From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/mmc/host/mmci.c | 1922 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1922 insertions(+) create mode 100644 kernel/drivers/mmc/host/mmci.c (limited to 'kernel/drivers/mmc/host/mmci.c') diff --git a/kernel/drivers/mmc/host/mmci.c b/kernel/drivers/mmc/host/mmci.c new file mode 100644 index 000000000..d42fc084d --- /dev/null +++ b/kernel/drivers/mmc/host/mmci.c @@ -0,0 +1,1922 @@ +/* + * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * Copyright (C) 2010 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "mmci.h" +#include "mmci_qcom_dml.h" + +#define DRIVER_NAME "mmci-pl18x" + +static unsigned int fmax = 515633; + +/** + * struct variant_data - MMCI variant-specific quirks + * @clkreg: default value for MCICLOCK register + * @clkreg_enable: enable value for MMCICLOCK register + * @clkreg_8bit_bus_enable: enable value for 8 bit bus + * @clkreg_neg_edge_enable: enable value for inverted data/cmd output + * @datalength_bits: number of bits in the MMCIDATALENGTH register + * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY + * is asserted (likewise for RX) + * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY + * is asserted (likewise for RX) + * @data_cmd_enable: enable value for data commands. + * @st_sdio: enable ST specific SDIO logic + * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register + * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl + * register + * @datactrl_mask_sdio: SDIO enable mask in datactrl register + * @pwrreg_powerup: power up value for MMCIPOWER register + * @f_max: maximum clk frequency supported by the controller. + * @signal_direction: input/out direction of bus signals can be indicated + * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock + * @busy_detect: true if busy detection on dat0 is supported + * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply + * @explicit_mclk_control: enable explicit mclk control in driver. + * @qcom_fifo: enables qcom specific fifo pio read logic. + * @qcom_dml: enables qcom specific dma glue for dma transfers. + * @reversed_irq_handling: handle data irq before cmd irq. + */ +struct variant_data { + unsigned int clkreg; + unsigned int clkreg_enable; + unsigned int clkreg_8bit_bus_enable; + unsigned int clkreg_neg_edge_enable; + unsigned int datalength_bits; + unsigned int fifosize; + unsigned int fifohalfsize; + unsigned int data_cmd_enable; + unsigned int datactrl_mask_ddrmode; + unsigned int datactrl_mask_sdio; + bool st_sdio; + bool st_clkdiv; + bool blksz_datactrl16; + bool blksz_datactrl4; + u32 pwrreg_powerup; + u32 f_max; + bool signal_direction; + bool pwrreg_clkgate; + bool busy_detect; + bool pwrreg_nopower; + bool explicit_mclk_control; + bool qcom_fifo; + bool qcom_dml; + bool reversed_irq_handling; +}; + +static struct variant_data variant_arm = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, + .reversed_irq_handling = true, +}; + +static struct variant_data variant_arm_extended_fifo = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, +}; + +static struct variant_data variant_arm_extended_fifo_hwfc = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .clkreg_enable = MCI_ARM_HWFCEN, + .datalength_bits = 16, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, +}; + +static struct variant_data variant_u300 = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg_enable = MCI_ST_U300_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .datalength_bits = 16, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, + .st_sdio = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, +}; + +static struct variant_data variant_nomadik = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, +}; + +static struct variant_data variant_ux500 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .pwrreg_nopower = true, +}; + +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE, + .datalength_bits = 24, + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .blksz_datactrl16 = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .pwrreg_nopower = true, +}; + +static struct variant_data variant_qcom = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_QCOM_CLK_FLOWENA | + MCI_QCOM_CLK_SELECT_IN_FBCLK, + .clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8, + .datactrl_mask_ddrmode = MCI_QCOM_CLK_SELECT_IN_DDR_MODE, + .data_cmd_enable = MCI_QCOM_CSPM_DATCMD, + .blksz_datactrl4 = true, + .datalength_bits = 24, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 208000000, + .explicit_mclk_control = true, + .qcom_fifo = true, + .qcom_dml = true, +}; + +static int mmci_card_busy(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + int busy = 0; + + pm_runtime_get_sync(mmc_dev(mmc)); + + spin_lock_irqsave(&host->lock, flags); + if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY) + busy = 1; + spin_unlock_irqrestore(&host->lock, flags); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + + return busy; +} + +/* + * Validate mmc prerequisites + */ +static int mmci_validate_data(struct mmci_host *host, + struct mmc_data *data) +{ + if (!data) + return 0; + + if (!is_power_of_2(data->blksz)) { + dev_err(mmc_dev(host->mmc), + "unsupported block size (%d bytes)\n", data->blksz); + return -EINVAL; + } + + return 0; +} + +static void mmci_reg_delay(struct mmci_host *host) +{ + /* + * According to the spec, at least three feedback clock cycles + * of max 52 MHz must pass between two writes to the MMCICLOCK reg. + * Three MCLK clock cycles must pass between two MMCIPOWER reg writes. + * Worst delay time during card init is at 100 kHz => 30 us. + * Worst delay time when up and running is at 25 MHz => 120 ns. + */ + if (host->cclk < 25000000) + udelay(30); + else + ndelay(120); +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_clkreg(struct mmci_host *host, u32 clk) +{ + if (host->clk_reg != clk) { + host->clk_reg = clk; + writel(clk, host->base + MMCICLOCK); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr) +{ + if (host->pwr_reg != pwr) { + host->pwr_reg = pwr; + writel(pwr, host->base + MMCIPOWER); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl) +{ + /* Keep ST Micro busy mode if enabled */ + datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE; + + if (host->datactrl_reg != datactrl) { + host->datactrl_reg = datactrl; + writel(datactrl, host->base + MMCIDATACTRL); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) +{ + struct variant_data *variant = host->variant; + u32 clk = variant->clkreg; + + /* Make sure cclk reflects the current calculated clock */ + host->cclk = 0; + + if (desired) { + if (variant->explicit_mclk_control) { + host->cclk = host->mclk; + } else if (desired >= host->mclk) { + clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; + host->cclk = host->mclk; + } else if (variant->st_clkdiv) { + /* + * DB8500 TRM says f = mclk / (clkdiv + 2) + * => clkdiv = (mclk / f) - 2 + * Round the divider up so we don't exceed the max + * frequency + */ + clk = DIV_ROUND_UP(host->mclk, desired) - 2; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (clk + 2); + } else { + /* + * PL180 TRM says f = mclk / (2 * (clkdiv + 1)) + * => clkdiv = mclk / (2 * f) - 1 + */ + clk = host->mclk / (2 * desired) - 1; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (2 * (clk + 1)); + } + + clk |= variant->clkreg_enable; + clk |= MCI_CLK_ENABLE; + /* This hasn't proven to be worthwhile */ + /* clk |= MCI_CLK_PWRSAVE; */ + } + + /* Set actual clock for debug */ + host->mmc->actual_clock = host->cclk; + + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) + clk |= MCI_4BIT_BUS; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) + clk |= variant->clkreg_8bit_bus_enable; + + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + clk |= variant->clkreg_neg_edge_enable; + + mmci_write_clkreg(host, clk); +} + +static void +mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) +{ + writel(0, host->base + MMCICOMMAND); + + BUG_ON(host->data); + + host->mrq = NULL; + host->cmd = NULL; + + mmc_request_done(host->mmc, mrq); + + pm_runtime_mark_last_busy(mmc_dev(host->mmc)); + pm_runtime_put_autosuspend(mmc_dev(host->mmc)); +} + +static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) +{ + void __iomem *base = host->base; + + if (host->singleirq) { + unsigned int mask0 = readl(base + MMCIMASK0); + + mask0 &= ~MCI_IRQ1MASK; + mask0 |= mask; + + writel(mask0, base + MMCIMASK0); + } + + writel(mask, base + MMCIMASK1); +} + +static void mmci_stop_data(struct mmci_host *host) +{ + mmci_write_datactrlreg(host, 0); + mmci_set_mask1(host, 0); + host->data = NULL; +} + +static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) +{ + unsigned int flags = SG_MITER_ATOMIC; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +static void mmci_dma_setup(struct mmci_host *host) +{ + const char *rxname, *txname; + struct variant_data *variant = host->variant; + + host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + + /* initialize pre request cookie */ + host->next_data.cookie = 1; + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (host->dma_rx_channel && !host->dma_tx_channel) + host->dma_tx_channel = host->dma_rx_channel; + + if (host->dma_rx_channel) + rxname = dma_chan_name(host->dma_rx_channel); + else + rxname = "none"; + + if (host->dma_tx_channel) + txname = dma_chan_name(host->dma_tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (host->dma_tx_channel) { + struct device *dev = host->dma_tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (host->dma_rx_channel) { + struct device *dev = host->dma_rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + + if (variant->qcom_dml && host->dma_rx_channel && host->dma_tx_channel) + if (dml_hw_init(host, host->mmc->parent->of_node)) + variant->qcom_dml = false; +} + +/* + * This is used in or so inline it + * so it can be discarded. + */ +static inline void mmci_dma_release(struct mmci_host *host) +{ + if (host->dma_rx_channel) + dma_release_channel(host->dma_rx_channel); + if (host->dma_tx_channel) + dma_release_channel(host->dma_tx_channel); + host->dma_rx_channel = host->dma_tx_channel = NULL; +} + +static void mmci_dma_data_error(struct mmci_host *host) +{ + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(host->dma_current); + host->dma_current = NULL; + host->dma_desc_current = NULL; + host->data->host_cookie = 0; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct dma_chan *chan; + enum dma_data_direction dir; + + if (data->flags & MMC_DATA_READ) { + dir = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + dir = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir); +} + +static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) +{ + u32 status; + int i; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + mmci_dma_data_error(host); + if (!data->error) + data->error = -EIO; + } + + if (!data->host_cookie) + mmci_dma_unmap(host, data); + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } + + host->dma_current = NULL; + host->dma_desc_current = NULL; +} + +/* prepares DMA channel and DMA descriptor, returns non-zero on failure */ +static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, + struct dma_chan **dma_chan, + struct dma_async_tx_descriptor **dma_desc) +{ + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .device_fc = false, + }; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + enum dma_data_direction buffer_dirn; + int nr_sg; + unsigned long flags = DMA_CTRL_ACK; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_DEV_TO_MEM; + buffer_dirn = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + conf.direction = DMA_MEM_TO_DEV; + buffer_dirn = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (data->blksz * data->blocks <= variant->fifosize) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, buffer_dirn); + if (nr_sg == 0) + return -EINVAL; + + if (host->variant->qcom_dml) + flags |= DMA_PREP_INTERRUPT; + + dmaengine_slave_config(chan, &conf); + desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, flags); + if (!desc) + goto unmap_exit; + + *dma_chan = chan; + *dma_desc = desc; + + return 0; + + unmap_exit: + dma_unmap_sg(device->dev, data->sg, data->sg_len, buffer_dirn); + return -ENOMEM; +} + +static inline int mmci_dma_prep_data(struct mmci_host *host, + struct mmc_data *data) +{ + /* Check if next job is already prepared. */ + if (host->dma_current && host->dma_desc_current) + return 0; + + /* No job were prepared thus do it now. */ + return __mmci_dma_prep_data(host, data, &host->dma_current, + &host->dma_desc_current); +} + +static inline int mmci_dma_prep_next(struct mmci_host *host, + struct mmc_data *data) +{ + struct mmci_host_next *nd = &host->next_data; + return __mmci_dma_prep_data(host, data, &nd->dma_chan, &nd->dma_desc); +} + +static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + int ret; + struct mmc_data *data = host->data; + + ret = mmci_dma_prep_data(host, host->data); + if (ret) + return ret; + + /* Okay, go for it. */ + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + dmaengine_submit(host->dma_desc_current); + dma_async_issue_pending(host->dma_current); + + if (host->variant->qcom_dml) + dml_start_xfer(host, data); + + datactrl |= MCI_DPSM_DMAENABLE; + + /* Trigger the DMA transfer */ + mmci_write_datactrlreg(host, datactrl); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; +} + +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ + struct mmci_host_next *next = &host->next_data; + + WARN_ON(data->host_cookie && data->host_cookie != next->cookie); + WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan)); + + host->dma_desc_current = next->dma_desc; + host->dma_current = next->dma_chan; + next->dma_desc = NULL; + next->dma_chan = NULL; +} + +static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq, + bool is_first_req) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + struct mmci_host_next *nd = &host->next_data; + + if (!data) + return; + + BUG_ON(data->host_cookie); + + if (mmci_validate_data(host, data)) + return; + + if (!mmci_dma_prep_next(host, data)) + data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie; +} + +static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq, + int err) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!data || !data->host_cookie) + return; + + mmci_dma_unmap(host, data); + + if (err) { + struct mmci_host_next *next = &host->next_data; + struct dma_chan *chan; + if (data->flags & MMC_DATA_READ) + chan = host->dma_rx_channel; + else + chan = host->dma_tx_channel; + dmaengine_terminate_all(chan); + + if (host->dma_desc_current == next->dma_desc) + host->dma_desc_current = NULL; + + if (host->dma_current == next->dma_chan) + host->dma_current = NULL; + + next->dma_desc = NULL; + next->dma_chan = NULL; + data->host_cookie = 0; + } +} + +#else +/* Blank functions if the DMA engine is not available */ +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ +} +static inline void mmci_dma_setup(struct mmci_host *host) +{ +} + +static inline void mmci_dma_release(struct mmci_host *host) +{ +} + +static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ +} + +static inline void mmci_dma_finalize(struct mmci_host *host, + struct mmc_data *data) +{ +} + +static inline void mmci_dma_data_error(struct mmci_host *host) +{ +} + +static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + return -ENOSYS; +} + +#define mmci_pre_request NULL +#define mmci_post_request