * Linux ARCnet driver - COM20020 chipset support - function declarations + * + * Written 1997 by David Woodhouse. + * Written 1994-1999 by Avery Pennarun. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ +#ifndef __COM20020_H +#define __COM20020_H +#include + +int com20020_check(struct net_device *dev); +int com20020_found(struct net_device *dev, int shared); +extern const struct net_device_ops com20020_netdev_ops; + +/* The number of low I/O ports used by the card. */ +#define ARCNET_TOTAL_SIZE 8 + +#define PLX_PCI_MAX_CARDS 2 + +struct ledoffsets { + int green; + int red; +}; + +struct com20020_pci_channel_map { + u32 bar; + u32 offset; + u32 size; /* 0x00 - auto, e.g. length of entire bar */ +}; + +struct com20020_pci_card_info { + const char *name; + int devcount; + + struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS]; + struct com20020_pci_channel_map misc_map; + + struct ledoffsets leds[PLX_PCI_MAX_CARDS]; + int rotary; + + unsigned int flags; +}; + +struct com20020_priv { + struct com20020_pci_card_info *ci; + struct list_head list_dev; + resource_size_t misc; +}; + +struct com20020_dev { + struct list_head list; + struct net_device *dev; + + struct led_classdev tx_led; + struct led_classdev recon_led; + + struct com20020_priv *pci_priv; + int index; +}; + +#define COM20020_REG_W_INTMASK 0 /* writable */ +#define COM20020_REG_R_STATUS 0 /* readable */ +#define COM20020_REG_W_COMMAND 1 /* standard arcnet commands */ +#define COM20020_REG_R_DIAGSTAT 1 /* diagnostic status */ +#define COM20020_REG_W_ADDR_HI 2 /* control for IO-mapped memory */ +#define COM20020_REG_W_ADDR_LO 3 +#define COM20020_REG_RW_MEMDATA 4 /* data port for IO-mapped memory */ +#define COM20020_REG_W_SUBADR 5 /* the extended port _XREG refers to */ +#define COM20020_REG_W_CONFIG 6 /* configuration */ +#define COM20020_REG_W_XREG 7 /* extra + * (indexed by _CONFIG or _SUBADDR) + */ + +/* in the ADDR_HI register */ +#define RDDATAflag 0x80 /* next access is a read (not a write) */ + +/* in the DIAGSTAT register */ +#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */ + +/* in the CONFIG register */ +#define RESETcfg 0x80 /* put card in reset state */ +#define TXENcfg 0x20 /* enable TX */ +#define XTOcfg(x) ((x) << 3) /* extended timeout */ + +/* in SETUP register */ +#define PROMISCset 0x10 /* enable RCV_ALL */ +#define P1MODE 0x80 /* enable P1-MODE for Backplane */ +#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */ + +/* COM2002x */ +#define SUB_TENTATIVE 0 /* tentative node ID */ +#define SUB_NODE 1 /* node ID */ +#define SUB_SETUP1 2 /* various options */ +#define SUB_TEST 3 /* test/diag register */ + +/* COM20022 only */ +#define SUB_SETUP2 4 /* sundry options */ +#define SUB_BUSCTL 5 /* bus control options */ +#define SUB_DMACOUNT 6 /* DMA count options */ + +static inline void com20020_set_subaddress(struct arcnet_local *lp, + int ioaddr, int val) +{ + if (val < 4) { + lp->config = (lp->config & ~0x03) | val; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + } else { + arcnet_outb(val, ioaddr, COM20020_REG_W_SUBADR); + } +} + +#endif /* __COM20020_H */ diff --git a/kernel/drivers/net/arcnet/com20020_cs.c b/kernel/drivers/net/arcnet/com20020_cs.c index 057d95821..cf607ffcf 100644 --- a/kernel/drivers/net/arcnet/com20020_cs.c +++ b/kernel/drivers/net/arcnet/com20020_cs.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 PCMCIA support - * + * * Written 1994-1999 by Avery Pennarun, * based on an ISA version by David Woodhouse. * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4) @@ -19,18 +19,21 @@ * Director, National Security Agency. This software may only be used * and distributed according to the terms of the GNU General Public License as * modified by SRC, incorporated herein by reference. - * + * * ********************** * Changes: * Arnaldo Carvalho de Melo - 08/08/2000 * - reorganize kmallocs in com20020_attach, checking all for failure * and releasing the previous allocations if one fails * ********************** - * + * * For more details, see drivers/net/arcnet.c * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -39,51 +42,44 @@ #include #include #include -#include -#include - +#include #include #include -#include - -#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n" - +#include "arcdevice.h" +#include "com20020.h" static void regdump(struct net_device *dev) { #ifdef DEBUG - int ioaddr = dev->base_addr; - int count; - - netdev_dbg(dev, "register dump:\n"); - for (count = ioaddr; count < ioaddr + 16; count++) - { - if (!(count % 16)) - pr_cont("%04X:", count); - pr_cont(" %02X", inb(count)); - } - pr_cont("\n"); - - netdev_dbg(dev, "buffer0 dump:\n"); + int ioaddr = dev->base_addr; + int count; + + netdev_dbg(dev, "register dump:\n"); + for (count = 0; count < 16; count++) { + if (!(count % 16)) + pr_cont("%04X:", ioaddr + count); + pr_cont(" %02X", arcnet_inb(ioaddr, count)); + } + pr_cont("\n"); + + netdev_dbg(dev, "buffer0 dump:\n"); /* set up the address register */ - count = 0; - outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(count & 0xff, _ADDR_LO); - - for (count = 0; count < 256+32; count++) - { - if (!(count % 16)) - pr_cont("%04X:", count); - - /* copy the data */ - pr_cont(" %02X", inb(_MEMDATA)); - } - pr_cont("\n"); -#endif -} + count = 0; + arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, com20020_REG_W_ADDR_HI); + arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); + for (count = 0; count < 256 + 32; count++) { + if (!(count % 16)) + pr_cont("%04X:", count); + /* copy the data */ + pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA)); + } + pr_cont("\n"); +#endif +} /*====================================================================*/ @@ -114,169 +110,161 @@ static void com20020_detach(struct pcmcia_device *p_dev); static int com20020_probe(struct pcmcia_device *p_dev) { - struct com20020_dev *info; - struct net_device *dev; - struct arcnet_local *lp; + struct com20020_dev *info; + struct net_device *dev; + struct arcnet_local *lp; - dev_dbg(&p_dev->dev, "com20020_attach()\n"); + dev_dbg(&p_dev->dev, "com20020_attach()\n"); - /* Create new network device */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) - goto fail_alloc_info; + /* Create new network device */ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + goto fail_alloc_info; - dev = alloc_arcdev(""); - if (!dev) - goto fail_alloc_dev; + dev = alloc_arcdev(""); + if (!dev) + goto fail_alloc_dev; - lp = netdev_priv(dev); - lp->timeout = timeout; - lp->backplane = backplane; - lp->clockp = clockp; - lp->clockm = clockm & 3; - lp->hw.owner = THIS_MODULE; + lp = netdev_priv(dev); + lp->timeout = timeout; + lp->backplane = backplane; + lp->clockp = clockp; + lp->clockm = clockm & 3; + lp->hw.owner = THIS_MODULE; - /* fill in our module parameters as defaults */ - dev->dev_addr[0] = node; + /* fill in our module parameters as defaults */ + dev->dev_addr[0] = node; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = 16; - p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->config_flags |= CONF_ENABLE_IRQ; - info->dev = dev; - p_dev->priv = info; + info->dev = dev; + p_dev->priv = info; - return com20020_config(p_dev); + return com20020_config(p_dev); fail_alloc_dev: - kfree(info); + kfree(info); fail_alloc_info: - return -ENOMEM; + return -ENOMEM; } /* com20020_attach */ static void com20020_detach(struct pcmcia_device *link) { - struct com20020_dev *info = link->priv; - struct net_device *dev = info->dev; + struct com20020_dev *info = link->priv; + struct net_device *dev = info->dev; - dev_dbg(&link->dev, "detach...\n"); + dev_dbg(&link->dev, "detach...\n"); - dev_dbg(&link->dev, "com20020_detach\n"); + dev_dbg(&link->dev, "com20020_detach\n"); - dev_dbg(&link->dev, "unregister...\n"); + dev_dbg(&link->dev, "unregister...