From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- kernel/Documentation/IRQ-domain.txt | 223 ++++++++++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 kernel/Documentation/IRQ-domain.txt (limited to 'kernel/Documentation/IRQ-domain.txt') diff --git a/kernel/Documentation/IRQ-domain.txt b/kernel/Documentation/IRQ-domain.txt new file mode 100644 index 000000000..3a8e15cba --- /dev/null +++ b/kernel/Documentation/IRQ-domain.txt @@ -0,0 +1,223 @@ +irq_domain interrupt number mapping library + +The current design of the Linux kernel uses a single large number +space where each separate IRQ source is assigned a different number. +This is simple when there is only one interrupt controller, but in +systems with multiple interrupt controllers the kernel must ensure +that each one gets assigned non-overlapping allocations of Linux +IRQ numbers. + +The number of interrupt controllers registered as unique irqchips +show a rising tendency: for example subdrivers of different kinds +such as GPIO controllers avoid reimplementing identical callback +mechanisms as the IRQ core system by modelling their interrupt +handlers as irqchips, i.e. in effect cascading interrupt controllers. + +Here the interrupt number loose all kind of correspondence to +hardware interrupt numbers: whereas in the past, IRQ numbers could +be chosen so they matched the hardware IRQ line into the root +interrupt controller (i.e. the component actually fireing the +interrupt line to the CPU) nowadays this number is just a number. + +For this reason we need a mechanism to separate controller-local +interrupt numbers, called hardware irq's, from Linux IRQ numbers. + +The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of +irq numbers, but they don't provide any support for reverse mapping of +the controller-local IRQ (hwirq) number into the Linux IRQ number +space. + +The irq_domain library adds mapping between hwirq and IRQ numbers on +top of the irq_alloc_desc*() API. An irq_domain to manage mapping is +preferred over interrupt controller drivers open coding their own +reverse mapping scheme. + +irq_domain also implements translation from Device Tree interrupt +specifiers to hwirq numbers, and can be easily extended to support +other IRQ topology data sources. + +=== irq_domain usage === +An interrupt controller driver creates and registers an irq_domain by +calling one of the irq_domain_add_*() functions (each mapping method +has a different allocator function, more on that later). The function +will return a pointer to the irq_domain on success. The caller must +provide the allocator function with an irq_domain_ops structure. + +In most cases, the irq_domain will begin empty without any mappings +between hwirq and IRQ numbers. Mappings are added to the irq_domain +by calling irq_create_mapping() which accepts the irq_domain and a +hwirq number as arguments. If a mapping for the hwirq doesn't already +exist then it will allocate a new Linux irq_desc, associate it with +the hwirq, and call the .map() callback so the driver can perform any +required hardware setup. + +When an interrupt is received, irq_find_mapping() function should +be used to find the Linux IRQ number from the hwirq number. + +The irq_create_mapping() function must be called *atleast once* +before any call to irq_find_mapping(), lest the descriptor will not +be allocated. + +If the driver has the Linux IRQ number or the irq_data pointer, and +needs to know the associated hwirq number (such as in the irq_chip +callbacks) then it can be directly obtained from irq_data->hwirq. + +=== Types of irq_domain mappings === +There are several mechanisms available for reverse mapping from hwirq +to Linux irq, and each mechanism uses a different allocation function. +Which reverse map type should be used depends on the use case. Each +of the reverse map types are described below: + +==== Linear ==== +irq_domain_add_linear() + +The linear reverse map maintains a fixed size table indexed by the +hwirq number. When a hwirq is mapped, an irq_desc is allocated for +the hwirq, and the IRQ number is stored in the table. + +The Linear map is a good choice when the maximum number of hwirqs is +fixed and a relatively small number (~ < 256). The advantages of this +map are fixed time lookup for IRQ numbers, and irq_descs are only +allocated for in-use IRQs. The disadvantage is that the table must be +as large as the largest possible hwirq number. + +The majority of drivers should use the linear map. + +==== Tree ==== +irq_domain_add_tree() + +The irq_domain maintains a radix tree map from hwirq numbers to Linux +IRQs. When an hwirq is mapped, an irq_desc is allocated and the +hwirq is used as the lookup key for the radix tree. + +The tree map is a good choice if the hwirq number can be very large +since it doesn't need to allocate a table as large as the largest +hwirq number. The disadvantage is that hwirq to IRQ number lookup is +dependent on how many entries are in the table. + +Very few drivers should need this mapping. + +==== No Map ===- +irq_domain_add_nomap() + +The No Map mapping is to be used when the hwirq number is +programmable in the hardware. In this case it is best to program the +Linux IRQ number into the hardware itself so that no mapping is +required. Calling irq_create_direct_mapping() will allocate a Linux +IRQ number and call the .map() callback so that driver can program the +Linux