From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/extcon/Kconfig | 113 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 kernel/drivers/extcon/Kconfig (limited to 'kernel/drivers/extcon/Kconfig') diff --git a/kernel/drivers/extcon/Kconfig b/kernel/drivers/extcon/Kconfig new file mode 100644 index 000000000..fdc0bf054 --- /dev/null +++ b/kernel/drivers/extcon/Kconfig @@ -0,0 +1,113 @@ +menuconfig EXTCON + tristate "External Connector Class (extcon) support" + help + Say Y here to enable external connector class (extcon) support. + This allows monitoring external connectors by userspace + via sysfs and uevent and supports external connectors with + multiple states; i.e., an extcon that may have multiple + cables attached. For example, an external connector of a device + may be used to connect an HDMI cable and a AC adaptor, and to + host USB ports. Many of 30-pin connectors including PDMI are + also good examples. + +if EXTCON + +comment "Extcon Device Drivers" + +config EXTCON_ADC_JACK + tristate "ADC Jack extcon support" + depends on IIO + help + Say Y here to enable extcon device driver based on ADC values. + +config EXTCON_ARIZONA + tristate "Wolfson Arizona EXTCON support" + depends on MFD_ARIZONA && INPUT && SND_SOC + help + Say Y here to enable support for external accessory detection + with Wolfson Arizona devices. These are audio CODECs with + advanced audio accessory detection support. + +config EXTCON_GPIO + tristate "GPIO extcon support" + depends on GPIOLIB + help + Say Y here to enable GPIO based extcon support. Note that GPIO + extcon supports single state per extcon instance. + +config EXTCON_MAX14577 + tristate "MAX14577/77836 EXTCON Support" + depends on MFD_MAX14577 + select IRQ_DOMAIN + select REGMAP_I2C + help + If you say yes here you get support for the MUIC device of + Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory + detector and switch. + +config EXTCON_MAX77693 + tristate "MAX77693 EXTCON Support" + depends on MFD_MAX77693 && INPUT + select IRQ_DOMAIN + select REGMAP_I2C + help + If you say yes here you get support for the MUIC device of + Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory + detector and switch. + +config EXTCON_MAX77843 + tristate "MAX77843 EXTCON Support" + depends on MFD_MAX77843 + select IRQ_DOMAIN + select REGMAP_I2C + help + If you say yes here you get support for the MUIC device of + Maxim MAX77843. The MAX77843 MUIC is a USB port accessory + detector add switch. + +config EXTCON_MAX8997 + tristate "MAX8997 EXTCON Support" + depends on MFD_MAX8997 && IRQ_DOMAIN + help + If you say yes here you get support for the MUIC device of + Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory + detector and switch. + +config EXTCON_PALMAS + tristate "Palmas USB EXTCON support" + depends on MFD_PALMAS + help + Say Y here to enable support for USB peripheral and USB host + detection by palmas usb. + +config EXTCON_RT8973A + tristate "RT8973A EXTCON support" + depends on I2C + select IRQ_DOMAIN + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the MUIC device of + Richtek RT8973A. The RT8973A is a USB port accessory detector + and switch that is optimized to protect low voltage system + from abnormal high input voltage (up to 28V). + +config EXTCON_SM5502 + tristate "SM5502 EXTCON support" + depends on I2C + select IRQ_DOMAIN + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the MUIC device of + Silicon Mitus SM5502. The SM5502 is a USB port accessory + detector and switch. + +config EXTCON_USB_GPIO + tristate "USB GPIO extcon support" + depends on GPIOLIB + help + Say Y here to enable GPIO based USB cable detection extcon support. + Used typically if GPIO is used for USB ID pin detection. + +endif # MULTISTATE_SWITCH -- cgit 1.2.3-korg