From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/blackfin/mach-bf537/boards/stamp.c | 3019 ++++++++++++++++++++++++ 1 file changed, 3019 insertions(+) create mode 100644 kernel/arch/blackfin/mach-bf537/boards/stamp.c (limited to 'kernel/arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/kernel/arch/blackfin/mach-bf537/boards/stamp.c b/kernel/arch/blackfin/mach-bf537/boards/stamp.c new file mode 100644 index 000000000..88a19fc98 --- /dev/null +++ b/kernel/arch/blackfin/mach-bf537/boards/stamp.c @@ -0,0 +1,3019 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE +#include +#endif +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "ADI BF537-STAMP"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) +#include +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SMC91X) +#include + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_DM9000) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x203FB804, + .end = 0x203FB804 + 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_USB_SL811_HCD) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF3, + .end = IRQ_PF3, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_CAN_BFIN) +static unsigned short bfin_can_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can_resources[] = { + { + .start = 0xFFC02A00, + .end = 0xFFC02FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN_RX, + .end = IRQ_CAN_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_TX, + .end = IRQ_CAN_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN_ERROR, + .end = IRQ_CAN_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can_device = { + .name = "bfin_can", + .num_resources = ARRAY_SIZE(bfin_can_resources), + .resource = bfin_can_resources, + .dev = { + .platform_data = &bfin_can_peripherals, /* Passed to driver */ + }, +}; +#endif + +#if IS_ENABLED(CONFIG_BFIN_MAC) +#include +static const unsigned short bfin_mac_peripherals[] = P_MII0; + +static struct bfin_phydev_platform_data bfin_phydev_data[] = { + { + .addr = 1, + .irq = PHY_POLL, /* IRQ_MAC_PHYINT */ + }, +}; + +static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { + .phydev_number = 1, + .phydev_data = bfin_phydev_data, + .phy_mode = PHY_INTERFACE_MODE_MII, + .mac_peripherals = bfin_mac_peripherals, +}; + +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", + .dev = { + .platform_data = &bfin_mii_bus_data, + } +}; + +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", + .dev = { + .platform_data = &bfin_mii_bus, + } +}; +#endif + +#if IS_ENABLED(CONFIG_USB_NET2272) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) +const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "linux kernel(nand)", + .size = 0x400000, + .offset = 0, + }, { + .name = "file system(nand)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 1 +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF3 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x20212000, + .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_MEM, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); + gpio_direction_input(BFIN_NAND_PLAT_READY); +} +#else +static void bfin_plat_nand_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) +static struct mtd_partition stamp_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = 0x400000 - 0x40000 - 0x180000 - 0x10000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "MAC Address(nor)", + .size = MTDPART_SIZ_FULL, + .offset = 0x3F0000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif +}; + +static struct resource stamp_flash_resource = { + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stamp_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = 1, + .resource = &stamp_flash_resource, +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_M25P80) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + /* .type = "m25p64", */ +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ +}; +#endif + +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) +#include + +static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { + { + .start_stage = 0, + .end_stage = 7, + .max_coord = 128, + }, +}; + +static struct ad714x_button_plat ad7147_spi_button_plat[] = { + { + .keycode = BTN_FORWARD, + .l_mask = 0, + .h_mask = 0x600, + }, + { + .keycode = BTN_LEFT, + .l_mask = 0, + .h_mask = 0x500, + }, + { + .keycode = BTN_MIDDLE, + .l_mask = 0, + .h_mask = 0x800, + }, + { + .keycode = BTN_RIGHT, + .l_mask = 0x100, + .h_mask = 0x400, + }, + { + .keycode = BTN_BACK, + .l_mask = 0x200, + .h_mask = 0x400, + }, +}; +static struct ad714x_platform_data ad7147_spi_platform_data = { + .slider_num = 1, + .button_num = 5, + .slider = ad7147_spi_slider_plat, + .button = ad7147_spi_button_plat, + .stage_cfg_reg = { + {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600}, + {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650}, + {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600}, + {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150}, + {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150}, + {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300}, + {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150}, + }, + .