From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/ide/icside.c | 691 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 691 insertions(+) create mode 100644 kernel/drivers/ide/icside.c (limited to 'kernel/drivers/ide/icside.c') diff --git a/kernel/drivers/ide/icside.c b/kernel/drivers/ide/icside.c new file mode 100644 index 000000000..9f0a48e39 --- /dev/null +++ b/kernel/drivers/ide/icside.c @@ -0,0 +1,691 @@ +/* + * Copyright (c) 1996-2004 Russell King. + * + * Please note that this platform does not support 32-bit IDE IO. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "icside" + +#define ICS_IDENT_OFFSET 0x2280 + +#define ICS_ARCIN_V5_INTRSTAT 0x0000 +#define ICS_ARCIN_V5_INTROFFSET 0x0004 +#define ICS_ARCIN_V5_IDEOFFSET 0x2800 +#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80 +#define ICS_ARCIN_V5_IDESTEPPING 6 + +#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000 +#define ICS_ARCIN_V6_INTROFFSET_1 0x2200 +#define ICS_ARCIN_V6_INTRSTAT_1 0x2290 +#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380 +#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000 +#define ICS_ARCIN_V6_INTROFFSET_2 0x3200 +#define ICS_ARCIN_V6_INTRSTAT_2 0x3290 +#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380 +#define ICS_ARCIN_V6_IDESTEPPING 6 + +struct cardinfo { + unsigned int dataoffset; + unsigned int ctrloffset; + unsigned int stepping; +}; + +static struct cardinfo icside_cardinfo_v5 = { + .dataoffset = ICS_ARCIN_V5_IDEOFFSET, + .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET, + .stepping = ICS_ARCIN_V5_IDESTEPPING, +}; + +static struct cardinfo icside_cardinfo_v6_1 = { + .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1, + .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1, + .stepping = ICS_ARCIN_V6_IDESTEPPING, +}; + +static struct cardinfo icside_cardinfo_v6_2 = { + .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2, + .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2, + .stepping = ICS_ARCIN_V6_IDESTEPPING, +}; + +struct icside_state { + unsigned int channel; + unsigned int enabled; + void __iomem *irq_port; + void __iomem *ioc_base; + unsigned int sel; + unsigned int type; + struct ide_host *host; +}; + +#define ICS_TYPE_A3IN 0 +#define ICS_TYPE_A3USER 1 +#define ICS_TYPE_V6 3 +#define ICS_TYPE_V5 15 +#define ICS_TYPE_NOTYPE ((unsigned int)-1) + +/* ---------------- Version 5 PCB Support Functions --------------------- */ +/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +static const expansioncard_ops_t icside_ops_arcin_v5 = { + .irqenable = icside_irqenable_arcin_v5, + .irqdisable = icside_irqdisable_arcin_v5, +}; + + +/* ---------------- Version 6 PCB Support Functions --------------------- */ +/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + void __iomem *base = state->irq_port; + + state->enabled = 1; + + switch (state->channel) { + case 0: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + readb(base + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); + readb(base + ICS_ARCIN_V6_INTROFFSET_1); + break; + } +} + +/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + state->enabled = 0; + + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); +} + +/* Prototype: icside_irqprobe(struct expansion_card *ec) + * Purpose : detect an active interrupt from card + */ +static int icside_irqpending_arcin_v6(struct expansion_card *ec) +{ + struct icside_state *state = ec->irq_data; + + return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || + readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; +} + +static const expansioncard_ops_t icside_ops_arcin_v6 = { + .irqenable = icside_irqenable_arcin_v6, + .irqdisable = icside_irqdisable_arcin_v6, + .irqpending = icside_irqpending_arcin_v6, +}; + +/* + * Handle routing of interrupts. This is called before + * we write the command to the drive. + */ +static void icside_maskproc(ide_drive_t *drive, int mask) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); + unsigned long flags; + + local_irq_save(flags); + + state->channel = hwif->channel; + + if (state->enabled && !mask) { + switch (hwif->channel) { + case 0: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + break; + } + } else { + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + } + + local_irq_restore(flags); +} + +static const struct ide_port_ops icside_v6_no_dma_port_ops = { + .maskproc = icside_maskproc, +}; + +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS +/* + * SG-DMA support. + * + * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. + * There is only one DMA controller per card, which means that only + * one drive can be accessed at one time. NOTE! We do not enforce that + * here, but we rely on the main IDE driver spotting that both + * interfaces use the same IRQ, which should guarantee this. + */ + +/* + * Configure the IOMD to give the appropriate timings for the transfer + * mode being requested. We take the advice of the ATA standards, and + * calculate the cycle time based on the transfer mode, and the EIDE + * MW DMA specs that the drive provides in the IDENTIFY command. + * + * We have the following IOMD DMA