From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- .../bindings/watchdog/atmel-sama5d4-wdt.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt (limited to 'kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt') diff --git a/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt new file mode 100644 index 000000000..f7cc7c060 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt @@ -0,0 +1,35 @@ +* Atmel SAMA5D4 Watchdog Timer (WDT) Controller + +Required properties: +- compatible: "atmel,sama5d4-wdt" +- reg: base physical address and length of memory mapped region. + +Optional properties: +- timeout-sec: watchdog timeout value (in seconds). +- interrupts: interrupt number to the CPU. +- atmel,watchdog-type: should be "hardware" or "software". + "hardware": enable watchdog fault reset. A watchdog fault triggers + watchdog reset. + "software": enable watchdog fault interrupt. A watchdog fault asserts + watchdog interrupt. +- atmel,idle-halt: present if you want to stop the watchdog when the CPU is + in idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. +- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is + in debug state. + +Example: + watchdog@fc068640 { + compatible = "atmel,sama5d4-wdt"; + reg = <0xfc068640 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>; + timeout-sec = <10>; + atmel,watchdog-type = "hardware"; + atmel,dbg-halt; + atmel,idle-halt; + status = "okay"; + }; -- cgit 1.2.3-korg