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0}, +}; +#endif + +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) +#include +static struct ad714x_button_plat ad7142_i2c_button_plat[] = { + { + .keycode = BTN_1, + .l_mask = 0, + .h_mask = 0x1, + }, + { + .keycode = BTN_2, + .l_mask = 0, + .h_mask = 0x2, + }, + { + .keycode = BTN_3, + .l_mask = 0, + .h_mask = 0x4, + }, + { + .keycode = BTN_4, + .l_mask = 0x0, + .h_mask = 0x8, + }, +}; +static struct ad714x_platform_data ad7142_i2c_platform_data = { + .button_num = 4, + .button = ad7142_i2c_button_plat, + .stage_cfg_reg = { + /* fixme: figure out right setting for all comoponent according + * to hardware feature of EVAL-AD7142EB board */ + {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320}, + }, + .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0}, +}; +#endif + +#if IS_ENABLED(CONFIG_AD2S90) +static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_AD2S1200) +static unsigned short ad2s1200_platform_data[] = { + /* used as SAMPLE and RDVEL */ + GPIO_PF5, GPIO_PF6, 0 +}; + +static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_AD2S1210) +static unsigned short ad2s1210_platform_data[] = { + /* use as SAMPLE, A0, A1 */ + GPIO_PF7, GPIO_PF8, GPIO_PF9, +# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT) + /* the RES0 and RES1 pins */ + GPIO_PF4, GPIO_PF5, +# endif + 0, +}; + +static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_SENSORS_AD7314) +static struct bfin5xx_spi_chip ad7314_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_AD7816) +static unsigned short ad7816_platform_data[] = { + GPIO_PF4, /* rdwr_pin */ + GPIO_PF5, /* convert_pin */ + GPIO_PF7, /* busy_pin */ + 0, +}; + +static struct bfin5xx_spi_chip ad7816_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_ADT7310) +static unsigned long adt7310_platform_data[3] = { +/* INT bound temperature alarm event. line 1 */ + IRQ_PG4, IRQF_TRIGGER_LOW, +/* CT bound temperature alarm event irq_flags. line 0 */ + IRQF_TRIGGER_LOW, +}; + +static struct bfin5xx_spi_chip adt7310_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_AD7298) +static unsigned short ad7298_platform_data[] = { + GPIO_PF7, /* busy_pin */ + 0, +}; +#endif + +#if IS_ENABLED(CONFIG_ADT7316_SPI) +static unsigned long adt7316_spi_data[2] = { + IRQF_TRIGGER_LOW, /* interrupt flags */ + GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ +}; + +static struct bfin5xx_spi_chip adt7316_spi_chip_info = { + .enable_dma = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_MMC_SPI) +#define MMC_SPI_CARD_DETECT_INT IRQ_PF5 + +static int bfin_mmc_spi_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *), void *data) +{ + return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int, + IRQF_TRIGGER_FALLING, "mmc-spi-detect", data); +} + +static void bfin_mmc_spi_exit(struct device *dev, void *data) +{ + free_irq(MMC_SPI_CARD_DETECT_INT, data); +} + +static struct mmc_spi_platform_data bfin_mmc_spi_pdata = { + .init = bfin_mmc_spi_init, + .exit = bfin_mmc_spi_exit, + .detect_delay = 100, /* msecs */ +}; + +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, + .pio_interrupt = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) +#include +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) +#include +static const struct ad7879_platform_data bfin_ad7879_ts_info = { + .model = 7879, /* Model = AD7879 */ + .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ + .pressure_max = 10000, + .pressure_min = 0, + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ + .median = 2, /* do 8 measurements */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ +}; +#endif + +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) +#include +static const struct adxl34x_platform_data adxl34x_info = { + .x_axis_offset = 0, + .y_axis_offset = 0, + .z_axis_offset = 0, + .tap_threshold = 0x31, + .tap_duration = 0x10, + .tap_latency = 0x60, + .tap_window = 0xF0, + .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, + .act_axis_control = 0xFF, + .activity_threshold = 5, + .inactivity_threshold = 3, + .inactivity_time = 4, + .free_fall_threshold = 0x7, + .free_fall_time = 0x20, + .data_rate = 0x8, + .data_range = ADXL_FULL_RES, + + .ev_type = EV_ABS, + .ev_code_x = ABS_X, /* EV_REL */ + .ev_code_y = ABS_Y, /* EV_REL */ + .ev_code_z = ABS_Z, /* EV_REL */ + + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ + +/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ +/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ + .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, + .