From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- .../devicetree/bindings/mtd/pxa3xx-nand.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt (limited to 'kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt') diff --git a/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt new file mode 100644 index 000000000..4f833e3c4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -0,0 +1,43 @@ +PXA3xx NAND DT bindings + +Required properties: + + - compatible: Should be set to one of the following: + marvell,pxa3xx-nand + marvell,armada370-nand + - reg: The register base for the controller + - interrupts: The interrupt to map + - #address-cells: Set to <1> if the node includes partitions + +Optional properties: + + - marvell,nand-enable-arbiter: Set to enable the bus arbiter + - marvell,nand-keep-config: Set to keep the NAND controller config as set + by the bootloader + - num-cs: Number of chipselect lines to use + - nand-on-flash-bbt: boolean to enable on flash bbt option if + not present false + - nand-ecc-strength: number of bits to correct per ECC step + - nand-ecc-step-size: number of data bytes covered by a single ECC step + +The following ECC strength and step size are currently supported: + + - nand-ecc-strength = <1>, nand-ecc-step-size = <512> + - nand-ecc-strength = <4>, nand-ecc-step-size = <512> + - nand-ecc-strength = <8>, nand-ecc-step-size = <512> + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + + marvell,nand-enable-arbiter; + marvell,nand-keep-config; + num-cs = <1>; + + /* partitions (optional) */ + }; + -- cgit 1.2.3-korg