\n"); - unregister_netdev(dev); + unregister_netdev(dev); - /* - * this is necessary because we register our IRQ separately - * from card services. - */ - if (dev->irq) - free_irq(dev->irq, dev); + /* this is necessary because we register our IRQ separately + * from card services. + */ + if (dev->irq) + free_irq(dev->irq, dev); - com20020_release(link); + com20020_release(link); - /* Unlink device structure, free bits */ - dev_dbg(&link->dev, "unlinking...\n"); - if (link->priv) - { - dev = info->dev; - if (dev) - { - dev_dbg(&link->dev, "kfree...\n"); - free_netdev(dev); + /* Unlink device structure, free bits */ + dev_dbg(&link->dev, "unlinking...\n"); + if (link->priv) { + dev = info->dev; + if (dev) { + dev_dbg(&link->dev, "kfree...\n"); + free_netdev(dev); + } + dev_dbg(&link->dev, "kfree2...\n"); + kfree(info); } - dev_dbg(&link->dev, "kfree2...\n"); - kfree(info); - } } /* com20020_detach */ static int com20020_config(struct pcmcia_device *link) { - struct arcnet_local *lp; - struct com20020_dev *info; - struct net_device *dev; - int i, ret; - int ioaddr; + struct arcnet_local *lp; + struct com20020_dev *info; + struct net_device *dev; + int i, ret; + int ioaddr; + + info = link->priv; + dev = info->dev; + + dev_dbg(&link->dev, "config...\n"); + + dev_dbg(&link->dev, "com20020_config\n"); - info = link->priv; - dev = info->dev; + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int)link->resource[0]->start); - dev_dbg(&link->dev, "config...\n"); + i = -ENODEV; + link->io_lines = 16; - dev_dbg(&link->dev, "com20020_config\n"); + if (!link->resource[0]->start) { + for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + } else { + i = pcmcia_request_io(link); + } - dev_dbg(&link->dev, "baseport1 is %Xh\n", - (unsigned int) link->resource[0]->start); + if (i != 0) { + dev_dbg(&link->dev, "requestIO failed totally!\n"); + goto failed; + } - i = -ENODEV; - link->io_lines = 16; + ioaddr = dev->base_addr = link->resource[0]->start; + dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); - if (!link->resource[0]->start) - { - for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) - { - link->resource[0]->start = ioaddr; - i = pcmcia_request_io(link); - if (i == 0) - break; + dev_dbg(&link->dev, "request IRQ %d\n", + link->irq); + if (!link->irq) { + dev_dbg(&link->dev, "requestIRQ failed totally!\n"); + goto failed; } - } - else - i = pcmcia_request_io(link); - - if (i != 0) - { - dev_dbg(&link->dev, "requestIO failed totally!\n"); - goto failed; - } - - ioaddr = dev->base_addr = link->resource[0]->start; - dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); - - dev_dbg(&link->dev, "request IRQ %d\n", - link->irq); - if (!link->irq) - { - dev_dbg(&link->dev, "requestIRQ failed totally!\n"); - goto failed; - } - - dev->irq = link->irq; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - if (com20020_check(dev)) - { - regdump(dev); - goto failed; - } - - lp = netdev_priv(dev); - lp->card_name = "PCMCIA COM20020"; - lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ - - SET_NETDEV_DEV(dev, &link->dev); - - i = com20020_found(dev, 0); /* calls register_netdev */ - - if (i != 0) { - dev_notice(&link->dev, - "com20020_found() failed\n"); - goto failed; - } - - netdev_dbg(dev, "port %#3lx, irq %d\n", - dev->base_addr, dev->irq); - return 0; + + dev->irq = link->irq; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + if (com20020_check(dev)) { + regdump(dev); + goto failed; + } + + lp = netdev_priv(dev); + lp->card_name = "PCMCIA COM20020"; + lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */ + + SET_NETDEV_DEV(dev, &link->dev); + + i = com20020_found(dev, 0); /* calls register_netdev */ + + if (i != 0) { + dev_notice(&link->dev, + "com20020_found() failed\n"); + goto failed; + } + + netdev_dbg(dev, "port %#3lx, irq %d\n", + dev->base_addr, dev->irq); + return 0; failed: - dev_dbg(&link->dev, "com20020_config failed...\n"); - com20020_release(link); - return -ENODEV; + dev_dbg(&link->dev, "com20020_config failed...\n"); + com20020_release(link); + return -ENODEV; } /* com20020_config */ static void com20020_release(struct pcmcia_device *link) @@ -304,7 +292,10 @@ static int com20020_resume(struct pcmcia_device *link) if (link->open) { int ioaddr = dev->base_addr; struct arcnet_local *lp = netdev_priv(dev); - ARCRESET; + + arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } return 0; @@ -312,9 +303,9 @@ static int com20020_resume(struct pcmcia_device *link) static const struct pcmcia_device_id com20020_ids[] = { PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", - "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), + "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf), PCMCIA_DEVICE_PROD_ID12("SoHard AG", - "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), + "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7), PCMCIA_DEVICE_NULL }; MODULE_DEVICE_TABLE(pcmcia, com20020_ids); diff --git a/kernel/drivers/net/arcnet/com9026.h b/kernel/drivers/net/arcnet/com9026.h new file mode 100644 index 000000000..efcaf6707 --- /dev/null +++ b/kernel/drivers/net/arcnet/com9026.h @@ -0,0 +1,17 @@ +#ifndef __COM9026_H +#define __COM9026_H + +/* COM 9026 controller chip --> ARCnet register addresses */ + +#define COM9026_REG_W_INTMASK 0 /* writable */ +#define COM9026_REG_R_STATUS 0 /* readable */ +#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */ +#define COM9026_REG_RW_CONFIG 2 /* Configuration register */ +#define COM9026_REG_R_RESET 8 /* software reset (on read) */ +#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */ +#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */ +#define COM9026_REG_W_ADDR_HI 15 + +#define COM9026_REG_R_STATION 1 /* Station ID */ + +#endif diff --git a/kernel/drivers/net/arcnet/com90io.c b/kernel/drivers/net/arcnet/com90io.c index 487d780eb..b57863df5 100644 --- a/kernel/drivers/net/arcnet/com90io.c +++ b/kernel/drivers/net/arcnet/com90io.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers) - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -25,6 +25,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -34,12 +37,10 @@ #include #include #include -#include -#include - - -#define VERSION "arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)\n" +#include +#include "arcdevice.h" +#include "com9026.h" /* Internal function declarations */ @@ -50,35 +51,14 @@ static void com90io_setmask(struct net_device *dev, int mask); static int com90io_reset(struct net_device *dev, int really_reset); static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); -static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count); - +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); /* Handy defines for ARCnet specific stuff */ /* The number of low I/O ports used by the card. */ #define ARCNET_TOTAL_SIZE 16 -/* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) -#define _CONFIG (ioaddr+2) /* Configuration register */ - -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) -#define SETCONF() outb((lp->config),_CONFIG) - - /**************************************************************************** * * * IO-mapped operation routines * @@ -92,58 +72,59 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset) { int ioaddr = dev->base_addr; - outb(offset >> 8, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); - return inb(_MEMDATA); + return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); } #ifdef ONE_AT_A_TIME_TX -static void put_buffer_byte(struct net_device *dev, unsigned offset, u_char datum) +static void put_buffer_byte(struct net_device *dev, unsigned offset, + u_char datum) { int ioaddr = dev->base_addr; - outb(offset >> 8, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); - outb(datum, _MEMDATA); + arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA); } #endif - -static void get_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest) +static void get_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) { int ioaddr = dev->base_addr; - outb((offset >> 8) | AUTOINCflag, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); while (length--) #ifdef ONE_AT_A_TIME_RX *(dest++) = get_buffer_byte(dev, offset++); #else - *(dest++) = inb(_MEMDATA); + *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); #endif } -static void put_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest) +static void put_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) { int ioaddr = dev->base_addr; - outb((offset >> 8) | AUTOINCflag, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO); while (length--) #ifdef ONE_AT_A_TIME_TX put_buffer_byte(dev, offset++, *(dest++)); #else - outb(*(dest++), _MEMDATA); + arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA); #endif } -/* - * We cannot probe for an IO mapped card either, although we can check that +/* We cannot probe for an IO mapped card either, although we can check that * it's where we were told it was, and even autoirq */ static int __init com90io_probe(struct net_device *dev) @@ -151,71 +132,78 @@ static int __init com90io_probe(struct net_device *dev) int ioaddr = dev->base_addr, status; unsigned long airqmask; - BUGLVL(D_NORMAL) printk(VERSION); - BUGLVL(D_NORMAL) printk("E-mail me if you actually test this driver, please!