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, +}; +#endif + +#if IS_ENABLED(CONFIG_ENC28J60) +static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { + .enable_dma = 1, +}; +#endif + +#if IS_ENABLED(CONFIG_ADF702X) +#include +#define TXREG 0x0160A470 +static const u32 adf7021_regs[] = { + 0x09608FA0, + 0x00575011, + 0x00A7F092, + 0x2B141563, + 0x81F29E94, + 0x00003155, + 0x050A4F66, + 0x00000007, + 0x00000008, + 0x000231E9, + 0x3296354A, + 0x891A2B3B, + 0x00000D9C, + 0x0000000D, + 0x0000000E, + 0x0000000F, +}; + +static struct adf702x_platform_data adf7021_platform_data = { + .regs_base = (void *)SPORT1_TCR1, + .dma_ch_rx = CH_SPORT1_RX, + .dma_ch_tx = CH_SPORT1_TX, + .irq_sport_err = IRQ_SPORT1_ERROR, + .gpio_int_rfs = GPIO_PF8, + .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0}, + .adf702x_model = MODEL_ADF7021, + .adf702x_regs = adf7021_regs, + .tx_reg = TXREG, +}; +static inline void adf702x_mac_init(void) +{ + eth_random_addr(adf7021_platform_data.mac_addr); +} +#else +static inline void adf702x_mac_init(void) {} +#endif + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) +#include +static int ads7873_get_pendown_state(void) +{ + return gpio_get_value(GPIO_PF6); +} + +static struct ads7846_platform_data __initdata ad7873_pdata = { + .model = 7873, /* AD7873 */ + .x_max = 0xfff, + .y_max = 0xfff, + .x_plate_ohms = 620, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7873_get_pendown_state, +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) + +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ +}; +#endif + +#if IS_ENABLED(CONFIG_AD7476) +static struct bfin5xx_spi_chip spi_ad7476_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if IS_ENABLED(CONFIG_MTD_M25P80) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_dataflash_data, + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + { + .modalias = "ad1836", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 4, + .platform_data = "ad1836", /* only includes chip name for the moment */ + .mode = SPI_MODE_3, + }, +#endif + +#ifdef CONFIG_SND_SOC_AD193X_SPI + { + .modalias = "ad193x", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) + { + .modalias = "adav801", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) + { + .modalias = "ad714x_captouch", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .irq = IRQ_PF4, + .bus_num = 0, + .chip_select = 5, + .mode = SPI_MODE_3, + .platform_data = &ad7147_spi_platform_data, + }, +#endif + +#if IS_ENABLED(CONFIG_AD2S90) + { + .modalias = "ad2s90", + .bus_num = 0, + .chip_select = 3, /* change it for your board */ + .mode = SPI_MODE_3, + .platform_data = NULL, + .controller_data = &ad2s90_spi_chip_info, + }, +#endif + +#if IS_ENABLED(CONFIG_AD2S1200) + { + .modalias = "ad2s1200", + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s1200_platform_data, + .controller_data = &ad2s1200_spi_chip_info, + }, +#endif + +#if IS_ENABLED(CONFIG_AD2S1210) + { + .modalias = "ad2s1210", + .max_speed_hz = 8192000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s1210_platform_data, + .controller_data = &ad2s1210_spi_chip_info, + }, +#endif + +#if IS_ENABLED(CONFIG_SENSORS_AD7314) + { + .modalias = "ad7314", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .controller_data = &ad7314_spi_chip_info, + .mode = SPI_MODE_1, + }, +#endif + +#if IS_ENABLED(CONFIG_AD7816) + { + .modalias = "ad7818", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad7816_platform_data, + .controller_data = &ad7816_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_ADT7310) + { + .modalias = "adt7310", + .max_speed_hz = 1000000, + .irq = IRQ_PG5, /* CT alarm event. Line 0 */ + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = adt7310_platform_data, + .controller_data = &adt7310_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_AD7298) + { + .modalias = "ad7298", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad7298_platform_data, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_ADT7316_SPI) + { + .modalias = "adt7316", + .max_speed_hz = 1000000, + .irq = IRQ_PG5, /* interrupt line */ + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = adt7316_spi_data, + .controller_data = &adt7316_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if IS_ENABLED(CONFIG_MMC_SPI) + { + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 4, + .platform_data = &bfin_mmc_spi_pdata, + .controller_data = &mmc_spi_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF6, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) + { + .modalias = "ad7879", + .platform_data = &bfin_ad7879_ts_info, + .irq = IRQ_PF7, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +#if IS_ENABLED(CONFIG_SPI_SPIDEV) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + }, +#endif +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) + { + .modalias = "bfin-lq035q1-spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .mode = SPI_CPHA | SPI_CPOL, + }, +#endif +#if IS_ENABLED(CONFIG_ENC28J60) + { + .modalias = "enc28j60", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .irq = IRQ_PF6, + .bus_num = 0, + .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ + .controller_data = &enc28j60_spi_chip_info, + .mode = SPI_MODE_0, + }, +#endif +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PF6, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_ADF702X) + { + .modalias = "adf702x", + .