NULL + +#endif + +static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) +{ + struct variant_data *variant = host->variant; + unsigned int datactrl, timeout, irqmask; + unsigned long long clks; + void __iomem *base; + int blksz_bits; + + dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n", + data->blksz, data->blocks, data->flags); + + host->data = data; + host->size = data->blksz * data->blocks; + data->bytes_xfered = 0; + + clks = (unsigned long long)data->timeout_ns * host->cclk; + do_div(clks, NSEC_PER_SEC); + + timeout = data->timeout_clks + (unsigned int)clks; + + base = host->base; + writel(timeout, base + MMCIDATATIMER); + writel(host->size, base + MMCIDATALENGTH); + + blksz_bits = ffs(data->blksz) - 1; + BUG_ON(1 << blksz_bits != data->blksz); + + if (variant->blksz_datactrl16) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else if (variant->blksz_datactrl4) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 4); + else + datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; + + if (data->flags & MMC_DATA_READ) + datactrl |= MCI_DPSM_DIRECTION; + + if (host->mmc->card && mmc_card_sdio(host->mmc->card)) { + u32 clk; + + datactrl |= variant->datactrl_mask_sdio; + + /* + * The ST Micro variant for SDIO small write transfers + * needs to have clock H/W flow control disabled, + * otherwise the transfer will not start. The threshold + * depends on the rate of MCLK. + */ + if (variant->st_sdio && data->flags & MMC_DATA_WRITE && + (host->size < 8 || + (host->size <= 8 && host->mclk > 50000000))) + clk = host->clk_reg & ~variant->clkreg_enable; + else + clk = host->clk_reg | variant->clkreg_enable; + + mmci_write_clkreg(host, clk); + } + + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + datactrl |= variant->datactrl_mask_ddrmode; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start_data(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { + irqmask = MCI_RXFIFOHALFFULLMASK; + + /* + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. + */ + if (host->size < variant->fifohalfsize) + irqmask |= MCI_RXDATAAVLBLMASK; + } else { + /* + * We don't actually need to include "FIFO empty" here + * since its implicit in "FIFO half empty". + */ + irqmask = MCI_TXFIFOHALFEMPTYMASK; + } + + mmci_write_datactrlreg(host, datactrl); + writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); + mmci_set_mask1(host, irqmask); +} + +static void +mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) +{ + void __iomem *base = host->base; + + dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n", + cmd->opcode, cmd->arg, cmd->flags); + + if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) { + writel(0, base + MMCICOMMAND); + mmci_reg_delay(host); + } + + c |= cmd->opcode | MCI_CPSM_ENABLE; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + c |= MCI_CPSM_LONGRSP; + c |= MCI_CPSM_RESPONSE; + } + if (/*interrupt*/0) + c |= MCI_CPSM_INTERRUPT; + + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + c |= host->variant->data_cmd_enable; + + host->cmd = cmd; + + writel(cmd->arg, base + MMCIARGUMENT); + writel(c, base + MMCICOMMAND); +} + +static void +mmci_data_irq(struct mmci_host *host, struct mmc_data *data, + unsigned int status) +{ + /* Make sure we have data to handle */ + if (!data) + return; + + /* First check for errors */ + if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| + MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + u32 remain, success; + + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) { + mmci_dma_data_error(host); + mmci_dma_unmap(host, data); + } + + /* + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. + */ + remain = readl(host->base + MMCIDATACNT); + success = data->blksz * data->blocks - remain; + + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status, success); + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + success -= 1; + data->error = -EILSEQ; + } else if (status & MCI_DATATIMEOUT) { + data->error = -ETIMEDOUT; + } else if (status & MCI_STARTBITERR) { + data->error = -ECOMM; + } else if (status & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; + data->error = -EIO; + } + data->bytes_xfered = round_down(success, data->blksz); + } + + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); + + if (status & MCI_DATAEND || data->error) { + if (dma_inprogress(host)) + mmci_dma_finalize(host, data); + mmci_stop_data(host); + + if (!data->error) + /* The error clause is handled above, success! */ + data->bytes_xfered = data->blksz * data->blocks; + + if (!data->stop || host->mrq->sbc) { + mmci_request_end(host, data->mrq); + } else { + mmci_start_command(host, data->stop, 0); + } + } +} + +static void +mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, + unsigned int status) +{ + void __iomem *base = host->base; + bool sbc, busy_resp; + + if (!cmd) + return; + + sbc = (cmd == host->mrq->sbc); + busy_resp = host->variant->busy_detect && (cmd->flags & MMC_RSP_BUSY); + + if (!((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT| + MCI_CMDSENT|MCI_CMDRESPEND))) + return; + + /* Check if we need to wait for busy completion. */ + if (host->busy_status && (status & MCI_ST_CARDBUSY)) + return; + + /* Enable busy completion if needed and supported. */ + if (!host->busy_status && busy_resp && + !