From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/x86/Kconfig | 2600 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2600 insertions(+) create mode 100644 kernel/arch/x86/Kconfig (limited to 'kernel/arch/x86/Kconfig') diff --git a/kernel/arch/x86/Kconfig b/kernel/arch/x86/Kconfig new file mode 100644 index 000000000..aac357a4c --- /dev/null +++ b/kernel/arch/x86/Kconfig @@ -0,0 +1,2600 @@ +# Select 32 or 64 bit +config 64BIT + bool "64-bit kernel" if ARCH = "x86" + default ARCH != "i386" + ---help--- + Say yes to build a 64-bit kernel - formerly known as x86_64 + Say no to build a 32-bit kernel - formerly known as i386 + +config X86_32 + def_bool y + depends on !64BIT + select CLKSRC_I8253 + select HAVE_UID16 + +config X86_64 + def_bool y + depends on 64BIT + select X86_DEV_DMA_OPS + select ARCH_USE_CMPXCHG_LOCKREF + select HAVE_LIVEPATCH + +### Arch settings +config X86 + def_bool y + select HAVE_PREEMPT_LAZY + select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI + select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI + select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS + select ARCH_HAS_FAST_MULTIPLIER + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select HAVE_AOUT if X86_32 + select HAVE_UNSTABLE_SCHED_CLOCK + select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 + select ARCH_SUPPORTS_INT128 if X86_64 + select HAVE_IDE + select HAVE_OPROFILE + select HAVE_PCSPKR_PLATFORM + select HAVE_PERF_EVENTS + select HAVE_IOREMAP_PROT + select HAVE_KPROBES + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_WANT_FRAME_POINTERS + select HAVE_DMA_ATTRS + select HAVE_DMA_CONTIGUOUS + select HAVE_KRETPROBES + select GENERIC_EARLY_IOREMAP + select HAVE_OPTPROBES + select HAVE_KPROBES_ON_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FENTRY if X86_64 + select HAVE_C_RECORDMCOUNT + select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_GRAPH_FP_TEST + select HAVE_SYSCALL_TRACEPOINTS + select SYSCTL_EXCEPTION_TRACE + select HAVE_KVM + select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK + select HAVE_GENERIC_DMA_COHERENT if X86_32 + select HAVE_EFFICIENT_UNALIGNED_ACCESS + select USER_STACKTRACE_SUPPORT + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_DMA_API_DEBUG + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ + select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZ4 + select HAVE_HW_BREAKPOINT + select HAVE_MIXED_BREAKPOINTS_REGS + select PERF_EVENTS + select HAVE_PERF_EVENTS_NMI + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP + select HAVE_DEBUG_KMEMLEAK + select ANON_INODES + select HAVE_ALIGNED_STRUCT_PAGE if SLUB + select HAVE_CMPXCHG_LOCAL + select HAVE_CMPXCHG_DOUBLE + select HAVE_ARCH_KMEMCHECK + select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP + select HAVE_USER_RETURN_NOTIFIER + select ARCH_HAS_ELF_RANDOMIZE + select HAVE_ARCH_JUMP_LABEL + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select SPARSE_IRQ + select GENERIC_FIND_FIRST_BIT + select GENERIC_IRQ_PROBE + select GENERIC_PENDING_IRQ if SMP + select GENERIC_IRQ_SHOW + select GENERIC_CLOCKEVENTS_MIN_ADJUST + select IRQ_FORCED_THREADING + select HAVE_BPF_JIT if X86_64 + select HAVE_ARCH_TRANSPARENT_HUGEPAGE + select HAVE_ARCH_HUGE_VMAP if X86_64 || (X86_32 && X86_PAE) + select ARCH_HAS_SG_CHAIN + select CLKEVT_I8253 + select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_IOMAP + select DCACHE_WORD_ACCESS + select GENERIC_SMP_IDLE_THREAD + select ARCH_WANT_IPC_PARSE_VERSION if X86_32 + select HAVE_ARCH_SECCOMP_FILTER + select BUILDTIME_EXTABLE_SORT + select GENERIC_CMOS_UPDATE + select HAVE_ARCH_SOFT_DIRTY if X86_64 + select CLOCKSOURCE_WATCHDOG + select GENERIC_CLOCKEVENTS + select ARCH_CLOCKSOURCE_DATA + select CLOCKSOURCE_VALIDATE_LAST_CYCLE + select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC) + select GENERIC_TIME_VSYSCALL + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HAVE_CONTEXT_TRACKING if X86_64 + select HAVE_IRQ_TIME_ACCOUNTING + select VIRT_TO_BUS + select MODULES_USE_ELF_REL if X86_32 + select MODULES_USE_ELF_RELA if X86_64 + select CLONE_BACKWARDS if X86_32 + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_QUEUE_RWLOCK + select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION + select OLD_SIGACTION if X86_32 + select COMPAT_OLD_SIGACTION if IA32_EMULATION + select RTC_LIB + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64 + select HAVE_CC_STACKPROTECTOR + select GENERIC_CPU_AUTOPROBE + select HAVE_ARCH_AUDITSYSCALL + select ARCH_SUPPORTS_ATOMIC_RMW + select HAVE_ACPI_APEI if ACPI + select HAVE_ACPI_APEI_NMI if ACPI + select ACPI_LEGACY_TABLES_LOOKUP if ACPI + select X86_FEATURE_NAMES if PROC_FS + select SRCU + +config INSTRUCTION_DECODER + def_bool y + depends on KPROBES || PERF_EVENTS || UPROBES + +config PERF_EVENTS_INTEL_UNCORE + def_bool y + depends on PERF_EVENTS && CPU_SUP_INTEL && PCI + +config OUTPUT_FORMAT + string + default "elf32-i386" if X86_32 + default "elf64-x86-64" if X86_64 + +config ARCH_DEFCONFIG + string + default "arch/x86/configs/i386_defconfig" if X86_32 + default "arch/x86/configs/x86_64_defconfig" if X86_64 + +config LOCKDEP_SUPPORT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + +config MMU + def_bool y + +config SBUS + bool + +config NEED_DMA_MAP_STATE + def_bool y + depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB + +config NEED_SG_DMA_LENGTH + def_bool y + +config GENERIC_ISA_DMA + def_bool y + depends on ISA_DMA_API + +config GENERIC_BUG + def_bool y + depends on BUG + select GENERIC_BUG_RELATIVE_POINTERS if X86_64 + +config GENERIC_BUG_RELATIVE_POINTERS + bool + +config GENERIC_HWEIGHT + def_bool y + +config ARCH_MAY_HAVE_PC_FDC + def_bool y + depends on ISA_DMA_API + +config RWSEM_GENERIC_SPINLOCK + def_bool PREEMPT_RT_FULL + +config RWSEM_XCHGADD_ALGORITHM + def_bool !RWSEM_GENERIC_SPINLOCK && !PREEMPT_RT_FULL + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config ARCH_HAS_CPU_RELAX + def_bool y + +config ARCH_HAS_CACHE_LINE_SIZE + def_bool y + +config HAVE_SETUP_PER_CPU_AREA + def_bool y + +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y + +config ARCH_HIBERNATION_POSSIBLE + def_bool y + +config ARCH_SUSPEND_POSSIBLE + def_bool y + +config ARCH_WANT_HUGE_PMD_SHARE + def_bool y + +config ARCH_WANT_GENERAL_HUGETLB + def_bool y + +config ZONE_DMA32 + def_bool y if X86_64 + +config AUDIT_ARCH + def_bool y if X86_64 + +config ARCH_SUPPORTS_OPTIMIZED_INLINING + def_bool y + +config ARCH_SUPPORTS_DEBUG_PAGEALLOC + def_bool y + +config HAVE_INTEL_TXT + def_bool y + depends on INTEL_IOMMU && ACPI + +config X86_32_SMP + def_bool y + depends on X86_32 && SMP + +config X86_64_SMP + def_bool y + depends on X86_64 && SMP + +config X86_HT + def_bool y + depends on SMP + +config X86_32_LAZY_GS + def_bool y + depends on X86_32 && !CC_STACKPROTECTOR + +config ARCH_HWEIGHT_CFLAGS + string + default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 + default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 + +config ARCH_SUPPORTS_UPROBES + def_bool y + +config FIX_EARLYCON_MEM + def_bool y + +config PGTABLE_LEVELS + int + default 4 if X86_64 + default 3 if X86_PAE + default 2 + +source "init/Kconfig" +source "kernel/Kconfig.freezer" + +menu "Processor type and features" + +config ZONE_DMA + bool "DMA memory allocation support" if EXPERT + default y + help + DMA memory allocation support allows devices with less than 32-bit + addressing to allocate within the first 16MB of address space. + Disable if no such devices will be used. + + If unsure, say Y. + +config SMP + bool "Symmetric multi-processing support" + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + Note that if you say Y here and choose architecture "586" or + "Pentium" under "Processor family", the kernel will not work on 486 + architectures. Similarly, multiprocessor kernels for the "PPro" + architecture may not work on all Pentium based boards. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. The "Advanced Power + Management" code will be disabled if you say Y here. + + See also , + and the SMP-HOWTO available at + . + + If you don't know what to do here, say N. + +config X86_FEATURE_NAMES + bool "Processor feature human-readable names" if EMBEDDED + default y + ---help--- + This option compiles in a table of x86 feature bits and corresponding + names. This is required to support /proc/cpuinfo and a few kernel + messages. You can disable this to save space, at the expense of + making those few kernel messages show numeric feature bits instead. + + If in doubt, say Y. + +config X86_X2APIC + bool "Support x2apic" + depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP + ---help--- + This enables x2apic support on CPUs that have this feature. + + This allows 32-bit apic IDs (so it can support very large systems), + and accesses the local apic via MSRs not via mmio. + + If you don't know what to do here, say N. + +config X86_MPPARSE + bool "Enable MPS table" if ACPI || SFI + default y + depends on X86_LOCAL_APIC + ---help--- + For old smp systems that do not have proper acpi support. Newer systems + (esp with 64bit cpus) with acpi support, MADT and DSDT will override it + +config X86_BIGSMP + bool "Support for big SMP systems with more than 8 CPUs" + depends on X86_32 && SMP + ---help--- + This option is needed for the systems that have more than 8 CPUs + +config GOLDFISH + def_bool y + depends on X86_GOLDFISH + +if X86_32 +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 32 bit x86 platforms: + Goldfish (Android emulator) + AMD Elan + RDC R-321x SoC + SGI 320/540 (Visual Workstation) + STA2X11-based (e.g. Northville) + Moorestown MID devices + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif + +if X86_64 +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 64 bit x86 platforms: + Numascale NumaChip + ScaleMP vSMP + SGI Ultraviolet + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif +# This is an alphabetically sorted list of 64 bit extended platforms +# Please maintain the alphabetic order if and when there are additions +config X86_NUMACHIP + bool "Numascale NumaChip" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on SMP + depends on X86_X2APIC + depends on PCI_MMCONFIG + ---help--- + Adds support for Numascale NumaChip large-SMP systems. Needed to + enable more than ~168 cores. + If you don't have one of these, you should say N here. + +config X86_VSMP + bool "ScaleMP vSMP" + select HYPERVISOR_GUEST + select PARAVIRT + depends on X86_64 && PCI + depends on X86_EXTENDED_PLATFORM + depends on SMP + ---help--- + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + +config X86_UV + bool "SGI Ultraviolet" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on X86_X2APIC + ---help--- + This option is needed in order to support SGI Ultraviolet systems. + If you don't have one of these, you should say N here. + +# Following is an alphabetically sorted list of 32 bit extended platforms +# Please maintain the alphabetic order if and when there are additions + +config X86_GOLDFISH + bool "Goldfish (Virtual Platform)" + depends on X86_EXTENDED_PLATFORM + ---help--- + Enable support for the Goldfish virtual platform used primarily + for Android development. Unless you are building for the Android + Goldfish emulator say N here. + +config X86_INTEL_CE + bool "CE4100 TV platform" + depends on PCI + depends on PCI_GODIRECT + depends on X86_IO_APIC + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + select X86_REBOOTFIXUPS + select OF + select OF_EARLY_FLATTREE + select IRQ_DOMAIN + ---help--- + Select for the Intel CE media processor (CE4100) SOC. + This option compiles in support for the CE4100 SOC for settop + boxes and media devices. + +config X86_INTEL_MID + bool "Intel MID platform support" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + depends on X86_PLATFORM_DEVICES + depends on PCI + depends on PCI_GOANY + depends on X86_IO_APIC + select SFI + select I2C + select DW_APB_TIMER + select APB_TIMER + select INTEL_SCU_IPC + select MFD_INTEL_MSIC + ---help--- + Select to build a kernel capable of supporting Intel MID (Mobile + Internet Device) platform systems which do not have the PCI legacy + interfaces. If you are building for a PC class system say N here. + + Intel MID platforms are based on an Intel processor and chipset which + consume less power than most of the x86 derivatives. + +config X86_INTEL_QUARK + bool "Intel Quark platform support" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + depends on X86_PLATFORM_DEVICES + depends on X86_TSC + depends on PCI + depends on PCI_GOANY + depends on X86_IO_APIC + select IOSF_MBI + select INTEL_IMR + select COMMON_CLK + ---help--- + Select to include support for Quark X1000 SoC. + Say Y here if you have a Quark based system such as the Arduino + compatible Intel Galileo. + +config X86_INTEL_LPSS + bool "Intel Low Power Subsystem Support" + depends on ACPI + select COMMON_CLK + select PINCTRL + ---help--- + Select to build support for Intel Low Power Subsystem such as + found on Intel Lynxpoint PCH. Selecting this option enables + things like clock tree (common clock framework) and pincontrol + which are needed by the LPSS peripheral drivers. + +config X86_AMD_PLATFORM_DEVICE + bool "AMD ACPI2Platform devices support" + depends on ACPI + select COMMON_CLK + select PINCTRL + ---help--- + Select to interpret AMD specific ACPI device to platform device + such as I2C, UART, GPIO found on AMD Carrizo and later chipsets. + I2C and UART depend on COMMON_CLK to set clock. GPIO driver is + implemented under PINCTRL subsystem. + +config IOSF_MBI + tristate "Intel SoC IOSF Sideband support for SoC platforms" + depends on PCI + ---help--- + This option enables sideband register access support for Intel SoC + platforms. On these platforms the IOSF sideband is used in lieu of + MSR's for some register accesses, mostly but not limited to thermal + and power. Drivers may query the availability of this device to + determine if they need the sideband in order to work on these + platforms. The sideband is available on the following SoC products. + This list is not meant to be exclusive. + - BayTrail + - Braswell + - Quark + + You should say Y if you are running a kernel on one of these SoC's. + +config IOSF_MBI_DEBUG + bool "Enable IOSF sideband access through debugfs" + depends on IOSF_MBI && DEBUG_FS + ---help--- + Select this option to expose the IOSF sideband access registers (MCR, + MDR, MCRX) through debugfs to write and read register information from + different units on the SoC. This is most useful for obtaining device + state information for debug and analysis. As this is a general access + mechanism, users of this option would have specific knowledge of the + device they want to access. + + If you don't require the option or are in doubt, say N. + +config X86_RDC321X + bool "RDC R-321x SoC" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + select M486 + select X86_REBOOTFIXUPS + ---help--- + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + +config X86_32_NON_STANDARD + bool "Support non-standard 32-bit SMP architectures" + depends on X86_32 && SMP + depends on X86_EXTENDED_PLATFORM + ---help--- + This option compiles in the bigsmp and STA2X11 default + subarchitectures. It is intended for a generic binary + kernel. If you select them all, kernel will probe it one by + one and will fallback to default. + +# Alphabetically sorted list of Non standard 32 bit platforms + +config X86_SUPPORTS_MEMORY_FAILURE + def_bool y + # MCE code calls memory_failure(): + depends on X86_MCE + # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: + # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: + depends on X86_64 || !SPARSEMEM + select ARCH_SUPPORTS_MEMORY_FAILURE + +config STA2X11 + bool "STA2X11 Companion Chip Support" + depends on X86_32_NON_STANDARD && PCI + select X86_DEV_DMA_OPS + select X86_DMA_REMAP + select SWIOTLB + select MFD_STA2X11 + select ARCH_REQUIRE_GPIOLIB + default n + ---help--- + This adds support for boards based on the STA2X11 IO-Hub, + a.k.a. "ConneXt". The chip is used in place of the standard + PC chipset, so all "standard" peripherals are missing. If this + option is selected the kernel will still be able to boot on + standard PC machines. + +config X86_32_IRIS + tristate "Eurobraille/Iris poweroff module" + depends on X86_32 + ---help--- + The Iris machines from EuroBraille do not have APM or ACPI support + to shut themselves down properly. A special I/O sequence is + needed to do so, which is what this module does at + kernel shutdown. + + This is only for Iris machines from EuroBraille. + + If unused, say N. + +config SCHED_OMIT_FRAME_POINTER + def_bool y + prompt "Single-depth WCHAN output" + depends on X86 + ---help--- + Calculate simpler /proc//wchan values. If this option + is disabled then wchan values will recurse back to the + caller function. This provides more accurate wchan values, + at the expense of slightly more scheduling overhead. + + If in doubt, say "Y". + +menuconfig HYPERVISOR_GUEST + bool "Linux guest support" + ---help--- + Say Y here to enable options for running Linux under various hyper- + visors. This option enables basic hypervisor detection and platform + setup. + + If you say N, all options in this submenu will be skipped and + disabled, and Linux guest support won't be built in. + +if HYPERVISOR_GUEST + +config PARAVIRT + bool "Enable paravirtualization code" + ---help--- + This changes the kernel so it can modify itself when it is run + under a hypervisor, potentially improving performance significantly + over full virtualization. However, when run without a hypervisor + the kernel is theoretically slower and slightly larger. + +config PARAVIRT_DEBUG + bool "paravirt-ops debugging" + depends on PARAVIRT && DEBUG_KERNEL + ---help--- + Enable to debug paravirt_ops internals. Specifically, BUG if + a paravirt_op is missing when it is called. + +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP + select UNINLINE_SPIN_UNLOCK + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + It has a minimal impact on native kernels and gives a nice performance + benefit on paravirtualized KVM / Xen kernels. + + If you are unsure how to answer this question, answer Y. + +source "arch/x86/xen/Kconfig" + +config KVM_GUEST + bool "KVM Guest support (including kvmclock)" + depends on PARAVIRT + select PARAVIRT_CLOCK + default y + ---help--- + This option enables various optimizations for running under the KVM + hypervisor. It includes a paravirtualized clock, so that instead + of relying on a PIT (or probably other) emulation by the + underlying device model, the host provides the guest with + timing infrastructure such as time of day, and system time + +config KVM_DEBUG_FS + bool "Enable debug information for KVM Guests in debugfs" + depends on KVM_GUEST && DEBUG_FS + default n + ---help--- + This option enables collection of various statistics for KVM guest. + Statistics are displayed in debugfs filesystem. Enabling this option + may incur significant overhead. + +source "arch/x86/lguest/Kconfig" + +config PARAVIRT_TIME_ACCOUNTING + bool "Paravirtual steal time accounting" + depends on PARAVIRT + default n + ---help--- + Select this option to enable fine granularity task steal time + accounting. Time spent executing other tasks in parallel with + the current vCPU is discounted from the vCPU