From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- .../devicetree/bindings/sound/adi,adau1701.txt | 4 + .../devicetree/bindings/sound/ak4554.c | 11 -- .../devicetree/bindings/sound/ak4554.txt | 11 ++ .../devicetree/bindings/sound/ak4613.txt | 17 +++ .../devicetree/bindings/sound/ak4642.txt | 22 ++- .../devicetree/bindings/sound/atmel-classd.txt | 52 +++++++ .../devicetree/bindings/sound/bt-sco.txt | 13 ++ .../devicetree/bindings/sound/cs4349.txt | 19 +++ .../devicetree/bindings/sound/da7213.txt | 41 ++++++ .../devicetree/bindings/sound/da7219.txt | 106 ++++++++++++++ .../devicetree/bindings/sound/fsl-asoc-card.txt | 10 +- .../devicetree/bindings/sound/gtm601.txt | 13 ++ .../devicetree/bindings/sound/ics43432.txt | 17 +++ .../devicetree/bindings/sound/max98090.txt | 6 + .../devicetree/bindings/sound/max98357a.txt | 6 +- .../devicetree/bindings/sound/mt8173-max98090.txt | 15 ++ .../bindings/sound/mt8173-rt5650-rt5676.txt | 15 ++ .../devicetree/bindings/sound/mtk-afe-pcm.txt | 45 ++++++ .../devicetree/bindings/sound/nau8825.txt | 102 ++++++++++++++ .../bindings/sound/nvidia,tegra30-hda.txt | 8 +- .../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 60 ++++++++ .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 13 +- .../devicetree/bindings/sound/renesas,rsnd.txt | 32 ++++- .../bindings/sound/renesas,rsrc-card.txt | 7 + .../devicetree/bindings/sound/rockchip-i2s.txt | 6 +- .../bindings/sound/rockchip-max98090.txt | 19 +++ .../devicetree/bindings/sound/rockchip-rt5645.txt | 17 +++ .../devicetree/bindings/sound/rockchip-spdif.txt | 40 ++++++ .../devicetree/bindings/sound/rt5640.txt | 9 +- .../devicetree/bindings/sound/rt5645.txt | 72 ++++++++++ .../devicetree/bindings/sound/rt5677.txt | 2 + .../devicetree/bindings/sound/simple-card.txt | 6 +- .../devicetree/bindings/sound/st,sti-asoc-card.txt | 155 +++++++++++++++++++++ .../devicetree/bindings/sound/sun4i-codec.txt | 27 ++++ .../devicetree/bindings/sound/tas2552.txt | 6 + .../devicetree/bindings/sound/tas571x.txt | 41 ++++++ .../devicetree/bindings/sound/tdm-slot.txt | 11 +- .../devicetree/bindings/sound/wm8741.txt | 11 ++ .../devicetree/bindings/sound/zte,zx-i2s.txt | 44 ++++++ .../devicetree/bindings/sound/zte,zx-spdif.txt | 28 ++++ 40 files changed, 1107 insertions(+), 32 deletions(-) delete mode 100644 kernel/Documentation/devicetree/bindings/sound/ak4554.c create mode 100644 kernel/Documentation/devicetree/bindings/sound/ak4554.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/ak4613.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/bt-sco.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/cs4349.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/da7213.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/da7219.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/gtm601.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/ics43432.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/nau8825.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/rt5645.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/tas571x.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt create mode 100644 kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt (limited to 'kernel/Documentation/devicetree/bindings/sound') diff --git a/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt b/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt index 547a49b56..0d1128ce2 100644 --- a/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt +++ b/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt @@ -20,6 +20,8 @@ Optional properties: pin configurations as described in the datasheet, table 53. Note that the value of this property has to be prefixed with '/bits/ 8'. + - avdd-supply: Power supply for AVDD, providing 3.3V + - dvdd-supply: Power supply for DVDD, providing 3.3V Examples: @@ -28,6 +30,8 @@ Examples: compatible = "adi,adau1701"; reg = <0x34>; reset-gpio = <&gpio 23 0>; + avdd-supply = <&vdd_3v3_reg>; + dvdd-supply = <&vdd_3v3_reg>; adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>; adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4 0x4 0x4 0x4 0x4 0x4 0x4>; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4554.c b/kernel/Documentation/devicetree/bindings/sound/ak4554.c deleted file mode 100644 index 934fa0275..000000000 --- a/kernel/Documentation/devicetree/bindings/sound/ak4554.c +++ /dev/null @@ -1,11 +0,0 @@ -AK4554 ADC/DAC - -Required properties: - - - compatible : "asahi-kasei,ak4554" - -Example: - -ak4554-adc-dac { - compatible = "asahi-kasei,ak4554"; -}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4554.txt b/kernel/Documentation/devicetree/bindings/sound/ak4554.txt new file mode 100644 index 000000000..934fa0275 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/ak4554.txt @@ -0,0 +1,11 @@ +AK4554 ADC/DAC + +Required properties: + + - compatible : "asahi-kasei,ak4554" + +Example: + +ak4554-adc-dac { + compatible = "asahi-kasei,ak4554"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4613.txt b/kernel/Documentation/devicetree/bindings/sound/ak4613.txt new file mode 100644 index 000000000..15a919522 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/ak4613.txt @@ -0,0 +1,17 @@ +AK4613 I2C transmitter + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak4613" +- reg : The chip select number on the I2C bus + +Example: + +&i2c { + ak4613: ak4613@0x10 { + compatible = "asahi-kasei,ak4613"; + reg = <0x10>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4642.txt