From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt (limited to 'kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt') diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt new file mode 100644 index 000000000..430608ec0 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -0,0 +1,97 @@ +ARM Broadcom STB platforms Device Tree Bindings +----------------------------------------------- +Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants) +SoC shall have the following DT organization: + +Required root node properties: + - compatible: "brcm,bcm", "brcm,brcmstb" + +example: +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + +Further, syscon nodes that map platform-specific registers used for general +system control is required: + + - compatible: "brcm,bcm-sun-top-ctrl", "syscon" + - compatible: "brcm,bcm-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm-hif-continuation", "syscon" + +example: + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", "syscon"; + reg = <0x452000 0x100>; + }; + }; + +Lastly, nodes that allow for support of SMP initialization and reboot are +required: + +smpboot +------- +Required properties: + + - compatible + The string "brcm,brcmstb-smpboot". + + - syscon-cpu + A phandle / integer array property which lets the BSP know the location + of certain CPU power-on registers. + + The layout of the property is as follows: + o a phandle to the "hif_cpubiuctrl" syscon node + o offset to the base CPU power zone register + o offset to the base CPU reset register + + - syscon-cont + A phandle pointing to the syscon node which describes the CPU boot + continuation registers. + o a phandle to the "hif_continuation" syscon node + +example: + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + +reboot +------- +Required properties + + - compatible + The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with + the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm + chips with the old SUN_TOP_CTRL interface. + + - syscon + A phandle / integer array that points to the syscon node which describes + the general system reset registers. + o a phandle to "sun_top_ctrl" + o offset to the "reset source enable" register + o offset to the "software master reset" register + +example: + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; -- cgit 1.2.3-korg