\n"); + if (BUGLVL(D_NORMAL)) { + pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)"); + pr_info("E-mail me if you actually test this driver, please!\n"); + } if (!ioaddr) { - BUGMSG(D_NORMAL, "No autoprobe for IO mapped cards; you " - "must specify the base address!\n"); + arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n"); return -ENODEV; } if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) { - BUGMSG(D_INIT_REASONS, "IO request_region %x-%x failed.\n", - ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); + arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n", + ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); return -ENXIO; } - if (ASTATUS() == 0xFF) { - BUGMSG(D_INIT_REASONS, "IO address %x empty\n", ioaddr); + if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { + arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n", + ioaddr); goto err_out; } - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { - BUGMSG(D_INIT_REASONS, "Status invalid (%Xh).\n", status); + arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n", + status); goto err_out; } - BUGMSG(D_INIT_REASONS, "Status after reset: %X\n", status); + arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM9026_REG_W_COMMAND); - BUGMSG(D_INIT_REASONS, "Status after reset acknowledged: %X\n", status); + arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n", + status); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if (status & RESETflag) { - BUGMSG(D_INIT_REASONS, "Eternal reset (status=%Xh)\n", status); + arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n", + status); goto err_out; } - outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG); + arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag, + ioaddr, COM9026_REG_RW_CONFIG); /* Read first loc'n of memory */ - outb(AUTOINCflag, _ADDR_HI); - outb(0, _ADDR_LO); + arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO); - if ((status = inb(_MEMDATA)) != 0xd1) { - BUGMSG(D_INIT_REASONS, "Signature byte not found" - " (%Xh instead).\n", status); + status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); + if (status != 0xd1) { + arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n", + status); goto err_out; } if (!dev->irq) { - /* - * if we do this, we're sure to get an IRQ since the + /* if we do this, we're sure to get an IRQ since the * card has just reset and the NORXflag is on until * we tell it to start receiving. */ airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); udelay(1); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { - BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed\n"); + arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n"); goto err_out; } } @@ -227,7 +215,6 @@ err_out: return -ENODEV; } - /* Set up the struct net_device associated with this card. Called after * probing succeeds. */ @@ -238,12 +225,14 @@ static int __init com90io_found(struct net_device *dev) int err; /* Reserve the irq */ - if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (COM90xx-IO)", dev)) { - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); + if (request_irq(dev->irq, arcnet_interrupt, 0, + "arcnet (COM90xx-IO)", dev)) { + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } /* Reserve the I/O region */ - if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, "arcnet (COM90xx-IO)")) { + if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, + "arcnet (COM90xx-IO)")) { free_irq(dev->irq, dev); return -EBUSY; } @@ -259,7 +248,7 @@ static int __init com90io_found(struct net_device *dev) lp->hw.copy_from_card = com90io_copy_from_card; lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag; - SETCONF(); + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); /* get and check the station ID from offset 1 in shmem */ @@ -267,21 +256,20 @@ static int __init com90io_found(struct net_device *dev) err = register_netdev(dev); if (err) { - outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG); + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); free_irq(dev->irq, dev); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); return err; } - BUGMSG(D_NORMAL, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", - dev->dev_addr[0], dev->base_addr, dev->irq); + arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", + dev->dev_addr[0], dev->base_addr, dev->irq); return 0; } - -/* - * Do a hardware reset on the card, and set up necessary registers. +/* Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. @@ -293,67 +281,66 @@ static int com90io_reset(struct net_device *dev, int really_reset) struct arcnet_local *lp = netdev_priv(dev); short ioaddr = dev->base_addr; - BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS()); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); if (really_reset) { /* reset the card */ - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); } /* Set the thing to IO-mapped, 8-bit mode */ lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag; - SETCONF(); + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); - ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ - ACOMMAND(CFLAGScmd | CONFIGclear); + arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + /* clear flags & end reset */ + arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ if (get_buffer_byte(dev, 0) != TESTvalue) { - BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); - + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); /* done! return success. */ return 0; } - static void com90io_command(struct net_device *dev, int cmd) { short ioaddr = dev->base_addr; - ACOMMAND(cmd); + arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); } - static int com90io_status(struct net_device *dev) { short ioaddr = dev->base_addr; - return ASTATUS(); + return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); } - static void com90io_setmask(struct net_device *dev, int mask) { short ioaddr = dev->base_addr; - AINTMASK(mask); + arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); } -static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90io_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { - TIME("put_whole_buffer", count, put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); + TIME(dev, "put_whole_buffer", count, + put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); } - -static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { - TIME("get_whole_buffer", count, get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); + TIME(dev, "get_whole_buffer", count, + get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); } static int io; /* use the insmod io= irq= shmem= options */ @@ -369,12 +356,13 @@ MODULE_LICENSE("GPL"); static int __init com90io_setup(char *s) { int ints[4]; + s = get_options(s, 4, ints); if (!ints[0]) return 0; switch (ints[0]) { default: /* ERROR */ - printk("com90io: Too many arguments.