From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 94 ++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 kernel/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h (limited to 'kernel/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h') diff --git a/kernel/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/kernel/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h new file mode 100644 index 000000000..133336b49 --- /dev/null +++ b/kernel/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -0,0 +1,94 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin + */ + +#ifndef _LTQ_XWAY_H__ +#define _LTQ_XWAY_H__ + +#ifdef CONFIG_SOC_TYPE_XWAY + +#include + +/* Chip IDs */ +#define SOC_ID_DANUBE1 0x129 +#define SOC_ID_DANUBE2 0x12B +#define SOC_ID_TWINPASS 0x12D +#define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */ +#define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */ +#define SOC_ID_ARX188 0x16C +#define SOC_ID_ARX168_1 0x16D +#define SOC_ID_ARX168_2 0x16E +#define SOC_ID_ARX182 0x16F +#define SOC_ID_GRX188 0x170 +#define SOC_ID_GRX168 0x171 + +#define SOC_ID_VRX288 0x1C0 /* v1.1 */ +#define SOC_ID_VRX282 0x1C1 /* v1.1 */ +#define SOC_ID_VRX268 0x1C2 /* v1.1 */ +#define SOC_ID_GRX268 0x1C8 /* v1.1 */ +#define SOC_ID_GRX288 0x1C9 /* v1.1 */ +#define SOC_ID_VRX288_2 0x00B /* v1.2 */ +#define SOC_ID_VRX268_2 0x00C /* v1.2 */ +#define SOC_ID_GRX288_2 0x00D /* v1.2 */ +#define SOC_ID_GRX282_2 0x00E /* v1.2 */ + + /* SoC Types */ +#define SOC_TYPE_DANUBE 0x01 +#define SOC_TYPE_TWINPASS 0x02 +#define SOC_TYPE_AR9 0x03 +#define SOC_TYPE_VR9 0x04 /* v1.1 */ +#define SOC_TYPE_VR9_2 0x05 /* v1.2 */ +#define SOC_TYPE_AMAZON_SE 0x06 + +/* BOOT_SEL - find what boot media we have */ +#define BS_EXT_ROM 0x0 +#define BS_FLASH 0x1 +#define BS_MII0 0x2 +#define BS_PCI 0x3 +#define BS_UART1 0x4 +#define BS_SPI 0x5 +#define BS_NAND 0x6 +#define BS_RMII0 0x7 + +/* helpers used to access the cgu */ +#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) +#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) +extern __iomem void *ltq_cgu_membase; + +/* + * during early_printk no ioremap is possible + * lets use KSEG1 instead + */ +#define LTQ_ASC1_BASE_ADDR 0x1E100C00 +#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR) + +/* EBU - external bus unit */ +#define LTQ_EBU_BUSCON0 0x0060 +#define LTQ_EBU_PCC_CON 0x0090 +#define LTQ_EBU_PCC_IEN 0x00A4 +#define LTQ_EBU_PCC_ISTAT 0x00A0 +#define LTQ_EBU_BUSCON1 0x0064 +#define LTQ_EBU_ADDRSEL1 0x0024 +#define EBU_WRDIS 0x80000000 + +/* WDT */ +#define LTQ_RST_CAUSE_WDTRST 0x20 + +/* MPS - multi processor unit (voice) */ +#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) +#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) + +/* allow booting xrx200 phys */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); + +/* request a non-gpio and set the PIO config */ +#define PMU_PPE BIT(13) +extern void ltq_pmu_enable(unsigned int module); +extern void ltq_pmu_disable(unsigned int module); + +#endif /* CONFIG_SOC_TYPE_XWAY */ +#endif /* _LTQ_XWAY_H__ */ -- cgit 1.2.3-korg