From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/arch/arm/boot/dts/kirkwood.dtsi | 383 +++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 kernel/arch/arm/boot/dts/kirkwood.dtsi (limited to 'kernel/arch/arm/boot/dts/kirkwood.dtsi') diff --git a/kernel/arch/arm/boot/dts/kirkwood.dtsi b/kernel/arch/arm/boot/dts/kirkwood.dtsi new file mode 100644 index 000000000..464f09a1a --- /dev/null +++ b/kernel/arch/arm/boot/dts/kirkwood.dtsi @@ -0,0 +1,383 @@ +/include/ "skeleton.dtsi" +#include +#include + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +/ { + compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,feroceon"; + reg = <0>; + clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; + clock-names = "cpu_clk", "ddrclk", "powersave"; + }; + }; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + i2c0 = &i2c0; + }; + + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + /* If a board file needs to change this ranges it must replace it completely */ + ranges = ; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ + pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + + cesa: crypto@0301 { + compatible = "marvell,orion-crypto"; + reg = , + ; + reg-names = "regs", "sram"; + interrupts = <22>; + clocks = <&gate_clk 17>; + status = "okay"; + }; + + nand: nand@012f { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "marvell,orion-nand"; + reg = ; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x0100000>; + #address-cells = <1>; + #size-cells = <1>; + + pinctrl: pin-controller@10000 { + /* set compatible property in SoC file */ + reg = <0x10000 0x20>; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + + /* + * Default SPI0 pinctrl setting with CSn on mpp0, + * overwrite marvell,pins on board level if required. + */ + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + + /* + * Default UART pinctrl setting without RTS/CTS, + * overwrite marvell,pins on board level if required. + */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,kirkwood-core-clock"; + reg = <0x10030 0x4>; + #clock-cells = <1>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + status = "disabled"; + }; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; + }; + + gpio1: gpio@10140 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10140 0x40>; + ngpios = <18>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <33>; + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <34>; + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + + sysc: system-controller@20000 { + compatible = "marvell,orion-system-controller"; + reg = <0x20000 0x120>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; + }; + + gate_clk: clock-gating-control@2011c { + compatible = "marvell,kirkwood-gating-clock"; + reg = <0x2011c 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + l2: l2-cache@20128 { + compatible = "marvell,kirkwood-cache"; + reg = <0x20128 0x4>; + }; + + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + wdt: watchdog-timer@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>, <0x20108 0x4>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + clocks = <&gate_clk 7>; + status = "okay"; + }; + + usb0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + clocks = <&gate_clk 3>; + status = "okay"; + }; + + dma0: xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60A00 0x100>; + status = "okay"; + clocks = <&gate_clk 8>; + + xor00 { + interrupts = <5>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <6>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + dma1: xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60B00 0x100>; + status = "okay"; + clocks = <&gate_clk 16>; + + xor00 { + interrupts = <7>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <8>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth0: ethernet-controller@72000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 0>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + eth0port: ethernet0-port@0 { + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <11>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + eth1: ethernet-controller@76000 { + compatible = "marvell,kirkwood-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76000 0x4000>; + clocks = <&gate_clk 19>; + marvell,tx-checksum-limit = <1600>; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + status = "disabled"; + + eth1port: ethernet1-port@0 { + compatible = "marvell,kirkwood-eth-port"; + reg = <0>; + interrupts = <15>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + sata_phy0: sata-phy@82000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x82000 0x0334>; + clocks = <&gate_clk 14>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + sata_phy1: sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + audio0: audio-controller@a0000 { + compatible = "marvell,kirkwood-audio"; + #sound-dai-cells = <0>; + reg = <0xa0000 0x2210>; + interrupts = <24>; + clocks = <&gate_clk 9>; + clock-names = "internal"; + status = "disabled"; + }; + }; +}; -- cgit 1.2.3-korg