\n"); + pr_err("Too many arguments\n"); case 2: /* IRQ */ irq = ints[2]; case 1: /* IO address */ @@ -421,8 +409,11 @@ static void __exit com90io_exit(void) unregister_netdev(dev); - /* Set the thing back to MMAP mode, in case the old driver is loaded later */ - outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG); + /* In case the old driver is loaded later, + * set the thing back to MMAP mode + */ + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); free_irq(dev->irq, dev); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); diff --git a/kernel/drivers/net/arcnet/com90xx.c b/kernel/drivers/net/arcnet/com90xx.c index b80fbe40a..0d9b45ff1 100644 --- a/kernel/drivers/net/arcnet/com90xx.c +++ b/kernel/drivers/net/arcnet/com90xx.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) - * + * * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares . * Derived from skeleton.c by Donald Becker. @@ -24,6 +24,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -32,12 +35,10 @@ #include #include #include -#include -#include - - -#define VERSION "arcnet: COM90xx chipset support\n" +#include +#include "arcdevice.h" +#include "com9026.h" /* Define this to speed up the autoprobe by assuming if only one io port and * shmem are left in the list at Stage 5, they must correspond to each @@ -53,7 +54,6 @@ */ #undef FAST_PROBE - /* Internal function declarations */ static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *); static void com90xx_command(struct net_device *dev, int command); @@ -62,8 +62,8 @@ static void com90xx_setmask(struct net_device *dev, int mask); static int com90xx_reset(struct net_device *dev, int really_reset); static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); -static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count); +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); /* Known ARCnet cards */ @@ -77,26 +77,7 @@ static int numcards; /* Amount of I/O memory used by the card */ #define BUFFER_SIZE (512) -#define MIRROR_SIZE (BUFFER_SIZE*4) - -/* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _CONFIG (ioaddr+2) /* Configuration register */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) - -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) - +#define MIRROR_SIZE (BUFFER_SIZE * 4) static int com90xx_skip_probe __initdata = 0; @@ -116,8 +97,7 @@ static void __init com90xx_probe(void) { int count, status, ioaddr, numprint, airq, openparen = 0; unsigned long airqmask; - int ports[(0x3f0 - 0x200) / 16 + 1] = - {0}; + int ports[(0x3f0 - 0x200) / 16 + 1] = { 0 }; unsigned long *shmems; void __iomem **iomem; int numports, numshmems, *port; @@ -127,18 +107,19 @@ static void __init com90xx_probe(void) if (!io && !irq && !shmem && !*device && com90xx_skip_probe) return; - shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long), + shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long), GFP_KERNEL); if (!shmems) return; - iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *), - GFP_KERNEL); + iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *), + GFP_KERNEL); if (!iomem) { kfree(shmems); return; } - BUGLVL(D_NORMAL) printk(VERSION); + if (BUGLVL(D_NORMAL)) + pr_info("%s\n", "COM90xx chipset support"); /* set up the arrays where we'll store the possible probe addresses */ numports = numshmems = 0; @@ -161,38 +142,43 @@ static void __init com90xx_probe(void) numprint++; numprint %= 8; if (!numprint) { - BUGMSG2(D_INIT, "\n"); - BUGMSG2(D_INIT, "S1: "); + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S1: "); } - BUGMSG2(D_INIT, "%Xh ", *port); + arc_cont(D_INIT, "%Xh ", *port); ioaddr = *port; - if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) { - BUGMSG2(D_INIT_REASONS, "(request_region)\n"); - BUGMSG2(D_INIT_REASONS, "S1: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + if (!request_region(*port, ARCNET_TOTAL_SIZE, + "arcnet (90xx)")) { + arc_cont(D_INIT_REASONS, "(request_region)\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; *port-- = ports[--numports]; continue; } - if (ASTATUS() == 0xFF) { - BUGMSG2(D_INIT_REASONS, "(empty)\n"); - BUGMSG2(D_INIT_REASONS, "S1: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { + arc_cont(D_INIT_REASONS, "(empty)\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; release_region(*port, ARCNET_TOTAL_SIZE); *port-- = ports[--numports]; continue; } - inb(_RESET); /* begin resetting card */ + /* begin resetting card */ + arcnet_inb(ioaddr, COM9026_REG_R_RESET); - BUGMSG2(D_INIT_REASONS, "\n"); - BUGMSG2(D_INIT_REASONS, "S1: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "\n"); + arc_cont(D_INIT_REASONS, "S1: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; } - BUGMSG2(D_INIT, "\n"); + arc_cont(D_INIT, "\n"); if (!numports) { - BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n"); + arc_cont(D_NORMAL, "S1: No ARCnet cards found.\n"); kfree(shmems); kfree(iomem); return; @@ -206,12 +192,12 @@ static void __init com90xx_probe(void) numprint++; numprint %= 8; if (!numprint) { - BUGMSG2(D_INIT, "\n"); - BUGMSG2(D_INIT, "S2: "); + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S2: "); } - BUGMSG2(D_INIT, "%Xh ", *port); + arc_cont(D_INIT, "%Xh ", *port); } - BUGMSG2(D_INIT, "\n"); + arc_cont(D_INIT, "\n"); mdelay(RESETtime); /* Stage 3: abandon any shmem addresses that don't have the signature @@ -224,29 +210,33 @@ static void __init com90xx_probe(void) numprint++; numprint %= 8; if (!numprint) { - BUGMSG2(D_INIT, "\n"); - BUGMSG2(D_INIT, "S3: "); + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S3: "); } - BUGMSG2(D_INIT, "%lXh ", *p); + arc_cont(D_INIT, "%lXh ", *p); if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) { - BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n"); - BUGMSG2(D_INIT_REASONS, "Stage 3: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "(request_mem_region)\n"); + arc_cont(D_INIT_REASONS, "Stage 3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; goto out; } base = ioremap(*p, MIRROR_SIZE); if (!base) { - BUGMSG2(D_INIT_REASONS, "(ioremap)\n"); - BUGMSG2(D_INIT_REASONS, "Stage 3: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "(ioremap)\n"); + arc_cont(D_INIT_REASONS, "Stage 3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; goto out1; } - if (readb(base) != TESTvalue) { - BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n", - readb(base), TESTvalue); - BUGMSG2(D_INIT_REASONS, "S3: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) { + arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n", + arcnet_readb(base, COM9026_REG_R_STATUS), + TESTvalue); + arc_cont(D_INIT_REASONS, "S3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; goto out2; } /* By writing 0x42 to the TESTvalue location, we also make @@ -254,15 +244,16 @@ static void __init com90xx_probe(void) * in another pass through this loop, they will be discarded * because *cptr != TESTvalue. */ - writeb(0x42, base); - if (readb(base) != 0x42) { - BUGMSG2(D_INIT_REASONS, "(read only)\n"); - BUGMSG2(D_INIT_REASONS, "S3: "); + arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK); + if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) { + arc_cont(D_INIT_REASONS, "(read only)\n"); + arc_cont(D_INIT_REASONS, "S3: "); goto out2; } - BUGMSG2(D_INIT_REASONS, "\n"); - BUGMSG2(D_INIT_REASONS, "S3: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "\n"); + arc_cont(D_INIT_REASONS, "S3: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; iomem[index] = base; continue; out2: @@ -273,10 +264,10 @@ static void __init com90xx_probe(void) *p-- = shmems[--numshmems]; index--; } - BUGMSG2(D_INIT, "\n"); + arc_cont(D_INIT, "\n"); if (!numshmems) { - BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n"); + arc_cont(D_NORMAL, "S3: No ARCnet cards found.