From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/media/rc/img-ir/Kconfig | 77 ++ kernel/drivers/media/rc/img-ir/Makefile | 13 + kernel/drivers/media/rc/img-ir/img-ir-core.c | 201 +++++ kernel/drivers/media/rc/img-ir/img-ir-hw.c | 1149 +++++++++++++++++++++++++ kernel/drivers/media/rc/img-ir/img-ir-hw.h | 301 +++++++ kernel/drivers/media/rc/img-ir/img-ir-jvc.c | 88 ++ kernel/drivers/media/rc/img-ir/img-ir-nec.c | 158 ++++ kernel/drivers/media/rc/img-ir/img-ir-raw.c | 156 ++++ kernel/drivers/media/rc/img-ir/img-ir-raw.h | 65 ++ kernel/drivers/media/rc/img-ir/img-ir-rc5.c | 88 ++ kernel/drivers/media/rc/img-ir/img-ir-rc6.c | 117 +++ kernel/drivers/media/rc/img-ir/img-ir-sanyo.c | 129 +++ kernel/drivers/media/rc/img-ir/img-ir-sharp.c | 106 +++ kernel/drivers/media/rc/img-ir/img-ir-sony.c | 154 ++++ kernel/drivers/media/rc/img-ir/img-ir.h | 173 ++++ 15 files changed, 2975 insertions(+) create mode 100644 kernel/drivers/media/rc/img-ir/Kconfig create mode 100644 kernel/drivers/media/rc/img-ir/Makefile create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-core.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-hw.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-hw.h create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-jvc.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-nec.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-raw.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-raw.h create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-rc5.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-rc6.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-sanyo.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-sharp.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir-sony.c create mode 100644 kernel/drivers/media/rc/img-ir/img-ir.h (limited to 'kernel/drivers/media/rc/img-ir') diff --git a/kernel/drivers/media/rc/img-ir/Kconfig b/kernel/drivers/media/rc/img-ir/Kconfig new file mode 100644 index 000000000..a896d3c83 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/Kconfig @@ -0,0 +1,77 @@ +config IR_IMG + tristate "ImgTec IR Decoder" + depends on RC_CORE + depends on METAG || MIPS || COMPILE_TEST + select IR_IMG_HW if !IR_IMG_RAW + help + Say Y or M here if you want to use the ImgTec infrared decoder + functionality found in SoCs such as TZ1090. + +config IR_IMG_RAW + bool "Raw decoder" + depends on IR_IMG + help + Say Y here to enable the raw mode driver which passes raw IR signal + changes to the IR raw decoders for software decoding. This is much + less reliable (due to lack of timestamps) and consumes more + processing power than using hardware decode, but can be useful for + testing, debug, and to make more protocols available. + +config IR_IMG_HW + bool "Hardware decoder" + depends on IR_IMG + help + Say Y here to enable the hardware decode driver which decodes the IR + signals in hardware. This is more reliable, consumes less processing + power since only a single interrupt is received for each scancode, + and allows an IR scancode to be used as a wake event. + +config IR_IMG_NEC + bool "NEC protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the NEC, extended NEC, and 32-bit + NEC protocols in the ImgTec infrared decoder block. + +config IR_IMG_JVC + bool "JVC protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the JVC protocol in the ImgTec + infrared decoder block. + +config IR_IMG_SONY + bool "Sony protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the Sony protocol in the ImgTec + infrared decoder block. + +config IR_IMG_SHARP + bool "Sharp protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the Sharp protocol in the ImgTec + infrared decoder block. + +config IR_IMG_SANYO + bool "Sanyo protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the Sanyo protocol (used by Sanyo, + Aiwa, Chinon remotes) in the ImgTec infrared decoder block. + +config IR_IMG_RC5 + bool "Philips RC5 protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the RC5 protocol in the ImgTec + infrared decoder block. + +config IR_IMG_RC6 + bool "Philips RC6 protocol support" + depends on IR_IMG_HW + help + Say Y here to enable support for the RC6 protocol in the ImgTec + infrared decoder block. + Note: This version only supports mode 0. diff --git a/kernel/drivers/media/rc/img-ir/Makefile b/kernel/drivers/media/rc/img-ir/Makefile new file mode 100644 index 000000000..8e6d458e6 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/Makefile @@ -0,0 +1,13 @@ +img-ir-y := img-ir-core.o +img-ir-$(CONFIG_IR_IMG_RAW) += img-ir-raw.o +img-ir-$(CONFIG_IR_IMG_HW) += img-ir-hw.o +img-ir-$(CONFIG_IR_IMG_NEC) += img-ir-nec.o +img-ir-$(CONFIG_IR_IMG_JVC) += img-ir-jvc.o +img-ir-$(CONFIG_IR_IMG_SONY) += img-ir-sony.o +img-ir-$(CONFIG_IR_IMG_SHARP) += img-ir-sharp.o +img-ir-$(CONFIG_IR_IMG_SANYO) += img-ir-sanyo.o +img-ir-$(CONFIG_IR_IMG_RC5) += img-ir-rc5.o +img-ir-$(CONFIG_IR_IMG_RC6) += img-ir-rc6.o +img-ir-objs := $(img-ir-y) + +obj-$(CONFIG_IR_IMG) += img-ir.o diff --git a/kernel/drivers/media/rc/img-ir/img-ir-core.c b/kernel/drivers/media/rc/img-ir/img-ir-core.c new file mode 100644 index 000000000..03fe08027 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-core.c @@ -0,0 +1,201 @@ +/* + * ImgTec IR Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This contains core img-ir code for setting up the driver. The two interfaces + * (raw and hardware decode) are handled separately. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "img-ir.h" + +static irqreturn_t img_ir_isr(int irq, void *dev_id) +{ + struct img_ir_priv *priv = dev_id; + u32 irq_status; + + spin_lock(&priv->lock); + /* we have to clear irqs before reading */ + irq_status = img_ir_read(priv, IMG_IR_IRQ_STATUS); + img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_status); + + /* don't handle valid data irqs if we're only interested in matches */ + irq_status &= img_ir_read(priv, IMG_IR_IRQ_ENABLE); + + /* hand off edge interrupts to raw decode handler */ + if (irq_status & IMG_IR_IRQ_EDGE && img_ir_raw_enabled(&priv->raw)) + img_ir_isr_raw(priv, irq_status); + + /* hand off hardware match interrupts to hardware decode handler */ + if (irq_status & (IMG_IR_IRQ_DATA_MATCH | + IMG_IR_IRQ_DATA_VALID | + IMG_IR_IRQ_DATA2_VALID) && + img_ir_hw_enabled(&priv->hw)) + img_ir_isr_hw(priv, irq_status); + + spin_unlock(&priv->lock); + return IRQ_HANDLED; +} + +static void img_ir_setup(struct img_ir_priv *priv) +{ + /* start off with interrupts disabled */ + img_ir_write(priv, IMG_IR_IRQ_ENABLE, 0); + + img_ir_setup_raw(priv); + img_ir_setup_hw(priv); + + if (!IS_ERR(priv->clk)) + clk_prepare_enable(priv->clk); +} + +static void img_ir_ident(struct img_ir_priv *priv) +{ + u32 core_rev = img_ir_read(priv, IMG_IR_CORE_REV); + + dev_info(priv->dev, + "IMG IR Decoder (%d.%d.%d.%d) probed successfully\n", + (core_rev & IMG_IR_DESIGNER) >> IMG_IR_DESIGNER_SHIFT, + (core_rev & IMG_IR_MAJOR_REV) >> IMG_IR_MAJOR_REV_SHIFT, + (core_rev & IMG_IR_MINOR_REV) >> IMG_IR_MINOR_REV_SHIFT, + (core_rev & IMG_IR_MAINT_REV) >> IMG_IR_MAINT_REV_SHIFT); + dev_info(priv->dev, "Modes:%s%s\n", + img_ir_hw_enabled(&priv->hw) ? " hardware" : "", + img_ir_raw_enabled(&priv->raw) ? " raw" : ""); +} + +static int img_ir_probe(struct platform_device *pdev) +{ + struct img_ir_priv *priv; + struct resource *res_regs; + int irq, error, error2; + + /* Get resources from platform device */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "cannot find IRQ resource\n"); + return irq; + } + + /* Private driver data */ + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "cannot allocate device data\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, priv); + priv->dev = &pdev->dev; + spin_lock_init(&priv->lock); + + /* Ioremap the registers */ + res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->reg_base = devm_ioremap_resource(&pdev->dev, res_regs); + if (IS_ERR(priv->reg_base)) + return PTR_ERR(priv->reg_base); + + /* Get core clock */ + priv->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(priv->clk)) + dev_warn(&pdev->dev, "cannot get core clock resource\n"); + + /* Get sys clock */ + priv->sys_clk = devm_clk_get(&pdev->dev, "sys"); + if (IS_ERR(priv->sys_clk)) + dev_warn(&pdev->dev, "cannot get sys clock resource\n"); + /* + * Enabling the system clock before the register interface is + * accessed. ISR shouldn't get called with Sys Clock disabled, + * hence exiting probe with an error. + */ + if (!IS_ERR(priv->sys_clk)) { + error = clk_prepare_enable(priv->sys_clk); + if (error) { + dev_err(&pdev->dev, "cannot enable sys clock\n"); + return error; + } + } + + /* Set up raw & hw decoder */ + error = img_ir_probe_raw(priv); + error2 = img_ir_probe_hw(priv); + if (error && error2) { + if (error == -ENODEV) + error = error2; + goto err_probe; + } + + /* Get the IRQ */ + priv->irq = irq; + error = request_irq(priv->irq, img_ir_isr, 0, "img-ir", priv); + if (error) { + dev_err(&pdev->dev, "cannot register IRQ %u\n", + priv->irq); + error = -EIO; + goto err_irq; + } + + img_ir_ident(priv); + img_ir_setup(priv); + + return 0; + +err_irq: + img_ir_remove_hw(priv); + img_ir_remove_raw(priv); +err_probe: + if (!IS_ERR(priv->sys_clk)) + clk_disable_unprepare(priv->sys_clk); + return error; +} + +static int img_ir_remove(struct platform_device *pdev) +{ + struct img_ir_priv *priv = platform_get_drvdata(pdev); + + free_irq(priv->irq, priv); + img_ir_remove_hw(priv); + img_ir_remove_raw(priv); + + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); + if (!IS_ERR(priv->sys_clk)) + clk_disable_unprepare(priv->sys_clk); + return 0; +} + +static SIMPLE_DEV_PM_OPS(img_ir_pmops, img_ir_suspend, img_ir_resume); + +static const struct of_device_id img_ir_match[] = { + { .compatible = "img,ir-rev1" }, + {} +}; +MODULE_DEVICE_TABLE(of, img_ir_match); + +static struct platform_driver img_ir_driver = { + .driver = { + .name = "img-ir", + .of_match_table = img_ir_match, + .pm = &img_ir_pmops, + }, + .probe = img_ir_probe, + .remove = img_ir_remove, +}; + +module_platform_driver(img_ir_driver); + +MODULE_AUTHOR("Imagination Technologies Ltd."); +MODULE_DESCRIPTION("ImgTec IR"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/media/rc/img-ir/img-ir-hw.c b/kernel/drivers/media/rc/img-ir/img-ir-hw.c new file mode 100644 index 000000000..7bb71bc9f --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-hw.c @@ -0,0 +1,1149 @@ +/* + * ImgTec IR Hardware Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This ties into the input subsystem using the RC-core. Protocol support is + * provided in separate modules which provide the parameters and scancode + * translation functions to set up the hardware decoder and interpret the + * resulting input. + */ + +#include +#include +#include +#include +#include +#include +#include "img-ir.h" + +/* Decoders lock (only modified to preprocess them) */ +static DEFINE_SPINLOCK(img_ir_decoders_lock); + +static bool img_ir_decoders_preprocessed; +static struct img_ir_decoder *img_ir_decoders[] = { +#ifdef CONFIG_IR_IMG_NEC + &img_ir_nec, +#endif +#ifdef CONFIG_IR_IMG_JVC + &img_ir_jvc, +#endif +#ifdef CONFIG_IR_IMG_SONY + &img_ir_sony, +#endif +#ifdef CONFIG_IR_IMG_SHARP + &img_ir_sharp, +#endif +#ifdef CONFIG_IR_IMG_SANYO + &img_ir_sanyo, +#endif +#ifdef CONFIG_IR_IMG_RC5 + &img_ir_rc5, +#endif +#ifdef CONFIG_IR_IMG_RC6 + &img_ir_rc6, +#endif + NULL +}; + +#define IMG_IR_F_FILTER BIT(RC_FILTER_NORMAL) /* enable filtering */ +#define IMG_IR_F_WAKE BIT(RC_FILTER_WAKEUP) /* enable waking */ + +/* code type quirks */ + +#define IMG_IR_QUIRK_CODE_BROKEN 0x1 /* Decode is broken */ +#define IMG_IR_QUIRK_CODE_LEN_INCR 0x2 /* Bit length needs increment */ +/* + * The decoder generates rapid interrupts without actually having + * received any new data after an incomplete IR code is decoded. + */ +#define IMG_IR_QUIRK_CODE_IRQ 0x4 + +/* functions for preprocessing timings, ensuring max is set */ + +static void img_ir_timing_preprocess(struct img_ir_timing_range *range, + unsigned int unit) +{ + if (range->max < range->min) + range->max = range->min; + if (unit) { + /* multiply by unit and convert to microseconds */ + range->min = (range->min*unit)/1000; + range->max = (range->max*unit + 999)/1000; /* round up */ + } +} + +static void img_ir_symbol_timing_preprocess(struct img_ir_symbol_timing *timing, + unsigned int unit) +{ + img_ir_timing_preprocess(&timing->pulse, unit); + img_ir_timing_preprocess(&timing->space, unit); +} + +static void img_ir_timings_preprocess(struct img_ir_timings *timings, + unsigned int unit) +{ + img_ir_symbol_timing_preprocess(&timings->ldr, unit); + img_ir_symbol_timing_preprocess(&timings->s00, unit); + img_ir_symbol_timing_preprocess(&timings->s01, unit); + img_ir_symbol_timing_preprocess(&timings->s10, unit); + img_ir_symbol_timing_preprocess(&timings->s11, unit); + /* default s10 and s11 to s00 and s01 if no leader */ + if (unit) + /* multiply by unit and convert to microseconds (round up) */ + timings->ft.ft_min = (timings->ft.ft_min*unit + 999)/1000; +} + +/* functions for filling empty fields with defaults */ + +static void img_ir_timing_defaults(struct img_ir_timing_range *range, + struct img_ir_timing_range *defaults) +{ + if (!range->min) + range->min = defaults->min; + if (!range->max) + range->max = defaults->max; +} + +static void img_ir_symbol_timing_defaults(struct img_ir_symbol_timing *timing, + struct img_ir_symbol_timing *defaults) +{ + img_ir_timing_defaults(&timing->pulse, &defaults->pulse); + img_ir_timing_defaults(&timing->space, &defaults->space); +} + +static void img_ir_timings_defaults(struct img_ir_timings *timings, + struct img_ir_timings *defaults) +{ + img_ir_symbol_timing_defaults(&timings->ldr, &defaults->ldr); + img_ir_symbol_timing_defaults(&timings->s00, &defaults->s00); + img_ir_symbol_timing_defaults(&timings->s01, &defaults->s01); + img_ir_symbol_timing_defaults(&timings->s10, &defaults->s10); + img_ir_symbol_timing_defaults(&timings->s11, &defaults->s11); + if (!timings->ft.ft_min) + timings->ft.ft_min = defaults->ft.ft_min; +} + +/* functions for converting timings to register values */ + +/** + * img_ir_control() - Convert control struct to control register value. + * @control: Control data + * + * Returns: The control register value equivalent of @control. + */ +static u32 img_ir_control(const struct img_ir_control *control) +{ + u32 ctrl = control->code_type << IMG_IR_CODETYPE_SHIFT; + if (control->decoden) + ctrl |= IMG_IR_DECODEN; + if (control->hdrtog) + ctrl |= IMG_IR_HDRTOG; + if (control->ldrdec) + ctrl |= IMG_IR_LDRDEC; + if (control->decodinpol) + ctrl |= IMG_IR_DECODINPOL; + if (control->bitorien) + ctrl |= IMG_IR_BITORIEN; + if (control->d1validsel) + ctrl |= IMG_IR_D1VALIDSEL; + if (control->bitinv) + ctrl |= IMG_IR_BITINV; + if (control->decodend2) + ctrl |= IMG_IR_DECODEND2; + if (control->bitoriend2) + ctrl |= IMG_IR_BITORIEND2; + if (control->bitinvd2) + ctrl |= IMG_IR_BITINVD2; + return ctrl; +} + +/** + * img_ir_timing_range_convert() - Convert microsecond range. + * @out: Output timing range in clock cycles with a shift. + * @in: Input timing range in microseconds. + * @tolerance: Tolerance as a fraction of 128 (roughly percent). + * @clock_hz: IR clock rate in Hz. + * @shift: Shift of output units. + * + * Converts min and max from microseconds to IR clock cycles, applies a + * tolerance, and shifts for the register, rounding in the right direction. + * Note that in and out can safely be the same object. + */ +static void img_ir_timing_range_convert(struct img_ir_timing_range *out, + const struct img_ir_timing_range *in, + unsigned int tolerance, + unsigned long clock_hz, + unsigned int shift) +{ + unsigned int min = in->min; + unsigned int max = in->max; + /* add a tolerance */ + min = min - (min*tolerance >> 7); + max = max + (max*tolerance >> 7); + /* convert from microseconds into clock cycles */ + min = min*clock_hz / 1000000; + max = (max*clock_hz + 999999) / 1000000; /* round up */ + /* apply shift and copy to output */ + out->min = min >> shift; + out->max = (max + ((1 << shift) - 1)) >> shift; /* round up */ +} + +/** + * img_ir_symbol_timing() - Convert symbol timing struct to register value. + * @timing: Symbol timing data + * @tolerance: Timing tolerance where 0-128 represents 0-100% + * @clock_hz: Frequency of source clock in Hz + * @pd_shift: Shift to apply to symbol period + * @w_shift: Shift to apply to symbol width + * + * Returns: Symbol timing register value based on arguments. + */ +static u32 img_ir_symbol_timing(const struct img_ir_symbol_timing *timing, + unsigned int tolerance, + unsigned long clock_hz, + unsigned int pd_shift, + unsigned int w_shift) +{ + struct img_ir_timing_range hw_pulse, hw_period; + /* we calculate period in hw_period, then convert in place */ + hw_period.min = timing->pulse.min + timing->space.min; + hw_period.max = timing->pulse.max + timing->space.max; + img_ir_timing_range_convert(&hw_period, &hw_period, + tolerance, clock_hz, pd_shift); + img_ir_timing_range_convert(&hw_pulse, &timing->pulse, + tolerance, clock_hz, w_shift); + /* construct register value */ + return (hw_period.max << IMG_IR_PD_MAX_SHIFT) | + (hw_period.min << IMG_IR_PD_MIN_SHIFT) | + (hw_pulse.max << IMG_IR_W_MAX_SHIFT) | + (hw_pulse.min << IMG_IR_W_MIN_SHIFT); +} + +/** + * img_ir_free_timing() - Convert free time timing struct to register value. + * @timing: Free symbol timing data + * @clock_hz: Source clock frequency in Hz + * + * Returns: Free symbol timing register value. + */ +static u32 img_ir_free_timing(const struct img_ir_free_timing *timing, + unsigned long clock_hz) +{ + unsigned int minlen, maxlen, ft_min; + /* minlen is only 5 bits, and round minlen to multiple of 2 */ + if (timing->minlen < 30) + minlen = timing->minlen & -2; + else + minlen = 30; + /* maxlen has maximum value of 48, and round maxlen to multiple of 2 */ + if (timing->maxlen < 48) + maxlen = (timing->maxlen + 1) & -2; + else + maxlen = 48; + /* convert and shift ft_min, rounding upwards */ + ft_min = (timing->ft_min*clock_hz + 999999) / 1000000; + ft_min = (ft_min + 7) >> 3; + /* construct register value */ + return (maxlen << IMG_IR_MAXLEN_SHIFT) | + (minlen << IMG_IR_MINLEN_SHIFT) | + (ft_min << IMG_IR_FT_MIN_SHIFT); +} + +/** + * img_ir_free_timing_dynamic() - Update free time register value. + * @st_ft: Static free time register value from img_ir_free_timing. + * @filter: Current filter which may additionally restrict min/max len. + * + * Returns: Updated free time register value based on the current filter. + */ +static u32 img_ir_free_timing_dynamic(u32 st_ft, struct img_ir_filter *filter) +{ + unsigned int minlen, maxlen, newminlen, newmaxlen; + + /* round minlen, maxlen to multiple of 2 */ + newminlen = filter->minlen & -2; + newmaxlen = (filter->maxlen + 1) & -2; + /* extract min/max len from register */ + minlen = (st_ft & IMG_IR_MINLEN) >> IMG_IR_MINLEN_SHIFT; + maxlen = (st_ft & IMG_IR_MAXLEN) >> IMG_IR_MAXLEN_SHIFT; + /* if the new values are more restrictive, update the register value */ + if (newminlen > minlen) { + st_ft &= ~IMG_IR_MINLEN; + st_ft |= newminlen << IMG_IR_MINLEN_SHIFT; + } + if (newmaxlen < maxlen) { + st_ft &= ~IMG_IR_MAXLEN; + st_ft |= newmaxlen << IMG_IR_MAXLEN_SHIFT; + } + return st_ft; +} + +/** + * img_ir_timings_convert() - Convert timings to register values + * @regs: Output timing register values + * @timings: Input timing data + * @tolerance: Timing tolerance where 0-128 represents 0-100% + * @clock_hz: Source clock frequency in Hz + */ +static void img_ir_timings_convert(struct img_ir_timing_regvals *regs, + const struct img_ir_timings *timings, + unsigned int tolerance, + unsigned int clock_hz) +{ + /* leader symbol timings are divided by 16 */ + regs->ldr = img_ir_symbol_timing(&timings->ldr, tolerance, clock_hz, + 4, 4); + /* other symbol timings, pd fields only are divided by 2 */ + regs->s00 = img_ir_symbol_timing(&timings->s00, tolerance, clock_hz, + 1, 0); + regs->s01 = img_ir_symbol_timing(&timings->s01, tolerance, clock_hz, + 1, 0); + regs->s10 = img_ir_symbol_timing(&timings->s10, tolerance, clock_hz, + 1, 0); + regs->s11 = img_ir_symbol_timing(&timings->s11, tolerance, clock_hz, + 1, 0); + regs->ft = img_ir_free_timing(&timings->ft, clock_hz); +} + +/** + * img_ir_decoder_preprocess() - Preprocess timings in decoder. + * @decoder: Decoder to be preprocessed. + * + * Ensures that the symbol timing ranges are valid with respect to ordering, and + * does some fixed conversion on them. + */ +static void img_ir_decoder_preprocess(struct img_ir_decoder *decoder) +{ + /* default tolerance */ + if (!decoder->tolerance) + decoder->tolerance = 10; /* percent */ + /* and convert tolerance to fraction out of 128 */ + decoder->tolerance = decoder->tolerance * 128 / 100; + + /* fill in implicit fields */ + img_ir_timings_preprocess(&decoder->timings, decoder->unit); + + /* do the same for repeat timings if applicable */ + if (decoder->repeat) { + img_ir_timings_preprocess(&decoder->rtimings, decoder->unit); + img_ir_timings_defaults(&decoder->rtimings, &decoder->timings); + } +} + +/** + * img_ir_decoder_convert() - Generate internal timings in decoder. + * @decoder: Decoder to be converted to internal timings. + * @timings: Timing register values. + * @clock_hz: IR clock rate in Hz. + * + * Fills out the repeat timings and timing register values for a specific clock + * rate. + */ +static void img_ir_decoder_convert(const struct img_ir_decoder *decoder, + struct img_ir_reg_timings *reg_timings, + unsigned int clock_hz) +{ + /* calculate control value */ + reg_timings->ctrl = img_ir_control(&decoder->control); + + /* fill in implicit fields and calculate register values */ + img_ir_timings_convert(®_timings->timings, &decoder->timings, + decoder->tolerance, clock_hz); + + /* do the same for repeat timings if applicable */ + if (decoder->repeat) + img_ir_timings_convert(®_timings->rtimings, + &decoder->rtimings, decoder->tolerance, + clock_hz); +} + +/** + * img_ir_write_timings() - Write timings to the hardware now + * @priv: IR private data + * @regs: Timing register values to write + * @type: RC filter type (RC_FILTER_*) + * + * Write timing register values @regs to the hardware, taking into account the + * current filter which may impose restrictions on the length of the expected + * data. + */ +static void img_ir_write_timings(struct img_ir_priv *priv, + struct img_ir_timing_regvals *regs, + enum rc_filter_type type) +{ + struct img_ir_priv_hw *hw = &priv->hw; + + /* filter may be more restrictive to minlen, maxlen */ + u32 ft = regs->ft; + if (hw->flags & BIT(type)) + ft = img_ir_free_timing_dynamic(regs->ft, &hw->filters[type]); + /* write to registers */ + img_ir_write(priv, IMG_IR_LEAD_SYMB_TIMING, regs->ldr); + img_ir_write(priv, IMG_IR_S00_SYMB_TIMING, regs->s00); + img_ir_write(priv, IMG_IR_S01_SYMB_TIMING, regs->s01); + img_ir_write(priv, IMG_IR_S10_SYMB_TIMING, regs->s10); + img_ir_write(priv, IMG_IR_S11_SYMB_TIMING, regs->s11); + img_ir_write(priv, IMG_IR_FREE_SYMB_TIMING, ft); + dev_dbg(priv->dev, "timings: ldr=%#x, s=[%#x, %#x, %#x, %#x], ft=%#x\n", + regs->ldr, regs->s00, regs->s01, regs->s10, regs->s11, ft); +} + +static void img_ir_write_filter(struct img_ir_priv *priv, + struct img_ir_filter *filter) +{ + if (filter) { + dev_dbg(priv->dev, "IR filter=%016llx & %016llx\n", + (unsigned long long)filter->data, + (unsigned long long)filter->mask); + img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_LW, (u32)filter->data); + img_ir_write(priv, IMG_IR_IRQ_MSG_DATA_UP, (u32)(filter->data + >> 32)); + img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, (u32)filter->mask); + img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, (u32)(filter->mask + >> 32)); + } else { + dev_dbg(priv->dev, "IR clearing filter\n"); + img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_LW, 0); + img_ir_write(priv, IMG_IR_IRQ_MSG_MASK_UP, 0); + } +} + +/* caller must have lock */ +static void _img_ir_set_filter(struct img_ir_priv *priv, + struct img_ir_filter *filter) +{ + struct img_ir_priv_hw *hw = &priv->hw; + u32 irq_en, irq_on; + + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + if (filter) { + /* Only use the match interrupt */ + hw->filters[RC_FILTER_NORMAL] = *filter; + hw->flags |= IMG_IR_F_FILTER; + irq_on = IMG_IR_IRQ_DATA_MATCH; + irq_en &= ~(IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID); + } else { + /* Only use the valid interrupt */ + hw->flags &= ~IMG_IR_F_FILTER; + irq_en &= ~IMG_IR_IRQ_DATA_MATCH; + irq_on = IMG_IR_IRQ_DATA_VALID | IMG_IR_IRQ_DATA2_VALID; + } + irq_en |= irq_on; + + img_ir_write_filter(priv, filter); + /* clear any interrupts we're enabling so we don't handle old ones */ + img_ir_write(priv, IMG_IR_IRQ_CLEAR, irq_on); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); +} + +/* caller must have lock */ +static void _img_ir_set_wake_filter(struct img_ir_priv *priv, + struct img_ir_filter *filter) +{ + struct img_ir_priv_hw *hw = &priv->hw; + if (filter) { + /* Enable wake, and copy filter for later */ + hw->filters[RC_FILTER_WAKEUP] = *filter; + hw->flags |= IMG_IR_F_WAKE; + } else { + /* Disable wake */ + hw->flags &= ~IMG_IR_F_WAKE; + } +} + +/* Callback for setting scancode filter */ +static int img_ir_set_filter(struct rc_dev *dev, enum rc_filter_type type, + struct rc_scancode_filter *sc_filter) +{ + struct img_ir_priv *priv = dev->priv; + struct img_ir_priv_hw *hw = &priv->hw; + struct img_ir_filter filter, *filter_ptr = &filter; + int ret = 0; + + dev_dbg(priv->dev, "IR scancode %sfilter=%08x & %08x\n", + type == RC_FILTER_WAKEUP ? "wake " : "", + sc_filter->data, + sc_filter->mask); + + spin_lock_irq(&priv->lock); + + /* filtering can always be disabled */ + if (!sc_filter->mask) { + filter_ptr = NULL; + goto set_unlock; + } + + /* current decoder must support scancode filtering */ + if (!hw->decoder || !hw->decoder->filter) { + ret = -EINVAL; + goto unlock; + } + + /* convert scancode filter to raw filter */ + filter.minlen = 0; + filter.maxlen = ~0; + ret = hw->decoder->filter(sc_filter, &filter, hw->enabled_protocols); + if (ret) + goto unlock; + dev_dbg(priv->dev, "IR raw %sfilter=%016llx & %016llx\n", + type == RC_FILTER_WAKEUP ? "wake " : "", + (unsigned long long)filter.data, + (unsigned long long)filter.mask); + +set_unlock: + /* apply raw filters */ + switch (type) { + case RC_FILTER_NORMAL: + _img_ir_set_filter(priv, filter_ptr); + break; + case RC_FILTER_WAKEUP: + _img_ir_set_wake_filter(priv, filter_ptr); + break; + default: + ret = -EINVAL; + } + +unlock: + spin_unlock_irq(&priv->lock); + return ret; +} + +static int img_ir_set_normal_filter(struct rc_dev *dev, + struct rc_scancode_filter *sc_filter) +{ + return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter); +} + +static int img_ir_set_wakeup_filter(struct rc_dev *dev, + struct rc_scancode_filter *sc_filter) +{ + return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter); +} + +/** + * img_ir_set_decoder() - Set the current decoder. + * @priv: IR private data. + * @decoder: Decoder to use with immediate effect. + * @proto: Protocol bitmap (or 0 to use decoder->type). + */ +static void img_ir_set_decoder(struct img_ir_priv *priv, + const struct img_ir_decoder *decoder, + u64 proto) +{ + struct img_ir_priv_hw *hw = &priv->hw; + struct rc_dev *rdev = hw->rdev; + u32 ir_status, irq_en; + spin_lock_irq(&priv->lock); + + /* + * First record that the protocol is being stopped so that the end timer + * isn't restarted while we're trying to stop it. + */ + hw->stopping = true; + + /* + * Release the lock to stop the end timer, since the end timer handler + * acquires the lock and we don't want to deadlock waiting for it. + */ + spin_unlock_irq(&priv->lock); + del_timer_sync(&hw->end_timer); + del_timer_sync(&hw->suspend_timer); + spin_lock_irq(&priv->lock); + + hw->stopping = false; + + /* switch off and disable interrupts */ + img_ir_write(priv, IMG_IR_CONTROL, 0); + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en & IMG_IR_IRQ_EDGE); + img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_ALL & ~IMG_IR_IRQ_EDGE); + + /* ack any data already detected */ + ir_status = img_ir_read(priv, IMG_IR_STATUS); + if (ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2)) { + ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); + img_ir_write(priv, IMG_IR_STATUS, ir_status); + } + + /* always read data to clear buffer if IR wakes the device */ + img_ir_read(priv, IMG_IR_DATA_LW); + img_ir_read(priv, IMG_IR_DATA_UP); + + /* switch back to normal mode */ + hw->mode = IMG_IR_M_NORMAL; + + /* clear the wakeup scancode filter */ + rdev->scancode_wakeup_filter.data = 0; + rdev->scancode_wakeup_filter.mask = 0; + + /* clear raw filters */ + _img_ir_set_filter(priv, NULL); + _img_ir_set_wake_filter(priv, NULL); + + /* clear the enabled protocols */ + hw->enabled_protocols = 0; + + /* switch decoder */ + hw->decoder = decoder; + if (!decoder) + goto unlock; + + /* set the enabled protocols */ + if (!proto) + proto = decoder->type; + hw->enabled_protocols = proto; + + /* write the new timings */ + img_ir_decoder_convert(decoder, &hw->reg_timings, hw->clk_hz); + img_ir_write_timings(priv, &hw->reg_timings.timings, RC_FILTER_NORMAL); + + /* set up and enable */ + img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); + + +unlock: + spin_unlock_irq(&priv->lock); +} + +/** + * img_ir_decoder_compatable() - Find whether a decoder will work with a device. + * @priv: IR private data. + * @dec: Decoder to check. + * + * Returns: true if @dec is compatible with the device @priv refers to. + */ +static bool img_ir_decoder_compatible(struct img_ir_priv *priv, + const struct img_ir_decoder *dec) +{ + unsigned int ct; + + /* don't accept decoders using code types which aren't supported */ + ct = dec->control.code_type; + if (priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_BROKEN) + return false; + + return true; +} + +/** + * img_ir_allowed_protos() - Get allowed protocols from global decoder list. + * @priv: IR private data. + * + * Returns: Mask of protocols supported by the device @priv refers to. + */ +static u64 img_ir_allowed_protos(struct img_ir_priv *priv) +{ + u64 protos = 0; + struct img_ir_decoder **decp; + + for (decp = img_ir_decoders; *decp; ++decp) { + const struct img_ir_decoder *dec = *decp; + if (img_ir_decoder_compatible(priv, dec)) + protos |= dec->type; + } + return protos; +} + +/* Callback for changing protocol using sysfs */ +static int img_ir_change_protocol(struct rc_dev *dev, u64 *ir_type) +{ + struct img_ir_priv *priv = dev->priv; + struct img_ir_priv_hw *hw = &priv->hw; + struct rc_dev *rdev = hw->rdev; + struct img_ir_decoder **decp; + u64 wakeup_protocols; + + if (!