From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/tile/Kconfig | 473 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 473 insertions(+) create mode 100644 kernel/arch/tile/Kconfig (limited to 'kernel/arch/tile/Kconfig') diff --git a/kernel/arch/tile/Kconfig b/kernel/arch/tile/Kconfig new file mode 100644 index 000000000..a07e31b50 --- /dev/null +++ b/kernel/arch/tile/Kconfig @@ -0,0 +1,473 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. + +config TILE + def_bool y + select HAVE_PERF_EVENTS + select USE_PMC if PERF_EVENTS + select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG + select HAVE_KVM if !TILEGX + select GENERIC_FIND_FIRST_BIT + select SYSCTL_EXCEPTION_TRACE + select CC_OPTIMIZE_FOR_SIZE + select HAVE_DEBUG_KMEMLEAK + select GENERIC_IRQ_PROBE + select GENERIC_PENDING_IRQ if SMP + select GENERIC_IRQ_SHOW + select HAVE_DEBUG_BUGVERBOSE + select VIRT_TO_BUS + select SYS_HYPERVISOR + select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS + select ARCH_HAVE_NMI_SAFE_CMPXCHG + select GENERIC_CLOCKEVENTS + select MODULES_USE_ELF_RELA + select HAVE_ARCH_TRACEHOOK + select HAVE_SYSCALL_TRACEPOINTS + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select HAVE_DEBUG_STACKOVERFLOW + select ARCH_WANT_FRAME_POINTERS + select HAVE_CONTEXT_TRACKING + +# FIXME: investigate whether we need/want these options. +# select HAVE_IOREMAP_PROT +# select HAVE_OPTPROBES +# select HAVE_REGS_AND_STACK_ACCESS_API +# select HAVE_HW_BREAKPOINT +# select PERF_EVENTS +# select HAVE_USER_RETURN_NOTIFIER +# config NO_BOOTMEM +# config ARCH_SUPPORTS_DEBUG_PAGEALLOC +# config HUGETLB_PAGE_SIZE_VARIABLE + +config MMU + def_bool y + +config GENERIC_CSUM + def_bool y + +config HAVE_ARCH_ALLOC_REMAP + def_bool y + +config HAVE_SETUP_PER_CPU_AREA + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y + +config SYS_SUPPORTS_HUGETLBFS + def_bool y + +# Support for additional huge page sizes besides HPAGE_SIZE. +# The software support is currently only present in the TILE-Gx +# hypervisor. TILEPro in any case does not support page sizes +# larger than the default HPAGE_SIZE. +config HUGETLB_SUPER_PAGES + depends on HUGETLB_PAGE && TILEGX + def_bool y + +config GENERIC_TIME_VSYSCALL + def_bool y + +# Enable PMC if PERF_EVENTS, OPROFILE, or WATCHPOINTS are enabled. +config USE_PMC + bool + +# FIXME: tilegx can implement a more efficient rwsem. +config RWSEM_GENERIC_SPINLOCK + def_bool y + +# We only support gcc 4.4 and above, so this should work. +config ARCH_SUPPORTS_OPTIMIZED_INLINING + def_bool y + +config ARCH_PHYS_ADDR_T_64BIT + def_bool y + +config ARCH_DMA_ADDR_T_64BIT + def_bool y + +config NEED_DMA_MAP_STATE + def_bool y + +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + +config LOCKDEP_SUPPORT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + select STACKTRACE + +# We use discontigmem for now; at some point we may want to switch +# to sparsemem (Tilera bug 7996). +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config STRICT_DEVMEM + def_bool y + +# SMP is required for Tilera Linux. +config SMP + def_bool y + +config HVC_TILE + depends on TTY + select HVC_DRIVER + select HVC_IRQ if TILEGX + def_bool y + +config TILEGX + bool "Building for TILE-Gx (64-bit) processor" + select SPARSE_IRQ + select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_ARCH_KGDB + select ARCH_SUPPORTS_ATOMIC_RMW + +config TILEPRO + def_bool !TILEGX + +config 64BIT + def_bool TILEGX + +config ARCH_DEFCONFIG + string + default "arch/tile/configs/tilepro_defconfig" if !TILEGX + default "arch/tile/configs/tilegx_defconfig" if TILEGX + +config PGTABLE_LEVELS + int + default 3 if 64BIT + default 2 + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +menu "Tilera-specific configuration" + +config NR_CPUS + int "Maximum number of tiles (2-255)" + range 2 255 + depends on SMP + default "64" + ---help--- + Building with 64 is the recommended value, but a slightly + smaller kernel memory footprint results from using a smaller + value on chips with fewer tiles. + +if TILEGX + +choice + prompt "Kernel page size" + default PAGE_SIZE_64KB + help + This lets you select the page size of the kernel. For best + performance on memory-intensive applications, a page size of 64KB + is recommended. For workloads involving many small files, many + connections, etc., it may be better to select 16KB, which uses + memory more efficiently at some cost in TLB performance. + + Note that this option is TILE-Gx specific; currently + TILEPro page size is set by rebuilding the hypervisor. + +config PAGE_SIZE_16KB + bool "16KB" + +config PAGE_SIZE_64KB + bool "64KB" + +endchoice + +endif + +source "kernel/Kconfig.hz" + +config KEXEC + bool "kexec system call" + ---help--- + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. It is used + to implement the "mboot" Tilera booter. + + The name comes from the similarity to the exec system call. + +config COMPAT + bool "Support 32-bit TILE-Gx binaries in addition to 64-bit" + depends on TILEGX + select COMPAT_BINFMT_ELF + default y + ---help--- + If enabled, the kernel will support running TILE-Gx binaries + that were built with the -m32 option. + +config SYSVIPC_COMPAT + def_bool y + depends on COMPAT && SYSVIPC + +# We do not currently support disabling HIGHMEM on tilepro. +config HIGHMEM + bool # "Support for more than 512 MB of RAM" + default !TILEGX + ---help--- + Linux can use the full amount of