power. To account for + that, there can be a small performance impact. + + If in doubt, say N here. + +config PARAVIRT_CLOCK + bool + +endif #HYPERVISOR_GUEST + +config NO_BOOTMEM + def_bool y + +source "arch/x86/Kconfig.cpu" + +config HPET_TIMER + def_bool X86_64 + prompt "HPET Timer Support" if X86_32 + ---help--- + Use the IA-PC HPET (High Precision Event Timer) to manage + time in preference to the PIT and RTC, if a HPET is + present. + HPET is the next generation timer replacing legacy 8254s. + The HPET provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. You can find the HPET spec at + . + + You can safely choose Y here. However, HPET will only be + activated if the platform and the BIOS support this feature. + Otherwise the 8254 will be used for timing services. + + Choose N to continue using the legacy 8254 timer. + +config HPET_EMULATE_RTC + def_bool y + depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) + +config APB_TIMER + def_bool y if X86_INTEL_MID + prompt "Intel MID APB Timer Support" if X86_INTEL_MID + select DW_APB_TIMER + depends on X86_INTEL_MID && SFI + help + APB timer is the replacement for 8254, HPET on X86 MID platforms. + The APBT provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. APB timers are always running regardless of CPU + C states, they are used as per CPU clockevent device when possible. + +# Mark as expert because too many people got it wrong. +# The code disables itself when not needed. +config DMI + default y + select DMI_SCAN_MACHINE_NON_EFI_FALLBACK + bool "Enable DMI scanning" if EXPERT + ---help--- + Enabled scanning of DMI to identify machine quirks. Say Y + here unless you have verified that your setup is not + affected by entries in the DMI blacklist. Required by PNP + BIOS code. + +config GART_IOMMU + bool "Old AMD GART IOMMU support" + select SWIOTLB + depends on X86_64 && PCI && AMD_NB + ---help--- + Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron + GART based hardware IOMMUs. + + The GART supports full DMA access for devices with 32-bit access + limitations, on systems with more than 3 GB. This is usually needed + for USB, sound, many IDE/SATA chipsets and some other devices. + + Newer systems typically have a modern AMD IOMMU, supported via + the CONFIG_AMD_IOMMU=y config option. + + In normal configurations this driver is only active when needed: + there's more than 3 GB of memory and the system contains a + 32-bit limited device. + + If unsure, say Y. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + select SWIOTLB + depends on X86_64 && PCI + ---help--- + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. + If unsure, say Y. + +config CALGARY_IOMMU_ENABLED_BY_DEFAULT + def_bool y + prompt "Should Calgary be enabled by default?" + depends on CALGARY_IOMMU + ---help--- + Should Calgary be enabled by default? if you choose 'y', Calgary + will be used (if it exists). If you choose 'n', Calgary will not be + used even if it exists. If you choose 'n' and would like to use + Calgary anyway, pass 'iommu=calgary' on the kernel command line. + If unsure, say Y. + +# need this always selected by IOMMU for the VIA workaround +config SWIOTLB + def_bool y if X86_64 + ---help--- + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU. Using this PCI devices + which can only access 32-bits of memory can be used on systems + with more than 3 GB of memory. + If unsure, say Y. + +config IOMMU_HELPER + def_bool y + depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU + +config MAXSMP + bool "Enable Maximum number of SMP Processors and NUMA Nodes" + depends on X86_64 && SMP && DEBUG_KERNEL + select CPUMASK_OFFSTACK if !PREEMPT_RT_FULL + ---help--- + Enable maximum number of CPUS and NUMA Nodes for this architecture. + If unsure, say N. + +config NR_CPUS + int "Maximum number of CPUs" if SMP && !MAXSMP + range 2 8 if SMP && X86_32 && !X86_BIGSMP + range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK + range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64 + default "1" if !SMP + default "8192" if MAXSMP + default "32" if SMP && X86_BIGSMP + default "8" if SMP + ---help--- + This allows you to specify the maximum number of CPUs which this + kernel will support. If CPUMASK_OFFSTACK is enabled, the maximum + supported value is 4096, otherwise the maximum value is 512. The + minimum value which makes sense is 2. + + This is purely to save memory - each supported CPU adds + approximately eight kilobytes to the kernel image. + +config SCHED_SMT + bool "SMT (Hyperthreading) scheduler support" + depends on X86_HT + ---help--- + SMT scheduler support improves the CPU scheduler's decision making + when dealing with Intel Pentium 4 chips with HyperThreading at a + cost of slightly increased overhead in some places. If unsure say + N here. + +config SCHED_MC + def_bool y + prompt "Multi-core scheduler support" + depends on X86_HT + ---help--- + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +source "kernel/Kconfig.preempt" + +config UP_LATE_INIT + def_bool y + depends on !SMP && X86_LOCAL_APIC + +config X86_UP_APIC + bool "Local APIC support on uniprocessors" if !PCI_MSI + default PCI_MSI + depends on X86_32 && !SMP && !X86_32_NON_STANDARD + ---help--- + A local APIC (Advanced Programmable Interrupt Controller) is an + integrated interrupt controller in the CPU. If you have a single-CPU + system which has a processor with a local APIC, you can say Y here to + enable and use it. If you say Y here even though your machine doesn't + have a local APIC, then the kernel will still run with no slowdown at + all. The local APIC supports CPU-generated self-interrupts (timer, + performance counters), and the NMI watchdog which detects hard + lockups. + +config X86_UP_IOAPIC + bool "IO-APIC support on uniprocessors" + depends on X86_UP_APIC + ---help--- + An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an + SMP-capable replacement for PC-style interrupt controllers. Most + SMP systems and many recent uniprocessor systems have one. + + If you have a single-CPU system with an IO-APIC, you can say Y here + to use it. If you say Y here even though your machine doesn't have + an IO-APIC, then the kernel will still run with no slowdown at all. + +config X86_LOCAL_APIC + def_bool y + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI + select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ + +config X86_IO_APIC + def_bool y + depends on X86_LOCAL_APIC || X86_UP_IOAPIC + select IRQ_DOMAIN + +config X86_REROUTE_FOR_BROKEN_BOOT_IRQS + bool "Reroute for broken boot IRQs" + depends on X86_IO_APIC + ---help--- + This option enables a workaround that fixes a source of + spurious interrupts. This is recommended when threaded + interrupt handling is used on systems where the generation of + superfluous "boot interrupts" cannot be disabled. + + Some chipsets generate a legacy INTx "boot IRQ" when the IRQ + entry in the chipset's IO-APIC is masked (as, e.g. the RT + kernel does during interrupt handling). On chipsets where this + boot IRQ generation cannot be disabled, this workaround keeps + the original IRQ line masked so that only the equivalent "boot + IRQ" is delivered to the CPUs. The workaround also tells the + kernel to set up the IRQ handler on the boot IRQ line. In this + way only one interrupt is delivered to the kernel. Otherwise + the spurious second interrupt may cause the kernel to bring + down (vital) interrupt lines. + + Only affects "broken" chipsets. Interrupt sharing may be + increased on these systems. + +config X86_MCE + bool "Machine Check / overheating reporting" + default y + ---help--- + Machine Check support allows the processor to notify the + kernel if it detects a problem (e.g. overheating, data corruption). + The action the kernel takes depends on the severity of the problem, + ranging from warning messages to halting the machine. + +config X86_MCE_INTEL + def_bool y + prompt "Intel MCE features" + depends on X86_MCE && X86_LOCAL_APIC + ---help--- + Additional support for intel specific MCE features such as + the thermal monitor. + +config X86_MCE_AMD + def_bool y + prompt "AMD MCE features" + depends on X86_MCE && X86_LOCAL_APIC + ---help--- + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + +config X86_ANCIENT_MCE + bool "Support for old Pentium 5 / WinChip machine checks" + depends on X86_32 && X86_MCE + ---help--- + Include support for machine check handling on old Pentium 5 or WinChip + systems. These typically need to be enabled explicitly on the command + line. + +config X86_MCE_THRESHOLD + depends on X86_MCE_AMD || X86_MCE_INTEL + def_bool y + +config X86_MCE_INJECT + depends on X86_MCE + tristate "Machine check injector support" + ---help--- + Provide support for injecting machine checks for testing purposes. + If you don't know what a machine check is and you don't do kernel + QA it is safe to say n. + +config X86_THERMAL_VECTOR + def_bool y + depends on X86_MCE_INTEL + +config VM86 + bool "Enable VM86 support" if EXPERT + default y + depends on X86_32 + ---help--- + This option is required by programs like DOSEMU to run + 16-bit real mode legacy code on x86 processors. It also may + be needed by software like XFree86 to initialize some video + cards via BIOS. Disabling this option saves about 6K. + +config X86_16BIT + bool "Enable support for 16-bit segments" if EXPERT + default y + ---help--- + This option is required by programs like Wine to run 16-bit + protected mode legacy code on x86 processors. Disabling + this option saves about 300 bytes on i386, or around 6K text + plus 16K runtime memory on x86-64, + +config X86_ESPFIX32 + def_bool y + depends on X86_16BIT && X86_32 + +config X86_ESPFIX64 + def_bool y + depends on X86_16BIT && X86_64 + +config X86_VSYSCALL_EMULATION + bool "Enable vsyscall emulation" if EXPERT + default y + depends on X86_64 + ---help--- + This enables emulation of the legacy vsyscall page. Disabling + it is roughly equivalent to booting with vsyscall=none, except + that it will also disable the helpful warning if a program + tries to use a vsyscall. With this option set to N, offending + programs will just segfault, citing addresses of the form + 0xffffffffff600?00. + + This option is required by many programs built before 2013, and + care should be used even with newer programs if set to N. + + Disabling this option saves about 7K of kernel size and + possibly 4K of additional runtime pagetable memory. + +config TOSHIBA + tristate "Toshiba Laptop support" + depends on X86_32 + ---help--- + This adds a driver to safely access the System Management Mode of + the CPU on Toshiba portables with a genuine Toshiba BIOS. It does + not work on models with a Phoenix BIOS. The System Management Mode + is used to set the BIOS and power saving options on Toshiba portables. + + For information on utilities to make use of this driver see the + Toshiba Linux utilities web site at: + . + + Say Y if you intend to run this kernel on a Toshiba portable. + Say N otherwise. + +config I8K + tristate "Dell laptop support" + select HWMON + ---help--- + This adds a driver to safely access the System Management Mode + of the CPU on the Dell Inspiron 8000. The System Management Mode + is used to read cpu temperature and cooling fan status and to + control the fans on the I8K portables. + + This driver has been tested only on the Inspiron 8000 but it may + also work with other Dell laptops. You can force loading on other + models by passing the parameter `force=1' to the module. Use at + your own risk. + + For information on utilities to make use of this driver see the + I8K Linux utilities web site at: + + + Say Y if you intend to run this kernel on a Dell Inspiron 8000. + Say N otherwise. + +config X86_REBOOTFIXUPS + bool "Enable X86 board specific fixups for reboot" + depends on X86_32 + ---help--- + This enables chipset and/or board specific fixups to be done + in order to get reboot to work correctly. This is only needed on + some combinations of hardware and BIOS. The symptom, for which + this config is intended, is when reboot ends with a stalled/hung + system. + + Currently, the only fixup is for the Geode machines using + CS5530A and CS5536 chipsets and the RDC R-321x SoC. + + Say Y if you want to enable the fixup. Currently, it's safe to + enable this option even if you don't need it. + Say N otherwise. + +config MICROCODE + tristate "CPU microcode loading support" + depends on CPU_SUP_AMD || CPU_SUP_INTEL + select FW_LOADER + ---help--- + + If you say Y here, you will be able to update the microcode on + certain Intel and AMD processors. The Intel support is for the + IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, + Xeon etc. The AMD support is for families 0x10 and later. You will + obviously need the actual microcode binary data itself which is not + shipped with the Linux kernel. + + This option selects the general module only, you need to select + at least one vendor specific module as well. + + To compile this driver as a module, choose M here: the module + will be called microcode. + +config MICROCODE_INTEL + bool "Intel microcode loading support" + depends on MICROCODE + default MICROCODE + select FW_LOADER + ---help--- + This options enables microcode patch loading support for Intel + processors. + + For the current Intel microcode data package go to + and search for + 'Linux Processor Microcode Data File'. + +config MICROCODE_AMD + bool "AMD microcode loading support" + depends on MICROCODE + select FW_LOADER + ---help--- + If you select this option, microcode patch loading support for AMD + processors will be enabled. + +config MICROCODE_OLD_INTERFACE + def_bool y + depends on MICROCODE + +config MICROCODE_INTEL_EARLY + bool + +config MICROCODE_AMD_EARLY + bool + +config MICROCODE_EARLY + bool "Early load microcode" + depends on MICROCODE=y && BLK_DEV_INITRD + select MICROCODE_INTEL_EARLY if MICROCODE_INTEL + select MICROCODE_AMD_EARLY if MICROCODE_AMD + default y + help + This option provides functionality to read additional microcode data + at the beginning of initrd image. The data tells kernel to load + microcode to CPU's as early as possible. No functional change if no + microcode data is glued to the initrd, therefore it's safe to say Y. + +config X86_MSR + tristate "/dev/cpu/*/msr - Model-specific register support" + ---help--- + This device gives privileged processes access to the x86 + Model-Specific Registers (MSRs). It is a character device with + major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. + MSR accesses are directed to a specific CPU on multi-processor + systems. + +config X86_CPUID + tristate "/dev/cpu/*/cpuid - CPU information support" + ---help--- + This device gives processes access to the x86 CPUID instruction to + be executed on a specific processor. It is a character device + with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to + /dev/cpu/31/cpuid. + +choice + prompt "High Memory Support" + default HIGHMEM4G + depends on X86_32 + +config NOHIGHMEM + bool "off" + ---help--- + Linux can use up to 64 Gigabytes of physical memory on x86 systems. + However, the address space of 32-bit x86 processors is only 4 + Gigabytes large. That means that, if you have a large amount of + physical memory, not all of it can be "permanently mapped" by the + kernel. The physical memory that's not permanently mapped is called + "high memory". + + If you are compiling a kernel which will never run on a machine with + more than 1 Gigabyte total physical RAM, answer "off" here (default + choice and suitable for most users). This will result in a "3GB/1GB" + split: 3GB are mapped so that each process sees a 3GB virtual memory + space and the remaining part of the 4GB virtual memory space is used + by the kernel to permanently map as much physical memory as + possible. + + If the machine has between 1 and 4 Gigabytes physical RAM, then + answer "4GB" here. + + If more than 4 Gigabytes is used then answer "64GB" here. This + selection turns Intel PAE (Physical Address Extension) mode on. + PAE implements 3-level paging on IA32 processors. PAE is fully + supported by Linux, PAE mode is implemented on all recent Intel + processors (Pentium Pro and better). NOTE: If you say "64GB" here, + then the kernel will not boot on CPUs that don't support PAE! + + The actual amount of total physical memory will either be + auto detected or can be forced by using a kernel command line option + such as "mem=256M". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If unsure, say "off". + +config HIGHMEM4G + bool "4GB" + ---help--- + Select this if you have a 32-bit processor and between 1 and 4 + gigabytes of physical RAM. + +config HIGHMEM64G + bool "64GB" + depends on !M486 + select X86_PAE + ---help--- + Select this if you have a 32-bit processor and more than 4 + gigabytes of physical RAM. + +endchoice + +choice + prompt "Memory split" if EXPERT + default VMSPLIT_3G + depends on X86_32 + ---help--- + Select the desired split between kernel and user memory. + + If the address range available to the kernel is less than the + physical memory installed, the remaining memory will be available + as "high memory". Accessing high memory is a little more costly + than low memory, as it needs to be mapped into the kernel first. + Note that increasing the kernel address space limits the range + available to user programs, making the address space there + tighter. Selecting anything other than the default 3G/1G split + will also likely make your kernel incompatible with binary-only + kernel modules. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + depends on !X86_PAE + bool "3G/1G user/kernel split (for full 1G low memory)" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_2G_OPT + depends on !X86_PAE + bool "2G/2G user/kernel split (for full 2G low memory)" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + default 0xB0000000 if VMSPLIT_3G_OPT + default 0x80000000 if VMSPLIT_2G + default 0x78000000 if VMSPLIT_2G_OPT + default 0x40000000 if VMSPLIT_1G + default 0xC0000000 + depends on X86_32 + +config HIGHMEM + def_bool y + depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) + +config X86_PAE + bool "PAE (Physical Address Extension) Support" + depends on X86_32 && !HIGHMEM4G + ---help--- + PAE is required for NX support, and furthermore enables + larger swapspace support for non-overcommit purposes. It + has the cost of more pagetable lookup overhead, and also + consumes more pagetable space per process. + +config ARCH_PHYS_ADDR_T_64BIT + def_bool y + depends on X86_64 || X86_PAE + +config ARCH_DMA_ADDR_T_64BIT + def_bool y + depends on X86_64 || HIGHMEM64G + +config X86_DIRECT_GBPAGES + def_bool y + depends on X86_64 && !DEBUG_PAGEALLOC && !KMEMCHECK + ---help--- + Certain kernel features effectively disable kernel + linear 1 GB mappings (even if the CPU otherwise + supports them), so don't confuse the user by printing + that we have them enabled. + +# Common NUMA Features +config NUMA + bool "Numa Memory Allocation and Scheduler Support" + depends on SMP + depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP) + default y if X86_BIGSMP + ---help--- + Enable NUMA (Non Uniform Memory Access) support. + + The kernel will try to allocate memory used by a CPU on the + local memory controller of the CPU and add some more + NUMA awareness to the kernel. + + For 64-bit this is recommended if