From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/drivers/acpi/acpica/evxfregn.c | 295 ++++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) create mode 100644 kernel/drivers/acpi/acpica/evxfregn.c (limited to 'kernel/drivers/acpi/acpica/evxfregn.c') diff --git a/kernel/drivers/acpi/acpica/evxfregn.c b/kernel/drivers/acpi/acpica/evxfregn.c new file mode 100644 index 000000000..f21afbab0 --- /dev/null +++ b/kernel/drivers/acpi/acpica/evxfregn.c @@ -0,0 +1,295 @@ +/****************************************************************************** + * + * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and + * Address Spaces. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define EXPORT_ACPI_INTERFACES + +#include +#include "accommon.h" +#include "acnamesp.h" +#include "acevents.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evxfregn") + +/******************************************************************************* + * + * FUNCTION: acpi_install_address_space_handler + * + * PARAMETERS: device - Handle for the device + * space_id - The address space ID + * handler - Address of the handler + * setup - Address of the setup function + * context - Value passed to the handler on each access + * + * RETURN: Status + * + * DESCRIPTION: Install a handler for all op_regions of a given space_id. + * + * NOTE: This function should only be called after acpi_enable_subsystem has + * been called. This is because any _REG methods associated with the Space ID + * are executed here, and these methods can only be safely executed after + * the default handlers have been installed and the hardware has been + * initialized (via acpi_enable_subsystem.) + * + ******************************************************************************/ +acpi_status +acpi_install_address_space_handler(acpi_handle device, + acpi_adr_space_type space_id, + acpi_adr_space_handler handler, + acpi_adr_space_setup setup, void *context) +{ + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_address_space_handler); + + /* Parameter validation */ + + if (!device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Convert and validate the device handle */ + + node = acpi_ns_validate_handle(device); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Install the handler for all Regions for this Space ID */ + + status = + acpi_ev_install_space_handler(node, space_id, handler, setup, + context); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + /* + * For the default space_IDs, (the IDs for which there are default region handlers + * installed) Only execute the _REG methods if the global initialization _REG + * methods have already been run (via acpi_initialize_objects). In other words, + * we will defer the execution of the _REG methods for these space_IDs until + * execution of acpi_initialize_objects. This is done because we need the handlers + * for the default spaces (mem/io/pci/table) to be installed before we can run + * any control methods (or _REG methods). There is known BIOS code that depends + * on this. + * + * For all other space_IDs, we can safely execute the _REG methods immediately. + * This means that for IDs like embedded_controller, this function should be called + * only after acpi_enable_subsystem has been called. + */ + switch (space_id) { + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + case ACPI_ADR_SPACE_SYSTEM_IO: + case ACPI_ADR_SPACE_PCI_CONFIG: + case ACPI_ADR_SPACE_DATA_TABLE: + + if (!acpi_gbl_reg_methods_executed) { + + /* We will defer execution of the _REG methods for this space */ + goto unlock_and_exit; + } + break; + + default: + + break; + } + + /* Run all _REG methods for this address space */ + + status = acpi_ev_execute_reg_methods(node, space_id); + +unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_address_space_handler + * + * PARAMETERS: device - Handle for the device + * space_id - The address space ID + * handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Remove a previously installed handler. + * + ******************************************************************************/ +acpi_status +acpi_remove_address_space_handler(acpi_handle device, + acpi_adr_space_type space_id, + acpi_adr_space_handler handler) +{ + union acpi_operand_object *obj_desc; + union acpi_operand_object *handler_obj; + union acpi_operand_object *region_obj; + union acpi_operand_object **last_obj_ptr; + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_remove_address_space_handler); + + /* Parameter validation */ + + if (!device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Convert and validate the device handle */ + + node = acpi_ns_validate_handle(device); + if (!node || + ((node->type != ACPI_TYPE_DEVICE) && + (node->type != ACPI_TYPE_PROCESSOR) && + (node->type != ACPI_TYPE_THERMAL) && + (node != acpi_gbl_root_node))) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Make sure the internal object exists */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + status = AE_NOT_EXIST; + goto unlock_and_exit; + } + + /* Find the address handler the user requested */ + + handler_obj = obj_desc->device.handler; + last_obj_ptr = &obj_desc->device.handler; + while (handler_obj) { + + /* We have a handler, see if user requested this one */ + + if (handler_obj->address_space.space_id == space_id) { + + /* Handler must be the same as the installed handler */ + + if (handler_obj->address_space.handler != handler) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Matched space_id, first dereference this in the Regions */ + + ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, + "Removing address handler %p(%p) for region %s " + "on Device %p(%p)\n", + handler_obj, handler, + acpi_ut_get_region_name(space_id), + node, obj_desc)); + + region_obj = handler_obj->address_space.region_list; + + /* Walk the handler's region list */ + + while (region_obj) { + /* + * First disassociate the handler from the region. + * + * NOTE: this doesn't mean that the region goes away + * The region is just inaccessible as indicated to + * the _REG method + */ + acpi_ev_detach_region(region_obj, TRUE); + + /* + * Walk the list: Just grab the head because the + * detach_region removed the previous head. + */ + region_obj = + handler_obj->address_space.region_list; + + } + + /* Remove this Handler object from the list */ + + *last_obj_ptr = handler_obj->address_space.next; + + /* Now we can delete the handler object */ + + acpi_ut_remove_reference(handler_obj); + goto unlock_and_exit; + } + + /* Walk the linked list of handlers */ + + last_obj_ptr = &handler_obj->address_space.next; + handler_obj = handler_obj->address_space.next; + } + + /* The handler does not exist */ + + ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, + "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", + handler, acpi_ut_get_region_name(space_id), space_id, + node, obj_desc)); + + status = AE_NOT_EXIST; + +unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_address_space_handler) -- cgit 1.2.3-korg