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ + .platform_data = &adf7021_platform_data, + .mode = SPI_MODE_0, + }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) + { + .modalias = "ads7846", + .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .irq = IRQ_PF6, + .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ + .platform_data = &ad7873_pdata, + .mode = SPI_MODE_0, + }, +#endif +#if IS_ENABLED(CONFIG_AD7476) + { + .modalias = "ad7476", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_ad7476_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_ADE7753) + { + .modalias = "ade7753", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if IS_ENABLED(CONFIG_ADE7754) + { + .modalias = "ade7754", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if IS_ENABLED(CONFIG_ADE7758) + { + .modalias = "ade7758", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if IS_ENABLED(CONFIG_ADE7759) + { + .modalias = "ade7759", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if IS_ENABLED(CONFIG_ADE7854_SPI) + { + .modalias = "ade7854", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16060) + { + .modalias = "adis16060_r", + .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_0, + }, + { + .modalias = "adis16060_w", + .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, /* CS for write, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_1, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16130) + { + .modalias = "adis16130", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS for read, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16201) + { + .modalias = "adis16201", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16203) + { + .modalias = "adis16203", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16204) + { + .modalias = "adis16204", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16209) + { + .modalias = "adis16209", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16220) + { + .modalias = "adis16220", + .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16240) + { + .modalias = "adis16240", + .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16260) + { + .modalias = "adis16260", + .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16261) + { + .modalias = "adis16261", + .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16300) + { + .modalias = "adis16300", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16350) + { + .modalias = "adis16364", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + .irq = IRQ_PF4, + }, +#endif +#if IS_ENABLED(CONFIG_ADIS16400) + { + .modalias = "adis16400", + .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, /* CS, change it for your board */ + .platform_data = NULL, /* No spi_driver specific config */ + .mode = SPI_MODE_3, + }, +#endif +}; + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) + +/* SPORT SPI controller data */ +static struct bfin5xx_spi_master bfin_sport_spi0_info = { + .num_chipselect = MAX_BLACKFIN_GPIOS, + .enable_dma = 0, /* master don't support DMA */ + .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI, + P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0}, +}; + +static struct resource bfin_sport_spi0_resource[] = { + [0] = { + .start = SPORT0_TCR1, + .end = SPORT0_TCR1 + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_sport_spi0_device = { + .name = "bfin-sport-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource), + .resource = bfin_sport_spi0_resource, + .dev = { + .platform_data = &bfin_sport_spi0_info, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bfin_sport_spi1_info = { + .num_chipselect = MAX_BLACKFIN_GPIOS, + .enable_dma = 0, /* master don't support DMA */ + .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0}, +}; + +static struct resource bfin_sport_spi1_resource[] = { + [0] = { + .start = SPORT1_TCR1, + .end = SPORT1_TCR1 + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_sport_spi1_device = { + .name = "bfin-sport-spi", + .id = 2, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource), + .resource = bfin_sport_spi1_resource, + .dev = { + .platform_data = &bfin_sport_spi1_info, /* Passed to driver */ + }, +}; + +#endif /* sport spi master and devices */ + +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) +static struct platform_device bfin_fb_device = { + .name = "bf537_lq035", +}; +#endif + +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) +#include + +static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, +}; + +static struct resource bfin_lq035q1_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_lq035q1_device = { + .name = "bfin-lq035q1", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), + .resource = bfin_lq035q1_resources, + .dev = { + .platform_data = &bfin_lq035q1_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) +#include +#include +#include + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_PPI, + .dma_ch = CH_PPI, + .irq_err = IRQ_PPI_ERROR, + .base = (void __iomem *)PPI_CONTROL, + .pin_req = ppi_req, +}; + +#if IS_ENABLED(CONFIG_VIDEO_VS6624) +static struct v4l2_input vs6624_inputs[] = { + { + .index = 0, + .name = "Camera", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_UNKNOWN, + }, +}; + +static struct bcap_route vs6624_routes[] = { + { + .input = 0, + .output = 0, + }, +}; + +static const unsigned vs6624_ce_pin = GPIO_PF10; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF537", + .inputs = vs6624_inputs, + .num_inputs = ARRAY_SIZE(vs6624_inputs), + .routes = vs6624_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "vs6624", + .addr = 0x10, + .platform_data = (void *)&vs6624_ce_pin, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020), +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = UART0_THR, + .end = UART0_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin */ + .start = GPIO_PG7, + .end = GPIO_PG7, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PG6, + .end = GPIO_PG6, + .flags = IORESOURCE_IO, + }, +#endif +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_THR, + .end = UART1_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) +static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { + [0] = KEY_GRAVE, + [1] = KEY_1, + [2] = KEY_2, + [3] = KEY_3, + [4] = KEY_4, + [5] = KEY_5, + [6] = KEY_6, + [7] = KEY_7, + [8] = KEY_8, + [9] = KEY_9, + [10] = KEY_0, + [11] = KEY_MINUS, + [12] = KEY_EQUAL, + [13] = KEY_BACKSLASH, + [15] = KEY_KP0, + [16] = KEY_Q, + [17] = KEY_W, + [18] = KEY_E, + [19] = KEY_R, + [20] = KEY_T, + [21] = KEY_Y, + [22] = KEY_U, + [23] = KEY_I, + [24] = KEY_O, + [25] = KEY_P, + [26] = KEY_LEFTBRACE, + [27] = KEY_RIGHTBRACE, + [29] = KEY_KP1, + [30] = KEY_KP2, + [31] = KEY_KP3, + [32] = KEY_A, + [33] = KEY_S, + [34] = KEY_D, + [35] = KEY_F, + [36] = KEY_G, + [37] = KEY_H, + [38] = KEY_J, + [39] = KEY_K, + [40] = KEY_L, + [41] = KEY_SEMICOLON, + [42] = KEY_APOSTROPHE, + [43] = KEY_BACKSLASH, + [45] = KEY_KP4, + [46] = KEY_KP5, + [47] = KEY_KP6, + [48] = KEY_102ND, + [49] = KEY_Z, + [50] = KEY_X, + [51] = KEY_C, + [52] = KEY_V, + [53] = KEY_B, + [54] = KEY_N, + [55] = KEY_M, + [56] = KEY_COMMA, + [57] = KEY_DOT, + [58] = KEY_SLASH, + [60] = KEY_KPDOT, + [61] = KEY_KP7, + [62] = KEY_KP8, + [63] = KEY_KP9, + [64] = KEY_SPACE, + [65] = KEY_BACKSPACE, + [66] = KEY_TAB, + [67] = KEY_KPENTER, + [68] = KEY_ENTER, + [69] = KEY_ESC, + [70] = KEY_DELETE, + [74] = KEY_KPMINUS, + [76] = KEY_UP, + [77] = KEY_DOWN, + [78] = KEY_RIGHT, + [79] = KEY_LEFT, +}; + +static struct adp5588_kpad_platform_data adp5588_kpad_data = { + .rows = 8, + .cols = 10, + .keymap = adp5588_keymap, + .keymapsize = ARRAY_SIZE(adp5588_keymap), + .repeat = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_PMIC_ADP5520) +#include + + /* + * ADP5520/5501 Backlight Data + */ + +static struct adp5520_backlight_platform_data adp5520_backlight_data = { + .fade_in = ADP5520_FADE_T_1200ms, + .fade_out = ADP5520_FADE_T_1200ms, + .fade_led_law = ADP5520_BL_LAW_LINEAR, + .en_ambl_sens = 1, + .abml_filt = ADP5520_BL_AMBL_FILT_640ms, + .l1_daylight_max = ADP5520_BL_CUR_mA(15), + .l1_daylight_dim = ADP5520_BL_CUR_mA(0), + .l2_office_max = ADP5520_BL_CUR_mA(7), + .l2_office_dim = ADP5520_BL_CUR_mA(0), + .l3_dark_max = ADP5520_BL_CUR_mA(3), + .l3_dark_dim = ADP5520_BL_CUR_mA(0), + .l2_trip = ADP5520_L2_COMP_CURR_uA(700), + .l2_hyst = ADP5520_L2_COMP_CURR_uA(50), + .l3_trip = ADP5520_L3_COMP_CURR_uA(80), + .l3_hyst = ADP5520_L3_COMP_CURR_uA(20), +}; + + /* + * ADP5520/5501 LEDs Data + */ + +static struct led_info adp5520_leds[] = { + { + .name = "adp5520-led1", + .default_trigger = "none", + .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms, + }, +#ifdef ADP5520_EN_ALL_LEDS + { + .name = "adp5520-led2", + .default_trigger = "none", + .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1, + }, + { + .name = "adp5520-led3", + .default_trigger = "none", + .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2, + }, +#endif +}; + +static struct adp5520_leds_platform_data adp5520_leds_data = { + .num_leds = ARRAY_SIZE(adp5520_leds), + .leds = adp5520_leds, + .fade_in = ADP5520_FADE_T_600ms, + .fade_out = ADP5520_FADE_T_600ms, + .led_on_time = ADP5520_LED_ONT_600ms, +}; + + /* + * ADP5520 GPIO Data + */ + +static struct adp5520_gpio_platform_data adp5520_gpio_data = { + .gpio_start = 50, + .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, + .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2, +}; + + /* + * ADP5520 Keypad Data + */ + +static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = { + [ADP5520_KEY(0, 0)] = KEY_GRAVE, + [ADP5520_KEY(0, 1)] = KEY_1, + [ADP5520_KEY(0, 2)] = KEY_2, + [ADP5520_KEY(0, 3)] = KEY_3, + [ADP5520_KEY(1, 0)] = KEY_4, + [ADP5520_KEY(1, 1)] = KEY_5, + [ADP5520_KEY(1, 2)] = KEY_6, + [ADP5520_KEY(1, 3)] = KEY_7, + [ADP5520_KEY(2, 0)] = KEY_8, + [ADP5520_KEY(2, 1)] = KEY_9, + [ADP5520_KEY(2, 2)] = KEY_0, + [ADP5520_KEY(2, 3)] = KEY_MINUS, + [ADP5520_KEY(3, 0)] = KEY_EQUAL, + [ADP5520_KEY(3, 1)] = KEY_BACKSLASH, + [ADP5520_KEY(3, 2)] = KEY_BACKSPACE, + [ADP5520_KEY(3, 3)] = KEY_ENTER, +}; + +static struct adp5520_keys_platform_data adp5520_keys_data = { + .