the system is Intel Core i7 + (or later), AMD Opteron, or EM64T NUMA. + + For 32-bit this is only needed if you boot a 32-bit + kernel on a 64-bit NUMA platform. + + Otherwise, you should say N. + +config AMD_NUMA + def_bool y + prompt "Old style AMD Opteron NUMA detection" + depends on X86_64 && NUMA && PCI + ---help--- + Enable AMD NUMA node topology detection. You should say Y here if + you have a multi processor AMD system. This uses an old method to + read the NUMA configuration directly from the builtin Northbridge + of Opteron. It is recommended to use X86_64_ACPI_NUMA instead, + which also takes priority if both are compiled in. + +config X86_64_ACPI_NUMA + def_bool y + prompt "ACPI NUMA detection" + depends on X86_64 && NUMA && ACPI && PCI + select ACPI_NUMA + ---help--- + Enable ACPI SRAT based node topology detection. + +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. See memmap_init_zone() +# for details. +config NODES_SPAN_OTHER_NODES + def_bool y + depends on X86_64_ACPI_NUMA + +config NUMA_EMU + bool "NUMA emulation" + depends on NUMA + ---help--- + Enable NUMA emulation. A flat machine will be split + into virtual nodes when booted with "numa=fake=N", where N is the + number of nodes. This is only useful for debugging. + +config NODES_SHIFT + int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP + range 1 10 + default "10" if MAXSMP + default "6" if X86_64 + default "3" + depends on NEED_MULTIPLE_NODES + ---help--- + Specify the maximum number of NUMA Nodes available on the target + system. Increases memory reserved to accommodate various tables. + +config ARCH_HAVE_MEMORY_PRESENT + def_bool y + depends on X86_32 && DISCONTIGMEM + +config NEED_NODE_MEMMAP_SIZE + def_bool y + depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on X86_32 && !NUMA + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + depends on NUMA && X86_32 + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on NUMA && X86_32 + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD + select SPARSEMEM_STATIC if X86_32 + select SPARSEMEM_VMEMMAP_ENABLE if X86_64 + +config ARCH_SPARSEMEM_DEFAULT + def_bool y + depends on X86_64 + +config ARCH_SELECT_MEMORY_MODEL + def_bool y + depends on ARCH_SPARSEMEM_ENABLE + +config ARCH_MEMORY_PROBE + bool "Enable sysfs memory/probe interface" + depends on X86_64 && MEMORY_HOTPLUG + help + This option enables a sysfs memory/probe interface for testing. + See Documentation/memory-hotplug.txt for more information. + If you are unsure how to answer this question, answer N. + +config ARCH_PROC_KCORE_TEXT + def_bool y + depends on X86_64 && PROC_KCORE + +config ILLEGAL_POINTER_VALUE + hex + default 0 if X86_32 + default 0xdead000000000000 if X86_64 + +source "mm/Kconfig" + +config X86_PMEM_LEGACY + bool "Support non-standard NVDIMMs and ADR protected memory" + help + Treat memory marked using the non-standard e820 type of 12 as used + by the Intel Sandy Bridge-EP reference BIOS as protected memory. + The kernel will offer these regions to the 'pmem' driver so + they can be used for persistent storage. + + Say Y if unsure. + +config HIGHPTE + bool "Allocate 3rd-level pagetables from highmem" + depends on HIGHMEM + ---help--- + The VM uses one page table entry for each page of physical memory. + For systems with a lot of RAM, this can be wasteful of precious + low memory. Setting this option will put user-space page table + entries in high memory. + +config X86_CHECK_BIOS_CORRUPTION + bool "Check for low memory corruption" + ---help--- + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/kernel-parameters.txt to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. + +config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + bool "Set the default setting of memory_corruption_check" + depends on X86_CHECK_BIOS_CORRUPTION + default y + ---help--- + Set whether the default state of memory_corruption_check is + on or off. + +config X86_RESERVE_LOW + int "Amount of low memory, in kilobytes, to reserve for the BIOS" + default 64 + range 4 640 + ---help--- + Specify the amount of low memory to reserve for the BIOS. + + The first page contains BIOS data structures that the kernel + must not use, so that page must always be reserved. + + By default we reserve the first 64K of physical RAM, as a + number of BIOSes are known to corrupt that memory range + during events such as suspend/resume or monitor cable + insertion, so it must not be used by the kernel. + + You can set this to 4 if you are absolutely sure that you + trust the BIOS to get all its memory reservations and usages + right. If you know your BIOS have problems beyond the + default 64K area, you can set this to 640 to avoid using the + entire low memory range. + + If you have doubts about the BIOS (e.g. suspend/resume does + not work or there's kernel crashes after certain hardware + hotplug events) then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check + typical corruption patterns. + + Leave this to the default value of 64 if you are unsure. + +config MATH_EMULATION + bool + prompt "Math emulation" if X86_32 + ---help--- + Linux can emulate a math coprocessor (used for floating point + operations) if you don't have one. 486DX and Pentium processors have + a math coprocessor built in, 486SX and 386 do not, unless you added + a 487DX or 387, respectively. (The messages during boot time can + give you some hints here ["man dmesg"].) Everyone needs either a + coprocessor or this emulation. + + If you don't have a math coprocessor, you need to say Y here; if you + say Y here even though you have a coprocessor, the coprocessor will + be used nevertheless. (This behavior can be changed with the kernel + command line option "no387", which comes handy if your coprocessor + is broken. Try "man bootparam" or see the documentation of your boot + loader (lilo or loadlin) about how to pass options to the kernel at + boot time.) This means that it is a good idea to say Y here if you + intend to use this kernel on different machines. + + More information about the internals of the Linux math coprocessor + emulation can be found in . + + If you are not sure, say Y; apart from resulting in a 66 KB bigger + kernel, it won't hurt. + +config MTRR + def_bool y + prompt "MTRR (Memory Type Range Register) support" if EXPERT + ---help--- + On Intel P6 family processors (Pentium Pro, Pentium II and later) + the Memory Type Range Registers (MTRRs) may be used to control + processor access to memory ranges. This is most useful if you have + a video (VGA) card on a PCI or AGP bus. Enabling write-combining + allows bus write transfers to be combined into a larger transfer + before bursting over the PCI/AGP bus. This can increase performance + of image write operations 2.5 times or more. Saying Y here creates a + /proc/mtrr file which may be used to manipulate your processor's + MTRRs. Typically the X server should use this. + + This code has a reasonably generic interface so that similar + control registers on other processors can be easily supported + as well: + + The Cyrix 6x86, 6x86MX and M II processors have Address Range + Registers (ARRs) which provide a similar functionality to MTRRs. For + these, the ARRs are used to emulate the MTRRs. + The AMD K6-2 (stepping 8 and above) and K6-3 processors have two + MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing + write-combining. All of these processors are supported by this code + and it makes sense to say Y here if you have one of them. + + Saying Y here also fixes a problem with buggy SMP BIOSes which only + set the MTRRs for the boot CPU and not for the secondary CPUs. This + can lead to all sorts of problems, so it's good to say Y here. + + You can safely say Y even if your machine doesn't have MTRRs, you'll + just add about 9 KB to your kernel. + + See for more information. + +config MTRR_SANITIZER + def_bool y + prompt "MTRR cleanup support" + depends on MTRR + ---help--- + Convert MTRR layout from continuous to discrete, so X drivers can + add writeback entries. + + Can be disabled with disable_mtrr_cleanup on the kernel command line. + The largest mtrr entry size for a continuous block can be set with + mtrr_chunk_size. + + If unsure, say Y. + +config MTRR_SANITIZER_ENABLE_DEFAULT + int "MTRR cleanup enable value (0-1)" + range 0 1 + default "0" + depends on MTRR_SANITIZER + ---help--- + Enable mtrr cleanup default value + +config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT + int "MTRR cleanup spare reg num (0-7)" + range 0 7 + default "1" + depends on MTRR_SANITIZER + ---help--- + mtrr cleanup spare entries default, it can be changed via + mtrr_spare_reg_nr=N on the kernel command line. + +config X86_PAT + def_bool y + prompt "x86 PAT support" if EXPERT + depends on MTRR + ---help--- + Use PAT attributes to setup page level cache control. + + PATs are the modern equivalents of MTRRs and are much more + flexible than MTRRs. + + Say N here if you see bootup problems (boot crash, boot hang, + spontaneous reboots) or a non-working video driver. + + If unsure, say Y. + +config ARCH_USES_PG_UNCACHED + def_bool y + depends on X86_PAT + +config ARCH_RANDOM + def_bool y + prompt "x86 architectural random number generator" if EXPERT + ---help--- + Enable the x86 architectural RDRAND instruction + (Intel Bull Mountain technology) to generate random numbers. + If supported, this is a high bandwidth, cryptographically + secure hardware random number generator. + +config X86_SMAP + def_bool y + prompt "Supervisor Mode Access Prevention" if EXPERT + ---help--- + Supervisor Mode Access Prevention (SMAP) is a security + feature in newer Intel processors. There is a small + performance cost if this