b/kernel/Documentation/devicetree/bindings/sound/ak4642.txt index 623d4e70a..340784db6 100644 --- a/kernel/Documentation/devicetree/bindings/sound/ak4642.txt +++ b/kernel/Documentation/devicetree/bindings/sound/ak4642.txt @@ -7,7 +7,14 @@ Required properties: - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648" - reg : The chip select number on the I2C bus -Example: +Optional properties: + + - #clock-cells : common clock binding; shall be set to 0 + - clocks : common clock binding; MCKI clock + - clock-frequency : common clock binding; frequency of MCKO + - clock-output-names : common clock binding; MCKO clock name + +Example 1: &i2c { ak4648: ak4648@0x12 { @@ -15,3 +22,16 @@ Example: reg = <0x12>; }; }; + +Example 2: + +&i2c { + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + reg = <0x12>; + #clock-cells = <0>; + clocks = <&audio_clock>; + clock-frequency = <12288000>; + clock-output-names = "ak4643_mcko"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt b/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt new file mode 100644 index 000000000..0018451c4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt @@ -0,0 +1,52 @@ +* Atmel ClassD driver under ALSA SoC architecture + +Required properties: +- compatible + Should be "atmel,sama5d2-classd". +- reg + Should contain ClassD registers location and length. +- interrupts + Should contain the IRQ line for the ClassD. +- dmas + One DMA specifiers as described in atmel-dma.txt and dma.txt files. +- dma-names + Must be "tx". +- clock-names + Tuple listing input clock names. + Required elements: "pclk", "gclk" and "aclk". +- clocks + Please refer to clock-bindings.txt. + +Optional properties: +- pinctrl-names, pinctrl-0 + Please refer to pinctrl-bindings.txt. +- atmel,model + The user-visible name of this sound complex. + The default value is "CLASSD". +- atmel,pwm-type + PWM modulation type, "single" or "diff". + The default value is "single". +- atmel,non-overlap-time + Set non-overlapping time, the unit is nanosecond(ns). + There are four values, + <5>, <10>, <15>, <20>, the default value is <10>. + Non-overlapping will be disabled if not specified. + +Example: +classd: classd@fc048000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xfc048000 0x100>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(47))>; + dma-names = "tx"; + clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>; + clock-names = "pclk", "gclk", "aclk"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,model = "classd @ SAMA5D2-Xplained"; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt b/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt new file mode 100644 index 000000000..29b8e5d40 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt @@ -0,0 +1,13 @@ +Bluetooth-SCO audio CODEC + +This device support generic Bluetooth SCO link. + +Required properties: + + - compatible : "delta,dfbmcs320" + +Example: + +codec: bt_sco { + compatible = "delta,dfbmcs320"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/cs4349.txt b/kernel/Documentation/devicetree/bindings/sound/cs4349.txt new file mode 100644 index 000000000..54c117b59 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/cs4349.txt @@ -0,0 +1,19 @@ +CS4349 audio CODEC + +Required properties: + + - compatible : "cirrus,cs4349" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + +Example: + +codec: cs4349@48 { + compatible = "cirrus,cs4349"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/da7213.txt b/kernel/Documentation/devicetree/bindings/sound/da7213.txt new file mode 100644 index 000000000..58902802d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/da7213.txt @@ -0,0 +1,41 @@ +Dialog Semiconductor DA7213 Audio Codec bindings + +====== + +Required properties: +- compatible : Should be "dlg,da7213" +- reg: Specifies the I2C slave address + +Optional properties: +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- dlg,micbias1-lvl : Voltage (mV) for Mic Bias 1 + [<1600>, <2200>, <2500>, <3000>] +- dlg,micbias2-lvl : Voltage (mV) for Mic Bias 2 + [<1600>, <2200>, <2500>, <3000>] +- dlg,dmic-data-sel : DMIC channel select based on clock edge. + ["lrise_rfall", "lfall_rrise"] +- dlg,dmic-samplephase : When to sample audio from DMIC. + ["on_clkedge", "between_clkedge"] +- dlg,dmic-clkrate : DMIC clock frequency (Hz). + [<1500000>, <3000000>] + +====== + +Example: + + codec_i2c: da7213@1a { + compatible = "dlg,da7213"; + reg = <0x1a>; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/da7219.txt b/kernel/Documentation/devicetree/bindings/sound/da7219.txt new file mode 100644 index 000000000..1b7030911 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/da7219.txt @@ -0,0 +1,106 @@ +Dialog Semiconductor DA7219 Audio Codec bindings + +DA7219 is an audio codec with advanced accessory detect features. + +====== + +Required properties: +- compatible : Should be "dlg,da7219" +- reg: Specifies the I2C slave address + +- interrupt-parent : Specifies the phandle of the interrupt controller to which + the IRQs from DA7219 are delivered to. +- interrupts : IRQ line info for DA7219. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for + further information relating to interrupt properties) + +- VDD-supply: VDD power supply for the device +- VDDMIC-supply: VDDMIC power supply for the device +- VDDIO-supply: VDDIO power supply for the device + (See Documentation/devicetree/bindings/regulator/regulator.txt for further + information relating to regulators) + +Optional properties: +- interrupt-names : Name associated with interrupt line. Should be "wakeup" if + interrupt is to be used to wake system, otherwise "irq" should be used. +- wakeup-source: Flag to indicate this device can wake system (suspend/resume). + +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine + [<1050>, <1100>, <1200>, <1400>] +- dlg,micbias-lvl : Voltage (mV) for Mic Bias + [<1800>, <2000>, <2200>, <2400>, <2600>] +- dlg,mic-amp-in-sel : Mic input source type + ["diff", "se_p", "se_n"] + +====== + +Child node - 'da7219_aad': + +Optional properties: +- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). + [<2800>, <2900>] +- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) +- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) + [<2>, <5>, <10>, <50>, <100>, <200>, <500>] +- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) + [<200>, <500>, <750>, <1000>] +- dlg,jack-ins-deb : Debounce time for jack insertion (ms) + [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] +- dlg,jack-det-rate: Jack type detection latency (3/4 pole) + ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] +- dlg,jack-rem-deb : Debounce time for jack removal (ms) + [<1>, <5>, <10>, <20>] +- dlg,a-d-btn-thr : Impedance threshold between buttons A and D + [0x0 - 0xFF] +- dlg,d-b-btn-thr : Impedance threshold between buttons D and B + [0x0 - 0xFF] +- dlg,b-c-btn-thr : Impedance threshold between buttons B and C + [0x0 - 0xFF] +- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic + [0x0 - 0xFF] +- dlg,btn-avg : Number of 8-bit readings for averaged button measurement + [<1>, <2>, <4>, <8>] +- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement + [<1>, <2>, <4>, <8>] + +====== + +Example: + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + VDD-supply = <®_audio>; + VDDMIC-supply = <®_audio>; + VDDIO-supply = <®_audio>; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,ldo-lvl = <1200>; + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + + da7219_aad { + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + + dlg,btn-avg = <4>; + dlg,adc-1bit-rpt = <1>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index a96774c19..ce55c0a6f 100644 --- a/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -13,13 +13,15 @@ So having this generic sound card allows all Freescale SoC users to benefit from the simplification of a new card support and the capability of the wide sample rates support through ASRC. -Note: The card is initially designed for those sound cards who use I2S and - PCM DAI formats. However, it'll be also possible to support those non - I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long - as the driver has been properly upgraded. +Note: The card is initially designed for those sound cards who use AC'97, I2S + and PCM DAI formats. However, it'll be also possible to support those non + AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as + long as the driver has been properly upgraded. The compatible list for this generic sound card currently: + "fsl,imx-audio-ac97" + "fsl,imx-audio-cs42888" "fsl,imx-audio-wm8962" diff --git a/kernel/Documentation/devicetree/bindings/sound/gtm601.txt b/kernel/Documentation/devicetree/bindings/sound/gtm601.txt new file mode 100644 index 000000000..5efc8c068 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/gtm601.txt @@ -0,0 +1,13 @@ +GTM601 UMTS modem audio interface CODEC + +This device has no configuration interface. Sample rate is fixed - 8kHz. + +Required properties: + + - compatible : "option,gtm601" + +Example: + +codec: gtm601_codec { + compatible = "option,gtm601"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ics43432.txt b/kernel/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 000000000..b02e3a6c0 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/max98090.txt b/kernel/Documentation/devicetree/bindings/sound/max98090.txt index aa802a274..4e3be6682 100644 --- a/kernel/Documentation/devicetree/bindings/sound/max98090.txt +++ b/kernel/Documentation/devicetree/bindings/sound/max98090.txt @@ -18,6 +18,12 @@ Optional properties: - maxim,dmic-freq: Frequency at which to clock DMIC +- maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are: + 0 - 2.2v + 1 - 2.55v + 2 - 2.4v + 3 - 2.8v + Pins on the device (for linking into audio routes): * MIC1 diff --git a/kernel/Documentation/devicetree/bindings/sound/max98357a.txt b/kernel/Documentation/devicetree/bindings/sound/max98357a.txt index a7a149a23..28645a2ff 100644 --- a/kernel/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/kernel/Documentation/devicetree/bindings/sound/max98357a.txt @@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC. Required properties: - compatible : "maxim,max98357a" -- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin + +Optional properties: +- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). Example: diff --git a/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt new file mode 100644 index 000000000..519e97c8f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt @@ -0,0 +1,15 @@ +MT8173 with MAX98090 CODEC + +Required properties: +- compatible : "mediatek,mt8173-max98090" +- mediatek,audio-codec: the phandle of the MAX98090 audio codec +- mediatek,platform: the phandle of MT8173 ASoC platform + +Example: + + sound { + compatible = "mediatek,mt8173-max98090"; + mediatek,audio-codec = <&max98090>; + mediatek,platform = <&afe>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt new file mode 