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0, + .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0, + .keymap = adp5520_keymap, + .keymapsize = ARRAY_SIZE(adp5520_keymap), + .repeat = 0, +}; + + /* + * ADP5520/5501 Multifunction Device Init Data + */ + +static struct adp5520_platform_data adp5520_pdev_data = { + .backlight = &adp5520_backlight_data, + .leds = &adp5520_leds_data, + .gpio = &adp5520_gpio_data, + .keys = &adp5520_keys_data, +}; + +#endif + +#if IS_ENABLED(CONFIG_GPIO_ADP5588) +static struct adp5588_gpio_platform_data adp5588_gpio_data = { + .gpio_start = 50, + .pullup_dis_mask = 0, +}; +#endif + +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) +#include +static struct led_info adp8870_leds[] = { + { + .name = "adp8870-led7", + .default_trigger = "none", + .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms, + }, +}; + + +static struct adp8870_backlight_platform_data adp8870_pdata = { + .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 | + ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */ + .pwm_assign = 0, /* 1 = Enables PWM mode */ + + .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */ + .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */ + .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8870_leds, + .num_leds = ARRAY_SIZE(adp8870_leds), + .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8870_FADE_T_600ms, + .led_fade_out = ADP8870_FADE_T_600ms, + .led_on_time = ADP8870_LED_ONT_200ms, +}; +#endif + +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) +#include +static struct led_info adp8860_leds[] = { + { + .name = "adp8860-led7", + .default_trigger = "none", + .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms, + }, +}; + +static struct adp8860_backlight_platform_data adp8860_pdata = { + .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 | + ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */ + + .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8860_leds, + .num_leds = ARRAY_SIZE(adp8860_leds), + .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8860_FADE_T_600ms, + .led_fade_out = ADP8860_FADE_T_600ms, + .led_on_time = ADP8860_LED_ONT_200ms, +}; +#endif + +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) +static struct regulator_consumer_supply ad5398_consumer = { + .supply = "current", +}; + +static struct regulator_init_data ad5398_regulator_data = { + .constraints = { + .name = "current range", + .max_uA = 120000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ad5398_consumer, +}; + +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) +static struct platform_device ad5398_virt_consumer_device = { + .name = "reg-virt-consumer", + .id = 0, + .dev = { + .platform_data = "current", /* Passed to driver */ + }, +}; +#endif +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) +static struct regulator_bulk_data ad5398_bulk_data = { + .supply = "current", +}; + +static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = { + .name = "ad5398", + .num_supplies = 1, + .supplies = &ad5398_bulk_data, +}; + +static struct platform_device ad5398_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &ad5398_userspace_comsumer_data, + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_ADT7410) +/* INT bound temperature alarm event. line 1 */ +static unsigned long adt7410_platform_data[2] = { + IRQ_PG4, IRQF_TRIGGER_LOW, +}; +#endif + +#if IS_ENABLED(CONFIG_ADT7316_I2C) +/* INT bound temperature alarm event. line 1 */ +static unsigned long adt7316_i2c_data[2] = { + IRQF_TRIGGER_LOW, /* interrupt flags */ + GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ +}; +#endif + +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#ifdef CONFIG_SND_SOC_AD193X_I2C + { + I2C_BOARD_INFO("ad1937", 0x04), + }, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) + { + I2C_BOARD_INFO("adav803", 0x10), + }, +#endif + +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) + { + I2C_BOARD_INFO("ad7142_captouch", 0x2C), + .irq = IRQ_PG5, + .platform_data = (void *)&ad7142_i2c_platform_data, + }, +#endif + +#if IS_ENABLED(CONFIG_AD7150) + { + I2C_BOARD_INFO("ad7150", 0x48), + .irq = IRQ_PG5, /* fixme: use real interrupt number */ + }, +#endif + +#if IS_ENABLED(CONFIG_AD7152) + { + I2C_BOARD_INFO("ad7152", 0x48), + }, +#endif + +#if IS_ENABLED(CONFIG_AD774X) + { + I2C_BOARD_INFO("ad774x", 0x48), + }, +#endif + +#if IS_ENABLED(CONFIG_ADE7854_I2C) + { + I2C_BOARD_INFO("ade7854", 0x38), + }, +#endif + +#if IS_ENABLED(CONFIG_SENSORS_LM75) + { + I2C_BOARD_INFO("adt75", 0x9), + .irq = IRQ_PG5, + }, +#endif + +#if IS_ENABLED(CONFIG_ADT7410) + { + I2C_BOARD_INFO("adt7410", 0x48), + /* CT critical temperature event. line 0 */ + .irq = IRQ_PG5, + .platform_data = (void *)&adt7410_platform_data, + }, +#endif + +#if IS_ENABLED(CONFIG_AD7291) + { + I2C_BOARD_INFO("ad7291", 