*ir_type) { + /* disable all protocols */ + img_ir_set_decoder(priv, NULL, 0); + goto success; + } + for (decp = img_ir_decoders; *decp; ++decp) { + const struct img_ir_decoder *dec = *decp; + if (!img_ir_decoder_compatible(priv, dec)) + continue; + if (*ir_type & dec->type) { + *ir_type &= dec->type; + img_ir_set_decoder(priv, dec, *ir_type); + goto success; + } + } + return -EINVAL; + +success: + /* + * Only allow matching wakeup protocols for now, and only if filtering + * is supported. + */ + wakeup_protocols = *ir_type; + if (!hw->decoder || !hw->decoder->filter) + wakeup_protocols = 0; + rdev->allowed_wakeup_protocols = wakeup_protocols; + rdev->enabled_wakeup_protocols = wakeup_protocols; + return 0; +} + +/* Changes ir-core protocol device attribute */ +static void img_ir_set_protocol(struct img_ir_priv *priv, u64 proto) +{ + struct rc_dev *rdev = priv->hw.rdev; + + spin_lock_irq(&rdev->rc_map.lock); + rdev->rc_map.rc_type = __ffs64(proto); + spin_unlock_irq(&rdev->rc_map.lock); + + mutex_lock(&rdev->lock); + rdev->enabled_protocols = proto; + rdev->allowed_wakeup_protocols = proto; + rdev->enabled_wakeup_protocols = proto; + mutex_unlock(&rdev->lock); +} + +/* Set up IR decoders */ +static void img_ir_init_decoders(void) +{ + struct img_ir_decoder **decp; + + spin_lock(&img_ir_decoders_lock); + if (!img_ir_decoders_preprocessed) { + for (decp = img_ir_decoders; *decp; ++decp) + img_ir_decoder_preprocess(*decp); + img_ir_decoders_preprocessed = true; + } + spin_unlock(&img_ir_decoders_lock); +} + +#ifdef CONFIG_PM_SLEEP +/** + * img_ir_enable_wake() - Switch to wake mode. + * @priv: IR private data. + * + * Returns: non-zero if the IR can wake the system. + */ +static int img_ir_enable_wake(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + int ret = 0; + + spin_lock_irq(&priv->lock); + if (hw->flags & IMG_IR_F_WAKE) { + /* interrupt only on a match */ + hw->suspend_irqen = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_DATA_MATCH); + img_ir_write_filter(priv, &hw->filters[RC_FILTER_WAKEUP]); + img_ir_write_timings(priv, &hw->reg_timings.timings, + RC_FILTER_WAKEUP); + hw->mode = IMG_IR_M_WAKE; + ret = 1; + } + spin_unlock_irq(&priv->lock); + return ret; +} + +/** + * img_ir_disable_wake() - Switch out of wake mode. + * @priv: IR private data + * + * Returns: 1 if the hardware should be allowed to wake from a sleep state. + * 0 otherwise. + */ +static int img_ir_disable_wake(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + int ret = 0; + + spin_lock_irq(&priv->lock); + if (hw->flags & IMG_IR_F_WAKE) { + /* restore normal filtering */ + if (hw->flags & IMG_IR_F_FILTER) { + img_ir_write(priv, IMG_IR_IRQ_ENABLE, + (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | + IMG_IR_IRQ_DATA_MATCH); + img_ir_write_filter(priv, + &hw->filters[RC_FILTER_NORMAL]); + } else { + img_ir_write(priv, IMG_IR_IRQ_ENABLE, + (hw->suspend_irqen & IMG_IR_IRQ_EDGE) | + IMG_IR_IRQ_DATA_VALID | + IMG_IR_IRQ_DATA2_VALID); + img_ir_write_filter(priv, NULL); + } + img_ir_write_timings(priv, &hw->reg_timings.timings, + RC_FILTER_NORMAL); + hw->mode = IMG_IR_M_NORMAL; + ret = 1; + } + spin_unlock_irq(&priv->lock); + return ret; +} +#endif /* CONFIG_PM_SLEEP */ + +/* lock must be held */ +static void img_ir_begin_repeat(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + if (hw->mode == IMG_IR_M_NORMAL) { + /* switch to repeat timings */ + img_ir_write(priv, IMG_IR_CONTROL, 0); + hw->mode = IMG_IR_M_REPEATING; + img_ir_write_timings(priv, &hw->reg_timings.rtimings, + RC_FILTER_NORMAL); + img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); + } +} + +/* lock must be held */ +static void img_ir_end_repeat(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + if (hw->mode == IMG_IR_M_REPEATING) { + /* switch to normal timings */ + img_ir_write(priv, IMG_IR_CONTROL, 0); + hw->mode = IMG_IR_M_NORMAL; + img_ir_write_timings(priv, &hw->reg_timings.timings, + RC_FILTER_NORMAL); + img_ir_write(priv, IMG_IR_CONTROL, hw->reg_timings.ctrl); + } +} + +/* lock must be held */ +static void img_ir_handle_data(struct img_ir_priv *priv, u32 len, u64 raw) +{ + struct img_ir_priv_hw *hw = &priv->hw; + const struct img_ir_decoder *dec = hw->decoder; + int ret = IMG_IR_SCANCODE; + struct img_ir_scancode_req request; + + request.protocol = RC_TYPE_UNKNOWN; + request.toggle = 0; + + if (dec->scancode) + ret = dec->scancode(len, raw, hw->enabled_protocols, &request); + else if (len >= 32) + request.scancode = (u32)raw; + else if (len < 32) + request.scancode = (u32)raw & ((1 << len)-1); + dev_dbg(priv->dev, "data (%u bits) = %#llx\n", + len, (unsigned long long)raw); + if (ret == IMG_IR_SCANCODE) { + dev_dbg(priv->dev, "decoded scan code %#x, toggle %u\n", + request.scancode, request.toggle); + rc_keydown(hw->rdev, request.protocol, request.scancode, + request.toggle); + img_ir_end_repeat(priv); + } else if (ret == IMG_IR_REPEATCODE) { + if (hw->mode == IMG_IR_M_REPEATING) { + dev_dbg(priv->dev, "decoded repeat code\n"); + rc_repeat(hw->rdev); + } else { + dev_dbg(priv->dev, "decoded unexpected repeat code, ignoring\n"); + } + } else { + dev_dbg(priv->dev, "decode failed (%d)\n", ret); + return; + } + + + /* we mustn't update the end timer while trying to stop it */ + if (dec->repeat && !hw->stopping) { + unsigned long interval; + + img_ir_begin_repeat(priv); + + /* update timer, but allowing for 1/8th tolerance */ + interval = dec->repeat + (dec->repeat >> 3); + mod_timer(&hw->end_timer, + jiffies + msecs_to_jiffies(interval)); + } +} + +/* timer function to end waiting for repeat. */ +static void img_ir_end_timer(unsigned long arg) +{ + struct img_ir_priv *priv = (struct img_ir_priv *)arg; + + spin_lock_irq(&priv->lock); + img_ir_end_repeat(priv); + spin_unlock_irq(&priv->lock); +} + +/* + * Timer function to re-enable the current protocol after it had been + * cleared when invalid interrupts were generated due to a quirk in the + * img-ir decoder. + */ +static void img_ir_suspend_timer(unsigned long arg) +{ + struct img_ir_priv *priv = (struct img_ir_priv *)arg; + + spin_lock_irq(&priv->lock); + /* + * Don't overwrite enabled valid/match IRQs if they have already been + * changed by e.g. a filter change. + */ + if ((priv->hw.quirk_suspend_irq & IMG_IR_IRQ_EDGE) == + img_ir_read(priv, IMG_IR_IRQ_ENABLE)) + img_ir_write(priv, IMG_IR_IRQ_ENABLE, + priv->hw.quirk_suspend_irq); + /* enable */ + img_ir_write(priv, IMG_IR_CONTROL, priv->hw.reg_timings.ctrl); + spin_unlock_irq(&priv->lock); +} + +#ifdef CONFIG_COMMON_CLK +static void img_ir_change_frequency(struct img_ir_priv *priv, + struct clk_notifier_data *change) +{ + struct img_ir_priv_hw *hw = &priv->hw; + + dev_dbg(priv->dev, "clk changed %lu HZ -> %lu HZ\n", + change->old_rate, change->new_rate); + + spin_lock_irq(&priv->lock); + if (hw->clk_hz == change->new_rate) + goto unlock; + hw->clk_hz = change->new_rate; + /* refresh current timings */ + if (hw->decoder) { + img_ir_decoder_convert(hw->decoder, &hw->reg_timings, + hw->clk_hz); + switch (hw->mode) { + case IMG_IR_M_NORMAL: + img_ir_write_timings(priv, &hw->reg_timings.timings, + RC_FILTER_NORMAL); + break; + case IMG_IR_M_REPEATING: + img_ir_write_timings(priv, &hw->reg_timings.rtimings, + RC_FILTER_NORMAL); + break; +#ifdef CONFIG_PM_SLEEP + case IMG_IR_M_WAKE: + img_ir_write_timings(priv, &hw->reg_timings.timings, + RC_FILTER_WAKEUP); + break; +#endif + } + } +unlock: + spin_unlock_irq(&priv->lock); +} + +static int img_ir_clk_notify(struct notifier_block *self, unsigned long action, + void *data) +{ + struct img_ir_priv *priv = container_of(self, struct img_ir_priv, + hw.clk_nb); + switch (action) { + case POST_RATE_CHANGE: + img_ir_change_frequency(priv, data); + break; + default: + break; + } + return NOTIFY_OK; +} +#endif /* CONFIG_COMMON_CLK */ + +/* called with priv->lock held */ +void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) +{ + struct img_ir_priv_hw *hw = &priv->hw; + u32 ir_status, len, lw, up; + unsigned int ct; + + /* use the current decoder */ + if (!hw->decoder) + return; + + ct = hw->decoder->control.code_type; + + ir_status = img_ir_read(priv, IMG_IR_STATUS); + if (!(ir_status & (IMG_IR_RXDVAL | IMG_IR_RXDVALD2))) { + if (!(priv->hw.ct_quirks[ct] & IMG_IR_QUIRK_CODE_IRQ) || + hw->stopping) + return; + /* + * The below functionality is added as a work around to stop + * multiple Interrupts generated when an incomplete IR code is + * received by the decoder. + * The decoder generates rapid interrupts without actually + * having received any new data. After a single interrupt it's + * expected to clear up, but instead multiple interrupts are + * rapidly generated. only way to get out of this loop is to + * reset the control register after a short delay. + */ + img_ir_write(priv, IMG_IR_CONTROL, 0); + hw->quirk_suspend_irq = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, + hw->quirk_suspend_irq & IMG_IR_IRQ_EDGE); + + /* Timer activated to re-enable the protocol. */ + mod_timer(&hw->suspend_timer, + jiffies + msecs_to_jiffies(5)); + return; + } + ir_status &= ~(IMG_IR_RXDVAL | IMG_IR_RXDVALD2); + img_ir_write(priv, IMG_IR_STATUS, ir_status); + + len = (ir_status & IMG_IR_RXDLEN) >> IMG_IR_RXDLEN_SHIFT; + /* some versions report wrong length for certain code types */ + if (hw->ct_quirks[ct] & IMG_IR_QUIRK_CODE_LEN_INCR) + ++len; + + lw = img_ir_read(priv, IMG_IR_DATA_LW); + up = img_ir_read(priv, IMG_IR_DATA_UP); + img_ir_handle_data(priv, len, (u64)up << 32 | lw); +} + +void img_ir_setup_hw(struct img_ir_priv *priv) +{ + struct img_ir_decoder **decp; + + if (!priv->hw.rdev) + return; + + /* Use the first available decoder (or disable stuff if NULL) */ + for (decp = img_ir_decoders; *decp; ++decp) { + const struct img_ir_decoder *dec = *decp; + if (img_ir_decoder_compatible(priv, dec)) { + img_ir_set_protocol(priv, dec->type); + img_ir_set_decoder(priv, dec, 0); + return; + } + } + img_ir_set_decoder(priv, NULL, 0); +} + +/** + * img_ir_probe_hw_caps() - Probe capabilities of the hardware. + * @priv: IR private data. + */ +static void img_ir_probe_hw_caps(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + /* + * When a version of the block becomes available without these quirks, + * they'll have to depend on the core revision. + */ + hw->ct_quirks[IMG_IR_CODETYPE_PULSELEN] + |= IMG_IR_QUIRK_CODE_LEN_INCR; + hw->ct_quirks[IMG_IR_CODETYPE_BIPHASE] + |= IMG_IR_QUIRK_CODE_IRQ; + hw->ct_quirks[IMG_IR_CODETYPE_2BITPULSEPOS] + |= IMG_IR_QUIRK_CODE_BROKEN; +} + +int