From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- .../dts/armada-370-seagate-personal-cloud.dtsi | 178 +++++++++++++++++++++ 1 file changed, 178 insertions(+) create mode 100644 kernel/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi (limited to 'kernel/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi') diff --git a/kernel/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/kernel/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi new file mode 100644 index 000000000..1aba08e43 --- /dev/null +++ b/kernel/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -0,0 +1,178 @@ +/* + * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay + * (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LED. + */ + +#include "armada-370.dtsi" +#include +#include + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + coherency-fabric@20200 { + broken-idle; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + spi@10600 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = ; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "USB VBUS error"; + linux,code = ; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-sata0 { + label = "cumulus:red:sata0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pinctrl-0 = <&sata_led_pin>; + pinctrl-names = "default"; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp60"; + marvell,function = "sata0"; + }; + gpio_led_pin: gpio-led-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; +}; -- cgit 1.2.3-korg