From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/x86/kernel/apic/io_apic.c | 3114 +++++++++++++++++++++++++++++++++ 1 file changed, 3114 insertions(+) create mode 100644 kernel/arch/x86/kernel/apic/io_apic.c (limited to 'kernel/arch/x86/kernel/apic/io_apic.c') diff --git a/kernel/arch/x86/kernel/apic/io_apic.c b/kernel/arch/x86/kernel/apic/io_apic.c new file mode 100644 index 000000000..07c6aba75 --- /dev/null +++ b/kernel/arch/x86/kernel/apic/io_apic.c @@ -0,0 +1,3114 @@ +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku and + * Hidemi Kishimoto , + * further tested and cleaned up by Zach Brown + * and Ingo Molnar + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* time_after() */ +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define for_each_ioapic(idx) \ + for ((idx) = 0; (idx) < nr_ioapics; (idx)++) +#define for_each_ioapic_reverse(idx) \ + for ((idx) = nr_ioapics - 1; (idx) >= 0; (idx)--) +#define for_each_pin(idx, pin) \ + for ((pin) = 0; (pin) < ioapics[(idx)].nr_registers; (pin)++) +#define for_each_ioapic_pin(idx, pin) \ + for_each_ioapic((idx)) \ + for_each_pin((idx), (pin)) + +#define for_each_irq_pin(entry, head) \ + list_for_each_entry(entry, &head, list) + +/* + * Is the SiS APIC rmw bug present ? + * -1 = don't know, 0 = no, 1 = yes + */ +int sis_apic_bug = -1; + +static DEFINE_RAW_SPINLOCK(ioapic_lock); +static DEFINE_MUTEX(ioapic_mutex); +static unsigned int ioapic_dynirq_base; +static int ioapic_initialized; + +struct mp_pin_info { + int trigger; + int polarity; + int node; + int set; + u32 count; +}; + +static struct ioapic { + /* + * # of IRQ routing registers + */ + int nr_registers; + /* + * Saved state during suspend/resume, or while enabling intr-remap. + */ + struct IO_APIC_route_entry *saved_registers; + /* I/O APIC config */ + struct mpc_ioapic mp_config; + /* IO APIC gsi routing info */ + struct mp_ioapic_gsi gsi_config; + struct ioapic_domain_cfg irqdomain_cfg; + struct irq_domain *irqdomain; + struct mp_pin_info *pin_info; + struct resource *iomem_res; +} ioapics[MAX_IO_APICS]; + +#define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver + +int mpc_ioapic_id(int ioapic_idx) +{ + return ioapics[ioapic_idx].mp_config.apicid; +} + +unsigned int mpc_ioapic_addr(int ioapic_idx) +{ + return ioapics[ioapic_idx].mp_config.apicaddr; +} + +struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) +{ + return &ioapics[ioapic_idx].gsi_config; +} + +static inline int mp_ioapic_pin_count(int ioapic) +{ + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); + + return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1; +} + +u32 mp_pin_to_gsi(int ioapic, int pin) +{ + return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin; +} + +/* + * Initialize all legacy IRQs and all pins on the first IOAPIC + * if we have legacy interrupt controller. Kernel boot option "pirq=" + * may rely on non-legacy pins on the first IOAPIC. + */ +static inline int mp_init_irq_at_boot(int ioapic, int irq) +{ + if (!nr_legacy_irqs()) + return 0; + + return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs()); +} + +static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin) +{ + return ioapics[ioapic_idx].pin_info + pin; +} + +static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic) +{ + return ioapics[ioapic].irqdomain; +} + +int nr_ioapics; + +/* The one past the highest gsi number used */ +u32 gsi_top; + +/* MP IRQ source entries */ +struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + +#ifdef CONFIG_EISA +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + +int skip_ioapic_setup; + +/** + * disable_ioapic_support() - disables ioapic support at runtime + */ +void disable_ioapic_support(void) +{ +#ifdef CONFIG_PCI + noioapicquirk = 1; + noioapicreroute = -1; +#endif + skip_ioapic_setup = 1; +} + +static int __init parse_noapic(char *str) +{ + /* disable IO-APIC */ + disable_ioapic_support(); + return 0; +} +early_param("noapic", parse_noapic); + +/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ +void mp_save_irq(struct mpc_intsrc *m) +{ + int i; + + apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, + m->srcbusirq, m->dstapic, m->dstirq); + + for (i = 0; i < mp_irq_entries; i++) { + if (!memcmp(&mp_irqs[i], m, sizeof(*m))) + return; + } + + memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +struct irq_pin_list { + struct list_head list; + int apic, pin; +}; + +static struct irq_pin_list *alloc_irq_pin_list(int node) +{ + return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node); +} + +static void alloc_ioapic_saved_registers(int idx) +{ + size_t size; + + if (ioapics[idx].saved_registers) + return; + + size = sizeof(struct IO_APIC_route_entry) * ioapics[idx].nr_registers; + ioapics[idx].saved_registers = kzalloc(size, GFP_KERNEL); + if (!ioapics[idx].saved_registers) + pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); +} + +static void free_ioapic_saved_registers(int idx) +{ + kfree(ioapics[idx].saved_registers); + ioapics[idx].saved_registers = NULL; +} + +int __init arch_early_ioapic_init(void) +{ + struct irq_cfg *cfg; + int i, node = cpu_to_node(0); + + if (!nr_legacy_irqs()) + io_apic_irqs = ~0UL; + + for_each_ioapic(i) + alloc_ioapic_saved_registers(i); + + /* + * For legacy IRQ's, start with assigning irq0 to irq15 to + * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's. + */ + for (i = 0; i < nr_legacy_irqs(); i++) { + cfg = alloc_irq_and_cfg_at(i, node); + cfg->vector = IRQ0_VECTOR + i; + cpumask_setall(cfg->domain); + } + + return 0; +} + +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; + unsigned int unused2[11]; + unsigned int eoi; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mpc_ioapic_addr(idx) & ~PAGE_MASK); +} + +void io_apic_eoi(unsigned int apic, unsigned int vector) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(vector, &io_apic->eoi); +} + +unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + * + * Older SiS APIC requires we rewrite the index register + */ +void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + + if (sis_apic_bug) + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + + return eu.entry; +} + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + eu.entry = __ioapic_read_entry(apic, pin); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return eu.entry; +} + +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ +static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + union entry_union eu = {{0, 0}}; + + eu.entry = e; + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, e); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +{ + struct irq_pin_list *entry; + + /* don't allow duplicates */ + for_each_irq_pin(entry, cfg->irq_2_pin) + if (entry->apic == apic && entry->pin == pin) + return 0; + + entry = alloc_irq_pin_list(node); + if (!entry) { + pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", + node, apic, pin); + return -ENOMEM; + } + entry->apic = apic; + entry->pin = pin; + + list_add_tail(&entry->list, &cfg->irq_2_pin); + return 0; +} + +static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin) +{ + struct irq_pin_list *tmp, *entry; + + list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list) + if (entry->apic == apic && entry->pin == pin) { + list_del(&entry->list); + kfree(entry); + return; + } +} + +static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +{ + if (__add_pin_to_irq_node(cfg, node, apic, pin)) + panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); +} + +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry; + + for_each_irq_pin(entry, cfg->irq_2_pin) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + /* every one is different, right? */ + return; + } + } + + /* old apic/pin didn't exist, so just add new ones */ + add_pin_to_irq_node(cfg, node, newapic, newpin); +} + +static void __io_apic_modify_irq(struct