From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- .../devicetree/bindings/usb/keystone-phy.txt | 20 -------------------- 1 file changed, 20 deletions(-) delete mode 100644 kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt (limited to 'kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt') diff --git a/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt b/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt deleted file mode 100644 index f37b3a863..000000000 --- a/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt +++ /dev/null @@ -1,20 +0,0 @@ -TI Keystone USB PHY - -Required properties: - - compatible: should be "ti,keystone-usbphy". - - #address-cells, #size-cells : should be '1' if the device has sub-nodes - with 'reg' property. - - reg : Address and length of the usb phy control register set. - -The main purpose of this PHY driver is to enable the USB PHY reference clock -gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just -an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 -phy node in the USB Glue layer driver node. - -usb_phy: usb_phy@2620738 { - compatible = "ti,keystone-usbphy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2620738 32>; - status = "disabled"; -}; -- cgit 1.2.3-korg