IRQ number into the hardware. + +Most drivers cannot use this mapping. + +==== Legacy ==== +irq_domain_add_simple() +irq_domain_add_legacy() +irq_domain_add_legacy_isa() + +The Legacy mapping is a special case for drivers that already have a +range of irq_descs allocated for the hwirqs. It is used when the +driver cannot be immediately converted to use the linear mapping. For +example, many embedded system board support files use a set of #defines +for IRQ numbers that are passed to struct device registrations. In that +case the Linux IRQ numbers cannot be dynamically assigned and the legacy +mapping should be used. + +The legacy map assumes a contiguous range of IRQ numbers has already +been allocated for the controller and that the IRQ number can be +calculated by adding a fixed offset to the hwirq number, and +visa-versa. The disadvantage is that it requires the interrupt +controller to manage IRQ allocations and it requires an irq_desc to be +allocated for every hwirq, even if it is unused. + +The legacy map should only be used if fixed IRQ mappings must be +supported. For example, ISA controllers would use the legacy map for +mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ +numbers. + +Most users of legacy mappings should use irq_domain_add_simple() which +will use a legacy domain only if an IRQ range is supplied by the +system and will otherwise use a linear domain mapping. The semantics +of this call are such that if an IRQ range is specified then +descriptors will be allocated on-the-fly for it, and if no range is +specified it will fall through to irq_domain_add_linear() which means +*no* irq descriptors will be allocated. + +A typical use case for simple domains is where an irqchip provider +is supporting both dynamic and static IRQ assignments. + +In order to avoid ending up in a situation where a linear domain is +used and no descriptor gets allocated it is very important to make sure +that the driver using the simple domain call irq_create_mapping() +before any irq_find_mapping() since the latter will actually work +for the static IRQ assignment case. + +==== Hierarchy IRQ domain ==== +On some architectures, there may be multiple interrupt controllers +involved in delivering an interrupt from the device to the target CPU. +Let's look at a typical interrupt delivering path on x86 platforms: + +Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU + +There are three interrupt controllers involved: +1) IOAPIC controller +2) Interrupt remapping controller +3) Local APIC controller + +To support such a hardware topology and make software architecture match +hardware architecture, an irq_domain data structure is built for each +interrupt controller and those irq_domains are organized into hierarchy. +When building irq_domain hierarchy, the irq_domain near to the device is +child and the irq_domain near to CPU is parent. So a hierarchy structure +as below will be built for the example above. + CPU Vector irq_domain (root irq_domain to manage CPU vectors) + ^ + | + Interrupt Remapping irq_domain (manage irq_remapping entries) + ^ + | + IOAPIC irq_domain (manage IOAPIC delivery entries/pins) + +There are four major interfaces to use hierarchy irq_domain: +1) irq_domain_alloc_irqs(): allocate IRQ descriptors and interrupt + controller related resources to deliver these interrupts. +2) irq_domain_free_irqs(): free IRQ descriptors and interrupt controller + related resources associated with these interrupts. +3) irq_domain_activate_irq(): activate interrupt controller hardware to + deliver the interrupt. +3) irq_domain_deactivate_irq(): deactivate interrupt controller hardware + to stop delivering the interrupt. + +Following changes are needed to support hierarchy irq_domain. +1) a new field 'parent' is added to struct irq_domain; it's used to + maintain irq_domain hierarchy information. +2) a new field 'parent_data' is added to struct irq_data; it's used to + build hierarchy irq_data to match hierarchy irq_domains. The irq_data + is used to store irq_domain pointer and hardware irq number. +3) new callbacks are added to struct irq_domain_ops to support hierarchy + irq_domain operations. + +With support of hierarchy irq_domain and hierarchy irq_data ready, an +irq_domain structure is built for each interrupt controller, and an +irq_data structure is allocated for each irq_domain associated with an +IRQ. Now we could go one step further to support stacked(hierarchy) +irq_chip. That is, an irq_chip is associated with each irq_data along +the hierarchy. A child irq_chip may implement a required action by +itself or by cooperating with its parent irq_chip. + +With stacked irq_chip, interrupt controller driver only needs to deal +with the hardware managed by itself and may ask for services from its +parent irq_chip when needed. So we could achieve a much cleaner +software architecture. + +For an interrupt controller driver to support hierarchy irq_domain, it +needs to: +1) Implement irq_domain_ops.alloc and irq_domain_ops.free +2) Optionally implement irq_domain_ops.activate and + irq_domain_ops.deactivate. +3) Optionally implement an irq_chip to manage the interrupt controller + hardware. +4) No need to implement irq_domain_ops.map and irq_domain_ops.unmap, + they are unused with hierarchy irq_domain. + +Hierarchy irq_domain may also be used to support other architectures, +such as ARM, ARM64 etc. -- cgit 1.2.3-korg