\n"); for (port = &ports[0]; port < ports + numports; port++) release_region(*port, ARCNET_TOTAL_SIZE); kfree(shmems); @@ -291,12 +282,12 @@ static void __init com90xx_probe(void) numprint++; numprint %= 8; if (!numprint) { - BUGMSG2(D_INIT, "\n"); - BUGMSG2(D_INIT, "S4: "); + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S4: "); } - BUGMSG2(D_INIT, "%lXh ", *p); + arc_cont(D_INIT, "%lXh ", *p); } - BUGMSG2(D_INIT, "\n"); + arc_cont(D_INIT, "\n"); /* Stage 5: for any ports that have the correct status, can disable * the RESET flag, and (if no irq is given) generate an autoirq, @@ -308,33 +299,37 @@ static void __init com90xx_probe(void) numprint = -1; for (port = &ports[0]; port < ports + numports; port++) { int found = 0; + numprint++; numprint %= 8; if (!numprint) { - BUGMSG2(D_INIT, "\n"); - BUGMSG2(D_INIT, "S5: "); + arc_cont(D_INIT, "\n"); + arc_cont(D_INIT, "S5: "); } - BUGMSG2(D_INIT, "%Xh ", *port); + arc_cont(D_INIT, "%Xh ", *port); ioaddr = *port; - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { - BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status); - BUGMSG2(D_INIT_REASONS, "S5: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "(status=%Xh)\n", status); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; release_region(*port, ARCNET_TOTAL_SIZE); *port-- = ports[--numports]; continue; } - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); - status = ASTATUS(); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM9026_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if (status & RESETflag) { - BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", - status); - BUGMSG2(D_INIT_REASONS, "S5: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", + status); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; release_region(*port, ARCNET_TOTAL_SIZE); *port-- = ports[--numports]; continue; @@ -348,15 +343,16 @@ static void __init com90xx_probe(void) * we tell it to start receiving. */ airqmask = probe_irq_on(); - AINTMASK(NORXflag); + arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); udelay(1); - AINTMASK(0); + arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); airq = probe_irq_off(airqmask); if (airq <= 0) { - BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq); - BUGMSG2(D_INIT_REASONS, "S5: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + arc_cont(D_INIT_REASONS, "(airq=%d)\n", airq); + arc_cont(D_INIT_REASONS, "S5: "); + if (BUGLVL(D_INIT_REASONS)) + numprint = 0; release_region(*port, ARCNET_TOTAL_SIZE); *port-- = ports[--numports]; continue; @@ -365,7 +361,7 @@ static void __init com90xx_probe(void) airq = irq; } - BUGMSG2(D_INIT, "(%d,", airq); + arc_cont(D_INIT, "(%d,", airq); openparen = 1; /* Everything seems okay. But which shmem, if any, puts @@ -376,14 +372,15 @@ static void __init com90xx_probe(void) */ #ifdef FAST_PROBE if (numports > 1 || numshmems > 1) { - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); } else { /* just one shmem and port, assume they match */ - writeb(TESTvalue, iomem[0]); + arcnet_writeb(TESTvalue, iomem[0], + COM9026_REG_W_INTMASK); } #else - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); #endif @@ -391,8 +388,8 @@ static void __init com90xx_probe(void) u_long ptr = shmems[index]; void __iomem *base = iomem[index]; - if (readb(base) == TESTvalue) { /* found one */ - BUGMSG2(D_INIT, "%lXh)\n", *p); + if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) { /* found one */ + arc_cont(D_INIT, "%lXh)\n", *p); openparen = 0; /* register the card */ @@ -405,25 +402,30 @@ static void __init com90xx_probe(void) iomem[index] = iomem[numshmems]; break; /* go to the next I/O port */ } else { - BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base)); + arc_cont(D_INIT_REASONS, "%Xh-", + arcnet_readb(base, COM9026_REG_R_STATUS)); } } if (openparen) { - BUGLVL(D_INIT) printk("no matching shmem)\n"); - BUGLVL(D_INIT_REASONS) printk("S5: "); - BUGLVL(D_INIT_REASONS) numprint = 0; + if (BUGLVL(D_INIT)) + pr_cont("no matching shmem)\n"); + if (BUGLVL(D_INIT_REASONS)) { + pr_cont("S5: "); + numprint = 0; + } } if (!found) release_region(*port, ARCNET_TOTAL_SIZE); *port-- = ports[--numports]; } - BUGLVL(D_INIT_REASONS) printk("\n"); + if (BUGLVL(D_INIT_REASONS)) + pr_cont("\n"); /* Now put back TESTvalue on all leftover shmems. */ for (index = 0; index < numshmems; index++) { - writeb(TESTvalue, iomem[index]); + arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK); iounmap(iomem[index]); release_mem_region(shmems[index], MIRROR_SIZE); } @@ -441,7 +443,7 @@ static int check_mirror(unsigned long addr, size_t size) p = ioremap(addr, size); if (p) { - if (readb(p) == TESTvalue) + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) res = 1; else res = 0; @@ -455,7 +457,8 @@ static int check_mirror(unsigned long addr, size_t size) /* Set up the struct net_device associated with this card. Called after * probing succeeds. */ -static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p) +static int __init com90xx_found(int ioaddr, int airq, u_long shmem, + void __iomem *p) { struct net_device *dev = NULL; struct arcnet_local *lp; @@ -465,7 +468,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem /* allocate struct net_device */ dev = alloc_arcdev(device); if (!dev) { - BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n"); + arc_cont(D_NORMAL, "com90xx: Can't allocate device!\n"); iounmap(p); release_mem_region(shmem, MIRROR_SIZE); return -ENOMEM; @@ -478,7 +481,7 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem * 2k (or there are no mirrors at all) but on some, it's 4k. */ mirror_size = MIRROR_SIZE; - if (readb(p) == TESTvalue && + if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) mirror_size = 2 * MIRROR_SIZE; @@ -499,12 +502,14 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem iounmap(p); release_mem_region(shmem, MIRROR_SIZE); - if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)")) + if (!request_mem_region(dev->mem_start, + dev->mem_end - dev->mem_start + 1, + "arcnet (90xx)")) goto err_free_dev; /* reserve the irq */ if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) { - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq); + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", airq); goto err_release_mem; } dev->irq = airq; @@ -518,22 +523,23 @@ static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem lp->hw.owner = THIS_MODULE; lp->hw.copy_to_card = com90xx_copy_to_card; lp->hw.copy_from_card = com90xx_copy_from_card; - lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); + lp->mem_start = ioremap(dev->mem_start, + dev->mem_end - dev->mem_start + 1); if (!lp->mem_start) { - BUGMSG(D_NORMAL, "Can't remap device memory!\n"); + arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); goto err_free_irq; } /* get and check the station ID from offset 1 in shmem */ - dev->dev_addr[0] = readb(lp->mem_start + 1); + dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION); dev->base_addr = ioaddr; - BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, " - "ShMem %lXh (%ld*%xh).