From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/powerpc/platforms/52xx/Kconfig | 61 ++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 kernel/arch/powerpc/platforms/52xx/Kconfig (limited to 'kernel/arch/powerpc/platforms/52xx/Kconfig') diff --git a/kernel/arch/powerpc/platforms/52xx/Kconfig b/kernel/arch/powerpc/platforms/52xx/Kconfig new file mode 100644 index 000000000..b625a2c6f --- /dev/null +++ b/kernel/arch/powerpc/platforms/52xx/Kconfig @@ -0,0 +1,61 @@ +config PPC_MPC52xx + bool "52xx-based boards" + depends on 6xx + select COMMON_CLK + select PPC_PCI_CHOICE + +config PPC_MPC5200_SIMPLE + bool "Generic support for simple MPC5200 based boards" + depends on PPC_MPC52xx + select DEFAULT_UIMAGE + help + This option enables support for a simple MPC52xx based boards which + do not need a custom platform specific setup. Such boards are + supported assuming the following: + + - GPIO pins are configured by the firmware, + - CDM configuration (clocking) is setup correctly by firmware, + - if the 'fsl,has-wdt' property is present in one of the + gpt nodes, then it is safe to use such gpt to reset the board, + - PCI is supported if enabled in the kernel configuration + and if there is a PCI bus node defined in the device tree. + + Boards that are compatible with this generic platform support + are: + intercontrol,digsy-mtc + phytec,pcm030 + phytec,pcm032 + promess,motionpro + schindler,cm5200 + tqc,tqm5200 + +config PPC_EFIKA + bool "bPlan Efika 5k2. MPC5200B based computer" + depends on PPC_MPC52xx + select PPC_RTAS + select RTAS_PROC + select PPC_NATIVE + +config PPC_LITE5200 + bool "Freescale Lite5200 Eval Board" + depends on PPC_MPC52xx + select DEFAULT_UIMAGE + +config PPC_MEDIA5200 + bool "Freescale Media5200 Eval Board" + depends on PPC_MPC52xx + select DEFAULT_UIMAGE + +config PPC_MPC5200_BUGFIX + bool "MPC5200 (L25R) bugfix support" + depends on PPC_MPC52xx + help + Enable workarounds for original MPC5200 errata. This is not required + for MPC5200B based boards. + + It is safe to say 'Y' here + +config PPC_MPC5200_LPBFIFO + tristate "MPC5200 LocalPlus bus FIFO driver" + depends on PPC_MPC52xx && PPC_BESTCOMM + select PPC_BESTCOMM_GEN_BD -- cgit 1.2.3-korg