enabled and turned on; there is + also a small increase in the kernel size if this is enabled. + + If unsure, say Y. + +config X86_INTEL_MPX + prompt "Intel MPX (Memory Protection Extensions)" + def_bool n + depends on CPU_SUP_INTEL + ---help--- + MPX provides hardware features that can be used in + conjunction with compiler-instrumented code to check + memory references. It is designed to detect buffer + overflow or underflow bugs. + + This option enables running applications which are + instrumented or otherwise use MPX. It does not use MPX + itself inside the kernel or to protect the kernel + against bad memory references. + + Enabling this option will make the kernel larger: + ~8k of kernel text and 36 bytes of data on a 64-bit + defconfig. It adds a long to the 'mm_struct' which + will increase the kernel memory overhead of each + process and adds some branches to paths used during + exec() and munmap(). + + For details, see Documentation/x86/intel_mpx.txt + + If unsure, say N. + +config EFI + bool "EFI runtime service support" + depends on ACPI + select UCS2_STRING + select EFI_RUNTIME_WRAPPERS + ---help--- + This enables the kernel to use EFI runtime services that are + available (such as the EFI variable services). + + This option is only useful on systems that have EFI firmware. + In addition, you should use the latest ELILO loader available + at in order to take advantage + of EFI runtime services. However, even with this option, the + resultant kernel should continue to boot on existing non-EFI + platforms. + +config EFI_STUB + bool "EFI stub support" + depends on EFI && !X86_USE_3DNOW + select RELOCATABLE + ---help--- + This kernel feature allows a bzImage to be loaded directly + by EFI firmware without the use of a bootloader. + + See Documentation/efi-stub.txt for more information. + +config EFI_MIXED + bool "EFI mixed-mode support" + depends on EFI_STUB && X86_64 + ---help--- + Enabling this feature allows a 64-bit kernel to be booted + on a 32-bit firmware, provided that your CPU supports 64-bit + mode. + + Note that it is not possible to boot a mixed-mode enabled + kernel via the EFI boot stub - a bootloader that supports + the EFI handover protocol must be used. + + If unsure, say N. + +config SECCOMP + def_bool y + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + +source kernel/Kconfig.hz + +config KEXEC + bool "kexec system call" + ---help--- + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. + +config KEXEC_FILE + bool "kexec file based system call" + select BUILD_BIN2C + depends on KEXEC + depends on X86_64 + depends on CRYPTO=y + depends on CRYPTO_SHA256=y + ---help--- + This is new version of kexec system call. This system call is + file based and takes file descriptors as system call argument + for kernel and initramfs as opposed to list of segments as + accepted by previous system call. + +config KEXEC_VERIFY_SIG + bool "Verify kernel signature during kexec_file_load() syscall" + depends on KEXEC_FILE + ---help--- + This option makes kernel signature verification mandatory for + the kexec_file_load() syscall. + + In addition to that option, you need to enable signature + verification for the corresponding kernel image type being + loaded in order for this to work. + +config KEXEC_BZIMAGE_VERIFY_SIG + bool "Enable bzImage signature verification support" + depends on KEXEC_VERIFY_SIG + depends on SIGNED_PE_FILE_VERIFICATION + select SYSTEM_TRUSTED_KEYRING + ---help--- + Enable bzImage signature verification support. + +config CRASH_DUMP + bool "kernel crash dumps" + depends on X86_64 || (X86_32 && HIGHMEM) + ---help--- + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel or BIOS using + PHYSICAL_START, or it must be built as a relocatable image + (CONFIG_RELOCATABLE=y). + For more details see Documentation/kdump/kdump.txt + +config KEXEC_JUMP + bool "kexec jump" + depends on KEXEC && HIBERNATION + ---help--- + Jump between original kernel and kexeced kernel and invoke + code in physical address mode via KEXEC + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) + default "0x1000000" + ---help--- + This gives the physical address where the kernel is loaded. + + If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then + bzImage will decompress itself to above physical address and + run from there. Otherwise, bzImage will run from the address where + it has been loaded by the boot loader and will ignore above physical + address. + + In normal kdump cases one does not have to set/change this option + as now bzImage can be compiled as a completely relocatable image + (CONFIG_RELOCATABLE=y) and be used to load and run from a different + address. This option is mainly useful for the folks who don't want + to use a bzImage for capturing the crash dump and want to use a + vmlinux instead. vmlinux is not relocatable hence a kernel needs + to be specifically compiled to run from a specific memory area + (normally a reserved region) and this option comes handy. + + So if you are using bzImage for capturing the crash dump, + leave the value here unchanged to 0x1000000 and set + CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux + for capturing the crash dump change this value to start of + the reserved region. In other words, it can be set based on + the "X" value as specified in the "crashkernel=YM@XM" + command line boot parameter passed to the panic-ed + kernel. Please take a look at Documentation/kdump/kdump.txt + for more details about crash dumps. + + Usage of bzImage for capturing the crash dump is recommended as + one does not have to build two kernels. Same kernel can be used + as production kernel and capture kernel. Above option should have + gone away after relocatable bzImage support is introduced. But it + is present because there are users out there who continue to use + vmlinux for dump capture. This option should go away down the + line. + + Don't change this unless you know what you are doing. + +config RELOCATABLE + bool "Build a relocatable kernel" + default y + ---help--- + This builds a kernel image that retains relocation information + so it can be loaded someplace besides the default 1MB. + The relocations tend to make the kernel binary about 10% larger, + but are discarded at runtime. + + One use is for the kexec on panic case where the recovery kernel + must live at a different physical address than the primary + kernel. + + Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address + it has been loaded at and the compile time physical address + (CONFIG_PHYSICAL_START) is used as the minimum location. + +config RANDOMIZE_BASE + bool "Randomize the address of the kernel image" + depends on RELOCATABLE + default n + ---help--- + Randomizes the physical and virtual address at which the + kernel image is decompressed, as a security feature that + deters exploit attempts relying on knowledge of the location + of kernel internals. + + Entropy is generated using the RDRAND instruction if it is + supported. If RDTSC is supported, it is used as well. If + neither RDRAND nor RDTSC are supported, then randomness is + read from the i8254 timer. + + The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET, + and aligned according to PHYSICAL_ALIGN. Since the kernel is + built using 2GiB addressing, and PHYSICAL_ALGIN must be at a + minimum of 2MiB, only 10 bits of entropy is theoretically + possible. At best, due to page table layouts, 64-bit can use + 9 bits of entropy and 32-bit uses 8 bits. + + If unsure, say N. + +config RANDOMIZE_BASE_MAX_OFFSET + hex "Maximum kASLR offset allowed" if EXPERT + depends on RANDOMIZE_BASE + range 0x0 0x20000000 if X86_32 + default "0x20000000" if X86_32 + range 0x0 0x40000000 if X86_64 + default "0x40000000" if X86_64 + ---help--- + The lesser of RANDOMIZE_BASE_MAX_OFFSET and available physical + memory is used to determine the maximal offset in bytes that will + be applied to the kernel when kernel Address Space Layout + Randomization (kASLR) is active. This must be a multiple of + PHYSICAL_ALIGN. + + On 32-bit this is limited to 512MiB by page table layouts. The + default is 512MiB. + + On 64-bit this is limited by how the kernel fixmap page table is + positioned, so this cannot be larger than 1GiB currently. Without + RANDOMIZE_BASE, there is a 512MiB to 1.5GiB split between kernel + and modules. When RANDOMIZE_BASE_MAX_OFFSET is above 512MiB, the + modules area will shrink to compensate, up to the current maximum + 1GiB to 1GiB split. The default is 1GiB. + + If unsure, leave at the default value. + +# Relocation on x86 needs some additional build support +config X86_NEED_RELOCS + def_bool y + depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE) + +config PHYSICAL_ALIGN + hex "Alignment value to which kernel should be aligned" + default "0x200000" + range 0x2000 0x1000000 if X86_32 + range 0x200000 0x1000000 if X86_64 + ---help--- + This value puts the alignment restrictions on physical address + where kernel is loaded and run from. Kernel is compiled for an + address which meets above alignment restriction. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is set, kernel will move itself to nearest + address aligned to above value and run from there. + + If bootloader loads the kernel at a non-aligned address and + CONFIG_RELOCATABLE is not set, kernel will ignore the run time + load address and decompress itself to the address it has been + compiled for and run from there. The address for which kernel is + compiled already meets above alignment restrictions. Hence the + end result is that kernel runs from a physical address meeting + above alignment restrictions. + + On 32-bit this value must be a multiple of 0x2000. On 64-bit + this value must be a multiple of 0x200000. + + Don't change this unless you know what you are doing. