From e09b41010ba33a20a87472ee821fa407a5b8da36 Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Mon, 11 Apr 2016 10:41:07 +0300 Subject: These changes are the raw update to linux-4.4.6-rt14. Kernel sources are taken from kernel.org, and rt patch from the rt wiki download page. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen --- kernel/Documentation/DocBook/media/v4l/dev-sdr.xml | 32 +++++++++++++++------- 1 file changed, 22 insertions(+), 10 deletions(-) (limited to 'kernel/Documentation/DocBook/media/v4l/dev-sdr.xml') diff --git a/kernel/Documentation/DocBook/media/v4l/dev-sdr.xml b/kernel/Documentation/DocBook/media/v4l/dev-sdr.xml index f8903568a..a659771f7 100644 --- a/kernel/Documentation/DocBook/media/v4l/dev-sdr.xml +++ b/kernel/Documentation/DocBook/media/v4l/dev-sdr.xml @@ -28,6 +28,16 @@ Devices supporting the SDR receiver interface set the capabilities field of &v4l2-capability; returned by the &VIDIOC-QUERYCAP; ioctl. That flag means the device has an Analog to Digital Converter (ADC), which is a mandatory element for the SDR receiver. + + +Devices supporting the SDR transmitter interface set the +V4L2_CAP_SDR_OUTPUT and +V4L2_CAP_MODULATOR flag in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. That flag means the device has an +Digital to Analog Converter (DAC), which is a mandatory element for the SDR transmitter. + + At least one of the read/write, streaming or asynchronous I/O methods must be supported. @@ -39,15 +49,16 @@ be supported. SDR devices can support controls, and must support the tuner ioctls. Tuner ioctls are used -for setting the ADC sampling rate (sampling frequency) and the possible RF tuner -frequency. +for setting the ADC/DAC sampling rate (sampling frequency) and the possible +radio frequency (RF). -The V4L2_TUNER_ADC tuner type is used for ADC tuners, and -the V4L2_TUNER_RF tuner type is used for RF tuners. The -tuner index of the RF tuner (if any) must always follow the ADC tuner index. -Normally the ADC tuner is #0 and the RF tuner is #1. +The V4L2_TUNER_SDR tuner type is used for setting SDR +device ADC/DAC frequency, and the V4L2_TUNER_RF +tuner type is used for setting radio frequency. +The tuner index of the RF tuner (if any) must always follow the SDR tuner index. +Normally the SDR tuner is #0 and the RF tuner is #1. @@ -59,9 +70,9 @@ The &VIDIOC-S-HW-FREQ-SEEK; ioctl is not supported. Data Format Negotiation -The SDR capture device uses the format ioctls to -select the capture format. Both the sampling resolution and the data streaming -format are bound to that selectable format. In addition to the basic +The SDR device uses the format ioctls to +select the capture and output format. Both the sampling resolution and the data +streaming format are bound to that selectable format. In addition to the basic format ioctls, the &VIDIOC-ENUM-FMT; ioctl must be supported as well. @@ -69,7 +80,8 @@ must be supported as well. To use the format ioctls applications set the type field of a &v4l2-format; to -V4L2_BUF_TYPE_SDR_CAPTURE and use the &v4l2-sdr-format; +V4L2_BUF_TYPE_SDR_CAPTURE or +V4L2_BUF_TYPE_SDR_OUTPUT and use the &v4l2-sdr-format; sdr member of the fmt union as needed per the desired operation. Currently there is two fields, pixelformat and -- cgit 1.2.3-korg