0x20), + .irq = IRQ_PG5, + }, +#endif + +#if IS_ENABLED(CONFIG_ADT7316_I2C) + { + I2C_BOARD_INFO("adt7316", 0x48), + .irq = IRQ_PG6, + .platform_data = (void *)&adt7316_i2c_data, + }, +#endif + +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + }, +#endif +#if IS_ENABLED(CONFIG_INPUT_PCF8574) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .irq = IRQ_PG6, + }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) + { + I2C_BOARD_INFO("ad7879", 0x2F), + .irq = IRQ_PG5, + .platform_data = (void *)&bfin_ad7879_ts_info, + }, +#endif +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) + { + I2C_BOARD_INFO("adp5588-keys", 0x34), + .irq = IRQ_PG0, + .platform_data = (void *)&adp5588_kpad_data, + }, +#endif +#if IS_ENABLED(CONFIG_PMIC_ADP5520) + { + I2C_BOARD_INFO("pmic-adp5520", 0x32), + .irq = IRQ_PG0, + .platform_data = (void *)&adp5520_pdev_data, + }, +#endif +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) + { + I2C_BOARD_INFO("adxl34x", 0x53), + .irq = IRQ_PG3, + .platform_data = (void *)&adxl34x_info, + }, +#endif +#if IS_ENABLED(CONFIG_GPIO_ADP5588) + { + I2C_BOARD_INFO("adp5588-gpio", 0x34), + .platform_data = (void *)&adp5588_gpio_data, + }, +#endif +#if IS_ENABLED(CONFIG_FB_BFIN_7393) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, +#endif +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) + { + I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F), + }, +#endif +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) + { + I2C_BOARD_INFO("adp8870", 0x2B), + .platform_data = (void *)&adp8870_pdata, + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371) + { + I2C_BOARD_INFO("adau1371", 0x1A), + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) + { + I2C_BOARD_INFO("adau1761", 0x38), + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361) + { + I2C_BOARD_INFO("adau1361", 0x38), + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701) + { + I2C_BOARD_INFO("adau1701", 0x34), + }, +#endif +#if IS_ENABLED(CONFIG_AD525X_DPOT) + { + I2C_BOARD_INFO("ad5258", 0x18), + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) + { + I2C_BOARD_INFO("ad5398", 0xC), + .platform_data = (void *)&ad5398_regulator_data, + }, +#endif +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) + { + I2C_BOARD_INFO("adp8860", 0x2A), + .platform_data = (void *)&adp8860_pdata, + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) + { + I2C_BOARD_INFO("adau1373", 0x1A), + }, +#endif +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) + { + I2C_BOARD_INFO("ad5252", 0x2e), + }, +#endif +}; +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; +#endif +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif +#if IS_ENABLED(CONFIG_BFIN_SPORT) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#if IS_ENABLED(CONFIG_PATA_PLATFORM) +#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE +/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ + +#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE +#define PATA_INT IRQ_PF5 +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE) +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 0, +}; +/* CompactFlash Storage Card Memory Mapped Addressing + * /REG = A11 = 1 + */ +static struct resource bfin_pata_resources[] = { + { + .start = 0x20211800, + .end = 0x20211807, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2021180E, /* Device Ctl */ + .end = 0x2021180E, + .flags = IORESOURCE_MEM, + }, +}; +#endif + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 500000000), + VRPAIR(VLEV_125, 533000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) + +#define SPORT_REQ(x) \ + [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ + P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} + +static const u16 bfin_snd_pin[][7] = { + SPORT_REQ(0), + SPORT_REQ(1), +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) +static const unsigned ad73311_gpio[] = { + GPIO_PF4, +}; + +static struct platform_device bfin_ad73311_machine = { + .name = "bfin-snd-ad73311", + .id = 1, + .dev = { + .platform_data = (void *)ad73311_gpio, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) +static struct platform_device bfin_ad73311_codec_device = { + .name = "ad73311", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) +static struct platform_device bfin_eval_adav801_device = { + .name = "bfin-eval-adav801", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, +}; +#endif + +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) +#define REGULATOR_ADP122 "adp122" +#define REGULATOR_ADP122_UV 2500000 + +static struct regulator_consumer_supply adp122_consumers = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_init_data adp_switch_regulator_data = { + .constraints = { + .name = REGULATOR_ADP122, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uV = REGULATOR_ADP122_UV, + .max_uV = REGULATOR_ADP122_UV, + .min_uA = 0, + .max_uA = 300000, + }, + .num_consumer_supplies = 1, /* only 1 */ + .consumer_supplies = &adp122_consumers, +}; + +static struct fixed_voltage_config