irq_pin_list *entry, + int mask_and, int mask_or, + void (*final)(struct irq_pin_list *entry)) +{ + unsigned int reg, pin; + + pin = entry->pin; + reg = io_apic_read(entry->apic, 0x10 + pin * 2); + reg &= mask_and; + reg |= mask_or; + io_apic_modify(entry->apic, 0x10 + pin * 2, reg); + if (final) + final(entry); +} + +static void io_apic_modify_irq(struct irq_cfg *cfg, + int mask_and, int mask_or, + void (*final)(struct irq_pin_list *entry)) +{ + struct irq_pin_list *entry; + + for_each_irq_pin(entry, cfg->irq_2_pin) + __io_apic_modify_irq(entry, mask_and, mask_or, final); +} + +static void io_apic_sync(struct irq_pin_list *entry) +{ + /* + * Synchronize the IO-APIC and the CPU by doing + * a dummy read from the IO-APIC + */ + struct io_apic __iomem *io_apic; + + io_apic = io_apic_base(entry->apic); + readl(&io_apic->data); +} + +static void mask_ioapic(struct irq_cfg *cfg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void mask_ioapic_irq(struct irq_data *data) +{ + mask_ioapic(irqd_cfg(data)); +} + +static void __unmask_ioapic(struct irq_cfg *cfg) +{ + io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); +} + +static void unmask_ioapic(struct irq_cfg *cfg) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + __unmask_ioapic(cfg); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void unmask_ioapic_irq(struct irq_data *data) +{ + unmask_ioapic(irqd_cfg(data)); +} + +/* + * IO-APIC versions below 0x20 don't support EOI register. + * For the record, here is the information about various versions: + * 0Xh 82489DX + * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant + * 2Xh I/O(x)APIC which is PCI 2.2 Compliant + * 30h-FFh Reserved + * + * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic + * version as 0x2. This is an error with documentation and these ICH chips + * use io-apic's of version 0x20. + * + * For IO-APIC's with EOI register, we use that to do an explicit EOI. + * Otherwise, we simulate the EOI message manually by changing the trigger + * mode to edge and then back to level, with RTE being masked during this. + */ +void native_eoi_ioapic_pin(int apic, int pin, int vector) +{ + if (mpc_ioapic_ver(apic) >= 0x20) { + io_apic_eoi(apic, vector); + } else { + struct IO_APIC_route_entry entry, entry1; + + entry = entry1 = __ioapic_read_entry(apic, pin); + + /* + * Mask the entry and change the trigger mode to edge. + */ + entry1.mask = 1; + entry1.trigger = IOAPIC_EDGE; + + __ioapic_write_entry(apic, pin, entry1); + + /* + * Restore the previous level triggered entry. + */ + __ioapic_write_entry(apic, pin, entry); + } +} + +void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + struct irq_pin_list *entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, cfg->irq_2_pin) + x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin, + cfg->vector); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + entry = ioapic_read_entry(apic, pin); + if (entry.delivery_mode == dest_SMI) + return; + + /* + * Make sure the entry is masked and re-read the contents to check + * if it is a level triggered pin and if the remote-IRR is set. + */ + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + entry = ioapic_read_entry(apic, pin); + } + + if (entry.irr) { + unsigned long flags; + + /* + * Make sure the trigger mode is set to level. Explicit EOI + * doesn't clear the remote-IRR if the trigger mode is not + * set to level. + */ + if (!entry.trigger) { + entry.trigger = IOAPIC_LEVEL; + ioapic_write_entry(apic, pin, entry); + } + + raw_spin_lock_irqsave(&ioapic_lock, flags); + x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + } + + /* + * Clear the rest of the bits in the IO-APIC RTE except for the mask + * bit. + */ + ioapic_mask_entry(apic, pin); + entry = ioapic_read_entry(apic, pin); + if (entry.irr) + pr_err("Unable to reset IRR for apic: %d, pin :%d\n", + mpc_ioapic_id(apic), pin); +} + +static void clear_IO_APIC (void) +{ + int apic, pin; + + for_each_ioapic_pin(apic, pin) + clear_IO_APIC_pin(apic, pin); +} + +#ifdef CONFIG_X86_32 +/* + * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to + * specific CPU-side IRQs. + */ + +#define MAX_PIRQS 8 +static int pirq_entries[MAX_PIRQS] = { + [0 ... MAX_PIRQS - 1] = -1 +}; + +static int __init ioapic_pirq_setup(char *str) +{ + int i, max; + int ints[MAX_PIRQS+1]; + + get_options(str, ARRAY_SIZE(ints), ints); + + apic_printk(APIC_VERBOSE, KERN_INFO + "PIRQ redirection, working around broken MP-BIOS.\n"); + max = MAX_PIRQS; + if (ints[0] < MAX_PIRQS) + max = ints[0]; + + for (i = 0; i < max; i++) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); + /* + * PIRQs are mapped upside down, usually. + */ + pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; + } + return 1; +} + +__setup("pirq=", ioapic_pirq_setup); +#endif /* CONFIG_X86_32 */ + +/* + * Saves all the IO-APIC RTE's + */ +int save_ioapic_entries(void) +{ + int apic, pin; + int err = 0; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) { + err = -ENOMEM; + continue; + } + + for_each_pin(apic, pin) + ioapics[apic].saved_registers[pin] = + ioapic_read_entry(apic, pin); + } + + return err; +} + +/* + * Mask all IO APIC entries. + */ +void mask_ioapic_entries(void) +{ + int apic, pin; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) + continue; + + for_each_pin(apic, pin) { + struct IO_APIC_route_entry entry; + + entry = ioapics[apic].saved_registers[pin]; + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + } + } + } +} + +/* + * Restore IO APIC entries which was saved in the ioapic structure. + */ +int restore_ioapic_entries(void) +{ + int apic, pin; + + for_each_ioapic(apic) { + if (!ioapics[apic].saved_registers) + continue; + + for_each_pin(apic, pin) + ioapic_write_entry(apic, pin, + ioapics[apic].saved_registers[pin]); + } + return 0; +} + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int ioapic_idx, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].irqtype == type && + (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || + mp_irqs[i].dstapic == MP_APIC_ALL) && + mp_irqs[i].dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + + return mp_irqs[i].dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) + break; + } + + if (i < mp_irq_entries) { + int ioapic_idx; + + for_each_ioapic(ioapic_idx) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) + return ioapic_idx; + } + + return -1; +} + +#ifdef CONFIG_EISA +/* + * EISA Edge/Level control register, ELCR + */ +static int EISA_ELCR(unsigned int irq) +{ + if (irq < nr_legacy_irqs()) { + unsigned int port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; + } + apic_printk(APIC_VERBOSE, KERN_INFO + "Broken MPtable reports ISA irq %d\n", irq); + return 0; +} + +#endif + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) + +/* EISA interrupts are always polarity zero and can be edge or level + * trigger depending on the ELCR value. If an interrupt is listed as + * EISA conforming in the MP table, that means its trigger type must + * be read in from the ELCR */ + +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) +#define default_EISA_polarity(idx) default_ISA_polarity(idx) + +/* PCI interrupts are always polarity one level triggered, + * when listed as conforming in the MP table. */ + +#define default_PCI_trigger(idx) (1) +#define default_PCI_polarity(idx) (1) + +static int irq_polarity(int idx) +{ + int bus = mp_irqs[idx].srcbus; + int polarity; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].irqflag & 3) + { + case 0: /* conforms, ie. bus-type dependent polarity */ + if (test_bit(bus, mp_bus_not_pci)) + polarity = default_ISA_polarity(idx); + else + polarity = default_PCI_polarity(idx); + break; + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + pr_warn("broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + pr_warn("broken BIOS!!