img_ir_probe_hw(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + struct rc_dev *rdev; + int error; + + /* Ensure hardware decoders have been preprocessed */ + img_ir_init_decoders(); + + /* Probe hardware capabilities */ + img_ir_probe_hw_caps(priv); + + /* Set up the end timer */ + setup_timer(&hw->end_timer, img_ir_end_timer, (unsigned long)priv); + setup_timer(&hw->suspend_timer, img_ir_suspend_timer, + (unsigned long)priv); + + /* Register a clock notifier */ + if (!IS_ERR(priv->clk)) { + hw->clk_hz = clk_get_rate(priv->clk); +#ifdef CONFIG_COMMON_CLK + hw->clk_nb.notifier_call = img_ir_clk_notify; + error = clk_notifier_register(priv->clk, &hw->clk_nb); + if (error) + dev_warn(priv->dev, + "failed to register clock notifier\n"); +#endif + } else { + hw->clk_hz = 32768; + } + + /* Allocate hardware decoder */ + hw->rdev = rdev = rc_allocate_device(); + if (!rdev) { + dev_err(priv->dev, "cannot allocate input device\n"); + error = -ENOMEM; + goto err_alloc_rc; + } + rdev->priv = priv; + rdev->map_name = RC_MAP_EMPTY; + rdev->allowed_protocols = img_ir_allowed_protos(priv); + rdev->input_name = "IMG Infrared Decoder"; + rdev->s_filter = img_ir_set_normal_filter; + rdev->s_wakeup_filter = img_ir_set_wakeup_filter; + + /* Register hardware decoder */ + error = rc_register_device(rdev); + if (error) { + dev_err(priv->dev, "failed to register IR input device\n"); + goto err_register_rc; + } + + /* + * Set this after rc_register_device as no protocols have been + * registered yet. + */ + rdev->change_protocol = img_ir_change_protocol; + + device_init_wakeup(priv->dev, 1); + + return 0; + +err_register_rc: + img_ir_set_decoder(priv, NULL, 0); + hw->rdev = NULL; + rc_free_device(rdev); +err_alloc_rc: +#ifdef CONFIG_COMMON_CLK + if (!IS_ERR(priv->clk)) + clk_notifier_unregister(priv->clk, &hw->clk_nb); +#endif + return error; +} + +void img_ir_remove_hw(struct img_ir_priv *priv) +{ + struct img_ir_priv_hw *hw = &priv->hw; + struct rc_dev *rdev = hw->rdev; + if (!rdev) + return; + img_ir_set_decoder(priv, NULL, 0); + hw->rdev = NULL; + rc_unregister_device(rdev); +#ifdef CONFIG_COMMON_CLK + if (!IS_ERR(priv->clk)) + clk_notifier_unregister(priv->clk, &hw->clk_nb); +#endif +} + +#ifdef CONFIG_PM_SLEEP +int img_ir_suspend(struct device *dev) +{ + struct img_ir_priv *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && img_ir_enable_wake(priv)) + enable_irq_wake(priv->irq); + return 0; +} + +int img_ir_resume(struct device *dev) +{ + struct img_ir_priv *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && img_ir_disable_wake(priv)) + disable_irq_wake(priv->irq); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ diff --git a/kernel/drivers/media/rc/img-ir/img-ir-hw.h b/kernel/drivers/media/rc/img-ir/img-ir-hw.h new file mode 100644 index 000000000..91a297731 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-hw.h @@ -0,0 +1,301 @@ +/* + * ImgTec IR Hardware Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IMG_IR_HW_H_ +#define _IMG_IR_HW_H_ + +#include +#include + +/* constants */ + +#define IMG_IR_CODETYPE_PULSELEN 0x0 /* Sony */ +#define IMG_IR_CODETYPE_PULSEDIST 0x1 /* NEC, Toshiba, Micom, Sharp */ +#define IMG_IR_CODETYPE_BIPHASE 0x2 /* RC-5/6 */ +#define IMG_IR_CODETYPE_2BITPULSEPOS 0x3 /* RC-MM */ + + +/* Timing information */ + +/** + * struct img_ir_control - Decoder control settings + * @decoden: Primary decoder enable + * @code_type: Decode type (see IMG_IR_CODETYPE_*) + * @hdrtog: Detect header toggle symbol after leader symbol + * @ldrdec: Don't discard leader if maximum width reached + * @decodinpol: Decoder input polarity (1=active high) + * @bitorien: Bit orientation (1=MSB first) + * @d1validsel: Decoder 2 takes over if it detects valid data + * @bitinv: Bit inversion switch (1=don't invert) + * @decodend2: Secondary decoder enable (no leader symbol) + * @bitoriend2: Bit orientation (1=MSB first) + * @bitinvd2: Secondary decoder bit inversion switch (1=don't invert) + */ +struct img_ir_control { + unsigned decoden:1; + unsigned code_type:2; + unsigned hdrtog:1; + unsigned ldrdec:1; + unsigned decodinpol:1; + unsigned bitorien:1; + unsigned d1validsel:1; + unsigned bitinv:1; + unsigned decodend2:1; + unsigned bitoriend2:1; + unsigned bitinvd2:1; +}; + +/** + * struct img_ir_timing_range - range of timing values + * @min: Minimum timing value + * @max: Maximum timing value (if < @min, this will be set to @min during + * preprocessing step, so it is normally not explicitly initialised + * and is taken care of by the tolerance) + */ +struct img_ir_timing_range { + u16 min; + u16 max; +}; + +/** + * struct img_ir_symbol_timing - timing data for a symbol + * @pulse: Timing range for the length of the pulse in this symbol + * @space: Timing range for the length of the space in this symbol + */ +struct img_ir_symbol_timing { + struct img_ir_timing_range pulse; + struct img_ir_timing_range space; +}; + +/** + * struct img_ir_free_timing - timing data for free time symbol + * @minlen: Minimum number of bits of data + * @maxlen: Maximum number of bits of data + * @ft_min: Minimum free time after message + */ +struct img_ir_free_timing { + /* measured in bits */ + u8 minlen; + u8 maxlen; + u16 ft_min; +}; + +/** + * struct img_ir_timings - Timing values. + * @ldr: Leader symbol timing data + * @s00: Zero symbol timing data for primary decoder + * @s01: One symbol timing data for primary decoder + * @s10: Zero symbol timing data for secondary (no leader symbol) decoder + * @s11: One symbol timing data for secondary (no leader symbol) decoder + * @ft: Free time symbol timing data + */ +struct img_ir_timings { + struct img_ir_symbol_timing ldr, s00, s01, s10, s11; + struct img_ir_free_timing ft; +}; + +/** + * struct img_ir_filter - Filter IR events. + * @data: Data to match. + * @mask: Mask of bits to compare. + * @minlen: Additional minimum number of bits. + * @maxlen: Additional maximum number of bits. + */ +struct img_ir_filter { + u64 data; + u64 mask; + u8 minlen; + u8 maxlen; +}; + +/** + * struct img_ir_timing_regvals - Calculated timing register values. + * @ldr: Leader symbol timing register value + * @s00: Zero symbol timing register value for primary decoder + * @s01: One symbol timing register value for primary decoder + * @s10: Zero symbol timing register value for secondary decoder + * @s11: One symbol timing register value for secondary decoder + * @ft: Free time symbol timing register value + */ +struct img_ir_timing_regvals { + u32 ldr, s00, s01, s10, s11, ft; +}; + +#define IMG_IR_SCANCODE 0 /* new scancode */ +#define IMG_IR_REPEATCODE 1 /* repeat the previous code */ + +/** + * struct img_ir_scancode_req - Scancode request data. + * @protocol: Protocol code of received message (defaults to + * RC_TYPE_UNKNOWN). + * @scancode: Scan code of received message (must be written by + * handler if IMG_IR_SCANCODE is returned). + * @toggle: Toggle bit (defaults to 0). + */ +struct img_ir_scancode_req { + enum rc_type protocol; + u32 scancode; + u8 toggle; +}; + +/** + * struct img_ir_decoder - Decoder settings for an IR protocol. + * @type: Protocol types bitmap. + * @tolerance: Timing tolerance as a percentage (default 10%). + * @unit: Unit of timings in nanoseconds (default 1 us). + * @timings: Primary timings + * @rtimings: Additional override timings while waiting for repeats. + * @repeat: Maximum repeat interval (always in milliseconds). + * @control: Control flags. + * + * @scancode: Pointer to function to convert the IR data into a scancode (it + * must be safe to execute in interrupt context). + * Returns IMG_IR_SCANCODE to emit new scancode. + * Returns IMG_IR_REPEATCODE to repeat previous code. + * Returns -errno (e.g. -EINVAL) on error. + * @filter: Pointer to function to convert scancode filter to raw hardware + * filter. The minlen and maxlen fields will have been initialised + * to the maximum range. + */ +struct img_ir_decoder { + /* core description */ + u64 type; + unsigned int tolerance; + unsigned int unit; + struct img_ir_timings timings; + struct img_ir_timings rtimings; + unsigned int repeat; + struct img_ir_control control; + + /* scancode logic */ + int (*scancode)(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request); + int (*filter)(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols); +}; + +extern struct img_ir_decoder img_ir_nec; +extern struct img_ir_decoder img_ir_jvc; +extern struct img_ir_decoder img_ir_sony; +extern struct img_ir_decoder img_ir_sharp; +extern struct img_ir_decoder img_ir_sanyo; +extern struct img_ir_decoder img_ir_rc5; +extern struct img_ir_decoder img_ir_rc6; + +/** + * struct img_ir_reg_timings - Reg values for decoder timings at clock rate. + * @ctrl: Processed control register value. + * @timings: Processed primary timings. + * @rtimings: Processed repeat timings. + */ +struct img_ir_reg_timings { + u32 ctrl; + struct img_ir_timing_regvals timings; + struct img_ir_timing_regvals rtimings; +}; + +struct img_ir_priv; + +#ifdef CONFIG_IR_IMG_HW + +enum img_ir_mode { + IMG_IR_M_NORMAL, + IMG_IR_M_REPEATING, +#ifdef CONFIG_PM_SLEEP + IMG_IR_M_WAKE, +#endif +}; + +/** + * struct img_ir_priv_hw - Private driver data for hardware decoder. + * @ct_quirks: Quirk bits for each code type. + * @rdev: Remote control device + * @clk_nb: Notifier block for clock notify events. + * @end_timer: Timer until repeat timeout. + * @suspend_timer: Timer to re-enable protocol. + * @decoder: Current decoder settings. + * @enabled_protocols: Currently enabled protocols. + * @clk_hz: Current core clock rate in Hz. + * @reg_timings: Timing reg values for decoder at clock rate. + * @flags: IMG_IR_F_*. + * @filters: HW filters (derived from scancode filters). + * @mode: Current decode mode. + * @stopping: Indicates that decoder is being taken down and timers + * should not be restarted. + * @suspend_irqen: Saved IRQ enable mask over suspend. + * @quirk_suspend_irq: Saved IRQ enable mask over quirk suspend timer. + */ +struct img_ir_priv_hw { + unsigned int ct_quirks[4]; + struct rc_dev *rdev; + struct notifier_block clk_nb; + struct timer_list end_timer; + struct timer_list suspend_timer; + const struct img_ir_decoder *decoder; + u64 enabled_protocols; + unsigned long clk_hz; + struct img_ir_reg_timings reg_timings; + unsigned int flags; + struct img_ir_filter