\n", - dev->dev_addr[0], - dev->base_addr, dev->irq, dev->mem_start, - (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); + arc_printk(D_NORMAL, dev, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n", + dev->dev_addr[0], + dev->base_addr, dev->irq, dev->mem_start, + (dev->mem_end - dev->mem_start + 1) / mirror_size, + mirror_size); if (register_netdev(dev)) goto err_unmap; @@ -552,34 +558,29 @@ err_free_dev: return -EIO; } - static void com90xx_command(struct net_device *dev, int cmd) { short ioaddr = dev->base_addr; - ACOMMAND(cmd); + arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); } - static int com90xx_status(struct net_device *dev) { short ioaddr = dev->base_addr; - return ASTATUS(); + return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); } - static void com90xx_setmask(struct net_device *dev, int mask) { short ioaddr = dev->base_addr; - AINTMASK(mask); + arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); } - -/* - * Do a hardware reset on the card, and set up necessary registers. - * +/* Do a hardware reset on the card, and set up necessary registers. + * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * @@ -590,53 +591,58 @@ static int com90xx_reset(struct net_device *dev, int really_reset) struct arcnet_local *lp = netdev_priv(dev); short ioaddr = dev->base_addr; - BUGMSG(D_INIT, "Resetting (status=%02Xh)\n", ASTATUS()); + arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n", + arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); if (really_reset) { /* reset the card */ - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); } - ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ - ACOMMAND(CFLAGScmd | CONFIGclear); + /* clear flags & end reset */ + arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); +#if 0 /* don't do this until we verify that it doesn't hurt older cards! */ - /* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */ + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag, + ioaddr, COM9026_REG_RW_CONFIG); +#endif /* verify that the ARCnet signature byte is present */ - if (readb(lp->mem_start) != TESTvalue) { + if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) { if (really_reset) - BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); /* clean out all the memory to make debugging make more sense :) */ - BUGLVL(D_DURING) - memset_io(lp->mem_start, 0x42, 2048); + if (BUGLVL(D_DURING)) + memset_io(lp->mem_start, 0x42, 2048); /* done! return success. */ return 0; } -static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90xx_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; - TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count)); -} + TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); +} -static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; - TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); -} + TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); +} MODULE_LICENSE("GPL"); @@ -664,7 +670,8 @@ static void __exit com90xx_exit(void) free_irq(dev->irq, dev); iounmap(lp->mem_start); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); - release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); + release_mem_region(dev->mem_start, + dev->mem_end - dev->mem_start + 1); free_netdev(dev); } } @@ -679,13 +686,13 @@ static int __init com90xx_setup(char *s) s = get_options(s, 8, ints); if (!ints[0] && !*s) { - printk("com90xx: Disabled.\n"); + pr_notice("Disabled\n"); return 1; } switch (ints[0]) { default: /* ERROR */ - printk("com90xx: Too many arguments.\n"); + pr_err("Too many arguments\n"); case 3: /* Mem address */ shmem = ints[3]; case 2: /* IRQ */ diff --git a/kernel/drivers/net/arcnet/rfc1051.c b/kernel/drivers/net/arcnet/rfc1051.c index f81db4070..4b1a75469 100644 --- a/kernel/drivers/net/arcnet/rfc1051.c +++ b/kernel/drivers/net/arcnet/rfc1051.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -23,6 +23,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -30,10 +33,8 @@ #include #include #include -#include - -#define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n" +#include "arcdevice.h" static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); static void rx(struct net_device *dev, int bufnum, @@ -43,9 +44,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum); - -static struct ArcProto rfc1051_proto = -{ +static struct ArcProto rfc1051_proto = { .suffix = 's', .mtu = XMTU - RFC1051_HDR_SIZE, .is_ip = 1, @@ -56,10 +55,9 @@ static struct ArcProto rfc1051_proto = .ack_tx = NULL }; - static int __init arcnet_rfc1051_init(void) { - printk(VERSION); + pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded"); arc_proto_map[ARC_P_IP_RFC1051] = arc_proto_map[ARC_P_ARP_RFC1051] @@ -82,14 +80,13 @@ module_exit(arcnet_rfc1051_exit); MODULE_LICENSE("GPL"); -/* - * Determine a packet's protocol ID. - * +/* Determine a packet's protocol ID. + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1051 *soft = &pkt->soft.rfc1051; int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; @@ -97,9 +94,9 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) skb_reset_mac_header(skb); skb_pull(skb, hdr_size); - if (pkt->hard.dest == 0) + if (pkt->hard.dest == 0) { skb->pkt_type = PACKET_BROADCAST; - else if (dev->flags & IFF_PROMISC) { + } else if (dev->flags & IFF_PROMISC) { /* if we're not sending to ourselves :) */ if (pkt->hard.dest != dev->dev_addr[0]) skb->pkt_type = PACKET_OTHERHOST; @@ -120,7 +117,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) return htons(ETH_P_IP); } - /* packet receiver */ static void rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) @@ -130,7 +126,7 @@ static void rx(struct net_device *dev, int bufnum, struct archdr *pkt = pkthdr; int ofs; - BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length); if (length >= MinTU) ofs = 512 - length; @@ -138,15 +134,14 @@ static void rx(struct net_device *dev, int bufnum, ofs = 256 - length; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; /* up to sizeof(pkt->soft) has already been copied from the card */ memcpy(pkt, pkthdr, sizeof(struct archdr)); @@ -155,21 +150,19 @@ static void rx(struct net_device *dev, int bufnum, pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); } - -/* - * Create the ARCnet hard/soft headers for RFC1051. - */ +/* Create the ARCnet hard/soft headers for RFC1051 */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1051 *soft = &pkt->soft.rfc1051; /* set the protocol ID according to RFC1051 */ @@ -181,29 +174,26 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, soft->proto = ARC_P_ARP_RFC1051; break; default: - BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n", - type, type); + arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n", + type, type); dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; return 0; } - - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. + /* FIXME: fill in the last byte of the dest ipaddr here to + * better comply with RFC1051 in "noarp" mode. */ pkt->hard.dest = 0; return hdr_size; @@ -214,7 +204,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, return hdr_size; /* success */ } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -222,15 +211,16 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, struct arc_hardware *hard = &pkt->hard; int ofs; - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; if (length > XMTU) { /* should never happen! other people already check for this. */ - BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n", - length, XMTU); + arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n", + length, XMTU); length = XMTU; } if (length > MinTU) { @@ -239,8 +229,9 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, } else if (length > MTU) { hard->offset[0] = 0; hard->offset[1] = ofs = 512 - length - 3; - } else + } else { hard->offset[0] = ofs = 256 - length; + } lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length); diff --git a/kernel/drivers/net/arcnet/rfc1201.c b/kernel/drivers/net/arcnet/rfc1201.c index b71431aae..566da5ecd 100644 --- a/kernel/drivers/net/arcnet/rfc1201.c +++ b/kernel/drivers/net/arcnet/rfc1201.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - RFC1201 (standard) packet encapsulation - * + * * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. * @@ -23,17 +23,19 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include #include #include #include -#include -MODULE_LICENSE("GPL"); -#define VERSION "arcnet: RFC1201 \"standard\" (`a') encapsulation support loaded.