From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/arch/arc/boot/dts/axc001.dtsi | 100 +++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 kernel/arch/arc/boot/dts/axc001.dtsi (limited to 'kernel/arch/arc/boot/dts/axc001.dtsi') diff --git a/kernel/arch/arc/boot/dts/axc001.dtsi b/kernel/arch/arc/boot/dts/axc001.dtsi new file mode 100644 index 000000000..420dcfde2 --- /dev/null +++ b/kernel/arch/arc/boot/dts/axc001.dtsi @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Device tree for AXC001 770D/EM6/AS221 CPU card + * Note that this file only supports the 770D CPU + */ + +/ { + compatible = "snps,arc"; + clock-frequency = <750000000>; /* 750 MHZ */ + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + cpu_intc: arc700-intc@cpu { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@0x2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpu_intc>; + interrupts = <15>; + }; + }; + + debug_uart: dw-apb-uart@0x5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <19 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpmu0: pmu { + compatible = "snps,arc700-pct"; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <7>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: dw-apb-ictl@0xe0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&cpu_intc>; + interrupts = < 7 >; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; -- cgit 1.2.3-korg