adp_switch_pdata = { + .supply_name = REGULATOR_ADP122, + .microvolts = REGULATOR_ADP122_UV, + .gpio = GPIO_PF2, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &adp_switch_regulator_data, +}; + +static struct platform_device adp_switch_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &adp_switch_pdata, + }, +}; + +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) +static struct regulator_bulk_data adp122_bulk_data = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = { + .name = REGULATOR_ADP122, + .num_supplies = 1, + .supplies = &adp122_bulk_data, +}; + +static struct platform_device adp122_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &adp122_userspace_comsumer_data, + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) + +static struct resource iio_gpio_trigger_resources[] = { + [0] = { + .start = IRQ_PF5, + .end = IRQ_PF5, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device iio_gpio_trigger = { + .name = "iio_gpio_trigger", + .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources), + .resource = iio_gpio_trigger_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) +static struct platform_device bf5xx_adau1373_device = { + .name = "bfin-eval-adau1373", +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) +static struct platform_device bf5xx_adau1701_device = { + .name = "bfin-eval-adau1701", +}; +#endif + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, +#if IS_ENABLED(CONFIG_BFIN_SPORT) + &bfin_sport0_device, +#endif +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) + &bfin_pcmcia_cf_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) + &rtc_device, +#endif + +#if IS_ENABLED(CONFIG_USB_SL811_HCD) + &sl811_hcd_device, +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) + &isp1362_hcd_device, +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) + &bfin_isp1760_device, +#endif + +#if IS_ENABLED(CONFIG_SMC91X) + &smc91x_device, +#endif + +#if IS_ENABLED(CONFIG_DM9000) + &dm9000_device, +#endif + +#if IS_ENABLED(CONFIG_CAN_BFIN) + &bfin_can_device, +#endif + +#if IS_ENABLED(CONFIG_BFIN_MAC) + &bfin_mii_bus, + &bfin_mac_device, +#endif + +#if IS_ENABLED(CONFIG_USB_NET2272) + &net2272_bfin_device, +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) + &bfin_spi0_device, +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) + &bfin_sport_spi0_device, + &bfin_sport_spi1_device, +#endif + +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) + &bfin_fb_device, +#endif + +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) + &bfin_lq035q1_device, +#endif + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) + &bfin_capture_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) + &i2c_bfin_twi_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_PATA_PLATFORM) + &bfin_pata_device, +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) + &bfin_device_gpiokeys, +#endif + +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) + &bfin_async_nand_device, +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) + &stamp_flash_device, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + &bfin_i2s_pcm, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97_pcm, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) + &bfin_ad73311_machine, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) + &bfin_ad73311_codec_device, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) + &bfin_i2s, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) + &bfin_ac97, +#endif + +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) + &ad5398_virt_consumer_device, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) + &ad5398_userspace_consumer_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) + &adp_switch_device, +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) + &adp122_userspace_consumer_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) + &iio_gpio_trigger, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) + &bf5xx_adau1373_device, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) + &bf5xx_adau1701_device, +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) + &bfin_eval_adav801_device, +#endif +}; + +static int __init net2272_init(void) +{ +#if IS_ENABLED(CONFIG_USB_NET2272) + int ret; + + ret = gpio_request(GPIO_PF6, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF6, 0); + mdelay(2); + gpio_set_value(GPIO_PF6, 1); +#endif + + return 0; +} + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + bfin_plat_nand_init(); + adf702x_mac_init(); + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + + return 0; +} + +arch_initcall(stamp_init); + + +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); +} + +/* + * Currently the MAC address is saved in Flash by U-Boot + */ +#define FLASH_MAC 0x203f0000 +int bfin_get_ether_addr(char *addr) +{ + *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); + *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); + return 0; +} +EXPORT_SYMBOL(bfin_get_ether_addr); -- cgit 1.2.3-korg