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) && + (readl(base + MMCISTATUS) & MCI_ST_CARDBUSY)) { + writel(readl(base + MMCIMASK0) | MCI_ST_BUSYEND, + base + MMCIMASK0); + host->busy_status = status & (MCI_CMDSENT|MCI_CMDRESPEND); + return; + } + + /* At busy completion, mask the IRQ and complete the request. */ + if (host->busy_status) { + writel(readl(base + MMCIMASK0) & ~MCI_ST_BUSYEND, + base + MMCIMASK0); + host->busy_status = 0; + } + + host->cmd = NULL; + + if (status & MCI_CMDTIMEOUT) { + cmd->error = -ETIMEDOUT; + } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { + cmd->error = -EILSEQ; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); + } + + if ((!sbc && !cmd->data) || cmd->error) { + if (host->data) { + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) { + mmci_dma_data_error(host); + mmci_dma_unmap(host, host->data); + } + mmci_stop_data(host); + } + mmci_request_end(host, host->mrq); + } else if (sbc) { + mmci_start_command(host, host->mrq->cmd, 0); + } else if (!(cmd->data->flags & MMC_DATA_READ)) { + mmci_start_data(host, cmd->data); + } +} + +static int mmci_get_rx_fifocnt(struct mmci_host *host, u32 status, int remain) +{ + return remain - (readl(host->base + MMCIFIFOCNT) << 2); +} + +static int mmci_qcom_get_rx_fifocnt(struct mmci_host *host, u32 status, int r) +{ + /* + * on qcom SDCC4 only 8 words are used in each burst so only 8 addresses + * from the fifo range should be used + */ + if (status & MCI_RXFIFOHALFFULL) + return host->variant->fifohalfsize; + else if (status & MCI_RXDATAAVLBL) + return 4; + + return 0; +} + +static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain) +{ + void __iomem *base = host->base; + char *ptr = buffer; + u32 status = readl(host->base + MMCISTATUS); + int host_remain = host->size; + + do { + int count = host->get_rx_fifocnt(host, status, host_remain); + + if (count > remain) + count = remain; + + if (count <= 0) + break; + + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc). Therefore make sure to always read the last bytes + * while only doing full 32-bit reads towards the FIFO. + */ + if (unlikely(count & 0x3)) { + if (count < 4) { + unsigned char buf[4]; + ioread32_rep(base + MMCIFIFO, buf, 1); + memcpy(ptr, buf, count); + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + count &= ~0x3; + } + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + } + + ptr += count; + remain -= count; + host_remain -= count; + + if (remain == 0) + break; + + status = readl(base + MMCISTATUS); + } while (status & MCI_RXDATAAVLBL); + + return ptr - buffer; +} + +static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) +{ + struct variant_data *variant = host->variant; + void __iomem *base = host->base; + char *ptr = buffer; + + do { + unsigned int count, maxcnt; + + maxcnt = status & MCI_TXFIFOEMPTY ? + variant->fifosize : variant->fifohalfsize; + count = min(remain, maxcnt); + + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc), and the FIFO only accept full 32-bit writes. + * So compensate by adding +3 on the count, a single + * byte become a 32bit write, 7 bytes will be two + * 32bit writes etc. + */ + iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2); + + ptr += count; + remain -= count; + + if (remain == 0) + break; + + status = readl(base + MMCISTATUS); + } while (status & MCI_TXFIFOHALFEMPTY); + + return ptr - buffer; +} + +/* + * PIO data transfer IRQ handler. + */ +static irqreturn_t mmci_pio_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + struct sg_mapping_iter *sg_miter = &host->sg_miter; + struct variant_data *variant = host->variant; + void __iomem *base = host->base; + u32 status; + + status = readl(base + MMCISTATUS); + + dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status); + + do { + unsigned int remain, len; + char *buffer; + + /* + * For write, we only need to test the half-empty flag + * here - if the FIFO is completely empty, then by + * definition it is more than half empty. + * + * For read, check for data available. + */ + if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) + break; + + if (!sg_miter_next(sg_miter)) + break; + + buffer = sg_miter->addr; + remain = sg_miter->length; + + len = 0; + if (status & MCI_RXACTIVE) + len = mmci_pio_read(host, buffer, remain); + if (status & MCI_TXACTIVE) + len = mmci_pio_write(host, buffer, remain, status); + + sg_miter->consumed = len; + + host->size -= len; + remain -= len; + + if (remain) + break; + + status = readl(base + MMCISTATUS); + } while (1); + + sg_miter_stop(sg_miter); + + /* + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. + */ + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) + mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); + + /* + * If we run out of data, disable the data IRQs; this + * prevents a race where the FIFO becomes empty before + * the chip itself has disabled the data path, and + * stops us racing with our data end IRQ. + */ + if (host->size == 0) { + mmci_set_mask1(host, 0); + writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); + } + + return IRQ_HANDLED; +} + +/* + * Handle completion of command and data transfers. + */ +static irqreturn_t mmci_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + u32 status; + int ret = 0; + + spin_lock(&host->lock); + + do { + status = readl(host->base + MMCISTATUS); + + if (host->singleirq) { + if (status & readl(host->base + MMCIMASK1)) + mmci_pio_irq(irq, dev_id); + + status &= ~MCI_IRQ1MASK; + } + + /* + * We intentionally clear the MCI_ST_CARDBUSY IRQ here (if it's + * enabled) since the HW seems to be triggering the IRQ on both + * edges while monitoring DAT0 for busy completion. + */ + status &= readl(host->base + MMCIMASK0); + writel(status, host->base + MMCICLEAR); + + dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); + + if (host->variant->reversed_irq_handling) { + mmci_data_irq(host, host->data, status); + mmci_cmd_irq(host, host->cmd, status); + } else { + mmci_cmd_irq(host, host->cmd, status); + mmci_data_irq(host, host->data, status); + } + + /* Don't poll for busy completion in irq context. */ + if (host->busy_status) + status &= ~MCI_ST_CARDBUSY; + + ret = 1; + } while (status); + + spin_unlock(&host->lock); + + return IRQ_RETVAL(ret); +} + +static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + + WARN_ON(host->mrq != NULL); + + mrq->cmd->error = mmci_validate_data(host, mrq->data); + if (mrq->cmd->error) { + mmc_request_done(mmc, mrq); + return; + } + + pm_runtime_get_sync(mmc_dev(mmc)); + + spin_lock_irqsave(&host->lock, flags); + + host->mrq = mrq; + + if (mrq->data) + mmci_get_next_data(host, mrq->data); + + if (mrq->data && mrq->data->flags & MMC_DATA_READ) + mmci_start_data(host, mrq->data); + + if (mrq->sbc) + mmci_start_command(host, mrq->sbc, 0); + else + mmci_start_command(host, mrq->cmd, 0); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmci_host *host = mmc_priv(mmc); + struct variant_data *variant = host->variant; + u32 pwr = 0; + unsigned long flags; + int ret; + + pm_runtime_get_sync(mmc_dev(mmc)); + + if (host->plat->ios_handler && + host->plat->ios_handler(mmc_dev(mmc), ios)) + dev_err(mmc_dev(mmc), "platform ios_handler failed\n"); + + switch (ios->power_mode) { + case MMC_POWER_OFF: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { + regulator_disable(mmc->supply.vqmmc); + host->vqmmc_enabled = false; + } + + break; + case MMC_POWER_UP: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + /* + * The ST Micro variant doesn't have the PL180s MCI_PWR_UP + * and instead uses MCI_PWR_ON so apply whatever value is + * configured in the variant data. + */ + pwr |= variant->pwrreg_powerup; + + break; + case MMC_POWER_ON: + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), + "failed to enable vqmmc regulator\n"); + else + host->vqmmc_enabled = true; + } + + pwr |= MCI_PWR_ON; + break; + } + + if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) { + /* + * The ST Micro variant has some additional bits + * indicating signal direction for the signals in + * the SD/MMC bus and feedback-clock usage. + */ + pwr |= host->pwr_reg_add; + + if (ios->bus_width == MMC_BUS_WIDTH_4) + pwr &= ~MCI_ST_DATA74DIREN; + else if (ios->bus_width == MMC_BUS_WIDTH_1) + pwr &= (~MCI_ST_DATA74DIREN & + ~MCI_ST_DATA31DIREN & + ~MCI_ST_DATA2DIREN); + } + + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { + if (host->hw_designer != AMBA_VENDOR_ST) + pwr |= MCI_ROD; + else { + /* + * The ST Micro variant use the ROD bit for something + * else and only has OD (Open Drain). + */ + pwr |= MCI_OD; + } + } + + /* + * If clock = 0 and the variant requires the MMCIPOWER to be used for + * gating the clock, the MCI_PWR_ON bit is cleared. + */ + if (!ios->clock && variant->pwrreg_clkgate) + pwr &= ~MCI_PWR_ON; + + if (host->variant->explicit_mclk_control && + ios->clock != host->clock_cache) { + ret = clk_set_rate(host->clk, ios->clock); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "Error setting clock rate (%d)\n", ret); + else + host->mclk = clk_get_rate(host->clk); + } + host->clock_cache = ios->clock; + + spin_lock_irqsave(&host->lock, flags); + + mmci_set_clkreg(host, ios->clock); + mmci_write_pwrreg(host, pwr); + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); +} + +static int mmci_get_cd(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmci_platform_data *plat = host->plat; + unsigned int status = mmc_gpio_get_cd(mmc); + + if (status == -ENOSYS) { + if (!plat->status) + return 1; /* Assume always present */ + + status = plat->status(mmc_dev(host->mmc)); + } + return status; +} + +static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + int ret = 0; + + if (!IS_ERR(mmc->supply.vqmmc)) { + + pm_runtime_get_sync(mmc_dev(mmc)); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 2700000, 3600000); + break; + case MMC_SIGNAL_VOLTAGE_180: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1700000, 1950000); + break; + case MMC_SIGNAL_VOLTAGE_120: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1100000, 1300000); + break; + } + + if (ret) + dev_warn(mmc_dev(mmc), "Voltage switch failed\n"); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + } + + return ret; +} + +static struct mmc_host_ops mmci_ops = { + .request = mmci_request, + .pre_req = mmci_pre_request, + .post_req = mmci_post_request, + .set_ios = mmci_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmci_get_cd, + .start_signal_voltage_switch = mmci_sig_volt_switch, +}; + +static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + int ret = mmc_of_parse(mmc); + + if (ret) + return ret; + + if (of_get_property(np, "st,sig-dir-dat0", NULL)) + host->pwr_reg_add |= MCI_ST_DATA0DIREN; + if (of_get_property(np, "st,sig-dir-dat2", NULL)) + host->pwr_reg_add |= MCI_ST_DATA2DIREN; + if (of_get_property(np, "st,sig-dir-dat31", NULL)) + host->pwr_reg_add |= MCI_ST_DATA31DIREN; + if (of_get_property(np, "st,sig-dir-dat74", NULL)) + host->pwr_reg_add |= MCI_ST_DATA74DIREN; + if (of_get_property(np, "st,sig-dir-cmd", NULL)) + host->pwr_reg_add |= MCI_ST_CMDDIREN; + if (of_get_property(np, "st,sig-pin-fbclk", NULL)) + host->pwr_reg_add |= MCI_ST_FBCLKEN; + + if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_get_property(np, "mmc-cap-sd-highspeed", NULL)) + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + + return 0; +} + +static int mmci_probe(struct amba_device *dev, + const struct amba_id *id) +{ + struct mmci_platform_data *plat = dev->dev.platform_data; + struct device_node *np = dev->dev.of_node; + struct variant_data *variant = id->data; + struct mmci_host *host; + struct mmc_host *mmc; + int ret; + + /* Must have platform data or Device Tree. */ + if (!plat && !np) { + dev_err(&dev->dev, "No plat data or DT found\n"); + return -EINVAL; + } + + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } + + mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); + if (!mmc) + return -ENOMEM; + + ret = mmci_of_parse(np, mmc); + if (ret) + goto host_free; + + host = mmc_priv(mmc); + host->mmc = mmc; + + host->hw_designer = amba_manf(dev); + host->hw_revision = amba_rev(dev); + dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer); + dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision); + + host->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto host_free; + } + + ret = clk_prepare_enable(host->clk); + if (ret) + goto host_free; + + if (variant->qcom_fifo) + host->get_rx_fifocnt = mmci_qcom_get_rx_fifocnt; + else + host->get_rx_fifocnt = mmci_get_rx_fifocnt; + + host->plat = plat; + host->variant = variant; + host->mclk = clk_get_rate(host->clk); + /* + * According to the spec, mclk is max 100 MHz, + * so we try to adjust the clock down to this, + * (if possible). + */ + if (host->mclk > variant->f_max) { + ret = clk_set_rate(host->clk, variant->f_max); + if (ret < 0) + goto clk_disable; + host->mclk = clk_get_rate(host->clk); + dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", + host->mclk); + } + + host->phybase = dev->res.start; + host->base = devm_ioremap_resource(&dev->dev, &dev->res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto clk_disable; + } + + /* + * The ARM and ST versions of the block have slightly different + * clock divider equations which means that the minimum divider + * differs too. + * on Qualcomm like controllers get the nearest minimum clock to 100Khz + */ + if (variant->st_clkdiv) + mmc->f_min = DIV_ROUND_UP(host->mclk, 257); + else if (variant->explicit_mclk_control) + mmc->f_min = clk_round_rate(host->clk, 100000); + else + mmc->f_min = DIV_ROUND_UP(host->mclk, 512); + /* + * If no maximum operating frequency is supplied, fall back to use + * the module parameter, which has a (low) default value in case it + * is not specified. Either value must not exceed the clock rate into + * the block, of course. + */ + if (mmc->f_max) + mmc->f_max = variant->explicit_mclk_control ? + min(variant->f_max, mmc->f_max) : + min(host->mclk, mmc->f_max); + else + mmc->f_max = variant->explicit_mclk_control ? + fmax : min(host->mclk, fmax); + + + dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); + + /* Get regulators and the supported OCR mask */ + ret = mmc_regulator_get_supply(mmc); + if (ret == -EPROBE_DEFER) + goto clk_disable; + + if (!mmc->ocr_avail) + mmc->ocr_avail = plat->ocr_mask; + else if (plat->ocr_mask) + dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); + + /* DT takes precedence over platform data. */ + if (!np) { + if (!plat->cd_invert) + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } + + /* We support these capabilities. */ + mmc->caps |= MMC_CAP_CMD23; + + if (variant->busy_detect) { + mmci_ops.card_busy = mmci_card_busy; + mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE); + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; + mmc->max_busy_timeout = 0; + } + + mmc->ops = &mmci_ops; + + /* We support these PM capabilities. */ + mmc->pm_caps |= MMC_PM_KEEP_POWER; + + /* + * We can do SGIO + */ + mmc->max_segs = NR_SG; + + /* + * Since only a certain number of bits are valid in the data length + * register, we must ensure that we don't exceed 2^num-1 bytes in a + * single request. + */ + mmc->max_req_size = (1 << variant->datalength_bits) - 1; + + /* + * Set the maximum segment size. Since we aren't doing DMA + * (yet) we