100644 index 000000000..f205ce9e3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -0,0 +1,15 @@ +MT8173 with RT5650 RT5676 CODECS + +Required properties: +- compatible : "mediatek,mt8173-rt5650-rt5676" +- mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs +- mediatek,platform: the phandle of MT8173 ASoC platform + +Example: + + sound { + compatible = "mediatek,mt8173-rt5650-rt5676"; + mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,platform = <&afe>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt b/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt new file mode 100644 index 000000000..e302c7f43 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt @@ -0,0 +1,45 @@ +Mediatek AFE PCM controller + +Required properties: +- compatible = "mediatek,mt8173-afe-pcm"; +- reg: register location and size +- interrupts: Should contain AFE interrupt +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + +Example: + + afe: mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + reg = <0 0x11220000 0 0x1000>; + interrupts = ; + clocks = <&infracfg INFRA_AUDIO>, + <&topckgen TOP_AUDIO_SEL>, + <&topckgen TOP_AUD_INTBUS_SEL>, + <&topckgen TOP_APLL1_DIV0>, + <&topckgen TOP_APLL2_DIV0>, + <&topckgen TOP_I2S0_M_CK_SEL>, + <&topckgen TOP_I2S1_M_CK_SEL>, + <&topckgen TOP_I2S2_M_CK_SEL>, + <&topckgen TOP_I2S3_M_CK_SEL>, + <&topckgen TOP_I2S3_B_CK_SEL>; + clock-names = "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/nau8825.txt b/kernel/Documentation/devicetree/bindings/sound/nau8825.txt new file mode 100644 index 000000000..d3374231c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/nau8825.txt @@ -0,0 +1,102 @@ +Nuvoton NAU8825 audio codec + +This device supports I2C only. + +Required properties: + - compatible : Must be "nuvoton,nau8825" + + - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). + +Optional properties: + - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. + - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. + - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. + + - nuvoton,vref-impedance: VREF Impedance selection + 0 - Open + 1 - 25 kOhm + 2 - 125 kOhm + 3 - 2.5 kOhm + + - nuvoton,micbias-voltage: Micbias voltage level. + 0 - VDDA + 1 - VDDA + 2 - VDDA * 1.1 + 3 - VDDA * 1.2 + 4 - VDDA * 1.3 + 5 - VDDA * 1.4 + 6 - VDDA * 1.53 + 7 - VDDA * 1.53 + + - nuvoton,sar-threshold-num: Number of buttons supported + - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) + where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold calculation. + + - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. + + - nuvoton,sar-voltage: Reference voltage for button impedance measurement. + 0 - VDDA + 1 - VDDA + 2 - VDDA * 1.1 + 3 - VDDA * 1.2 + 4 - VDDA * 1.3 + 5 - VDDA * 1.4 + 6 - VDDA * 1.53 + 7 - VDDA * 1.53 + + - nuvoton,sar-compare-time: SAR compare time + 0 - 500 ns + 1 - 1 us + 2 - 2 us + 3 - 4 us + + - nuvoton,sar-sampling-time: SAR sampling time + 0 - 2 us + 1 - 4 us + 2 - 8 us + 3 - 16 us + + - nuvoton,short-key-debounce: Button short key press debounce time. + 0 - 30 ms + 1 - 50 ms + 2 - 100 ms + 3 - 30 ms + + - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + + - clocks: list of phandle and clock specifier pairs according to common clock bindings for the + clocks described in clock-names + - clock-names: should include "mclk" for the MCLK master clock + +Example: + + headset: nau8825@1a { + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = ; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,jkdet-polarity = ; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <1>; + nuvoton,sar-voltage = <0>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + + clock-names = "mclk"; + clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index 13e2ef496..275c6ea35 100644 --- a/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -8,10 +8,10 @@ Required properties: - interrupts : The interrupt from the HDA controller. - clocks : Must contain an entry for each required entry in clock-names. See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. -- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x Example: @@ -24,7 +24,7 @@ hda@0,70030000 { <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ - <&tegra_car 128>; /* hda2hdmi */ - <&tegra_car 111>, /* hda2codec_2x */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt new file mode 100644 index 000000000..48129368d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -0,0 +1,60 @@ +* Qualcomm Technologies APQ8016 SBC ASoC machine driver + +This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver + +Required properties: + +- compatible : "qcom,apq8016-sbc-sndcard" + +- pinctrl-N : One property must exist for each entry in + pinctrl-names. See ../pinctrl/pinctrl-bindings.txt + for details of the property values. +- pinctrl-names : Must contain a "default" entry. +- reg : Must contain an address for each entry in reg-names. +- reg-names : A list which must include the following entries: + * "mic-iomux" + * "spkr-iomux" +- qcom,model : Name of the sound card. + +Dai-link subnode properties and subnodes: + +Required dai-link subnodes: + +- cpu : CPU sub-node +- codec : CODEC sub-node + +Required CPU/CODEC subnodes properties: + +-link-name : Name of the dai link. +-sound-dai : phandle and port of CPU/CODEC +-capture-dai : phandle and port of CPU/CODEC + +Example: + +sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + qcom,model = "DB410c"; + + /* I2S - Internal codec */ + internal-dai-link@0 { + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&wcd_codec 0>; + }; + }; + + /* External Primary or External Secondary -ADV7533 HDMI */ + external-dai-link@0 { + link-name = "ADV7533"; + cpu { /* QUAT */ + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt index e00732dac..21c648328 100644 --- a/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ b/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt @@ -4,12 +4,21 @@ This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). Required properties: -- compatible : "qcom,lpass-cpu" +- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" - clocks : Must contain an entry for each entry in clock-names. - clock-names : A list which must include the following entries: * "ahbix-clk" * "mi2s-osr-clk" * "mi2s-bit-clk" + : required clocks for "qcom,lpass-cpu-apq8016" + * "ahbix-clk" + * "mi2s-bit-clk0" + * "mi2s-bit-clk1" + * "mi2s-bit-clk2" + * "mi2s-bit-clk3" + * "pcnoc-mport-clk" + * "pcnoc-sway-clk" + - interrupts : Must contain an entry for each entry in interrupt-names. - interrupt-names : A list which must include the following entries: @@ -22,6 +31,8 @@ Required properties: - reg-names : A list which must include the following entries: * "lpass-lpaif" + + Optional properties: - qcom,adsp : Phandle for the audio DSP node diff --git a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index f316ce1f2..c57cbd657 100644 --- a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -4,9 +4,12 @@ Required properties: - compatible : "renesas,rcar_sound-", fallbacks "renesas,rcar_sound-gen1" if generation1, and "renesas,rcar_sound-gen2" if generation2 + "renesas,rcar_sound-gen3" if generation3 Examples with soctypes are: + - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7790" (R-Car H2) - "renesas,rcar_sound-r8a7791" (R-Car M2-W) + - "renesas,rcar_sound-r8a7795" (R-Car H3) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 @@ -17,12 +20,23 @@ Required properties: - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. +- rcar_sound,ctu : Should contain CTU feature. + The number of CTU subnode should be same as HW. + see below for detail. +- rcar_sound,mix : Should contain MIX feature. + The number of MIX subnode should be same as HW. + see below for detail. - rcar_sound,dvc : Should contain DVC feature. The number of DVC subnode should be same as HW. see below for detail. - rcar_sound,dai : DAI contents. The number of DAI subnode should be same as HW. see below for detail. +- #sound-dai-cells : it must be 0 if your system is using single DAI + it must be 1 if your system is using multi DAI +- #clock-cells : it must be 0 if your system has audio_clkout + it must be 1 if your system has audio_clkout0/1/2/3 +- clock-frequency : for all audio_clkout0/1/2/3 SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer @@ -47,7 +61,7 @@ DAI subnode properties: Example: -rcar_sound: rcar_sound@ec500000 { +rcar_sound: sound@ec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ @@ -89,6 +103,22 @@ rcar_sound: rcar_sound@ec500000 { }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; diff --git a/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index c64155027..962748a8d 100644 --- a/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -6,6 +6,7 @@ Required properties: - compatible : "renesas,rsrc-card," Examples with soctypes are: + - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" Optional properties: @@ -29,6 +30,12 @@ Optional subnode properties: - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. - convert-rate : platform specified sampling rate convert +- audio-prefix : see audio-routing +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources. + use audio-prefix if some components is using same sink/sources naming. + it can be used if compatible was "renesas,rsrc-card"; Required CPU/CODEC subnodes properties: diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20b3..2267d249c 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -12,8 +12,6 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. -- #address-cells: should be 1. -- #size-cells: should be 0. - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". @@ -21,6 +19,7 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +- rockchip,capture-channels: max capture channels, if not set, 2 channels default. Example for rk3288 I2S controller: @@ -28,10 +27,9 @@ i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; interrupts = ; - #address-cells = <1>; - #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,capture-channels = <2>; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt new file mode 100644 index 000000000..a805aa99a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt @@ -0,0 +1,19 @@ +ROCKCHIP with MAX98090 CODEC + +Required properties: +- compatible: "rockchip,rockchip-audio-max98090" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the MAX98090 audio codec +- rockchip,headset-codec: The phandle of Ext chip for jack detection + +Example: + +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,headset-codec = <&headsetcodec>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt new file mode 100644 index 000000000..411a62b3f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt @@ -0,0 +1,17 @@ +ROCKCHIP with RT5645/RT5650 CODECS + +Required properties: +- compatible: "rockchip,rockchip-audio-rt5645" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec + +Example: + +sound { + compatible = "rockchip,rockchip-audio-rt5645"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&rt5645>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt new file mode 100644 index 000000000..e64dbdea7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -0,0 +1,40 @@ +* Rockchip SPDIF transceiver + +The S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + +- compatible: should be one of the following: + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or + "rockchip,rk3066-spdif" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the SPDIF interrupt. +- dmas: DMA specifiers for tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should be "tx" +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain following: + - "hclk": clock for SPDIF controller + - "mclk" : clock for SPDIF bus + +Required properties on RK3288: + - rockchip,grf: the phandle of the syscon node for the general register + file (GRF) + +Example for the rk3188 SPDIF controller: + +spdif: spdif@0x1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = ; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + status = "disabled"; + #sound-dai-cells = <0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5640.txt b/kernel/Documentation/devicetree/bindings/sound/rt5640.txt index bac4d9ac1..9e62f6eb3 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rt5640.txt @@ -14,7 +14,8 @@ Optional properties: - realtek,in1-differential - realtek,in2-differential - Boolean. Indicate MIC1/2 input are differential, rather than single-ended. +- realtek,in3-differential + Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended. - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. @@ -24,9 +25,11 @@ Pins on the device (for linking into audio routes) for RT5639/RT5640: * DMIC2 * MICBIAS1 * IN1P - * IN1R + * IN1N * IN2P - * IN2R + * IN2N + * IN3P + * IN3N * HPOL * HPOR * LOUTL diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5645.txt b/kernel/Documentation/devicetree/bindings/sound/rt5645.txt new file mode 100644 index 000000000..7cee1f518 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rt5645.txt @@ -0,0 +1,72 @@ +RT5650/RT5645 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5645" or "realtek,rt5650". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- hp-detect-gpios: + a GPIO spec for the external headphone detect pin. If jd-mode = 0, + we will get the JD status by getting the value of hp-detect-gpios. + +- realtek,in2-differential + Boolean. Indicate MIC2 input are differential, rather than single-ended. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN2P pin as dmic1 data pin + 2: using GPIO6 pin as dmic1 data pin + 3: using GPIO10 pin as dmic1 data pin + 4: using GPIO12 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN2N pin as dmic2 data pin + 2: using GPIO5 pin as dmic2 data pin + 3: using GPIO11 pin as dmic2 data pin + +-- realtek,jd-mode : The JD mode of rt5645/rt5650 + 0 : rt5645/rt5650 JD function is not used + 1 : Mode-0 (VDD=3.3V), two port jack detection + 2 : Mode-1 (VDD=3.3V), one port jack detection + 3 : Mode-2 (VDD=1.8V), one port jack detection + +Pins on the device (for linking into audio routes) for RT5645/RT5650: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * Haptic Generator + * HPOL + * HPOR + * LOUTL + * LOUTR + * PDM1L + * PDM1R + * SPOL + * SPOR + +Example: + +codec: rt5650@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + hp-detect-gpios = <&gpio 19 0>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + realtek,dmic-en = "true"; + realtek,en-jd-func = "true"; + realtek,jd-mode = <3>; +}; \ No newline at end of file diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5677.txt b/kernel/Documentation/devicetree/bindings/sound/rt5677.txt index 740ff771a..f07078997 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rt5677.txt @@ -18,6 +18,7 @@ Required properties: Optional properties: - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. +- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. - realtek,in1-differential - realtek,in2-differential @@ -70,6 +71,7 @@ rt5677 { realtek,pow-ldo2-gpio = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>; realtek,in1-differential = "true"; realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */ diff --git a/kernel/Documentation/devicetree/bindings/sound/simple-card.txt b/kernel/Documentation/devicetree/bindings/sound/simple-card.txt index 73bf314f7..cf3979eb3 100644 --- a/kernel/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/simple-card.txt @@ -16,7 +16,8 @@ Optional properties: connection's sink, the second being the connection's source. - simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec - mclk. + mclk. When defined, mclk-fs property defined in + dai-link sub nodes are ignored. - simple-audio-card,hp-det-gpio : Reference to GPIO that signals when headphones are attached. - simple-audio-card,mic-det-gpio : Reference to GPIO that signals when @@ -55,6 +56,9 @@ Optional dai-link subnode properties: dai-link uses bit clock inversion. - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. +- mclk-fs : Multiplication factor between stream + rate and codec mclk, applied only for + the dai-link. For backward compatibility the frame-master and bitclock-master properties can be used as booleans in codec subnode to indicate if the diff --git a/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt new file mode 100644 index 000000000..028fa1c82 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -0,0 +1,155 @@ +STMicroelectronics sti ASoC cards + +The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas +codec or external codecs. + +sti sound drivers allows to expose sti SoC audio interface through the +generic ASoC simple card. For details about sound card declaration please refer to +Documentation/devicetree/bindings/sound/simple-card.txt. + +1) sti-uniperiph-dai: audio dai device. +--------------------------------------- + +Required properties: + - compatible: "st,sti-uni-player" or "st,sti-uni-reader" + + - st,syscfg: phandle to boot-device system configuration registers + + - clock-names: name of the clocks listed in clocks property in the same order + + - reg: CPU DAI IP Base address and size entries, listed in same + order than the CPU_DAI properties. + + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + + - interrupts: CPU_DAI interrupt line, listed in the same order than the + CPU_DAI properties. + + - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same + order than the CPU_DAI properties. + + - dma-names: identifier string for each DMA request line in the dmas property. + "tx" for "st,sti-uni-player" compatibility + "rx" for "st,sti-uni-reader" compatibility + + - version: IP version integrated in SOC. + + - dai-name: DAI name that describes the IP. + +Required properties ("st,sti-uni-player" compatibility only): + - clocks: CPU_DAI IP clock source, listed in the same order than the + CPU_DAI properties. + + - uniperiph-id: internal SOC IP instance ID. + + - IP mode: IP working mode depending on associated codec. + "HDMI" connected to HDMI codec IP and IEC HDMI formats. + "SPDIF"connected to SPDIF codec and support SPDIF formats. + "PCM" PCM standard mode for I2S or TDM bus. + +Optional properties: + - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for + external codecs connection. + + - pinctrl-names: should contain only one value - "default". + +Example: + + sti_uni_player2: sti-uni-player@2 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_PCM_2>; + reg = <0x8D82000 0x158>; + interrupts = ; + dmas = <&fdma0 4 0 1>; + dai-name = "Uni Player #1 (DAC)"; + dma-names = "tx"; + uniperiph-id = <2>; + version = <5>; + mode = "PCM"; + }; + + sti_uni_player3: sti-uni-player@3 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; + reg = <0x8D85000 0x158>; + interrupts = ; + dmas = <&fdma0 7 0 1>; + dma-names = "tx"; + dai-name = "Uni Player #1 (PIO)"; + uniperiph-id = <3>; + version = <5>; + mode = "SPDIF"; + }; + + sti_uni_reader1: sti-uni-reader@1 { + compatible = "st,sti-uni-reader"; + status = "disabled"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + reg = <0x8D84000 0x158>; + interrupts = ; + dmas = <&fdma0 6 0 1>; + dma-names = "rx"; + dai-name = "Uni Reader #1 (HDMI RX)"; + version = <3>; + }; + +2) sti-sas-codec: internal audio codec IPs driver +------------------------------------------------- + +Required properties: + - compatible: "st,sti-sas-codec" . + Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec" + + - st,syscfg: phandle to boot-device system configuration registers. + + - pinctrl-0: SPDIF PIO description. + + - pinctrl-names: should contain only one value - "default". + +Example: + sti_sas_codec: sti-sas-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + st,reg_audio = <&syscfg_core>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_out >; + }; + +Example of audio card declaration: + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sti audio card"; + status = "okay"; + + simple-audio-card,dai-link@0 { + /* DAC */ + format = "i2s"; + dai-tdm-slot-width = <32>; + cpu { + sound-dai = <&sti_uni_player2>; + }; + + codec { + sound-dai = <&sti_sasg_codec 1>; + }; + }; + simple-audio-card,dai-link@1 { + /* SPDIF */ + format = "left_j"; + cpu { + sound-dai = <&sti_uni_player3>; + }; + + codec { + sound-dai = <&sti_sasg_codec 0>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt new file mode 100644 index 000000000..c92966bd5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -0,0 +1,27 @@ +* Allwinner A10 Codec + +Required properties: +- compatible: must be either "allwinner,sun4i-a10-codec" or + "allwinner,sun7i-a20-codec" +- reg: must contain the registers location and length +- interrupts: must contain the codec interrupt +- dmas: DMA channels for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should include "tx" and "rx". +- clocks: a list of phandle + clock-specifer pairs, one for each entry + in clock-names. +- clock-names: should contain followings: + - "apb": the parent APB clock for this controller + - "codec": the parent module clock + +Example: +codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <0 30 4>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma 0 19>, <&dma 0 19>; + dma-names = "rx", "tx"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/tas2552.txt b/kernel/Documentation/devicetree/bindings/sound/tas2552.txt index 55e2a0af5..c49992c0b 100644 --- a/kernel/Documentation/devicetree/bindings/sound/tas2552.txt +++ b/kernel/Documentation/devicetree/bindings/sound/tas2552.txt @@ -14,6 +14,12 @@ Required properties: Optional properties: - enable-gpio - gpio pin to enable/disable the device +tas2552 can receive it's reference clock via MCLK, BCLK, IVCLKIN pin or use the +internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM +reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK. +For system integration the dt-bindings/sound/tas2552.h header file provides +defined values to selct and configure