\n" +#include "arcdevice.h" +MODULE_LICENSE("GPL"); static __be16 type_trans(struct sk_buff *skb, struct net_device *dev); static void rx(struct net_device *dev, int bufnum, @@ -44,8 +46,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum); static int continue_tx(struct net_device *dev, int bufnum); -static struct ArcProto rfc1201_proto = -{ +static struct ArcProto rfc1201_proto = { .suffix = 'a', .mtu = 1500, /* could be more, but some receivers can't handle it... */ .is_ip = 1, /* This is for sending IP and ARP packages */ @@ -56,10 +57,9 @@ static struct ArcProto rfc1201_proto = .ack_tx = NULL }; - static int __init arcnet_rfc1201_init(void) { - printk(VERSION); + pr_info("%s\n", "RFC1201 \"standard\" (`a') encapsulation support loaded"); arc_proto_map[ARC_P_IP] = arc_proto_map[ARC_P_IPV6] @@ -84,14 +84,13 @@ static void __exit arcnet_rfc1201_exit(void) module_init(arcnet_rfc1201_init); module_exit(arcnet_rfc1201_exit); -/* - * Determine a packet's protocol ID. - * +/* Determine a packet's protocol ID. + * * With ARCnet we have to convert everything to Ethernet-style stuff. */ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) { - struct archdr *pkt = (struct archdr *) skb->data; + struct archdr *pkt = (struct archdr *)skb->data; struct arc_rfc1201 *soft = &pkt->soft.rfc1201; int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; @@ -99,9 +98,9 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) skb_reset_mac_header(skb); skb_pull(skb, hdr_size); - if (pkt->hard.dest == 0) + if (pkt->hard.dest == 0) { skb->pkt_type = PACKET_BROADCAST; - else if (dev->flags & IFF_PROMISC) { + } else if (dev->flags & IFF_PROMISC) { /* if we're not sending to ourselves :) */ if (pkt->hard.dest != dev->dev_addr[0]) skb->pkt_type = PACKET_OTHERHOST; @@ -129,7 +128,6 @@ static __be16 type_trans(struct sk_buff *skb, struct net_device *dev) return htons(ETH_P_IP); } - /* packet receiver */ static void rx(struct net_device *dev, int bufnum, struct archdr *pkthdr, int length) @@ -141,7 +139,8 @@ static void rx(struct net_device *dev, int bufnum, int saddr = pkt->hard.source, ofs; struct Incoming *in = &lp->rfc1201.incoming[saddr]; - BUGMSG(D_DURING, "it's an RFC1201 packet (length=%d)\n", length); + arc_printk(D_DURING, dev, "it's an RFC1201 packet (length=%d)\n", + length); if (length >= MinTU) ofs = 512 - length; @@ -149,11 +148,11 @@ static void rx(struct net_device *dev, int bufnum, ofs = 256 - length; if (soft->split_flag == 0xFF) { /* Exception Packet */ - if (length >= 4 + RFC1201_HDR_SIZE) - BUGMSG(D_DURING, "compensating for exception packet\n"); - else { - BUGMSG(D_EXTRA, "short RFC1201 exception packet from %02Xh", - saddr); + if (length >= 4 + RFC1201_HDR_SIZE) { + arc_printk(D_DURING, dev, "compensating for exception packet\n"); + } else { + arc_printk(D_EXTRA, dev, "short RFC1201 exception packet from %02Xh", + saddr); return; } @@ -164,12 +163,13 @@ static void rx(struct net_device *dev, int bufnum, soft, sizeof(pkt->soft)); } if (!soft->split_flag) { /* not split */ - BUGMSG(D_RX, "incoming is not split (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_RX, dev, "incoming is not split (splitflag=%d)\n", + soft->split_flag); if (in->skb) { /* already assembling one! */ - BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, soft->sequence); + arc_printk(D_EXTRA, dev, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); lp->rfc1201.aborted_seq = soft->sequence; dev_kfree_skb_irq(in->skb); dev->stats.rx_errors++; @@ -179,82 +179,86 @@ static void rx(struct net_device *dev, int bufnum, in->sequence = soft->sequence; skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n"); + if (!skb) { dev->stats.rx_dropped++; return; } skb_put(skb, length + ARC_HDR_SIZE); skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; - /* up to sizeof(pkt->soft) has already been copied from the card */ + /* up to sizeof(pkt->soft) has already + * been copied from the card + */ memcpy(pkt, pkthdr, sizeof(struct archdr)); if (length > sizeof(pkt->soft)) - lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft), - pkt->soft.raw + sizeof(pkt->soft), + lp->hw.copy_from_card(dev, bufnum, + ofs + sizeof(pkt->soft), + pkt->soft.raw + sizeof(pkt->soft), length - sizeof(pkt->soft)); - /* - * ARP packets have problems when sent from some DOS systems: the - * source address is always 0! So we take the hardware source addr - * (which is impossible to fumble) and insert it ourselves. + /* ARP packets have problems when sent from some DOS systems: + * the source address is always 0! + * So we take the hardware source addr (which is impossible + * to fumble) and insert it ourselves. */ if (soft->proto == ARC_P_ARP) { - struct arphdr *arp = (struct arphdr *) soft->payload; + struct arphdr *arp = (struct arphdr *)soft->payload; /* make sure addresses are the right length */ if (arp->ar_hln == 1 && arp->ar_pln == 4) { - uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr); + uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr); if (!*cptr) { /* is saddr = 00? */ - BUGMSG(D_EXTRA, - "ARP source address was 00h, set to %02Xh.\n", - saddr); + arc_printk(D_EXTRA, dev, + "ARP source address was 00h, set to %02Xh\n", + saddr); dev->stats.rx_crc_errors++; *cptr = saddr; } else { - BUGMSG(D_DURING, "ARP source address (%Xh) is fine.\n", - *cptr); + arc_printk(D_DURING, dev, "ARP source address (%Xh) is fine.\n", + *cptr); } } else { - BUGMSG(D_NORMAL, "funny-shaped ARP packet. (%Xh, %Xh)\n", - arp->ar_hln, arp->ar_pln); + arc_printk(D_NORMAL, dev, "funny-shaped ARP packet. (%Xh, %Xh)\n", + arp->ar_hln, arp->ar_pln); dev->stats.rx_errors++; dev->stats.rx_crc_errors++; } } - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); } else { /* split packet */ - /* - * NOTE: MSDOS ARP packet correction should only need to apply to - * unsplit packets, since ARP packets are so short. + /* NOTE: MSDOS ARP packet correction should only need to + * apply to unsplit packets, since ARP packets are so short. * - * My interpretation of the RFC1201 document is that if a packet is - * received out of order, the entire assembly process should be - * aborted. + * My interpretation of the RFC1201 document is that if a + * packet is received out of order, the entire assembly + * process should be aborted. * - * The RFC also mentions "it is possible for successfully received - * packets to be retransmitted." As of 0.40 all previously received - * packets are allowed, not just the most recent one. + * The RFC also mentions "it is possible for successfully + * received packets to be retransmitted." As of 0.40 all + * previously received packets are allowed, not just the + * most recent one. * - * We allow multiple assembly processes, one for each ARCnet card - * possible on the network. Seems rather like a waste of memory, - * but there's no other way to be reliable. + * We allow multiple assembly processes, one for each + * ARCnet card possible on the network. + * Seems rather like a waste of memory, but there's no + * other way to be reliable. */ - BUGMSG(D_RX, "packet is split (splitflag=%d, seq=%d)\n", - soft->split_flag, in->sequence); + arc_printk(D_RX, dev, "packet is split (splitflag=%d, seq=%d)\n", + soft->split_flag, in->sequence); if (in->skb && in->sequence != soft->sequence) { - BUGMSG(D_EXTRA, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n", - saddr, in->sequence, soft->sequence, - soft->split_flag); + arc_printk(D_EXTRA, dev, "wrong seq number (saddr=%d, expected=%d, seq=%d, splitflag=%d)\n", + saddr, in->sequence, soft->sequence, + soft->split_flag); dev_kfree_skb_irq(in->skb); in->skb = NULL; dev->stats.rx_errors++; @@ -262,24 +266,23 @@ static void rx(struct net_device *dev, int bufnum, in->lastpacket = in->numpackets = 0; } if (soft->split_flag & 1) { /* first packet in split */ - BUGMSG(D_RX, "brand new splitpacket (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_RX, dev, "brand new splitpacket (splitflag=%d)\n", + soft->split_flag); if (in->skb) { /* already assembling one! */ - BUGMSG(D_EXTRA, "aborting previous (seq=%d) assembly " - "(splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, - soft->sequence); + arc_printk(D_EXTRA, dev, "aborting previous (seq=%d) assembly (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); dev->stats.rx_errors++; dev->stats.rx_missed_errors++; dev_kfree_skb_irq(in->skb); } in->sequence = soft->sequence; - in->numpackets = ((unsigned) soft->split_flag >> 1) + 2; + in->numpackets = ((unsigned)soft->split_flag >> 1) + 2; in->lastpacket = 1; if (in->numpackets > 16) { - BUGMSG(D_EXTRA, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_EXTRA, dev, "incoming packet more than 16 segments; dropping. (splitflag=%d)\n", + soft->split_flag); lp->rfc1201.aborted_seq = soft->sequence; dev->stats.rx_errors++; dev->stats.rx_length_errors++; @@ -287,14 +290,14 @@ static void rx(struct net_device *dev, int bufnum, } in->skb = skb = alloc_skb(508 * in->numpackets + ARC_HDR_SIZE, GFP_ATOMIC); - if (skb == NULL) { - BUGMSG(D_NORMAL, "(split) memory squeeze, dropping packet.