filters[RC_FILTER_MAX]; + + enum img_ir_mode mode; + bool stopping; + u32 suspend_irqen; + u32 quirk_suspend_irq; +}; + +static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) +{ + return hw->rdev; +}; + +void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status); +void img_ir_setup_hw(struct img_ir_priv *priv); +int img_ir_probe_hw(struct img_ir_priv *priv); +void img_ir_remove_hw(struct img_ir_priv *priv); + +#ifdef CONFIG_PM_SLEEP +int img_ir_suspend(struct device *dev); +int img_ir_resume(struct device *dev); +#else +#define img_ir_suspend NULL +#define img_ir_resume NULL +#endif + +#else + +struct img_ir_priv_hw { +}; + +static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) +{ + return false; +}; +static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) +{ +} +static inline void img_ir_setup_hw(struct img_ir_priv *priv) +{ +} +static inline int img_ir_probe_hw(struct img_ir_priv *priv) +{ + return -ENODEV; +} +static inline void img_ir_remove_hw(struct img_ir_priv *priv) +{ +} + +#define img_ir_suspend NULL +#define img_ir_resume NULL + +#endif /* CONFIG_IR_IMG_HW */ + +#endif /* _IMG_IR_HW_H_ */ diff --git a/kernel/drivers/media/rc/img-ir/img-ir-jvc.c b/kernel/drivers/media/rc/img-ir/img-ir-jvc.c new file mode 100644 index 000000000..d3e2fc0bc --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-jvc.c @@ -0,0 +1,88 @@ +/* + * ImgTec IR Decoder setup for JVC protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" + +/* Convert JVC data to a scancode */ +static int img_ir_jvc_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int cust, data; + + if (len != 16) + return -EINVAL; + + cust = (raw >> 0) & 0xff; + data = (raw >> 8) & 0xff; + + request->protocol = RC_TYPE_JVC; + request->scancode = cust << 8 | data; + return IMG_IR_SCANCODE; +} + +/* Convert JVC scancode to JVC data filter */ +static int img_ir_jvc_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + unsigned int cust, data; + unsigned int cust_m, data_m; + + cust = (in->data >> 8) & 0xff; + cust_m = (in->mask >> 8) & 0xff; + data = (in->data >> 0) & 0xff; + data_m = (in->mask >> 0) & 0xff; + + out->data = cust | data << 8; + out->mask = cust_m | data_m << 8; + + return 0; +} + +/* + * JVC decoder + * See also http://www.sbprojects.com/knowledge/ir/jvc.php + * http://support.jvc.com/consumer/support/documents/RemoteCodes.pdf + */ +struct img_ir_decoder img_ir_jvc = { + .type = RC_BIT_JVC, + .control = { + .decoden = 1, + .code_type = IMG_IR_CODETYPE_PULSEDIST, + }, + /* main timings */ + .unit = 527500, /* 527.5 us */ + .timings = { + /* leader symbol */ + .ldr = { + .pulse = { 16 /* 8.44 ms */ }, + .space = { 8 /* 4.22 ms */ }, + }, + /* 0 symbol */ + .s00 = { + .pulse = { 1 /* 527.5 us +-60 us */ }, + .space = { 1 /* 527.5 us */ }, + }, + /* 1 symbol */ + .s01 = { + .pulse = { 1 /* 527.5 us +-60 us */ }, + .space = { 3 /* 1.5825 ms +-40 us */ }, + }, + /* free time */ + .ft = { + .minlen = 16, + .maxlen = 16, + .ft_min = 10, /* 5.275 ms */ + }, + }, + /* scancode logic */ + .scancode = img_ir_jvc_scancode, + .filter = img_ir_jvc_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-nec.c b/kernel/drivers/media/rc/img-ir/img-ir-nec.c new file mode 100644 index 000000000..27a7ea8f1 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-nec.c @@ -0,0 +1,158 @@ +/* + * ImgTec IR Decoder setup for NEC protocol. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" +#include + +/* Convert NEC data to a scancode */ +static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int addr, addr_inv, data, data_inv; + /* a repeat code has no data */ + if (!len) + return IMG_IR_REPEATCODE; + if (len != 32) + return -EINVAL; + /* raw encoding: ddDDaaAA */ + addr = (raw >> 0) & 0xff; + addr_inv = (raw >> 8) & 0xff; + data = (raw >> 16) & 0xff; + data_inv = (raw >> 24) & 0xff; + if ((data_inv ^ data) != 0xff) { + /* 32-bit NEC (used by Apple and TiVo remotes) */ + /* scan encoding: as transmitted, MSBit = first received bit */ + request->scancode = bitrev8(addr) << 24 | + bitrev8(addr_inv) << 16 | + bitrev8(data) << 8 | + bitrev8(data_inv); + } else if ((addr_inv ^ addr) != 0xff) { + /* Extended NEC */ + /* scan encoding: AAaaDD */ + request->scancode = addr << 16 | + addr_inv << 8 | + data; + } else { + /* Normal NEC */ + /* scan encoding: AADD */ + request->scancode = addr << 8 | + data; + } + request->protocol = RC_TYPE_NEC; + return IMG_IR_SCANCODE; +} + +/* Convert NEC scancode to NEC data filter */ +static int img_ir_nec_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + unsigned int addr, addr_inv, data, data_inv; + unsigned int addr_m, addr_inv_m, data_m, data_inv_m; + + data = in->data & 0xff; + data_m = in->mask & 0xff; + + if ((in->data | in->mask) & 0xff000000) { + /* 32-bit NEC (used by Apple and TiVo remotes) */ + /* scan encoding: as transmitted, MSBit = first received bit */ + addr = bitrev8(in->data >> 24); + addr_m = bitrev8(in->mask >> 24); + addr_inv = bitrev8(in->data >> 16); + addr_inv_m = bitrev8(in->mask >> 16); + data = bitrev8(in->data >> 8); + data_m = bitrev8(in->mask >> 8); + data_inv = bitrev8(in->data >> 0); + data_inv_m = bitrev8(in->mask >> 0); + } else if ((in->data | in->mask) & 0x00ff0000) { + /* Extended NEC */ + /* scan encoding AAaaDD */ + addr = (in->data >> 16) & 0xff; + addr_m = (in->mask >> 16) & 0xff; + addr_inv = (in->data >> 8) & 0xff; + addr_inv_m = (in->mask >> 8) & 0xff; + data_inv = data ^ 0xff; + data_inv_m = data_m; + } else { + /* Normal NEC */ + /* scan encoding: AADD */ + addr = (in->data >> 8) & 0xff; + addr_m = (in->mask >> 8) & 0xff; + addr_inv = addr ^ 0xff; + addr_inv_m = addr_m; + data_inv = data ^ 0xff; + data_inv_m = data_m; + } + + /* raw encoding: ddDDaaAA */ + out->data = data_inv << 24 | + data << 16 | + addr_inv << 8 | + addr; + out->mask = data_inv_m << 24 | + data_m << 16 | + addr_inv_m << 8 | + addr_m; + return 0; +} + +/* + * NEC decoder + * See also http://www.sbprojects.com/knowledge/ir/nec.php + * http://wiki.altium.com/display/ADOH/NEC+Infrared+Transmission+Protocol + */ +struct img_ir_decoder img_ir_nec = { + .type = RC_BIT_NEC, + .control = { + .decoden = 1, + .code_type = IMG_IR_CODETYPE_PULSEDIST, + }, + /* main timings */ + .unit = 562500, /* 562.5 us */ + .timings = { + /* leader symbol */ + .ldr = { + .pulse = { 16 /* 9ms */ }, + .space = { 8 /* 4.5ms */ }, + }, + /* 0 symbol */ + .s00 = { + .pulse = { 1 /* 562.5 us */ }, + .space = { 1 /* 562.5 us */ }, + }, + /* 1 symbol */ + .s01 = { + .pulse = { 1 /* 562.5 us */ }, + .space = { 3 /* 1687.5 us */ }, + }, + /* free time */ + .ft = { + .minlen = 32, + .maxlen = 32, + .ft_min = 10, /* 5.625 ms */ + }, + }, + /* repeat codes */ + .repeat = 108, /* 108 ms */ + .rtimings = { + /* leader symbol */ + .ldr = { + .space = { 4 /* 2.25 ms */ }, + }, + /* free time */ + .ft = { + .minlen = 0, /* repeat code has no data */ + .maxlen = 0, + }, + }, + /* scancode logic */ + .scancode = img_ir_nec_scancode, + .filter = img_ir_nec_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-raw.c b/kernel/drivers/media/rc/img-ir/img-ir-raw.c new file mode 100644 index 000000000..33f37ed87 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-raw.c @@ -0,0 +1,156 @@ +/* + * ImgTec IR Raw Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This ties into the input subsystem using the RC-core in raw mode. Raw IR + * signal edges are reported and decoded by generic software decoders. + */ + +#include +#include +#include "img-ir.h" + +#define ECHO_TIMEOUT_MS 150 /* ms between echos */ + +/* must be called with priv->lock held */ +static void img_ir_refresh_raw(struct img_ir_priv *priv, u32 irq_status) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rc_dev = priv->raw.rdev; + int multiple; + u32 ir_status; + + /* find whether both rise and fall was detected */ + multiple = ((irq_status & IMG_IR_IRQ_EDGE) == IMG_IR_IRQ_EDGE); + /* + * If so, we need to see if the level has actually changed. + * If it's just noise that we didn't have time to process, + * there's no point reporting it. + */ + ir_status = img_ir_read(priv, IMG_IR_STATUS) & IMG_IR_IRRXD; + if (multiple && ir_status == raw->last_status) + return; + raw->last_status = ir_status; + + /* report the edge to the IR raw decoders */ + if (ir_status) /* low */ + ir_raw_event_store_edge(rc_dev, IR_SPACE); + else /* high */ + ir_raw_event_store_edge(rc_dev, IR_PULSE); + ir_raw_event_handle(rc_dev); +} + +/* called with priv->lock held */ +void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status) +{ + struct img_ir_priv_raw *raw = &priv->raw; + + /* check not removing */ + if (!raw->rdev) + return; + + img_ir_refresh_raw(priv, irq_status); + + /* start / push back the echo timer */ + mod_timer(&raw->timer, jiffies + msecs_to_jiffies(ECHO_TIMEOUT_MS)); +} + +/* + * Echo timer callback function. + * The raw decoders expect to get a final sample even if there are no edges, in + * order to be assured of the final space. If there are no edges for a certain + * time we use this timer to emit a final sample to satisfy them. + */ +static void img_ir_echo_timer(unsigned long arg) +{ + struct img_ir_priv *priv = (struct img_ir_priv *)arg; + + spin_lock_irq(&priv->lock); + + /* check not removing */ + if (priv->raw.rdev) + /* + * It's safe to pass irq_status=0 since it's only used to check + * for double edges. + */ + img_ir_refresh_raw(priv, 0); + + spin_unlock_irq(&priv->lock); +} + +void img_ir_setup_raw(struct img_ir_priv *priv) +{ + u32 irq_en; + + if (!priv->raw.rdev) + return; + + /* clear and enable edge interrupts */ + spin_lock_irq(&priv->lock); + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + irq_en |= IMG_IR_IRQ_EDGE; + img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE); + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); + spin_unlock_irq(&priv->lock); +} + +int img_ir_probe_raw(struct img_ir_priv *priv) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rdev; + int error; + + /* Set up the echo timer */ + setup_timer(&raw->timer, img_ir_echo_timer, (unsigned long)priv); + + /* Allocate raw decoder */ + raw->rdev = rdev = rc_allocate_device(); + if (!rdev) { + dev_err(priv->dev, "cannot allocate raw input device\n"); + return -ENOMEM; + } + rdev->priv = priv; + rdev->map_name = RC_MAP_EMPTY; + rdev->input_name = "IMG Infrared Decoder Raw"; + rdev->driver_type = RC_DRIVER_IR_RAW; + + /* Register raw decoder */ + error = rc_register_device(rdev); + if (error) { + dev_err(priv->dev, "failed to register raw IR input device\n"); + rc_free_device(rdev); + raw->rdev = NULL; + return error; + } + + return 0; +} + +void img_ir_remove_raw(struct img_ir_priv *priv) +{ + struct img_ir_priv_raw *raw = &priv->raw; + struct rc_dev *rdev = raw->rdev; + u32 irq_en; + + if (!rdev) + return; + + /* switch off and disable raw (edge) interrupts */ + spin_lock_irq(&priv->lock); + raw->rdev = NULL; + irq_en = img_ir_read(priv, IMG_IR_IRQ_ENABLE); + irq_en &= ~IMG_IR_IRQ_EDGE; + img_ir_write(priv, IMG_IR_IRQ_ENABLE, irq_en); + img_ir_write(priv, IMG_IR_IRQ_CLEAR, IMG_IR_IRQ_EDGE); + spin_unlock_irq(&priv->lock); + + rc_unregister_device(rdev); + + del_timer_sync(&raw->timer); +} diff --git a/kernel/drivers/media/rc/img-ir/img-ir-raw.h b/kernel/drivers/media/rc/img-ir/img-ir-raw.h new file mode 100644 index 000000000..4c9b7676e --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-raw.h @@ -0,0 +1,65 @@ +/* + * ImgTec IR Raw Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IMG_IR_RAW_H_ +#define _IMG_IR_RAW_H_ + +struct img_ir_priv; + +#ifdef CONFIG_IR_IMG_RAW + +/** + * struct img_ir_priv_raw - Private driver data for raw decoder. + * @rdev: Raw remote control device + * @timer: Timer to echo samples to keep soft decoders happy. + * @last_status: Last raw status bits. + */ +struct img_ir_priv_raw { + struct rc_dev *rdev; + struct timer_list timer; + u32 last_status; +}; + +static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw) +{ + return raw->rdev; +}; + +void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status); +void img_ir_setup_raw(struct img_ir_priv *priv); +int img_ir_probe_raw(struct img_ir_priv *priv); +void img_ir_remove_raw(struct img_ir_priv *priv); + +#else + +struct img_ir_priv_raw { +}; +static inline bool img_ir_raw_enabled(struct img_ir_priv_raw *raw) +{ + return false; +}; +static inline void img_ir_isr_raw(struct img_ir_priv *priv, u32 irq_status) +{ +} +static inline void img_ir_setup_raw(struct img_ir_priv *priv) +{ +} +static inline int img_ir_probe_raw(struct img_ir_priv *priv) +{ + return -ENODEV; +} +static inline void img_ir_remove_raw(struct img_ir_priv *priv) +{ +} + +#endif /* CONFIG_IR_IMG_RAW */ + +#endif /* _IMG_IR_RAW_H_ */ diff --git a/kernel/drivers/media/rc/img-ir/img-ir-rc5.c b/kernel/drivers/media/rc/img-ir/img-ir-rc5.c new file mode 100644 index 000000000..a8a28a377 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-rc5.c @@ -0,0 +1,88 @@ +/* + * ImgTec IR Decoder setup for Philips RC-5 protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" + +/* Convert RC5 data to a scancode */ +static int img_ir_rc5_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int addr, cmd, tgl, start; + + /* Quirk in the decoder shifts everything by 2 to the left. */ + raw >>= 2; + + start = (raw >> 13) & 0x01; + tgl = (raw >> 11) & 0x01; + addr = (raw >> 6) & 0x1f; + cmd = raw & 0x3f; + /* + * 12th bit is used to extend the command in extended RC5 and has + * no effect on standard RC5. + */ + cmd += ((raw >> 12) & 0x01) ? 0 : 0x40; + + if (!start) + return -EINVAL; + + request->protocol = RC_TYPE_RC5; + request->scancode = addr << 8 | cmd; + request->toggle = tgl; + return IMG_IR_SCANCODE; +} + +/* Convert RC5 scancode to RC5 data filter */ +static int img_ir_rc5_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + /* Not supported by the hw. */ + return -EINVAL; +} + +/* + * RC-5 decoder + * see http://www.sbprojects.com/knowledge/ir/rc5.php + */ +struct img_ir_decoder img_ir_rc5 = { + .type = RC_BIT_RC5, + .control = { + .bitoriend2 = 1, + .code_type = IMG_IR_CODETYPE_BIPHASE, + .decodend2 = 1, + }, + /* main timings */ + .tolerance = 16, + .unit = 888888, /* 1/36k*32=888.888microseconds */ + .timings = { + /* 10 symbol */ + .s10 = { + .pulse = { 1 }, + .space = { 1 }, + }, + + /* 11 symbol */ + .s11 = { + .pulse = { 1 }, + .space = { 1 }, + }, + + /* free time */ + .ft = { + .minlen = 14, + .maxlen = 14, + .ft_min = 5, + }, + }, + + /* scancode logic */ + .scancode = img_ir_rc5_scancode, + .filter = img_ir_rc5_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-rc6.c b/kernel/drivers/media/rc/img-ir/img-ir-rc6.c new file mode 100644 index 000000000..de1e27534 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-rc6.c @@ -0,0 +1,117 @@ +/* + * ImgTec IR Decoder setup for Philips RC-6 protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" + +/* Convert RC6 data to a scancode */ +static int img_ir_rc6_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int addr, cmd, mode, trl1, trl2; + + /* + * Due to a side effect of the decoder handling the double length + * Trailer bit, the header information is a bit scrambled, and the + * raw data is shifted incorrectly. + * This workaround effectively recovers the header bits. + * + * The Header field should look like this: + * + * StartBit ModeBit2 ModeBit1 ModeBit0 TrailerBit + * + * But what we get is: + * + * ModeBit2 ModeBit1 ModeBit0 TrailerBit1 TrailerBit2 + * + * The start bit is not important to recover the scancode. + */ + + raw >>= 27; + + trl1 = (raw >> 17) & 0x01; + trl2 = (raw >> 16) & 0x01; + + mode = (raw >> 18) & 0x07; + addr = (raw >> 8) & 0xff; + cmd = raw & 0xff; + + /* + * Due to the above explained irregularity the trailer bits cannot + * have the same value. + */ + if (trl1 == trl2) + return -EINVAL; + + /* Only mode 0 supported for now */ + if (mode) + return -EINVAL; + + request->protocol = RC_TYPE_RC6_0; + request->scancode = addr << 8 | cmd; + request->toggle = trl2; + return IMG_IR_SCANCODE; +} + +/* Convert RC6 scancode to RC6 data filter */ +static int img_ir_rc6_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + /* Not supported by the hw. */ + return -EINVAL; +} + +/* + * RC-6 decoder + * see http://www.sbprojects.com/knowledge/ir/rc6.php + */ +struct img_ir_decoder img_ir_rc6 = { + .type = RC_BIT_RC6_0, + .control = { + .bitorien = 1, + .code_type = IMG_IR_CODETYPE_BIPHASE, + .decoden = 1, + .decodinpol = 1, + }, + /* main timings */ + .tolerance = 20, + /* + * Due to a quirk in the img-ir decoder, default header values do + * not work, the values described below were extracted from + * successful RTL test cases. + */ + .timings = { + /* leader symbol */ + .ldr = { + .pulse = { 650 }, + .space = { 660 }, + }, + /* 0 symbol */ + .s00 = { + .pulse = { 370 }, + .space = { 370 }, + }, + /* 01 symbol */ + .s01 = { + .pulse = { 370 }, + .space = { 370 }, + }, + /* free time */ + .ft = { + .minlen = 21, + .maxlen = 21, + .ft_min = 2666, /* 2.666 ms */ + }, + }, + + /* scancode logic */ + .scancode = img_ir_rc6_scancode, + .filter = img_ir_rc6_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-sanyo.c b/kernel/drivers/media/rc/img-ir/img-ir-sanyo.c new file mode 100644 index 000000000..f394994ff --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-sanyo.c @@ -0,0 +1,129 @@ +/* + * ImgTec IR Decoder setup for Sanyo protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * From ir-sanyo-decoder.c: + * + * This protocol uses the NEC protocol timings. However, data is formatted as: + * 13 bits Custom Code + * 13 bits NOT(Custom Code) + * 8 bits Key data + * 8 bits NOT(Key data) + * + * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon + * Information for this protocol is available at the Sanyo LC7461 datasheet. + */ + +#include "img-ir-hw.h" + +/* Convert Sanyo data to a scancode */ +static int img_ir_sanyo_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int addr, addr_inv, data, data_inv; + /* a repeat code has no data */ + if (!len) + return IMG_IR_REPEATCODE; + if (len != 42) + return -EINVAL; + addr = (raw >> 0) & 0x1fff; + addr_inv = (raw >> 13) & 0x1fff; + data = (raw >> 26) & 0xff; + data_inv = (raw >> 34) & 0xff; + /* Validate data */ + if ((data_inv ^ data) != 0xff) + return -EINVAL; + /* Validate address */ + if ((addr_inv ^ addr) != 0x1fff) + return -EINVAL; + + /* Normal Sanyo */ + request->protocol = RC_TYPE_SANYO; + request->scancode = addr << 8 | data; + return IMG_IR_SCANCODE; +} + +/* Convert Sanyo scancode to Sanyo data filter */ +static int img_ir_sanyo_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + unsigned int addr, addr_inv, data, data_inv; + unsigned int addr_m, data_m; + + data = in->data & 0xff; + data_m = in->mask & 0xff; + data_inv = data ^ 0xff; + + if (in->data & 0xff700000) + return -EINVAL; + + addr = (in->data >> 8) & 0x1fff; + addr_m = (in->mask >> 8) & 0x1fff; + addr_inv = addr ^ 0x1fff; + + out->data = (u64)data_inv << 34 | + (u64)data << 26 | + addr_inv << 13 | + addr; + out->mask = (u64)data_m << 34 | + (u64)data_m << 26 | + addr_m << 13 | + addr_m; + return 0; +} + +/* Sanyo decoder */ +struct img_ir_decoder img_ir_sanyo = { + .type = RC_BIT_SANYO, + .control = { + .decoden = 1, + .code_type = IMG_IR_CODETYPE_PULSEDIST, + }, + /* main timings */ + .unit = 562500, /* 562.5 us */ + .timings = { + /* leader symbol */ + .ldr = { + .pulse = { 16 /* 9ms */ }, + .space = { 8 /* 4.5ms */ }, + }, + /* 0 symbol */ + .s00 = { + .pulse = { 1 /* 562.5 us */ }, + .space = { 1 /* 562.5 us */ }, + }, + /* 1 symbol */ + .s01 = { + .pulse = { 1 /* 562.5 us */ }, + .space = { 3 /* 1687.5 us */ }, + }, + /* free time */ + .ft = { + .minlen = 42, + .maxlen = 42, + .ft_min = 10, /* 5.625 ms */ + }, + }, + /* repeat codes */ + .repeat = 108, /* 108 ms */ + .rtimings = { + /* leader symbol */ + .ldr = { + .space = { 4 /* 2.25 ms */ }, + }, + /* free time */ + .ft = { + .minlen = 0, /* repeat code has no data */ + .maxlen = 0, + }, + }, + /* scancode logic */ + .scancode = img_ir_sanyo_scancode, + .filter = img_ir_sanyo_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-sharp.c b/kernel/drivers/media/rc/img-ir/img-ir-sharp.c new file mode 100644 index 000000000..fe5acc4f0 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-sharp.c @@ -0,0 +1,106 @@ +/* + * ImgTec IR Decoder setup for Sharp protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" + +/* Convert Sharp data to a scancode */ +static int img_ir_sharp_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int addr, cmd, exp, chk; + + if (len != 15) + return -EINVAL; + + addr = (raw >> 0) & 0x1f; + cmd = (raw >> 5) & 0xff; + exp = (raw >> 13) & 0x1; + chk = (raw >> 14) & 0x1; + + /* validate data */ + if (!exp) + return -EINVAL; + if (chk) + /* probably the second half of the message */ + return -EINVAL; + + request->protocol = RC_TYPE_SHARP; + request->scancode = addr << 8 | cmd; + return IMG_IR_SCANCODE; +} + +/* Convert Sharp scancode to Sharp data filter */ +static int img_ir_sharp_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + unsigned int addr, cmd, exp = 0, chk = 0; + unsigned int addr_m, cmd_m, exp_m = 0, chk_m = 0; + + addr = (in->data >> 8) & 0x1f; + addr_m = (in->mask >> 8) & 0x1f; + cmd = (in->data >> 0) & 0xff; + cmd_m = (in->mask >> 0) & 0xff; + if (cmd_m) { + /* if filtering commands, we can only match the first part */ + exp = 1; + exp_m = 1; + chk = 0; + chk_m = 1; + } + + out->data = addr | + cmd << 5 | + exp << 13 | + chk << 14; + out->mask = addr_m | + cmd_m << 5 | + exp_m << 13 | + chk_m << 14; + + return 0; +} + +/* + * Sharp decoder + * See also http://www.sbprojects.com/knowledge/ir/sharp.php + */ +struct img_ir_decoder img_ir_sharp = { + .type = RC_BIT_SHARP, + .control = { + .decoden = 0, + .decodend2 = 1, + .code_type = IMG_IR_CODETYPE_PULSEDIST, + .d1validsel = 1, + }, + /* main timings */ + .tolerance = 20, /* 20% */ + .timings = { + /* 0 symbol */ + .s10 = { + .pulse = { 320 /* 320 us */ }, + .space = { 680 /* 1 ms period */ }, + }, + /* 1 symbol */ + .s11 = { + .pulse = { 320 /* 320 us */ }, + .space = { 1680 /* 2 ms period */ }, + }, + /* free time */ + .ft = { + .minlen = 15, + .maxlen = 15, + .ft_min = 5000, /* 5 ms */ + }, + }, + /* scancode logic */ + .scancode = img_ir_sharp_scancode, + .filter = img_ir_sharp_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir-sony.c b/kernel/drivers/media/rc/img-ir/img-ir-sony.c new file mode 100644 index 000000000..7f7375f82 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir-sony.c @@ -0,0 +1,154 @@ +/* + * ImgTec IR Decoder setup for Sony (SIRC) protocol. + * + * Copyright 2012-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "img-ir-hw.h" + +/* Convert Sony data to a scancode */ +static int img_ir_sony_scancode(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request) +{ + unsigned int dev, subdev, func; + + switch (len) { + case 12: + if (!(enabled_protocols & RC_BIT_SONY12)) + return -EINVAL; + func = raw & 0x7f; /* first 7 bits */ + raw >>= 7; + dev = raw & 0x1f; /* next 5 bits */ + subdev = 0; + request->protocol = RC_TYPE_SONY12; + break; + case 15: + if (!(enabled_protocols & RC_BIT_SONY15)) + return -EINVAL; + func = raw & 0x7f; /* first 7 bits */ + raw >>= 7; + dev = raw & 0xff; /* next 8 bits */ + subdev = 0; + request->protocol = RC_TYPE_SONY15; + break; + case 20: + if (!(enabled_protocols & RC_BIT_SONY20)) + return -EINVAL; + func = raw & 0x7f; /* first 7 bits */ + raw >>= 7; + dev = raw & 0x1f; /* next 5 bits */ + raw >>= 5; + subdev = raw & 0xff; /* next 8 bits */ + request->protocol = RC_TYPE_SONY20; + break; + default: + return -EINVAL; + } + request->scancode = dev << 16 | subdev << 8 | func; + return IMG_IR_SCANCODE; +} + +/* Convert NEC scancode to NEC data filter */ +static int img_ir_sony_filter(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols) +{ + unsigned int dev, subdev, func; + unsigned int dev_m, subdev_m, func_m; + unsigned int len = 0; + + dev = (in->data >> 16) & 0xff; + dev_m = (in->mask >> 16) & 0xff; + subdev = (in->data >> 8) & 0xff; + subdev_m = (in->mask >> 8) & 0xff; + func = (in->data >> 0) & 0x7f; + func_m = (in->mask >> 0) & 0x7f; + + if (subdev & subdev_m) { + /* can't encode subdev and higher device bits */ + if (dev & dev_m & 0xe0) + return -EINVAL; + /* subdevice (extended) bits only in 20 bit encoding */ + if (!(protocols & RC_BIT_SONY20)) + return -EINVAL; + len = 20; + dev_m &= 0x1f; + } else if (dev & dev_m & 0xe0) { + /* upper device bits only in 15 bit encoding */ + if (!(protocols & RC_BIT_SONY15)) + return -EINVAL; + len = 15; + subdev_m = 0; + } else { + /* + * The hardware mask cannot distinguish high device bits and low + * extended bits, so logically AND those bits of the masks + * together. + */ + subdev_m &= (dev_m >> 5) | 0xf8; + dev_m &= 0x1f; + } + + /* ensure there aren't any bits straying between fields */ + dev &= dev_m; + subdev &= subdev_m; + + /* write the hardware filter */ + out->data = func | + dev << 7 | + subdev << 15; + out->mask = func_m | + dev_m << 7 | + subdev_m << 15; + + if (len) { + out->minlen = len; + out->maxlen = len; + } + return 0; +} + +/* + * Sony SIRC decoder + * See also http://www.sbprojects.com/knowledge/ir/sirc.php + * http://picprojects.org.uk/projects/sirc/sonysirc.pdf + */ +struct img_ir_decoder img_ir_sony = { + .type = RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20, + .control = { + .decoden = 1, + .code_type = IMG_IR_CODETYPE_PULSELEN, + }, + /* main timings */ + .unit = 600000, /* 600 us */ + .timings = { + /* leader symbol */ + .ldr = { + .pulse = { 4 /* 2.4 ms */ }, + .space = { 1 /* 600 us */ }, + }, + /* 0 symbol */ + .s00 = { + .pulse = { 1 /* 600 us */ }, + .space = { 1 /* 600 us */ }, + }, + /* 1 symbol */ + .s01 = { + .pulse = { 2 /* 1.2 ms */ }, + .space = { 1 /* 600 us */ }, + }, + /* free time */ + .ft = { + .minlen = 12, + .maxlen = 20, + .ft_min = 10, /* 6 ms */ + }, + }, + /* scancode logic */ + .scancode = img_ir_sony_scancode, + .filter = img_ir_sony_filter, +}; diff --git a/kernel/drivers/media/rc/img-ir/img-ir.h b/kernel/drivers/media/rc/img-ir/img-ir.h new file mode 100644 index 000000000..f1387c016 --- /dev/null +++ b/kernel/drivers/media/rc/img-ir/img-ir.h @@ -0,0 +1,173 @@ +/* + * ImgTec IR Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IMG_IR_H_ +#define _IMG_IR_H_ + +#include +#include + +#include "img-ir-raw.h" +#include "img-ir-hw.h" + +/* registers */ + +/* relative to the start of the IR block of registers */ +#define IMG_IR_CONTROL 0x00 +#define IMG_IR_STATUS 0x04 +#define IMG_IR_DATA_LW 0x08 +#define IMG_IR_DATA_UP 0x0c +#define IMG_IR_LEAD_SYMB_TIMING 0x10 +#define IMG_IR_S00_SYMB_TIMING 0x14 +#define IMG_IR_S01_SYMB_TIMING 0x18 +#define IMG_IR_S10_SYMB_TIMING 0x1c +#define IMG_IR_S11_SYMB_TIMING 0x20 +#define IMG_IR_FREE_SYMB_TIMING 0x24 +#define IMG_IR_POW_MOD_PARAMS 0x28 +#define IMG_IR_POW_MOD_ENABLE 0x2c +#define IMG_IR_IRQ_MSG_DATA_LW 0x30 +#define IMG_IR_IRQ_MSG_DATA_UP 0x34 +#define IMG_IR_IRQ_MSG_MASK_LW 0x38 +#define IMG_IR_IRQ_MSG_MASK_UP 0x3c +#define IMG_IR_IRQ_ENABLE 0x40 +#define IMG_IR_IRQ_STATUS 0x44 +#define IMG_IR_IRQ_CLEAR 0x48 +#define IMG_IR_IRCORE_ID 0xf0 +#define IMG_IR_CORE_REV 0xf4 +#define IMG_IR_CORE_DES1 0xf8 +#define IMG_IR_CORE_DES2 0xfc + + +/* field masks */ + +/* IMG_IR_CONTROL */ +#define IMG_IR_DECODEN 0x40000000 +#define IMG_IR_CODETYPE 0x30000000 +#define IMG_IR_CODETYPE_SHIFT 28 +#define IMG_IR_HDRTOG 0x08000000 +#define IMG_IR_LDRDEC 0x04000000 +#define IMG_IR_DECODINPOL 0x02000000 /* active high */ +#define IMG_IR_BITORIEN 0x01000000 /* MSB first */ +#define IMG_IR_D1VALIDSEL 0x00008000 +#define IMG_IR_BITINV 0x00000040 /* don't invert */ +#define IMG_IR_DECODEND2 0x00000010 +#define IMG_IR_BITORIEND2 0x00000002 /* MSB first */ +#define IMG_IR_BITINVD2 0x00000001 /* don't invert */ + +/* IMG_IR_STATUS */ +#define IMG_IR_RXDVALD2 0x00001000 +#define IMG_IR_IRRXD 0x00000400 +#define IMG_IR_TOGSTATE 0x00000200 +#define IMG_IR_RXDVAL 0x00000040 +#define IMG_IR_RXDLEN 0x0000003f +#define IMG_IR_RXDLEN_SHIFT 0 + +/* IMG_IR_LEAD_SYMB_TIMING, IMG_IR_Sxx_SYMB_TIMING */ +#define IMG_IR_PD_MAX 0xff000000 +#define IMG_IR_PD_MAX_SHIFT 24 +#define IMG_IR_PD_MIN 0x00ff0000 +#define IMG_IR_PD_MIN_SHIFT 16 +#define IMG_IR_W_MAX 0x0000ff00 +#define IMG_IR_W_MAX_SHIFT 8 +#define IMG_IR_W_MIN 0x000000ff +#define IMG_IR_W_MIN_SHIFT 0 + +/* IMG_IR_FREE_SYMB_TIMING */ +#define IMG_IR_MAXLEN 0x0007e000 +#define IMG_IR_MAXLEN_SHIFT 13 +#define IMG_IR_MINLEN 0x00001f00 +#define IMG_IR_MINLEN_SHIFT 8 +#define IMG_IR_FT_MIN 0x000000ff +#define IMG_IR_FT_MIN_SHIFT 0 + +/* IMG_IR_POW_MOD_PARAMS */ +#define IMG_IR_PERIOD_LEN 0x3f000000 +#define IMG_IR_PERIOD_LEN_SHIFT 24 +#define IMG_IR_PERIOD_DUTY 0x003f0000 +#define IMG_IR_PERIOD_DUTY_SHIFT 16 +#define IMG_IR_STABLE_STOP 0x00003f00 +#define IMG_IR_STABLE_STOP_SHIFT 8 +#define IMG_IR_STABLE_START 0x0000003f +#define IMG_IR_STABLE_START_SHIFT 0 + +/* IMG_IR_POW_MOD_ENABLE */ +#define IMG_IR_POWER_OUT_EN 0x00000002 +#define IMG_IR_POWER_MOD_EN 0x00000001 + +/* IMG_IR_IRQ_ENABLE, IMG_IR_IRQ_STATUS, IMG_IR_IRQ_CLEAR */ +#define IMG_IR_IRQ_DEC2_ERR 0x00000080 +#define IMG_IR_IRQ_DEC_ERR 0x00000040 +#define IMG_IR_IRQ_ACT_LEVEL 0x00000020 +#define IMG_IR_IRQ_FALL_EDGE 0x00000010 +#define IMG_IR_IRQ_RISE_EDGE 0x00000008 +#define IMG_IR_IRQ_DATA_MATCH 0x00000004 +#define IMG_IR_IRQ_DATA2_VALID 0x00000002 +#define IMG_IR_IRQ_DATA_VALID 0x00000001 +#define IMG_IR_IRQ_ALL 0x000000ff +#define IMG_IR_IRQ_EDGE (IMG_IR_IRQ_FALL_EDGE | IMG_IR_IRQ_RISE_EDGE) + +/* IMG_IR_CORE_ID */ +#define IMG_IR_CORE_ID 0x00ff0000 +#define IMG_IR_CORE_ID_SHIFT 16 +#define IMG_IR_CORE_CONFIG 0x0000ffff +#define IMG_IR_CORE_CONFIG_SHIFT 0 + +/* IMG_IR_CORE_REV */ +#define IMG_IR_DESIGNER 0xff000000 +#define IMG_IR_DESIGNER_SHIFT 24 +#define IMG_IR_MAJOR_REV 0x00ff0000 +#define IMG_IR_MAJOR_REV_SHIFT 16 +#define IMG_IR_MINOR_REV 0x0000ff00 +#define IMG_IR_MINOR_REV_SHIFT 8 +#define IMG_IR_MAINT_REV 0x000000ff +#define IMG_IR_MAINT_REV_SHIFT 0 + +struct device; +struct clk; + +/** + * struct img_ir_priv - Private driver data. + * @dev: Platform device. + * @irq: IRQ number. + * @clk: Input clock. + * @sys_clk: System clock. + * @reg_base: Iomem base address of IR register block. + * @lock: Protects IR registers and variables in this struct. + * @raw: Driver data for raw decoder. + * @hw: Driver data for hardware decoder. + */ +struct img_ir_priv { + struct device *dev; + int irq; + struct clk *clk; + struct clk *sys_clk; + void __iomem *reg_base; + spinlock_t lock; + + struct img_ir_priv_raw raw; + struct img_ir_priv_hw hw; +}; + +/* Hardware access */ + +static inline void img_ir_write(struct img_ir_priv *priv, + unsigned int reg_offs, unsigned int data) +{ + iowrite32(data, priv->reg_base + reg_offs); +} + +static inline unsigned int img_ir_read(struct img_ir_priv *priv, + unsigned int reg_offs) +{ + return ioread32(priv->reg_base + reg_offs); +} + +#endif /* _IMG_IR_H_ */ -- cgit 1.2.3-korg