the PLL and PDM reference clocks. + Example: tas2552: tas2552@41 { diff --git a/kernel/Documentation/devicetree/bindings/sound/tas571x.txt b/kernel/Documentation/devicetree/bindings/sound/tas571x.txt new file mode 100644 index 000000000..0ac31d8d5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/tas571x.txt @@ -0,0 +1,41 @@ +Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers + +The codec is controlled through an I2C interface. It also has two other +signals that can be wired up to GPIOs: reset (strongly recommended), and +powerdown (optional). + +Required properties: + +- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719" +- reg: The I2C address of the device +- #sound-dai-cells: must be equal to 0 + +Optional properties: + +- reset-gpios: GPIO specifier for the TAS571x's active low reset line +- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line +- clocks: clock phandle for the MCLK input +- clock-names: should be "mclk" +- AVDD-supply: regulator phandle for the AVDD supply (all chips) +- DVDD-supply: regulator phandle for the DVDD supply (all chips) +- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) +- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) +- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) +- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) +- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) +- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) +- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) + +Example: + + tas5717: audio-codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + + clocks = <&clk_core CLK_I2S>; + clock-names = "mclk"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt b/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt index 6a2c84247..34cf70e2c 100644 --- a/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt +++ b/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt @@ -4,11 +4,15 @@ This specifies audio DAI's TDM slot. TDM slot properties: dai-tdm-slot-num : Number of slots in use. -dai-tdm-slot-width : Width in bits for each slot. +dai-tdm-slot-width : Width in bits for each slot. +dai-tdm-slot-tx-mask : Transmit direction slot mask, optional +dai-tdm-slot-rx-mask : Receive direction slot mask, optional For instance: dai-tdm-slot-num = <2>; dai-tdm-slot-width = <8>; + dai-tdm-slot-tx-mask = <0 1>; + dai-tdm-slot-rx-mask = <1 0>; And for each spcified driver, there could be one .of_xlate_tdm_slot_mask() to specify a explicit mapping of the channels and the slots. If it's absent @@ -18,3 +22,8 @@ tx and rx masks. For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit for an active slot as default, and the default active bits are at the LSB of the masks. + +The explicit masks are given as array of integers, where the first +number presents bit-0 (LSB), second presents bit-1, etc. Any non zero +number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask() +does not do anything, if either mask is set non zero value. diff --git a/kernel/Documentation/devicetree/bindings/sound/wm8741.txt b/kernel/Documentation/devicetree/bindings/sound/wm8741.txt index 74bda58c1..a13315408 100644 --- a/kernel/Documentation/devicetree/bindings/sound/wm8741.txt +++ b/kernel/Documentation/devicetree/bindings/sound/wm8741.txt @@ -10,9 +10,20 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. +Optional properties: + + - diff-mode: Differential output mode configuration. Default value for field + DIFF in register R8 (MODE_CONTROL_2). If absent, the default is 0, shall be: + 0 = stereo + 1 = mono left + 2 = stereo reversed + 3 = mono right + Example: codec: wm8741@1a { compatible = "wlf,wm8741"; reg = <0x1a>; + + diff-mode = <3>; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt new file mode 100644 index 000000000..7e5aa6f6b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -0,0 +1,44 @@ +ZTE ZX296702 I2S controller + +Required properties: + - compatible : Must be "zte,zx296702-i2s" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + - clock-names: "tx" for the clock to the I2S interface. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects two dma channels for transmit. + - dma-names : Must be "tx" and "rx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + i2s0: i2s0@0b005000 { + #sound-dai-cells = <0>; + compatible = "zte,zx296702-i2s"; + reg = <0x0b005000 0x1000>; + clocks = <&lsp0clk ZX296702_I2S0_DIV>; + clock-names = "tx"; + interrupts = ; + dmas = <&dma 5>, <&dma 6>; + dma-names = "tx", "rx"; + status = "okay"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "zx296702_snd"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&acodec>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt new file mode 100644 index 000000000..989544ea6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -0,0 +1,28 @@ +ZTE ZX296702 SPDIF controller + +Required properties: + - compatible : Must be "zte,zx296702-spdif" + - reg : Must contain SPDIF core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + - clock-names: "tx" for the clock to the SPDIF interface. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects one dma channel for transmit. + - dma-names : Must be "tx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + spdif0: spdif0@0b004000 { + compatible = "zte,zx296702-spdif"; + reg = <0x0b004000 0x1000>; + clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; + clock-names = "tx"; + interrupts = ; + dmas = <&dma 4>; + dma-names = "tx"; + status = "okay"; + }; -- cgit 1.2.3-korg