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs" + depends on SMP + ---help--- + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu. + ( Note: power management support will enable this option + automatically on SMP systems. ) + Say N if you want to disable CPU hotplug. + +config BOOTPARAM_HOTPLUG_CPU0 + bool "Set default setting of cpu0_hotpluggable" + default n + depends on HOTPLUG_CPU + ---help--- + Set whether default state of cpu0_hotpluggable is on or off. + + Say Y here to enable CPU0 hotplug by default. If this switch + is turned on, there is no need to give cpu0_hotplug kernel + parameter and the CPU0 hotplug feature is enabled by default. + + Please note: there are two known CPU0 dependencies if you want + to enable the CPU0 hotplug feature either by this switch or by + cpu0_hotplug kernel parameter. + + First, resume from hibernate or suspend always starts from CPU0. + So hibernate and suspend are prevented if CPU0 is offline. + + Second dependency is PIC interrupts always go to CPU0. CPU0 can not + offline if any interrupt can not migrate out of CPU0. There may + be other CPU0 dependencies. + + Please make sure the dependencies are under your control before + you enable this feature. + + Say N if you don't want to enable CPU0 hotplug feature by default. + You still can enable the CPU0 hotplug feature at boot by kernel + parameter cpu0_hotplug. + +config DEBUG_HOTPLUG_CPU0 + def_bool n + prompt "Debug CPU0 hotplug" + depends on HOTPLUG_CPU + ---help--- + Enabling this option offlines CPU0 (if CPU0 can be offlined) as + soon as possible and boots up userspace with CPU0 offlined. User + can online CPU0 back after boot time. + + To debug CPU0 hotplug, you need to enable CPU0 offline/online + feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during + compilation or giving cpu0_hotplug kernel parameter at boot. + + If unsure, say N. + +config COMPAT_VDSO + def_bool n + prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" + depends on X86_32 || IA32_EMULATION + ---help--- + Certain buggy versions of glibc will crash if they are + presented with a 32-bit vDSO that is not mapped at the address + indicated in its segment table. + + The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a + and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and + 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is + the only released version with the bug, but OpenSUSE 9 + contains a buggy "glibc 2.3.2". + + The symptom of the bug is that everything crashes on startup, saying: + dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed! + + Saying Y here changes the default value of the vdso32 boot + option from 1 to 0, which turns off the 32-bit vDSO entirely. + This works around the glibc bug but hurts performance. + + If unsure, say N: if you are compiling your own kernel, you + are unlikely to be using a buggy version of glibc. + +config CMDLINE_BOOL + bool "Built-in kernel command line" + ---help--- + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (i.e. non-embedded) + should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + ---help--- + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + depends on CMDLINE_BOOL + ---help--- + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + +source "kernel/livepatch/Kconfig" + +endmenu + +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y + depends on X86_64 || (X86_32 && HIGHMEM) + +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + depends on MEMORY_HOTPLUG + +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config ARCH_ENABLE_SPLIT_PMD_PTLOCK + def_bool y + depends on X86_64 || X86_PAE + +config ARCH_ENABLE_HUGEPAGE_MIGRATION + def_bool y + depends on X86_64 && HUGETLB_PAGE && MIGRATION + +menu "Power management and ACPI options" + +config ARCH_HIBERNATION_HEADER + def_bool y + depends on X86_64 && HIBERNATION + +source "kernel/power/Kconfig" + +source "drivers/acpi/Kconfig" + +source "drivers/sfi/Kconfig" + +config X86_APM_BOOT + def_bool y + depends on APM + +menuconfig APM + tristate "APM (Advanced Power Management) BIOS support" + depends on X86_32 && PM_SLEEP + ---help--- + APM is a BIOS specification for saving power using several different + techniques. This is mostly useful for battery powered laptops with + APM compliant BIOSes. If you say Y here, the system time will be + reset after a RESUME operation, the /proc/apm device will provide + battery status information, and user-space programs will receive + notification of APM "events" (e.g. battery status change). + + If you select "Y" here, you can disable actual use of the APM + BIOS by passing the "apm=off" option to the kernel at boot time. + + Note that the APM support is almost completely disabled for + machines with more than one CPU. + + In order to use APM, you will need supporting software. For location + and more information, read + and the Battery Powered Linux mini-HOWTO, available from + . + + This driver does not spin down disk drives (see the hdparm(8) + manpage ("man 8 hdparm") for that), and it doesn't turn off + VESA-compliant "green" monitors. + + This driver does not support the TI 4000M TravelMate and the ACER + 486/DX4/75 because they don't have compliant BIOSes. Many "green" + desktop machines also don't have compliant BIOSes, and this driver + may cause those machines to panic during the boot phase. + + Generally, if you don't have a battery in your machine, there isn't + much point in using this driver and you should say N. If you get + random kernel OOPSes or reboots that don't seem to be related to + anything, try disabling/enabling this option (or disabling/enabling + APM in your BIOS). + + Some other things you should try when experiencing seemingly random, + "weird" problems: + + 1) make sure that you have enough swap space and that it is + enabled. + 2) pass the "no-hlt" option to the kernel + 3) switch on floating point emulation in the kernel and pass + the "no387" option to the kernel + 4) pass the "floppy=nodma" option to the kernel + 5) pass the "mem=4M" option to the kernel (thereby disabling + all but the first 4 MB of RAM) + 6) make sure that the CPU is not over clocked. + 7) read the sig11 FAQ at + 8) disable the cache from your BIOS settings + 9) install a fan for the video card or exchange video RAM + 10) install a better fan for the CPU + 11) exchange RAM chips + 12) exchange the motherboard. + + To compile this driver as a module, choose M here: the + module will be called apm. + +if APM + +config APM_IGNORE_USER_SUSPEND + bool "Ignore USER SUSPEND" + ---help--- + This option will ignore USER SUSPEND requests. On machines with a + compliant APM BIOS, you want to say N. However, on the NEC Versa M + series notebooks, it is necessary to say Y because of a BIOS bug. + +config APM_DO_ENABLE + bool "Enable PM at boot time" + ---help--- + Enable APM features at boot time. From page 36 of the APM BIOS + specification: "When disabled, the APM BIOS does not automatically + power manage devices, enter the Standby State, enter the Suspend + State, or take power saving steps in response to CPU Idle calls." + This driver will make CPU Idle calls when Linux is idle (unless this + feature is turned off -- see "Do CPU IDLE calls", below). This + should always save battery power, but more complicated APM features + will be dependent on your BIOS implementation. You may need to turn + this option off if your computer hangs at boot time when using APM + support, or if it beeps continuously instead of suspending. Turn + this off if you have a NEC UltraLite Versa 33/C or a Toshiba + T400CDT. This is off by default since most machines do fine without + this feature. + +config APM_CPU_IDLE + depends on CPU_IDLE + bool "Make CPU Idle calls when idle" + ---help--- + Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. + On some machines, this can activate improved power savings, such as + a slowed CPU clock rate, when the machine is idle. These idle calls + are made after the idle loop has run for some length of time (e.g., + 333 mS). On some machines, this will cause a hang at boot time or + whenever the CPU becomes idle. (On machines with more than one CPU, + this option does nothing.) + +config APM_DISPLAY_BLANK + bool "Enable console blanking using APM" + ---help--- + Enable console blanking using the APM. Some laptops can use this to + turn off the LCD backlight when the screen blanker of the Linux + virtual console blanks the screen. Note that this is only used by + the virtual console screen blanker, and won't turn off the backlight + when using the X Window system. This also doesn't have anything to + do with your VESA-compliant power-saving monitor. Further, this + option doesn't work for all laptops -- it might not turn off your + backlight at all, or it might print a lot of errors to the console, + especially if you are using gpm. + +config APM_ALLOW_INTS + bool "Allow interrupts during APM BIOS calls" + ---help--- + Normally we disable external interrupts while we are making calls to + the APM BIOS as a measure to lessen the effects of a badly behaving + BIOS implementation. The BIOS should reenable interrupts if it + needs to. Unfortunately, some BIOSes do not -- especially those in + many of the newer IBM Thinkpads. If you experience hangs when you + suspend, try setting this to Y. Otherwise, say N. + +endif # APM + +source "drivers/cpufreq/Kconfig" + +source "drivers/cpuidle/Kconfig" + +source "drivers/idle/Kconfig" + +endmenu + + +menu "Bus options (PCI etc.)" + +config PCI + bool "PCI support" + default y + ---help--- + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +choice + prompt "PCI access mode" + depends on X86_32 && PCI + default PCI_GOANY + ---help--- + On PCI systems, the BIOS can be used to detect the PCI devices and + determine their configuration. However, some old PCI motherboards + have BIOS bugs and may crash if this is done. Also, some embedded + PCI-based systems don't have any BIOS at all. Linux can also try to + detect the PCI hardware directly without using the BIOS. + + With this option, you can specify how Linux should detect the + PCI devices. If you choose "BIOS", the BIOS will be used, + if you choose "Direct", the BIOS won't be used, and if you + choose "MMConfig", then PCI Express MMCONFIG will be used. + If you choose "Any", the kernel will try MMCONFIG, then the + direct access method and falls back to the BIOS if that doesn't + work. If unsure, go with the default, which is "Any". + +config PCI_GOBIOS + bool "BIOS" + +config PCI_GOMMCONFIG + bool "MMConfig" + +config PCI_GODIRECT + bool "Direct" + +config PCI_GOOLPC + bool "OLPC XO-1" + depends on OLPC + +config PCI_GOANY + bool "Any" + +endchoice + +config PCI_BIOS + def_bool y + depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) + +# x86-64 doesn't support PCI BIOS access from long mode so always go direct. +config PCI_DIRECT + def_bool y + depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG)) + +config PCI_MMCONFIG + def_bool y + depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY) + +config PCI_OLPC + def_bool y + depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) + +config PCI_XEN + def_bool y + depends on PCI && XEN + select SWIOTLB_XEN + +config PCI_DOMAINS + def_bool y + depends on PCI + +config PCI_MMCONFIG + bool "Support mmconfig PCI config space access" + depends on X86_64 && PCI && ACPI + +config PCI_CNB20LE_QUIRK + bool "Read CNB20LE Host Bridge Windows" if EXPERT + depends on PCI + help + Read the PCI windows out of the CNB20LE host bridge. This allows + PCI hotplug to work on systems with the CNB20LE chipset which do + not have ACPI. + + There's no public spec for this chipset, and this functionality + is known to be incomplete. + + You should say N unless you know you need this. + +source "drivers/pci/pcie/Kconfig" + +source "drivers/pci/Kconfig" + +# x86_64 have no ISA slots, but can have ISA-style DMA. +config ISA_DMA_API + bool "ISA-style DMA support" if (X86_64 && EXPERT) + default y + help + Enables ISA-style DMA support for devices requiring such controllers. + If unsure, say Y. + +if X86_32 + +config ISA + bool "ISA support" + ---help--- + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config EISA + bool "EISA support" + depends on ISA + ---help--- + The Extended Industry Standard Architecture (EISA) bus was + developed as an open alternative to the IBM MicroChannel bus. + + The EISA bus provided some of the features of the IBM MicroChannel + bus while maintaining backward compatibility with cards made for + the older ISA bus. The EISA bus saw limited use between 1988 and + 1995 when it was made obsolete by the PCI bus. + + Say Y here if you are building a kernel for an EISA-based machine. + + Otherwise, say N. + +source "drivers/eisa/Kconfig" + +config SCx200 + tristate "NatSemi SCx200 support" + ---help--- + This provides basic support for National Semiconductor's + (now AMD's) Geode processors. The driver probes for the + PCI-IDs of several on-chip devices, so its a good dependency + for other scx200_* drivers. + + If compiled as a module, the driver is named scx200. + +config SCx200HR_TIMER + tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" + depends on SCx200 + default y + ---help--- + This driver provides a clocksource built upon the on-chip + 27MHz high-resolution timer. Its also a workaround for + NSC Geode SC-1100's buggy TSC, which loses time when the + processor goes idle (as is done by the scheduler). The + other workaround is idle=poll boot option. + +config OLPC + bool "One Laptop Per Child support" + depends on !X86_PAE + select GPIOLIB + select OF + select OF_PROMTREE + select IRQ_DOMAIN + ---help--- + Add support for detecting the unique features of the OLPC + XO hardware. + +config OLPC_XO1_PM + bool "OLPC XO-1 Power Management" + depends on OLPC && MFD_CS5535 && PM_SLEEP + select MFD_CORE + ---help--- + Add support for poweroff and suspend of the OLPC XO-1 laptop. + +config OLPC_XO1_RTC + bool "OLPC XO-1 Real Time Clock" + depends on OLPC_XO1_PM && RTC_DRV_CMOS + ---help--- + Add support for the XO-1 real time clock, which can be used as a + programmable wakeup source. + +config OLPC_XO1_SCI + bool "OLPC XO-1 SCI extras" + depends on OLPC && OLPC_XO1_PM + depends on INPUT=y + select POWER_SUPPLY + select GPIO_CS5535 + select MFD_CORE + ---help--- + Add support for SCI-based features of the OLPC XO-1 laptop: + - EC-driven system wakeups + - Power button + - Ebook switch + - Lid switch + - AC adapter status updates + - Battery status updates + +config OLPC_XO15_SCI + bool "OLPC XO-1.5 SCI extras" + depends on OLPC && ACPI + select POWER_SUPPLY + ---help--- + Add support for SCI-based features of the OLPC XO-1.5 laptop: + - EC-driven system wakeups + - AC adapter status updates + - Battery status updates + +config ALIX + bool "PCEngines ALIX System Support (LED setup)" + select GPIOLIB + ---help--- + This option enables system support for the PCEngines ALIX. + At present this just sets up LEDs for GPIO control on + ALIX2/3/6 boards. However, other system specific setup should + get added here. + + Note: You must still enable the drivers for GPIO and LED support + (GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs + + Note: You have to set alix.force=1 for boards with Award BIOS. + +config NET5501 + bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)" + select GPIOLIB + ---help--- + This option enables system support for the Soekris Engineering net5501. + +config GEOS + bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)" + select GPIOLIB + depends on DMI + ---help--- + This option enables system support for the Traverse Technologies GEOS. + +config TS5500 + bool "Technologic Systems TS-5500 platform support" + depends on MELAN + select CHECK_SIGNATURE + select NEW_LEDS + select LEDS_CLASS + ---help--- + This option enables system support for the Technologic Systems TS-5500. + +endif # X86_32 + +config AMD_NB + def_bool y + depends on CPU_SUP_AMD && PCI + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +config RAPIDIO + tristate "RapidIO support" + depends on PCI + default n + help + If enabled this option will include drivers and the core + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + +config X86_SYSFB + bool "Mark VGA/VBE/EFI FB as generic system framebuffer" + help + Firmwares often provide initial graphics framebuffers so the BIOS, + bootloader or kernel can show basic video-output during boot for + user-guidance and debugging. Historically, x86 used the VESA BIOS + Extensions and EFI-framebuffers for this, which are mostly limited + to x86. + This option, if enabled, marks VGA/VBE/EFI framebuffers as generic + framebuffers so the new generic system-framebuffer drivers can be + used on x86. If the framebuffer is not compatible with the generic + modes, it is adverticed as fallback platform framebuffer so legacy + drivers like efifb, vesafb and uvesafb can pick it up. + If this option is not selected, all system framebuffers are always + marked as fallback platform framebuffers as usual. + + Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will + not be able to pick up generic system framebuffers if this option + is selected. You are highly encouraged to enable simplefb as + replacement if you select this option. simplefb can correctly deal + with generic system framebuffers. But you should still keep vesafb + and others enabled as fallback if a system framebuffer is + incompatible with simplefb. + + If unsure, say Y. + +endmenu + + +menu "Executable file formats / Emulations" + +source "fs/Kconfig.binfmt" + +config IA32_EMULATION + bool "IA32 Emulation" + depends on X86_64 + select BINFMT_ELF + select COMPAT_BINFMT_ELF + select HAVE_UID16 + ---help--- + Include code to run legacy 32-bit programs under a + 64-bit kernel. You should likely turn this on, unless you're + 100% sure that you don't have any 32-bit programs left. + +config IA32_AOUT + tristate "IA32 a.out support" + depends on IA32_EMULATION + ---help--- + Support old a.out binaries in the 32bit emulation. + +config X86_X32 + bool "x32 ABI for 64-bit mode" + depends on X86_64 && IA32_EMULATION + ---help--- + Include code to run binaries for the x32 native 32-bit ABI + for 64-bit processors. An x32 process gets access to the + full 64-bit register file and wide data path while leaving + pointers at 32 bits for smaller memory footprint. + + You will need a recent binutils (2.22 or later) with + elf32_x86_64 support enabled to compile a kernel with this + option set. + +config COMPAT + def_bool y + depends on IA32_EMULATION || X86_X32 + select ARCH_WANT_OLD_COMPAT_IPC + +if COMPAT +config COMPAT_FOR_U64_ALIGNMENT + def_bool y + +config SYSVIPC_COMPAT + def_bool y + depends on SYSVIPC + +config KEYS_COMPAT + def_bool y + depends on KEYS +endif + +endmenu + + +config HAVE_ATOMIC_IOMAP + def_bool y + depends on X86_32 + +config X86_DEV_DMA_OPS + bool + depends on X86_64 || STA2X11 + +config X86_DMA_REMAP + bool + depends on STA2X11 + +config PMC_ATOM + def_bool y + depends on PCI + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "drivers/firmware/Kconfig" + +source "fs/Kconfig" + +source "arch/x86/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "arch/x86/kvm/Kconfig" + +source "lib/Kconfig" -- cgit 1.2.3-korg