\n"); + polarity = 1; + break; + } + } + return polarity; +} + +static int irq_trigger(int idx) +{ + int bus = mp_irqs[idx].srcbus; + int trigger; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch ((mp_irqs[idx].irqflag>>2) & 3) + { + case 0: /* conforms, ie. bus-type dependent */ + if (test_bit(bus, mp_bus_not_pci)) + trigger = default_ISA_trigger(idx); + else + trigger = default_PCI_trigger(idx); +#ifdef CONFIG_EISA + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + trigger = default_EISA_trigger(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + /* set before the switch */ + break; + } + default: + { + pr_warn("broken BIOS!!\n"); + trigger = 1; + break; + } + } +#endif + break; + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + pr_warn("broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + pr_warn("broken BIOS!!\n"); + trigger = 0; + break; + } + } + return trigger; +} + +static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin) +{ + int irq = -1; + int ioapic = (int)(long)domain->host_data; + int type = ioapics[ioapic].irqdomain_cfg.type; + + switch (type) { + case IOAPIC_DOMAIN_LEGACY: + /* + * Dynamically allocate IRQ number for non-ISA IRQs in the first 16 + * GSIs on some weird platforms. + */ + if (gsi < nr_legacy_irqs()) + irq = irq_create_mapping(domain, pin); + else if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0) + irq = gsi; + break; + case IOAPIC_DOMAIN_STRICT: + if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0) + irq = gsi; + break; + case IOAPIC_DOMAIN_DYNAMIC: + irq = irq_create_mapping(domain, pin); + break; + default: + WARN(1, "ioapic: unknown irqdomain type %d\n", type); + break; + } + + return irq > 0 ? irq : -1; +} + +static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, + unsigned int flags) +{ + int irq; + struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); + struct mp_pin_info *info = mp_pin_info(ioapic, pin); + + if (!domain) + return -1; + + mutex_lock(&ioapic_mutex); + + /* + * Don't use irqdomain to manage ISA IRQs because there may be + * multiple IOAPIC pins sharing the same ISA IRQ number and + * irqdomain only supports 1:1 mapping between IOAPIC pin and + * IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are used + * for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H). + * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are + * available, and some BIOSes may use MP Interrupt Source records + * to override IRQ numbers for PIRQs instead of reprogramming + * the interrupt routing logic. Thus there may be multiple pins + * sharing the same legacy IRQ number when ACPI is disabled. + */ + if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) { + irq = mp_irqs[idx].srcbusirq; + if (flags & IOAPIC_MAP_ALLOC) { + if (info->count == 0 && + mp_irqdomain_map(domain, irq, pin) != 0) + irq = -1; + + /* special handling for timer IRQ0 */ + if (irq == 0) + info->count++; + } + } else { + irq = irq_find_mapping(domain, pin); + if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC)) + irq = alloc_irq_from_domain(domain, gsi, pin); + } + + if (flags & IOAPIC_MAP_ALLOC) { + /* special handling for legacy IRQs */ + if (irq < nr_legacy_irqs() && info->count == 1 && + mp_irqdomain_map(domain, irq, pin) != 0) + irq = -1; + + if (irq > 0) + info->count++; + else if (info->count == 0) + info->set = 0; + } + + mutex_unlock(&ioapic_mutex); + + return irq > 0 ? irq : -1; +} + +static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) +{ + u32 gsi = mp_pin_to_gsi(ioapic, pin); + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].dstirq != pin) + pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); + +#ifdef CONFIG_X86_32 + /* + * PCI IRQ command line redirection. Yes, limits are hardcoded. + */ + if ((pin >= 16) && (pin <= 23)) { + if (pirq_entries[pin-16] != -1) { + if (!pirq_entries[pin-16]) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "disabling PIRQ%d\n", pin-16); + } else { + int irq = pirq_entries[pin-16]; + apic_printk(APIC_VERBOSE, KERN_DEBUG + "using PIRQ%d -> IRQ %d\n", + pin-16, irq); + return irq; + } + } + } +#endif + + return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags); +} + +int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) +{ + int ioapic, pin, idx; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return -1; + + pin = mp_find_ioapic_pin(ioapic, gsi); + idx = find_irq_entry(ioapic, pin, mp_INT); + if ((flags & IOAPIC_MAP_CHECK) && idx < 0) + return -1; + + return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags); +} + +void mp_unmap_irq(int irq) +{ + struct irq_data *data = irq_get_irq_data(irq); + struct mp_pin_info *info; + int ioapic, pin; + + if (!data || !data->domain) + return; + + ioapic = (int)(long)data->domain->host_data; + pin = (int)data->hwirq; + info = mp_pin_info(ioapic, pin); + + mutex_lock(&ioapic_mutex); + if (--info->count == 0) { + info->set = 0; + if (irq < nr_legacy_irqs() && + ioapics[ioapic].irqdomain_cfg.type == IOAPIC_DOMAIN_LEGACY) + mp_irqdomain_unmap(data->domain, irq); + else + irq_dispose_mapping(irq); + } + mutex_unlock(&ioapic_mutex); +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int irq, i, best_ioapic = -1, best_idx = -1; + + apic_printk(APIC_DEBUG, + "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (test_bit(bus, mp_bus_not_pci)) { + apic_printk(APIC_VERBOSE, + "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + int ioapic_idx, found = 0; + + if (bus != lbus || mp_irqs[i].irqtype != mp_INT || + slot != ((mp_irqs[i].srcbusirq >> 2) & 0x1f)) + continue; + + for_each_ioapic(ioapic_idx) + if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) { + found = 1; + break; + } + if (!found) + continue; + + /* Skip ISA IRQs */ + irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq, 0); + if (irq > 0 && !IO_APIC_IRQ(irq)) + continue; + + if (pin == (mp_irqs[i].srcbusirq & 3)) { + best_idx = i; + best_ioapic = ioapic_idx; + goto out; + } + + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_idx < 0) { + best_idx = i; + best_ioapic = ioapic_idx; + } + } + if (best_idx < 0) + return -1; + +out: + return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq, + IOAPIC_MAP_ALLOC); +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + +static struct irq_chip ioapic_chip; + +#ifdef CONFIG_X86_32 +static inline int IO_APIC_irq_trigger(int irq) +{ + int apic, idx, pin; + + for_each_ioapic_pin(apic, pin) { + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin, 0))) + return irq_trigger(idx); + } + /* + * nonexistent IRQs are edge default + */ + return 0; +} +#else +static inline int IO_APIC_irq_trigger(int irq) +{ + return 1; +} +#endif + +static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, + unsigned long trigger) +{ + struct irq_chip *chip = &ioapic_chip; + irq_flow_handler_t hdl; + bool fasteoi; + + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) { + irq_set_status_flags(irq, IRQ_LEVEL); + fasteoi = true; + } else { + irq_clear_status_flags(irq, IRQ_LEVEL); + fasteoi = false; + } + + if (setup_remapped_irq(irq, cfg, chip)) + fasteoi = trigger != 0; + + hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; + irq_set_chip_and_handler_name(irq, chip, hdl, + fasteoi ? "fasteoi" : "edge"); +} + +int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry, + unsigned int destination, int vector, + struct io_apic_irq_attr *attr) +{ + memset(entry, 0, sizeof(*entry)); + + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->dest = destination; + entry->vector = vector; + entry->mask = 0; /* enable IRQ */ + entry->trigger = attr->trigger; + entry->polarity = attr->polarity; + + /* + * Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (attr->trigger) + entry->mask = 1; + + return 0; +} + +static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, + struct io_apic_irq_attr *attr) +{ + struct IO_APIC_route_entry entry; + unsigned int dest; + + if (!IO_APIC_IRQ(irq)) + return; + + if (assign_irq_vector(irq, cfg, apic->target_cpus())) + return; + + if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(), + &dest)) { + pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n", + mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); + clear_irq_vector(irq, cfg); + + return; + } + + apic_printk(APIC_VERBOSE,KERN_DEBUG + "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " + "IRQ %d Mode:%i Active:%i Dest:%d)\n", + attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin, + cfg->vector, irq, attr->trigger, attr->polarity, dest); + + if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) { + pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); + clear_irq_vector(irq, cfg); + + return; + } + + ioapic_register_intr(irq, cfg, attr->trigger); + if (irq < nr_legacy_irqs()) + legacy_pic->mask(irq); + + ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry); +} + +static void __init setup_IO_APIC_irqs(void) +{ + unsigned int ioapic, pin; + int idx; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for_each_ioapic_pin(ioapic, pin) { + idx = find_irq_entry(ioapic, pin, mp_INT); + if (idx < 0) + apic_printk(APIC_VERBOSE, + KERN_DEBUG " apic %d pin %d not connected\n", + mpc_ioapic_id(ioapic), pin); + else + pin_2_irq(idx, ioapic, pin, + ioapic ? 0 : IOAPIC_MAP_ALLOC); + } +} + +/* + * Set up the timer pin, possibly with the 8259A-master behind. + */ +static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx, + unsigned int pin, int vector) +{ + struct IO_APIC_route_entry entry; + unsigned int dest; + + memset(&entry, 0, sizeof(entry)); + + /* + * We use logical delivery to get the timer IRQ + * to the first CPU. + */ + if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(), + apic->target_cpus(), &dest))) + dest = BAD_APICID; + + entry.dest_mode = apic->irq_dest_mode; + entry.mask = 0; /* don't mask IRQ for edge */ + entry.dest = dest; + entry.delivery_mode = apic->irq_delivery_mode; + entry.polarity = 0; + entry.trigger = 0; + entry.vector = vector; + + /* + * The timer IRQ doesn't have to know that behind the + * scene we may have a 8259A-master in AEOI mode ... + */ + irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, + "edge"); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_idx, pin, entry); +} + +void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries) +{ + int i; + + pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n"); + + for (i = 0; i <= nr_entries; i++) { + struct IO_APIC_route_entry entry; + + entry = ioapic_read_entry(apic, i); + + pr_debug(" %02x %02X ", i, entry.dest); + pr_cont("%1d %1d %1d %1d %1d " + "%1d %1d %02X\n", + entry.mask, + entry.trigger, + entry.irr, + entry.polarity, + entry.delivery_status, + entry.dest_mode, + entry.delivery_mode, + entry.vector); + } +} + +void intel_ir_io_apic_print_entries(unsigned int apic, + unsigned int nr_entries) +{ + int i; + + pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n"); + + for (i = 0; i <= nr_entries; i++) { + struct IR_IO_APIC_route_entry *ir_entry; + struct IO_APIC_route_entry entry; + + entry = ioapic_read_entry(apic, i); + + ir_entry = (struct IR_IO_APIC_route_entry *)&entry; + + pr_debug(" %02x %04X ", i, ir_entry->index); + pr_cont("%1d %1d %1d %1d %1d " + "%1d %1d %X %02X\n", + ir_entry->format, + ir_entry->mask, + ir_entry->trigger, + ir_entry->irr, + ir_entry->polarity, + ir_entry->delivery_status, + ir_entry->index2, + ir_entry->zero, + ir_entry->vector); + } +} + +void ioapic_zap_locks(void) +{ + raw_spin_lock_init(&ioapic_lock); +} + +static void __init print_IO_APIC(int ioapic_idx) +{ + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + union IO_APIC_reg_03 reg_03; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + reg_01.raw = io_apic_read(ioapic_idx, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(ioapic_idx, 2); + if (reg_01.bits.version >= 0x20) + reg_03.raw = io_apic_read(ioapic_idx, 3); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); + printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); + + printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); + printk(KERN_DEBUG "....... : max redirection entries: %02X\n", + reg_01.bits.entries); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %02X\n", + reg_01.bits.version); + + /* + * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, + * but the value of reg_02 is read as the previous read register + * value, so ignore it if reg_02 == reg_01. + */ + if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + } + + /* + * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 + * or reg_03, but the value of reg_0[23] is read as the previous read + * register value, so ignore it if reg_03 == reg_0[12]. + */ + if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && + reg_03.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); + printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + + x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries); +} + +void __init print_IO_APICs(void) +{ + int ioapic_idx; + struct irq_cfg *cfg; + unsigned int irq; + struct irq_chip *chip; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for_each_ioapic(ioapic_idx) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mpc_ioapic_id(ioapic_idx), + ioapics[ioapic_idx].nr_registers); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for_each_ioapic(ioapic_idx) + print_IO_APIC(ioapic_idx); + + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for_each_active_irq(irq) { + struct irq_pin_list *entry; + + chip = irq_get_chip(irq); + if (chip != &ioapic_chip) + continue; + + cfg = irq_cfg(irq); + if (!cfg) + continue; + if (list_empty(&cfg->irq_2_pin)) + continue; + printk(KERN_DEBUG "IRQ%d ", irq); + for_each_irq_pin(entry, cfg->irq_2_pin) + pr_cont("-> %d:%d", entry->apic, entry->pin); + pr_cont("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); +} + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +void __init enable_IO_APIC(void) +{ + int i8259_apic, i8259_pin; + int apic, pin; + + if (skip_ioapic_setup) + nr_ioapics = 0; + + if (!nr_legacy_irqs() || !nr_ioapics) + return; + + for_each_ioapic_pin(apic, pin) { + /* See if any of the pins is in ExtINT mode */ + struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin); + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +void native_disable_io_apic(void) +{ + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + */ + if (ioapic_i8259.pin != -1) { + struct IO_APIC_route_entry entry; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ + entry.vector = 0; + entry.dest = read_apic_id(); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); + } + + if (cpu_has_apic || apic_from_smp_config()) + disconnect_bsp_APIC(ioapic_i8259.pin != -1); + +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ + /* + * Clear the IO-APIC before rebooting: + */ + clear_IO_APIC(); + + if (!nr_legacy_irqs()) + return; + + x86_io_apic_ops.disable(); +} + +#ifdef CONFIG_X86_32 +/* + * function to set the IO-APIC physical IDs based on the + * values stored in the MPC table. + * + * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 + */ +void __init setup_ioapic_ids_from_mpc_nocheck(void) +{ + union IO_APIC_reg_00 reg_00; + physid_mask_t phys_id_present_map; + int ioapic_idx; + int i; + unsigned char old_id; + unsigned long flags; + + /* + * This is broken; anything with a real cpu count has to + * circumvent this idiocy regardless. + */ + apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map); + + /* + * Set the IOAPIC ID to the value stored in the MPC table. + */ + for_each_ioapic(ioapic_idx) { + /* Read the register 0 value */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + old_id = mpc_ioapic_id(ioapic_idx); + + if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", + ioapic_idx, mpc_ioapic_id(ioapic_idx)); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + reg_00.bits.ID); + ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; + } + + /* + * Sanity check, is the ID really free? Every APIC in a + * system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(&phys_id_present_map, + mpc_ioapic_id(ioapic_idx))) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", + ioapic_idx, mpc_ioapic_id(ioapic_idx)); + for (i = 0; i < get_physical_broadcast(); i++) + if (!physid_isset(i, phys_id_present_map)) + break; + if (i >= get_physical_broadcast()) + panic("Max APIC ID exceeded!