modes to choose from: + * + * Type Active Recovery Cycle + * A 250 (250) 312 (550) 562 (800) + * B 187 250 437 + * C 125 (125) 125 (375) 250 (500) + * D 62 125 187 + * + * (figures in brackets are actual measured timings) + * + * However, we also need to take care of the read/write active and + * recovery timings: + * + * Read Write + * Mode Active -- Recovery -- Cycle IOMD type + * MW0 215 50 215 480 A + * MW1 80 50 50 150 C + * MW2 70 25 25 120 C + */ +static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + unsigned long cycle_time = 0; + int use_dma_info = 0; + const u8 xfer_mode = drive->dma_mode; + + switch (xfer_mode) { + case XFER_MW_DMA_2: + cycle_time = 250; + use_dma_info = 1; + break; + + case XFER_MW_DMA_1: + cycle_time = 250; + use_dma_info = 1; + break; + + case XFER_MW_DMA_0: + cycle_time = 480; + break; + + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + cycle_time = 480; + break; + } + + /* + * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should + * take care to note the values in the ID... + */ + if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time) + cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME]; + + ide_set_drivedata(drive, (void *)cycle_time); + + printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n", + drive->name, ide_xfer_verbose(xfer_mode), + 2000 / (cycle_time ? cycle_time : (unsigned long) -1)); +} + +static const struct ide_port_ops icside_v6_port_ops = { + .set_dma_mode = icside_set_dma_mode, + .maskproc = icside_maskproc, +}; + +static void icside_dma_host_set(ide_drive_t *drive, int on) +{ +} + +static int icside_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + + disable_dma(ec->dma); + + return get_dma_residue(ec->dma) != 0; +} + +static void icside_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + + /* We can not enable DMA on both channels simultaneously. */ + BUG_ON(dma_channel_active(ec->dma)); + enable_dma(ec->dma); +} + +static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); + unsigned int dma_mode; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + dma_mode = DMA_MODE_WRITE; + else + dma_mode = DMA_MODE_READ; + + /* + * We can not enable DMA on both channels. + */ + BUG_ON(dma_channel_active(ec->dma)); + + /* + * Ensure that we have the right interrupt routed. + */ + icside_maskproc(drive, 0); + + /* + * Route the DMA signals to the correct interface. + */ + writeb(state->sel | hwif->channel, state->ioc_base); + + /* + * Select the correct timing for this drive. + */ + set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive)); + + /* + * Tell the DMA engine about the SG table and + * data direction. + */ + set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents); + set_dma_mode(ec->dma, dma_mode); + + return 0; +} + +static int icside_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); + + return readb(state->irq_port + + (hwif->channel ? + ICS_ARCIN_V6_INTRSTAT_2 : + ICS_ARCIN_V6_INTRSTAT_1)) & 1; +} + +static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + hwif->dmatable_cpu = NULL; + hwif->dmatable_dma = 0; + + return 0; +} + +static const struct ide_dma_ops icside_v6_dma_ops = { + .dma_host_set = icside_dma_host_set, + .dma_setup = icside_dma_setup, + .dma_start = icside_dma_start, + .dma_end = icside_dma_end, + .dma_test_irq = icside_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, +}; +#endif + +static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} + +static void icside_setup_ports(struct ide_hw *hw, void __iomem *base, + struct cardinfo *info, struct expansion_card *ec) +{ + unsigned long port = (unsigned long)base + info->dataoffset; + + hw->io_ports.data_addr = port; + hw->io_ports.error_addr = port + (1 << info->stepping); + hw->io_ports.nsect_addr = port + (2 << info->stepping); + hw->io_ports.lbal_addr = port + (3 << info->stepping); + hw->io_ports.lbam_addr = port + (4 << info->stepping); + hw->io_ports.lbah_addr = port + (5 << info->stepping); + hw->io_ports.device_addr = port + (6 << info->stepping); + hw->io_ports.status_addr = port + (7 << info->stepping); + hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; + + hw->irq = ec->irq; + hw->dev = &ec->dev; +} + +static const struct ide_port_info icside_v5_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, + .chipset = ide_acorn, +}; + +static int icside_register_v5(struct icside_state *state, + struct expansion_card *ec) +{ + void __iomem *base; + struct ide_host *host; + struct ide_hw hw, *hws[] = { &hw }; + int ret; + + base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); + if (!base) + return -ENOMEM; + + state->irq_port = base; + + ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; + ec->irqmask = 1; + + ecard_setirq(ec, &icside_ops_arcin_v5, state); + + /* + * Be on the safe side - disable interrupts + */ + icside_irqdisable_arcin_v5(ec, 0); + + icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); + + host = ide_host_alloc(&icside_v5_port_info, hws, 1); + if (host == NULL) + return -ENODEV; + + state->host = host; + + ecard_set_drvdata(ec, state); + + ret = ide_host_register(host, &icside_v5_port_info, hws); + if (ret) + goto err_free; + + return 0; +err_free: + ide_host_free(host); + ecard_set_drvdata(ec, NULL); + return ret; +} + +static const struct ide_port_info icside_v6_port_info __initconst = { + .init_dma = icside_dma_off_init, + .port_ops = &icside_v6_no_dma_port_ops, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, + .mwdma_mask = ATA_MWDMA2, + .swdma_mask = ATA_SWDMA2, + .chipset = ide_acorn, +}; + +static int icside_register_v6(struct icside_state *state, + struct expansion_card *ec) +{ + void __iomem *ioc_base, *easi_base; + struct ide_host *host; + unsigned int sel = 0; + int ret; + struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] }; + struct ide_port_info d = icside_v6_port_info; + + ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); + if (!ioc_base) { + ret = -ENOMEM; + goto out; + } + + easi_base = ioc_base; + + if (ecard_resource_flags(ec, ECARD_RES_EASI)) { + easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0); + if (!easi_base) { + ret = -ENOMEM; + goto out; + } + + /* + * Enable access to the EASI region. + */ + sel = 1 << 5; + } + + writeb(sel, ioc_base); + + ecard_setirq(ec, &icside_ops_arcin_v6, state); + + state->irq_port = easi_base; + state->ioc_base = ioc_base; + state->sel = sel; + + /* + * Be on the safe side - disable interrupts + */ + icside_irqdisable_arcin_v6(ec, 0); + + icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); + icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); + + host = ide_host_alloc(&d, hws, 2); + if (host == NULL) + return -ENODEV; + + state->host = host; + + ecard_set_drvdata(ec, state); + +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS + if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { + d.init_dma = icside_dma_init; + d.port_ops = &icside_v6_port_ops; + d.dma_ops = &icside_v6_dma_ops; + } +#endif + + ret = ide_host_register(host, &d, hws); + if (ret) + goto err_free; + + return 0; +err_free: + ide_host_free(host); + if (d.dma_ops) + free_dma(ec->dma); + ecard_set_drvdata(ec, NULL); +out: + return ret; +} + +static int icside_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct icside_state *state; + void __iomem *idmem; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + state = kzalloc(sizeof(struct icside_state), GFP_KERNEL); + if (!state) { + ret = -ENOMEM; + goto release; + } + + state->type = ICS_TYPE_NOTYPE; + + idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); + if (idmem) { + unsigned int type; + + type = readb(idmem + ICS_IDENT_OFFSET) & 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; + type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; + ecardm_iounmap(ec, idmem); + + state->type = type; + } + + switch (state->type) { + case ICS_TYPE_A3IN: + dev_warn(&ec->dev, "A3IN unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_A3USER: + dev_warn(&ec->dev, "A3USER unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_V5: + ret = icside_register_v5(state, ec); + break; + + case ICS_TYPE_V6: + ret = icside_register_v6(state, ec); + break; + + default: + dev_warn(&ec->dev, "unknown interface type\n"); + ret = -ENODEV; + break; + } + + if (ret == 0) + goto out; + + kfree(state); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void icside_remove(struct expansion_card *ec) +{ + struct icside_state *state = ecard_get_drvdata(ec); + + switch (state->type) { + case ICS_TYPE_V5: + /* FIXME: tell IDE to stop using the interface */ + + /* Disable interrupts */ + icside_irqdisable_arcin_v5(ec, 0); + break; + + case ICS_TYPE_V6: + /* FIXME: tell IDE to stop using the interface */ + if (ec->dma != NO_DMA) + free_dma(ec->dma); + + /* Disable interrupts */ + icside_irqdisable_arcin_v6(ec, 0); + + /* Reset the ROM pointer/EASI selection */ + writeb(0, state->ioc_base); + break; + } + + ecard_set_drvdata(ec, NULL); + + kfree(state); + ecard_release_resources(ec); +} + +static void icside_shutdown(struct expansion_card *ec) +{ + struct icside_state *state = ecard_get_drvdata(ec); + unsigned long flags; + + /* + * Disable interrupts from this card. We need to do + * this before disabling EASI since we may be accessing + * this register via that region. + */ + local_irq_save(flags); + ec->ops->irqdisable(ec, 0); + local_irq_restore(flags); + + /* + * Reset the ROM pointer so that we can read the ROM + * after a soft reboot. This also disables access to + * the IDE taskfile via the EASI region. + */ + if (state->ioc_base) + writeb(0, state->ioc_base); +} + +static const struct ecard_id icside_ids[] = { + { MANU_ICS, PROD_ICS_IDE }, + { MANU_ICS2, PROD_ICS2_IDE }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver icside_driver = { + .probe = icside_probe, + .remove = icside_remove, + .shutdown = icside_shutdown, + .id_table = icside_ids, + .drv = { + .name = "icside", + }, +}; + +static int __init icside_init(void) +{ + return ecard_register_driver(&icside_driver); +} + +static void __exit icside_exit(void) +{ + ecard_remove_driver(&icside_driver); +} + +MODULE_AUTHOR("Russell King "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ICS IDE driver"); + +module_init(icside_init); +module_exit(icside_exit); -- cgit 1.2.3-korg