are only limited by the data length register. + */ + mmc->max_seg_size = mmc->max_req_size; + + /* + * Block size can be up to 2048 bytes, but must be a power of two. + */ + mmc->max_blk_size = 1 << 11; + + /* + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. + */ + mmc->max_blk_count = mmc->max_req_size >> 11; + + spin_lock_init(&host->lock); + + writel(0, host->base + MMCIMASK0); + writel(0, host->base + MMCIMASK1); + writel(0xfff, host->base + MMCICLEAR); + + /* + * If: + * - not using DT but using a descriptor table, or + * - using a table of descriptors ALONGSIDE DT, or + * look up these descriptors named "cd" and "wp" right here, fail + * silently of these do not exist and proceed to try platform data + */ + if (!np) { + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + if (ret < 0) { + if (ret == -EPROBE_DEFER) + goto clk_disable; + else if (gpio_is_valid(plat->gpio_cd)) { + ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0); + if (ret) + goto clk_disable; + } + } + + ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + if (ret < 0) { + if (ret == -EPROBE_DEFER) + goto clk_disable; + else if (gpio_is_valid(plat->gpio_wp)) { + ret = mmc_gpio_request_ro(mmc, plat->gpio_wp); + if (ret) + goto clk_disable; + } + } + } + + ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED, + DRIVER_NAME " (cmd)", host); + if (ret) + goto clk_disable; + + if (!dev->irq[1]) + host->singleirq = true; + else { + ret = devm_request_irq(&dev->dev, dev->irq[1], mmci_pio_irq, + IRQF_SHARED, DRIVER_NAME " (pio)", host); + if (ret) + goto clk_disable; + } + + writel(MCI_IRQENABLE, host->base + MMCIMASK0); + + amba_set_drvdata(dev, mmc); + + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); + + mmci_dma_setup(host); + + pm_runtime_set_autosuspend_delay(&dev->dev, 50); + pm_runtime_use_autosuspend(&dev->dev); + + mmc_add_host(mmc); + + pm_runtime_put(&dev->dev); + return 0; + + clk_disable: + clk_disable_unprepare(host->clk); + host_free: + mmc_free_host(mmc); + return ret; +} + +static int mmci_remove(struct amba_device *dev) +{ + struct mmc_host *mmc = amba_get_drvdata(dev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + + /* + * Undo pm_runtime_put() in probe. We use the _sync + * version here so that we can access the primecell. + */ + pm_runtime_get_sync(&dev->dev); + + mmc_remove_host(mmc); + + writel(0, host->base + MMCIMASK0); + writel(0, host->base + MMCIMASK1); + + writel(0, host->base + MMCICOMMAND); + writel(0, host->base + MMCIDATACTRL); + + mmci_dma_release(host); + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); + } + + return 0; +} + +#ifdef CONFIG_PM +static void mmci_save(struct mmci_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + writel(0, host->base + MMCIMASK0); + if (host->variant->pwrreg_nopower) { + writel(0, host->base + MMCIDATACTRL); + writel(0, host->base + MMCIPOWER); + writel(0, host->base + MMCICLOCK); + } + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static void mmci_restore(struct mmci_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (host->variant->pwrreg_nopower) { + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->datactrl_reg, host->base + MMCIDATACTRL); + writel(host->pwr_reg, host->base + MMCIPOWER); + } + writel(MCI_IRQENABLE, host->base + MMCIMASK0); + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static int mmci_runtime_suspend(struct device *dev) +{ + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + pinctrl_pm_select_sleep_state(dev); + mmci_save(host); + clk_disable_unprepare(host->clk); + } + + return 0; +} + +static int mmci_runtime_resume(struct device *dev) +{ + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + clk_prepare_enable(host->clk); + mmci_restore(host); + pinctrl_pm_select_default_state(dev); + } + + return 0; +} +#endif + +static const struct dev_pm_ops mmci_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL) +}; + +static struct amba_id mmci_ids[] = { + { + .id = 0x00041180, + .mask = 0xff0fffff, + .data = &variant_arm, + }, + { + .id = 0x01041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo, + }, + { + .id = 0x02041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo_hwfc, + }, + { + .id = 0x00041181, + .mask = 0x000fffff, + .data = &variant_arm, + }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + .data = &variant_u300, + }, + { + .id = 0x10180180, + .mask = 0xf0ffffff, + .data = &variant_nomadik, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + .data = &variant_u300, + }, + { + .id = 0x00480180, + .mask = 0xf0ffffff, + .data = &variant_ux500, + }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, + /* Qualcomm variants */ + { + .id = 0x00051180, + .mask = 0x000fffff, + .data = &variant_qcom, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, mmci_ids); + +static struct amba_driver mmci_driver = { + .drv = { + .name = DRIVER_NAME, + .pm = &mmci_dev_pm_ops, + }, + .probe = mmci_probe, + .remove = mmci_remove, + .id_table = mmci_ids, +}; + +module_amba_driver(mmci_driver); + +module_param(fmax, uint, 0444); + +MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver"); +MODULE_LICENSE("GPL"); -- cgit 1.2.3-korg