\n"); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + i); + physid_set(i, phys_id_present_map); + ioapics[ioapic_idx].mp_config.apicid = i; + } else { + physid_mask_t tmp; + apic->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx), + &tmp); + apic_printk(APIC_VERBOSE, "Setting %d in the " + "phys_id_present_map\n", + mpc_ioapic_id(ioapic_idx)); + physids_or(phys_id_present_map, phys_id_present_map, tmp); + } + + /* + * We need to adjust the IRQ routing table + * if the ID changed. + */ + if (old_id != mpc_ioapic_id(ioapic_idx)) + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].dstapic == old_id) + mp_irqs[i].dstapic + = mpc_ioapic_id(ioapic_idx); + + /* + * Update the ID register according to the right value + * from the MPC table if they are different. + */ + if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) + continue; + + apic_printk(APIC_VERBOSE, KERN_INFO + "...changing IO-APIC physical APIC ID to %d ...", + mpc_ioapic_id(ioapic_idx)); + + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic_idx, 0, reg_00.raw); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* + * Sanity check + */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) + pr_cont("could not set ID!\n"); + else + apic_printk(APIC_VERBOSE, " ok.\n"); + } +} + +void __init setup_ioapic_ids_from_mpc(void) +{ + + if (acpi_ioapic) + return; + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + setup_ioapic_ids_from_mpc_nocheck(); +} +#endif + +int no_timer_check __initdata; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + unsigned long flags; + + if (no_timer_check) + return 1; + + local_save_flags(flags); + local_irq_enable(); + /* Let ten ticks pass... */ + mdelay((10 * 1000) / HZ); + local_irq_restore(flags); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + + /* jiffies wrap? */ + if (time_after(jiffies, t1 + 4)) + return 1; + return 0; +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + */ + +static unsigned int startup_ioapic_irq(struct irq_data *data) +{ + int was_pending = 0, irq = data->irq; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + if (irq < nr_legacy_irqs()) { + legacy_pic->mask(irq); + if (legacy_pic->irq_pending(irq)) + was_pending = 1; + } + __unmask_ioapic(irqd_cfg(data)); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +/* + * Level and edge triggered IO-APIC interrupts need different handling, + * so we use two separate IRQ descriptors. Edge triggered IRQs can be + * handled with the level-triggered descriptor, but that one has slightly + * more overhead. Level-triggered interrupts cannot be handled with the + * edge-triggered handler, without risking IRQ storms and other ugly + * races. + */ + +static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + u8 vector = cfg->vector; + + for_each_irq_pin(entry, cfg->irq_2_pin) { + unsigned int reg; + + apic = entry->apic; + pin = entry->pin; + + io_apic_write(apic, 0x11 + pin*2, dest); + reg = io_apic_read(apic, 0x10 + pin*2); + reg &= ~IO_APIC_REDIR_VECTOR_MASK; + reg |= vector; + io_apic_modify(apic, 0x10 + pin*2, reg); + } +} + +int native_ioapic_set_affinity(struct irq_data *data, + const struct cpumask *mask, + bool force) +{ + unsigned int dest, irq = data->irq; + unsigned long flags; + int ret; + + if (!config_enabled(CONFIG_SMP)) + return -EPERM; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + ret = apic_set_affinity(data, mask, &dest); + if (!ret) { + /* Only the high 8 bits are valid. */ + dest = SET_APIC_LOGICAL_ID(dest); + __target_IO_APIC_irq(irq, dest, irqd_cfg(data)); + ret = IRQ_SET_MASK_OK_NOCOPY; + } + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + return ret; +} + +atomic_t irq_mis_count; + +#ifdef CONFIG_GENERIC_PENDING_IRQ +static bool io_apic_level_ack_pending(struct irq_cfg *cfg) +{ + struct irq_pin_list *entry; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + for_each_irq_pin(entry, cfg->irq_2_pin) { + unsigned int reg; + int pin; + + pin = entry->pin; + reg = io_apic_read(entry->apic, 0x10 + pin*2); + /* Is the remote IRR bit set? */ + if (reg & IO_APIC_REDIR_REMOTE_IRR) { + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + return true; + } + } + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return false; +} + +static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) +{ + /* If we are moving the irq we need to mask it */ + if (unlikely(irqd_is_setaffinity_pending(data) && + !irqd_irq_inprogress(data))) { + mask_ioapic(cfg); + return true; + } + return false; +} + +static inline void ioapic_irqd_unmask(struct irq_data *data, + struct irq_cfg *cfg, bool masked) +{ + if (unlikely(masked)) { + /* Only migrate the irq if the ack has been received. + * + * On rare occasions the broadcast level triggered ack gets + * delayed going to ioapics, and if we reprogram the + * vector while Remote IRR is still set the irq will never + * fire again. + * + * To prevent this scenario we read the Remote IRR bit + * of the ioapic. This has two effects. + * - On any sane system the read of the ioapic will + * flush writes (and acks) going to the ioapic from + * this cpu. + * - We get to see if the ACK has actually been delivered. + * + * Based on failed experiments of reprogramming the + * ioapic entry from outside of irq context starting + * with masking the ioapic entry and then polling until + * Remote IRR was clear before reprogramming the + * ioapic I don't trust the Remote IRR bit to be + * completey accurate. + * + * However there appears to be no other way to plug + * this race, so if the Remote IRR bit is not + * accurate and is causing problems then it is a hardware bug + * and you can go talk to the chipset vendor about it. + */ + if (!io_apic_level_ack_pending(cfg)) + irq_move_masked_irq(data); + unmask_ioapic(cfg); + } +} +#else +static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) +{ + return false; +} +static inline void ioapic_irqd_unmask(struct irq_data *data, + struct irq_cfg *cfg, bool masked) +{ +} +#endif + +static void ack_ioapic_level(struct irq_data *data) +{ + struct irq_cfg *cfg = irqd_cfg(data); + int i, irq = data->irq; + unsigned long v; + bool masked; + + irq_complete_move(cfg); + masked = ioapic_irqd_mask(data, cfg); + + /* + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + * + * Also in the case when cpu goes offline, fixup_irqs() will forward + * any unhandled interrupt on the offlined cpu to the new cpu + * destination that is handling the corresponding interrupt. This + * interrupt forwarding is done via IPI's. Hence, in this case also + * level-triggered io-apic interrupt will be seen as an edge + * interrupt in the IRR. And we can't rely on the cpu's EOI + * to be broadcasted to the IO-APIC's which will clear the remoteIRR + * corresponding to the level-triggered interrupt. Hence on IO-APIC's + * supporting EOI register, we do an explicit EOI to clear the + * remote IRR and on IO-APIC's which don't have an EOI register, + * we use the above logic (mask+edge followed by unmask+level) from + * Manfred Spraul to clear the remote IRR. + */ + i = cfg->vector; + v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); + + /* + * We must acknowledge the irq before we move it or the acknowledge will + * not propagate properly. + */ + ack_APIC_irq(); + + /* + * Tail end of clearing remote IRR bit (either by delivering the EOI + * message via io-apic EOI register write or simulating it using + * mask+edge followed by unnask+level logic) manually when the + * level triggered interrupt is seen as the edge triggered interrupt + * at the cpu. + */ + if (!