RAM in the system by + default. However, the address space of TILE processors is + only 4 Gigabytes large. That means that, if you have a large + amount of physical memory, not all of it can be "permanently + mapped" by the kernel. The physical memory that's not + permanently mapped is called "high memory". + + If you are compiling a kernel which will never run on a + machine with more than 512 MB total physical RAM, answer + "false" here. This will result in the kernel mapping all of + physical memory into the top 1 GB of virtual memory space. + + If unsure, say "true". + +config ZONE_DMA + def_bool y + +config IOMMU_HELPER + bool + +config NEED_SG_DMA_LENGTH + bool + +config SWIOTLB + bool + default TILEGX + select IOMMU_HELPER + select NEED_SG_DMA_LENGTH + select ARCH_HAS_DMA_SET_COHERENT_MASK + +# We do not currently support disabling NUMA. +config NUMA + bool # "NUMA Memory Allocation and Scheduler Support" + depends on SMP && DISCONTIGMEM + default y + ---help--- + NUMA memory allocation is required for TILE processors + unless booting with memory striping enabled in the + hypervisor, or with only a single memory controller. + It is recommended that this option always be enabled. + +config NODES_SHIFT + int "Log base 2 of the max number of memory controllers" + default 2 + depends on NEED_MULTIPLE_NODES + ---help--- + By default, 2, i.e. 2^2 == 4 DDR2 controllers. + In a system with more controllers, this value should be raised. + +choice + depends on !TILEGX + prompt "Memory split" if EXPERT + default VMSPLIT_3G + ---help--- + Select the desired split between kernel and user memory. + + If the address range available to the kernel is less than the + physical memory installed, the remaining memory will be available + as "high memory". Accessing high memory is a little more costly + than low memory, as it needs to be mapped into the kernel first. + Note that increasing the kernel address space limits the range + available to user programs, making the address space there + tighter. Selecting anything other than the default 3G/1G split + will also likely make your kernel incompatible with binary-only + kernel modules. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_3_75G + bool "3.75G/0.25G user/kernel split (no kernel networking)" + config VMSPLIT_3_5G + bool "3.5G/0.5G user/kernel split" + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_2_75G + bool "2.75G/1.25G user/kernel split (for full 1G low memory)" + config VMSPLIT_2_5G + bool "2.5G/1.5G user/kernel split" + config VMSPLIT_2_25G + bool "2.25G/1.75G user/kernel split" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + depends on !64BIT + default 0xF0000000 if VMSPLIT_3_75G + default 0xE0000000 if VMSPLIT_3_5G + default 0xB0000000 if VMSPLIT_2_75G + default 0xA0000000 if VMSPLIT_2_5G + default 0x90000000 if VMSPLIT_2_25G + default 0x80000000 if VMSPLIT_2G + default 0x40000000 if VMSPLIT_1G + default 0xC0000000 + +source "mm/Kconfig" + +source "kernel/Kconfig.preempt" + +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + ---help--- + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (e.g. mboot, or + if booting over PCI) should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + ---help--- + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + default n + depends on CMDLINE_BOOL + ---help--- + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + +config VMALLOC_RESERVE + hex + default 0x2000000 + +config HARDWALL + bool "Hardwall support to allow access to user dynamic network" + default y + +config KERNEL_PL + int "Processor protection level for kernel" + range 1 2 + default 2 if TILEGX + default 1 if !TILEGX + ---help--- + Since MDE 4.2, the Tilera hypervisor runs the kernel + at PL2 by default. If running under an older hypervisor, + or as a KVM guest, you must run at PL1. (The current + hypervisor may also be recompiled with "make HV_PL=2" to + allow it to run a kernel at PL1, but clients running at PL1 + are not expected to be supported indefinitely.) + + If you're not sure, don't change the default. + +source "arch/tile/gxio/Kconfig" + +endmenu # Tilera-specific configuration + +menu "Bus options" + +config PCI + bool "PCI support" + default y + select PCI_DOMAINS + select GENERIC_PCI_IOMAP + select TILE_GXIO_TRIO if TILEGX + select PCI_MSI if TILEGX + ---help--- + Enable PCI root complex support, so PCIe endpoint devices can + be attached to the Tile chip. Many, but not all, PCI devices + are supported under Tilera's root complex driver. + +config PCI_DOMAINS + bool + +config NO_IOMEM + def_bool !PCI + +config NO_IOPORT_MAP + def_bool !PCI + +config TILE_PCI_IO + bool "PCI I/O space support" + default n + depends on PCI + depends on TILEGX + ---help--- + Enable PCI I/O space support on TILEGx. Since the PCI I/O space + is used by few modern PCIe endpoint devices, its support is disabled + by default to save the TRIO PIO Region resource for other purposes. + +source "drivers/pci/Kconfig" + +source "drivers/pci/pcie/Kconfig" + +config TILE_USB + tristate "Tilera USB host adapter support" + default y + depends on USB + depends on TILEGX + select TILE_GXIO_USB_HOST + ---help--- + Provides USB host adapter support for the built-in EHCI and OHCI + interfaces on TILE-Gx chips. + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/tile/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + +source "arch/tile/kvm/Kconfig" -- cgit 1.2.3-korg