From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/arch/mips/sibyte/Kconfig | 21 ++++++++------------- kernel/arch/mips/sibyte/bcm1480/smp.c | 9 +++++---- kernel/arch/mips/sibyte/common/bus_watcher.c | 7 ++----- kernel/arch/mips/sibyte/sb1250/setup.c | 2 -- kernel/arch/mips/sibyte/sb1250/smp.c | 7 +++++-- 5 files changed, 20 insertions(+), 26 deletions(-) (limited to 'kernel/arch/mips/sibyte') diff --git a/kernel/arch/mips/sibyte/Kconfig b/kernel/arch/mips/sibyte/Kconfig index 5fbd3605d..cb9a095f5 100644 --- a/kernel/arch/mips/sibyte/Kconfig +++ b/kernel/arch/mips/sibyte/Kconfig @@ -3,7 +3,7 @@ config SIBYTE_SB1250 select CEVT_SB1250 select CSRC_SB1250 select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_ENABLE_LDT_IF_PCI select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC @@ -13,7 +13,7 @@ config SIBYTE_BCM1120 bool select CEVT_SB1250 select CSRC_SB1250 - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC @@ -23,7 +23,7 @@ config SIBYTE_BCM1125 select CEVT_SB1250 select CSRC_SB1250 select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC @@ -33,7 +33,7 @@ config SIBYTE_BCM1125H select CEVT_SB1250 select CSRC_SB1250 select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_ENABLE_LDT_IF_PCI select SIBYTE_HAS_ZBUS_PROFILING @@ -43,7 +43,7 @@ config SIBYTE_BCM112X bool select CEVT_SB1250 select CSRC_SB1250 - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_SB1xxx_SOC select SIBYTE_HAS_ZBUS_PROFILING @@ -52,7 +52,7 @@ config SIBYTE_BCM1x80 select CEVT_BCM1480 select CSRC_BCM1480 select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC select SYS_SUPPORTS_SMP @@ -62,7 +62,7 @@ config SIBYTE_BCM1x55 select CEVT_BCM1480 select CSRC_BCM1480 select HW_HAS_PCI - select IRQ_CPU + select IRQ_MIPS_CPU select SIBYTE_SB1xxx_SOC select SIBYTE_HAS_ZBUS_PROFILING select SYS_SUPPORTS_SMP @@ -70,7 +70,7 @@ config SIBYTE_BCM1x55 config SIBYTE_SB1xxx_SOC bool select DMA_COHERENT - select IRQ_CPU + select IRQ_MIPS_CPU select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -81,11 +81,6 @@ choice prompt "SiByte SOC Stepping" depends on SIBYTE_SB1xxx_SOC -config CPU_SB1_PASS_1 - bool "1250 Pass1" - depends on SIBYTE_SB1250 - select CPU_HAS_PREFETCH - config CPU_SB1_PASS_2_1250 bool "1250 An" depends on SIBYTE_SB1250 diff --git a/kernel/arch/mips/sibyte/bcm1480/smp.c b/kernel/arch/mips/sibyte/bcm1480/smp.c index af7d44edd..4c71aea25 100644 --- a/kernel/arch/mips/sibyte/bcm1480/smp.c +++ b/kernel/arch/mips/sibyte/bcm1480/smp.c @@ -29,8 +29,6 @@ #include #include -extern void smp_call_function_interrupt(void); - /* * These are routines for dealing with the bcm1480 smp capabilities * independent of board/firmware @@ -184,6 +182,9 @@ void bcm1480_mailbox_interrupt(void) if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); - if (action & SMP_CALL_FUNCTION) - smp_call_function_interrupt(); + if (action & SMP_CALL_FUNCTION) { + irq_enter(); + generic_smp_call_function_interrupt(); + irq_exit(); + } } diff --git a/kernel/arch/mips/sibyte/common/bus_watcher.c b/kernel/arch/mips/sibyte/common/bus_watcher.c index 5581844c9..a4e55999e 100644 --- a/kernel/arch/mips/sibyte/common/bus_watcher.c +++ b/kernel/arch/mips/sibyte/common/bus_watcher.c @@ -81,10 +81,7 @@ void check_bus_watcher(void) { u32 status, l2_err, memio_err; -#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS - /* Destructive read, clears register and interrupt */ - status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); -#elif defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) +#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) /* Use non-destructive register */ status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG)); #elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) @@ -253,4 +250,4 @@ int __init sibyte_bus_watcher(void) return 0; } -__initcall(sibyte_bus_watcher); +device_initcall(sibyte_bus_watcher); diff --git a/kernel/arch/mips/sibyte/sb1250/setup.c b/kernel/arch/mips/sibyte/sb1250/setup.c index 3c02b2a77..9d3c24efd 100644 --- a/kernel/arch/mips/sibyte/sb1250/setup.c +++ b/kernel/arch/mips/sibyte/sb1250/setup.c @@ -202,12 +202,10 @@ void __init sb1250_setup(void) switch (war_pass) { case K_SYS_REVISION_BCM1250_PASS1: -#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " "and the kernel doesn't have the proper " "workarounds compiled in. @@@@\n"); bad_config = 1; -#endif break; case K_SYS_REVISION_BCM1250_PASS2: /* Pass 2 - easiest as default for now - so many numbers */ diff --git a/kernel/arch/mips/sibyte/sb1250/smp.c b/kernel/arch/mips/sibyte/sb1250/smp.c index c0c4b3f88..1cf66f5ff 100644 --- a/kernel/arch/mips/sibyte/sb1250/smp.c +++ b/kernel/arch/mips/sibyte/sb1250/smp.c @@ -172,6 +172,9 @@ void sb1250_mailbox_interrupt(void) if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); - if (action & SMP_CALL_FUNCTION) - smp_call_function_interrupt(); + if (action & SMP_CALL_FUNCTION) { + irq_enter(); + generic_smp_call_function_interrupt(); + irq_exit(); + } } -- cgit 1.2.3-korg