(v & (1 << (i & 0x1f)))) { + atomic_inc(&irq_mis_count); + + eoi_ioapic_irq(irq, cfg); + } + + ioapic_irqd_unmask(data, cfg, masked); +} + +static struct irq_chip ioapic_chip __read_mostly = { + .name = "IO-APIC", + .irq_startup = startup_ioapic_irq, + .irq_mask = mask_ioapic_irq, + .irq_unmask = unmask_ioapic_irq, + .irq_ack = apic_ack_edge, + .irq_eoi = ack_ioapic_level, + .irq_set_affinity = native_ioapic_set_affinity, + .irq_retrigger = apic_retrigger_irq, + .flags = IRQCHIP_SKIP_SET_WAKE, +}; + +static inline void init_IO_APIC_traps(void) +{ + struct irq_cfg *cfg; + unsigned int irq; + + for_each_active_irq(irq) { + cfg = irq_cfg(irq); + if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < nr_legacy_irqs()) + legacy_pic->make_irq(irq); + else + /* Strange. Oh, well.. */ + irq_set_chip(irq, &no_irq_chip); + } + } +} + +/* + * The local APIC irq-chip implementation: + */ + +static void mask_lapic_irq(struct irq_data *data) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void unmask_lapic_irq(struct irq_data *data) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static void ack_lapic_irq(struct irq_data *data) +{ + ack_APIC_irq(); +} + +static struct irq_chip lapic_chip __read_mostly = { + .name = "local-APIC", + .irq_mask = mask_lapic_irq, + .irq_unmask = unmask_lapic_irq, + .irq_ack = ack_lapic_irq, +}; + +static void lapic_register_intr(int irq) +{ + irq_clear_status_flags(irq, IRQ_LEVEL); + irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, + "edge"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void __init unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + + pin = find_isa_irq_pin(8, mp_INT); + if (pin == -1) { + WARN_ON_ONCE(1); + return; + } + apic = find_isa_irq_apic(8, mp_INT); + if (apic == -1) { + WARN_ON_ONCE(1); + return; + } + + entry0 = ioapic_read_entry(apic, pin); + clear_IO_APIC_pin(apic, pin); + + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode = 0; /* physical delivery */ + entry1.mask = 0; /* unmask IRQ now */ + entry1.dest = hard_smp_processor_id(); + entry1.delivery_mode = dest_ExtINT; + entry1.polarity = entry0.polarity; + entry1.trigger = 0; + entry1.vector = 0; + + ioapic_write_entry(apic, pin, entry1); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + ioapic_write_entry(apic, pin, entry0); +} + +static int disable_timer_pin_1 __initdata; +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", disable_timer_pin_setup); + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for all platforms. + */ +static inline void __init check_timer(void) +{ + struct irq_cfg *cfg = irq_cfg(0); + int node = cpu_to_node(0); + int apic1, pin1, apic2, pin2; + unsigned long flags; + int no_pin1 = 0; + + local_irq_save(flags); + + /* + * get/set the timer IRQ vector: + */ + legacy_pic->mask(0); + assign_irq_vector(0, cfg, apic->target_cpus()); + + /* + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. + */ + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + legacy_pic->init(1); + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); + + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC"); + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + if (pin1 != -1) { + /* + * Ok, does IRQ0 through the IOAPIC work? + */ + if (no_pin1) { + add_pin_to_irq_node(cfg, node, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } else { + /* for edge trigger, setup_ioapic_irq already + * leave it unmasked. + * so only need to unmask if it is level-trigger + * do we really have level trigger timer? + */ + int idx; + idx = find_irq_entry(apic1, pin1, mp_INT); + if (idx != -1 && irq_trigger(idx)) + unmask_ioapic(cfg); + } + if (timer_irq_works()) { + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + goto out; + } + panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC"); + local_irq_disable(); + clear_IO_APIC_pin(apic1, pin1); + if (!no_pin1) + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); + + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + legacy_pic->unmask(0); + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); + goto out; + } + /* + * Cleanup, just in case ... + */ + local_irq_disable(); + legacy_pic->mask(0); + clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); + } + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); + + lapic_register_intr(0); + apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ + legacy_pic->unmask(0); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + local_irq_disable(); + legacy_pic->mask(0); + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); + + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); + + legacy_pic->init(0); + legacy_pic->make_irq(0); + apic_write(APIC_LVT0, APIC_DM_EXTINT); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); + goto out; + } + local_irq_disable(); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + if (apic_is_x2apic_enabled()) + apic_printk(APIC_QUIET, KERN_INFO + "Perhaps problem with the pre-enabled x2apic mode\n" + "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option.\n"); +out: + local_irq_restore(flags); +} + +/* + * Traditionally ISA IRQ2 is the cascade IRQ, and is not available + * to devices. However there may be an I/O APIC pin available for + * this interrupt regardless. The pin may be left unconnected, but + * typically it will be reused as an ExtINT cascade interrupt for + * the master 8259A. In the MPS case such a pin will normally be + * reported as an ExtINT interrupt in the MP table. With ACPI + * there is no provision for ExtINT interrupts, and in the absence + * of an override it would be treated as an ordinary ISA I/O APIC + * interrupt, that is edge-triggered and unmasked by default. We + * used to do this, but it caused problems on some systems because + * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using + * the same ExtINT cascade interrupt to drive the local APIC of the + * bootstrap processor. Therefore we refrain from routing IRQ2 to + * the I/O APIC in all cases now. No actual device should request + * it anyway. --macro + */ +#define PIC_IRQS (1UL << PIC_CASCADE_IR) + +static int mp_irqdomain_create(int ioapic) +{ + size_t size; + int hwirqs = mp_ioapic_pin_count(ioapic); + struct ioapic *ip = &ioapics[ioapic]; + struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg; + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); + + size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic); + ip->pin_info = kzalloc(size, GFP_KERNEL); + if (!ip->pin_info) + return -ENOMEM; + + if (cfg->type == IOAPIC_DOMAIN_INVALID) + return 0; + + ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops, + (void *)(long)ioapic); + if(!ip->irqdomain) { + kfree(ip->pin_info); + ip->pin_info = NULL; + return -ENOMEM; + } + + if (cfg->type == IOAPIC_DOMAIN_LEGACY || + cfg->type == IOAPIC_DOMAIN_STRICT) + ioapic_dynirq_base = max(ioapic_dynirq_base, + gsi_cfg->gsi_end + 1); + + if (gsi_cfg->gsi_base == 0) + irq_set_default_host(ip->irqdomain); + + return 0; +} + +static void ioapic_destroy_irqdomain(int idx) +{ + if (ioapics[idx].irqdomain) { + irq_domain_remove(ioapics[idx].irqdomain); + ioapics[idx].irqdomain = NULL; + } + kfree(ioapics[idx].pin_info); + ioapics[idx].pin_info = NULL; +} + +void __init setup_IO_APIC(void) +{ + int ioapic; + + if (skip_ioapic_setup || !nr_ioapics) + return; + + io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; + + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); + for_each_ioapic(ioapic) + BUG_ON(mp_irqdomain_create(ioapic)); + + /* + * Set up IO-APIC IRQ routing. + */ + x86_init.mpparse.setup_ioapic_ids(); + + sync_Arb_IDs(); + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + