From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- .../devicetree/bindings/bus/sunxi-rsb.txt | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt (limited to 'kernel/Documentation/devicetree/bindings/bus') diff --git a/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt new file mode 100644 index 000000000..3dd28343b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -0,0 +1,47 @@ +Allwinner Reduced Serial Bus (RSB) controller + +The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire +serial bus with 1 master and up to 15 slaves. It is represented by a node +for the controller itself, and child nodes representing the slave devices. + +Required properties : + + - reg : Offset and length of the register set for the controller. + - compatible : Shall be "allwinner,sun8i-a23-rsb". + - interrupts : The interrupt line associated to the RSB controller. + - clocks : The gate clk associated to the RSB controller. + - resets : The reset line associated to the RSB controller. + - #address-cells : shall be 1 + - #size-cells : shall be 0 + +Optional properties : + + - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz. + If not set this defaults to 3MHz. + +Child nodes: + +An RSB controller node can contain zero or more child nodes representing +slave devices on the bus. Child 'reg' properties should contain the slave +device's hardware address. The hardware address is hardwired in the device, +which can normally be found in the datasheet. + +Example: + + rsb@01f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e3 { + compatible = "..."; + reg = <0x3e3>; + + /* ... */ + }; + }; -- cgit 1.2.3-korg