\n"); + if (!skb) { + arc_printk(D_NORMAL, dev, "(split) memory squeeze, dropping packet.\n"); lp->rfc1201.aborted_seq = soft->sequence; dev->stats.rx_dropped++; return; } skb->dev = dev; - pkt = (struct archdr *) skb->data; + pkt = (struct archdr *)skb->data; soft = &pkt->soft.rfc1201; memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE); @@ -302,37 +305,37 @@ static void rx(struct net_device *dev, int bufnum, soft->split_flag = 0; /* end result won't be split */ } else { /* not first packet */ - int packetnum = ((unsigned) soft->split_flag >> 1) + 1; + int packetnum = ((unsigned)soft->split_flag >> 1) + 1; - /* - * if we're not assembling, there's no point trying to + /* if we're not assembling, there's no point trying to * continue. */ if (!in->skb) { if (lp->rfc1201.aborted_seq != soft->sequence) { - BUGMSG(D_EXTRA, "can't continue split without starting " - "first! (splitflag=%d, seq=%d, aborted=%d)\n", - soft->split_flag, soft->sequence, - lp->rfc1201.aborted_seq); + arc_printk(D_EXTRA, dev, "can't continue split without starting first! (splitflag=%d, seq=%d, aborted=%d)\n", + soft->split_flag, + soft->sequence, + lp->rfc1201.aborted_seq); dev->stats.rx_errors++; dev->stats.rx_missed_errors++; } return; } in->lastpacket++; - if (packetnum != in->lastpacket) { /* not the right flag! */ + /* if not the right flag */ + if (packetnum != in->lastpacket) { /* harmless duplicate? ignore. */ if (packetnum <= in->lastpacket - 1) { - BUGMSG(D_EXTRA, "duplicate splitpacket ignored! (splitflag=%d)\n", - soft->split_flag); + arc_printk(D_EXTRA, dev, "duplicate splitpacket ignored! (splitflag=%d)\n", + soft->split_flag); dev->stats.rx_errors++; dev->stats.rx_frame_errors++; return; } /* "bad" duplicate, kill reassembly */ - BUGMSG(D_EXTRA, "out-of-order splitpacket, reassembly " - "(seq=%d) aborted (splitflag=%d, seq=%d)\n", - in->sequence, soft->split_flag, soft->sequence); + arc_printk(D_EXTRA, dev, "out-of-order splitpacket, reassembly (seq=%d) aborted (splitflag=%d, seq=%d)\n", + in->sequence, soft->split_flag, + soft->sequence); lp->rfc1201.aborted_seq = soft->sequence; dev_kfree_skb_irq(in->skb); in->skb = NULL; @@ -341,7 +344,7 @@ static void rx(struct net_device *dev, int bufnum, in->lastpacket = in->numpackets = 0; return; } - pkt = (struct archdr *) in->skb->data; + pkt = (struct archdr *)in->skb->data; soft = &pkt->soft.rfc1201; } @@ -357,11 +360,12 @@ static void rx(struct net_device *dev, int bufnum, in->skb = NULL; in->lastpacket = in->numpackets = 0; - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n", - skb->len, pkt->hard.source); - BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n", - skb->len, pkt->hard.source); - BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx"); + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (unsplit)\n", + skb->len, pkt->hard.source); + arc_printk(D_SKB_SIZE, dev, "skb: received %d bytes from %02X (split)\n", + skb->len, pkt->hard.source); + if (BUGLVL(D_SKB)) + arcnet_dump_skb(dev, skb, "rx"); skb->protocol = type_trans(skb, dev); netif_rx(skb); @@ -369,14 +373,13 @@ static void rx(struct net_device *dev, int bufnum, } } - /* Create the ARCnet hard/soft headers for RFC1201. */ static int build_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, uint8_t daddr) { struct arcnet_local *lp = netdev_priv(dev); int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE; - struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size); + struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size); struct arc_rfc1201 *soft = &pkt->soft.rfc1201; /* set the protocol ID according to RFC1201 */ @@ -402,19 +405,18 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, soft->proto = ARC_P_ATALK; break; default: - BUGMSG(D_NORMAL, "RFC1201: I don't understand protocol %d (%Xh)\n", - type, type); + arc_printk(D_NORMAL, dev, "RFC1201: I don't understand protocol %d (%Xh)\n", + type, type); dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; return 0; } - /* - * Set the source hardware address. + /* Set the source hardware address. * * This is pretty pointless for most purposes, but it can help in - * debugging. ARCnet does not allow us to change the source address in - * the actual packet sent) + * debugging. ARCnet does not allow us to change the source address + * in the actual packet sent. */ pkt->hard.source = *dev->dev_addr; @@ -424,10 +426,10 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, /* see linux/net/ethernet/eth.c to see where I got the following */ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { - /* - * FIXME: fill in the last byte of the dest ipaddr here to better - * comply with RFC1051 in "noarp" mode. For now, always broadcasting - * will probably at least get packets sent out :) + /* FIXME: fill in the last byte of the dest ipaddr here + * to better comply with RFC1051 in "noarp" mode. + * For now, always broadcasting will probably at least get + * packets sent out :) */ pkt->hard.dest = 0; return hdr_size; @@ -437,7 +439,6 @@ static int build_header(struct sk_buff *skb, struct net_device *dev, return hdr_size; } - static void load_pkt(struct net_device *dev, struct arc_hardware *hard, struct arc_rfc1201 *soft, int softlen, int bufnum) { @@ -461,8 +462,9 @@ static void load_pkt(struct net_device *dev, struct arc_hardware *hard, hard->offset[1] = ofs - RFC1201_HDR_SIZE; lp->hw.copy_to_card(dev, bufnum, ofs - RFC1201_HDR_SIZE, &excsoft, RFC1201_HDR_SIZE); - } else + } else { hard->offset[0] = ofs = 256 - softlen; + } lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE); lp->hw.copy_to_card(dev, bufnum, ofs, soft, softlen); @@ -470,7 +472,6 @@ static void load_pkt(struct net_device *dev, struct arc_hardware *hard, lp->lastload_dest = hard->dest; } - static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, int bufnum) { @@ -478,11 +479,11 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, const int maxsegsize = XMTU - RFC1201_HDR_SIZE; struct Outgoing *out; + arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n", + lp->next_tx, lp->cur_tx, bufnum); - BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n", - lp->next_tx, lp->cur_tx, bufnum); - - length -= ARC_HDR_SIZE; /* hard header is not included in packet length */ + /* hard header is not included in packet length */ + length -= ARC_HDR_SIZE; pkt->soft.rfc1201.split_flag = 0; /* need to do a split packet? */ @@ -494,9 +495,9 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, out->numsegs = (out->dataleft + maxsegsize - 1) / maxsegsize; out->segnum = 0; - BUGMSG(D_DURING, "rfc1201 prep_tx: ready for %d-segment split " - "(%d bytes, seq=%d)\n", out->numsegs, out->length, - pkt->soft.rfc1201.sequence); + arc_printk(D_DURING, dev, "rfc1201 prep_tx: ready for %d-segment split (%d bytes, seq=%d)\n", + out->numsegs, out->length, + pkt->soft.rfc1201.sequence); return 0; /* not done */ } @@ -506,7 +507,6 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length, return 1; /* done */ } - static int continue_tx(struct net_device *dev, int bufnum) { struct arcnet_local *lp = netdev_priv(dev); @@ -516,9 +516,9 @@ static int continue_tx(struct net_device *dev, int bufnum) int maxsegsize = XMTU - RFC1201_HDR_SIZE; int seglen; - BUGMSG(D_DURING, - "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", - out->segnum, out->numsegs, soft->sequence); + arc_printk(D_DURING, dev, + "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n", + out->segnum, out->numsegs, soft->sequence); /* the "new" soft header comes right before the data chunk */ newsoft = (struct arc_rfc1201 *) -- cgit 1.2.3-korg