if (nr_legacy_irqs()) + check_timer(); + + ioapic_initialized = 1; +} + +/* + * Called after all the initialization is done. If we didn't find any + * APIC bugs then we can allow the modify fast path + */ + +static int __init io_apic_bug_finalize(void) +{ + if (sis_apic_bug == -1) + sis_apic_bug = 0; + return 0; +} + +late_initcall(io_apic_bug_finalize); + +static void resume_ioapic_id(int ioapic_idx) +{ + unsigned long flags; + union IO_APIC_reg_00 reg_00; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic_idx, 0); + if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { + reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); + io_apic_write(ioapic_idx, 0, reg_00.raw); + } + raw_spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void ioapic_resume(void) +{ + int ioapic_idx; + + for_each_ioapic_reverse(ioapic_idx) + resume_ioapic_id(ioapic_idx); + + restore_ioapic_entries(); +} + +static struct syscore_ops ioapic_syscore_ops = { + .suspend = save_ioapic_entries, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_ops(void) +{ + register_syscore_ops(&ioapic_syscore_ops); + + return 0; +} + +device_initcall(ioapic_init_ops); + +static int +io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) +{ + struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); + int ret; + + if (!cfg) + return -EINVAL; + ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin); + if (!ret) + setup_ioapic_irq(irq, cfg, attr); + return ret; +} + +static int io_apic_get_redir_entries(int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* The register returns the maximum index redir index + * supported, which is one less than the total number of redir + * entries. + */ + return reg_01.bits.entries + 1; +} + +unsigned int arch_dynirq_lower_bound(unsigned int from) +{ + /* + * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use + * gsi_top if ioapic_dynirq_base hasn't been initialized yet. + */ + return ioapic_initialized ? ioapic_dynirq_base : gsi_top; +} + +#ifdef CONFIG_X86_32 +static int io_apic_get_unique_id(int ioapic, int apic_id) +{ + union IO_APIC_reg_00 reg_00; + static physid_mask_t apic_id_map = PHYSID_MASK_NONE; + physid_mask_t tmp; + unsigned long flags; + int i = 0; + + /* + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only + * supports up to 16 on one shared APIC bus. + * + * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full + * advantage of new APIC bus architecture. + */ + + if (physids_empty(apic_id_map)) + apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map); + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + if (apic_id >= get_physical_broadcast()) { + printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " + "%d\n", ioapic, apic_id, reg_00.bits.ID); + apic_id = reg_00.bits.ID; + } + + /* + * Every APIC in a system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (apic->check_apicid_used(&apic_id_map, apic_id)) { + + for (i = 0; i < get_physical_broadcast(); i++) { + if (!apic->check_apicid_used(&apic_id_map, i)) + break; + } + + if (i == get_physical_broadcast()) + panic("Max apic_id exceeded!\n"); + + printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " + "trying %d\n", ioapic, apic_id, i); + + apic_id = i; + } + + apic->apicid_to_cpu_present(apic_id, &tmp); + physids_or(apic_id_map, apic_id_map, tmp); + + if (reg_00.bits.ID != apic_id) { + reg_00.bits.ID = apic_id; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + /* Sanity check */ + if (reg_00.bits.ID != apic_id) { + pr_err("IOAPIC[%d]: Unable to change apic_id!\n", + ioapic); + return -1; + } + } + + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); + + return apic_id; +} + +static u8 io_apic_unique_id(int idx, u8 id) +{ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(idx, id); + else + return id; +} +#else +static u8 io_apic_unique_id(int idx, u8 id) +{ + union IO_APIC_reg_00 reg_00; + DECLARE_BITMAP(used, 256); + unsigned long flags; + u8 new_id; + int i; + + bitmap_zero(used, 256); + for_each_ioapic(i) + __set_bit(mpc_ioapic_id(i), used); + + /* Hand out the requested id if available */ + if (!test_bit(id, used)) + return id; + + /* + * Read the current id from the ioapic and keep it if + * available. + */ + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + new_id = reg_00.bits.ID; + if (!test_bit(new_id, used)) { + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Using reg apic_id %d instead of %d\n", + idx, new_id, id); + return new_id; + } + + /* + * Get the next free id and write it to the ioapic. + */ + new_id = find_first_zero_bit(used, 256); + reg_00.bits.ID = new_id; + raw_spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(idx, 0, reg_00.raw); + reg_00.raw = io_apic_read(idx, 0); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + /* Sanity check */ + BUG_ON(reg_00.bits.ID != new_id); + + return new_id; +} +#endif + +static int io_apic_get_version(int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + raw_spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + raw_spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.version; +} + +int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity) +{ + int ioapic, pin, idx; + + if (skip_ioapic_setup) + return -1; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return -1; + + pin = mp_find_ioapic_pin(ioapic, gsi); + if (pin < 0) + return -1; + + idx = find_irq_entry(ioapic, pin, mp_INT); + if (idx < 0) + return -1; + + *trigger = irq_trigger(idx); + *polarity = irq_polarity(idx); + return 0; +} + +/* + * This function currently is only a helper for the i386 smp boot process where + * we need to reprogram the ioredtbls to cater for the cpus which have come online + * so mask in all cases should simply be apic->target_cpus() + */ +#ifdef CONFIG_SMP +void __init setup_ioapic_dest(void) +{ + int pin, ioapic, irq, irq_entry; + const struct cpumask *mask; + struct irq_data *idata; + + if (skip_ioapic_setup == 1) + return; + + for_each_ioapic_pin(ioapic, pin) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + + irq = pin_2_irq(irq_entry, ioapic, pin, 0); + if (irq < 0 || !mp_init_irq_at_boot(ioapic, irq)) + continue; + + idata = irq_get_irq_data(irq); + + /* + * Honour affinities which have been set in early boot + */ + if (!irqd_can_balance(idata) || irqd_affinity_was_set(idata)) + mask = idata->affinity; + else + mask = apic->target_cpus(); + + x86_io_apic_ops.set_affinity(idata, mask, false); + } + +} +#endif + +#define IOAPIC_RESOURCE_NAME_SIZE 11 + +static struct resource *ioapic_resources; + +static struct resource * __init ioapic_setup_resources(void) +{ + unsigned long n; + struct resource *res; + char *mem; + int i, num = 0; + + for_each_ioapic(i) + num++; + if (num == 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= num; + + mem = alloc_bootmem(n); + res = (void *)mem; + + mem += sizeof(struct resource) * num; + + num = 0; + for_each_ioapic(i) { + res[num].name = mem; + res[num].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + num++; + ioapics[i].iomem_res = res; + } + + ioapic_resources = res; + + return res; +} + +void __init native_io_apic_init_mappings(void) +{ + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + struct resource *ioapic_res; + int i; + + ioapic_res = ioapic_setup_resources(); + for_each_ioapic(i) { + if (smp_found_config) { + ioapic_phys = mpc_ioapic_addr(i); +#ifdef CONFIG_X86_32 + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + skip_ioapic_setup = 1; + goto fake_ioapic_page; + } +#endif + } else { +#ifdef CONFIG_X86_32 +fake_ioapic_page: +#endif + ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), + ioapic_phys); + idx++; + + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; + ioapic_res++; + } +} + +void __init ioapic_insert_resources(void) +{ + int i; + struct resource *r = ioapic_resources; + + if (!r) { + if (nr_ioapics > 0) + printk(KERN_ERR + "IO APIC resources couldn't be allocated.\n"); + return; + } + + for_each_ioapic(i) { + insert_resource(&iomem_resource, r); + r++; + } +} + +int mp_find_ioapic(u32 gsi) +{ + int i; + + if (nr_ioapics == 0) + return -1; + + /* Find the IOAPIC that manages this GSI. */ + for_each_ioapic(i) { + struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); + if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +int mp_find_ioapic_pin(int ioapic, u32 gsi) +{ + struct mp_ioapic_gsi *gsi_cfg; + + if (WARN_ON(ioapic < 0)) + return -1; + + gsi_cfg = mp_ioapic_gsi_routing(ioapic); + if (WARN_ON(gsi > gsi_cfg->gsi_end)) + return -1; + + return gsi - gsi_cfg->gsi_base; +} + +static int bad_ioapic_register(int idx) +{ + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + + reg_00.raw = io_apic_read(idx, 0); + reg_01.raw = io_apic_read(idx, 1); + reg_02.raw = io_apic_read(idx, 2); + + if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { + pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", + mpc_ioapic_addr(idx)); + return 1; + } + + return 0; +} + +static int find_free_ioapic_entry(void) +{ + int idx; + + for (idx = 0; idx < MAX_IO_APICS; idx++) + if (ioapics[idx].nr_registers == 0) + return idx; + + return MAX_IO_APICS; +} + +/** + * mp_register_ioapic - Register an IOAPIC device + * @id: hardware IOAPIC ID + * @address: physical address of IOAPIC register area + * @gsi_base: base of GSI associated with the IOAPIC + * @cfg: configuration information for the IOAPIC + */ +int mp_register_ioapic(int id, u32 address, u32 gsi_base, + struct ioapic_domain_cfg *cfg) +{ + bool hotplug = !!ioapic_initialized; + struct mp_ioapic_gsi *gsi_cfg; + int idx, ioapic, entries; + u32 gsi_end; + + if (!address) { + pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); + return -EINVAL; + } + for_each_ioapic(ioapic) + if (ioapics[ioapic].mp_config.apicaddr == address) { + pr_warn("address 0x%x conflicts with IOAPIC%d\n", + address, ioapic); + return -EEXIST; + } + + idx = find_free_ioapic_entry(); + if (idx >= MAX_IO_APICS) { + pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", + MAX_IO_APICS, idx); + return -ENOSPC; + } + + ioapics[idx].mp_config.type = MP_IOAPIC; + ioapics[idx].mp_config.flags = MPC_APIC_USABLE; + ioapics[idx].mp_config.apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + if (bad_ioapic_register(idx)) { + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENODEV; + } + + ioapics[idx].mp_config.apicid = io_apic_unique_id(idx, id); + ioapics[idx].mp_config.apicver = io_apic_get_version(idx); + + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + entries = io_apic_get_redir_entries(idx); + gsi_end = gsi_base + entries - 1; + for_each_ioapic(ioapic) { + gsi_cfg = mp_ioapic_gsi_routing(ioapic); + if ((gsi_base >= gsi_cfg->gsi_base && + gsi_base <= gsi_cfg->gsi_end) || + (gsi_end >= gsi_cfg->gsi_base && + gsi_end <= gsi_cfg->gsi_end)) { + pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", + gsi_base, gsi_end, + gsi_cfg->gsi_base, gsi_cfg->gsi_end); + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENOSPC; + } + } + gsi_cfg = mp_ioapic_gsi_routing(idx); + gsi_cfg->gsi_base = gsi_base; + gsi_cfg->gsi_end = gsi_end; + + ioapics[idx].irqdomain = NULL; + ioapics[idx].irqdomain_cfg = *cfg; + + /* + * If mp_register_ioapic() is called during early boot stage when + * walking ACPI/SFI/DT tables, it's too early to create irqdomain, + * we are still using bootmem allocator. So delay it to setup_IO_APIC(). + */ + if (hotplug) { + if (mp_irqdomain_create(idx)) { + clear_fixmap(FIX_IO_APIC_BASE_0 + idx); + return -ENOMEM; + } + alloc_ioapic_saved_registers(idx); + } + + if (gsi_cfg->gsi_end >= gsi_top) + gsi_top = gsi_cfg->gsi_end + 1; + if (nr_ioapics <= idx) + nr_ioapics = idx + 1; + + /* Set nr_registers to mark entry present */ + ioapics[idx].nr_registers = entries; + + pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", + idx, mpc_ioapic_id(idx), + mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), + gsi_cfg->gsi_base, gsi_cfg->gsi_end); + + return 0; +} + +int mp_unregister_ioapic(u32 gsi_base) +{ + int ioapic, pin; + int found = 0; + struct mp_pin_info *pin_info; + + for_each_ioapic(ioapic) + if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) { + found = 1; + break; + } + if (!found) { + pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); + return -ENODEV; + } + + for_each_pin(ioapic, pin) { + pin_info = mp_pin_info(ioapic, pin); + if (pin_info->count) { + pr_warn("pin%d on IOAPIC%d is still in use.\n", + pin, ioapic); + return -EBUSY; + } + } + + /* Mark entry not present */ + ioapics[ioapic].nr_registers = 0; + ioapic_destroy_irqdomain(ioapic); + free_ioapic_saved_registers(ioapic); + if (ioapics[ioapic].iomem_res) + release_resource(ioapics[ioapic].iomem_res); + clear_fixmap(FIX_IO_APIC_BASE_0 + ioapic); + memset(&ioapics[ioapic], 0, sizeof(ioapics[ioapic])); + + return 0; +} + +int mp_ioapic_registered(u32 gsi_base) +{ + int ioapic; + + for_each_ioapic(ioapic) + if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) + return 1; + + return 0; +} + +static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr, + int ioapic, int ioapic_pin, + int trigger, int polarity) +{ + irq_attr->ioapic = ioapic; + irq_attr->ioapic_pin = ioapic_pin; + irq_attr->trigger = trigger; + irq_attr->polarity = polarity; +} + +int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hwirq) +{ + int ioapic = (int)(long)domain->host_data; + struct mp_pin_info *info = mp_pin_info(ioapic, hwirq); + struct io_apic_irq_attr attr; + + /* Get default attribute if not set by caller yet */ + if (!info->set) { + u32 gsi = mp_pin_to_gsi(ioapic, hwirq); + + if (acpi_get_override_irq(gsi, &info->trigger, + &info->polarity) < 0) { + /* + * PCI interrupts are always polarity one level + * triggered. + */ + info->trigger = 1; + info->polarity = 1; + } + info->node = NUMA_NO_NODE; + + /* + * setup_IO_APIC_irqs() programs all legacy IRQs with default + * trigger and polarity attributes. Don't set the flag for that + * case so the first legacy IRQ user could reprogram the pin + * with real trigger and polarity attributes. + */ + if (virq >= nr_legacy_irqs() || info->count) + info->set = 1; + } + set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger, + info->polarity); + + return io_apic_setup_irq_pin(virq, info->node, &attr); +} + +void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq) +{ + struct irq_data *data = irq_get_irq_data(virq); + struct irq_cfg *cfg = irq_cfg(virq); + int ioapic = (int)(long)domain->host_data; + int pin = (int)data->hwirq; + + ioapic_mask_entry(ioapic, pin); + __remove_pin_from_irq(cfg, ioapic, pin); + WARN_ON(!list_empty(&cfg->irq_2_pin)); + arch_teardown_hwirq(virq); +} + +int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node) +{ + int ret = 0; + int ioapic, pin; + struct mp_pin_info *info; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return -ENODEV; + + pin = mp_find_ioapic_pin(ioapic, gsi); + info = mp_pin_info(ioapic, pin); + trigger = trigger ? 1 : 0; + polarity = polarity ? 1 : 0; + + mutex_lock(&ioapic_mutex); + if (!info->set) { + info->trigger = trigger; + info->polarity = polarity; + info->node = node; + info->set = 1; + } else if (info->trigger != trigger || info->polarity != polarity) { + ret = -EBUSY; + } + mutex_unlock(&ioapic_mutex); + + return ret; +} + +/* Enable IOAPIC early just for system timer */ +void __init pre_init_apic_IRQ0(void) +{ + struct io_apic_irq_attr attr = { 0, 0, 0, 0 }; + + printk(KERN_INFO "Early APIC setup for system timer0\n"); +#ifndef CONFIG_SMP + physid_set_mask_of_physid(boot_cpu_physical_apicid, + &phys_cpu_present_map); +#endif + setup_local_APIC(); + + io_apic_setup_irq_pin(0, 0, &attr); + irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, + "edge"); +} -- cgit 1.2.3-korg