From 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 Mon Sep 17 00:00:00 2001 From: Yunhong Jiang Date: Tue, 4 Aug 2015 12:17:53 -0700 Subject: Add the rt linux 4.1.3-rt3 as base Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang --- .../DocBook/media/v4l/dev-raw-vbi.xml | 345 +++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 kernel/Documentation/DocBook/media/v4l/dev-raw-vbi.xml (limited to 'kernel/Documentation/DocBook/media/v4l/dev-raw-vbi.xml') diff --git a/kernel/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/kernel/Documentation/DocBook/media/v4l/dev-raw-vbi.xml new file mode 100644 index 000000000..f4b61b6ce --- /dev/null +++ b/kernel/Documentation/DocBook/media/v4l/dev-raw-vbi.xml @@ -0,0 +1,345 @@ + Raw VBI Data Interface + + VBI is an abbreviation of Vertical Blanking Interval, a gap +in the sequence of lines of an analog video signal. During VBI +no picture information is transmitted, allowing some time while the +electron beam of a cathode ray tube TV returns to the top of the +screen. Using an oscilloscope you will find here the vertical +synchronization pulses and short data packages ASK +modulatedASK: Amplitude-Shift Keying. A high signal +level represents a '1' bit, a low level a '0' bit. +onto the video signal. These are transmissions of services such as +Teletext or Closed Caption. + + Subject of this interface type is raw VBI data, as sampled off +a video signal, or to be added to a signal for output. +The data format is similar to uncompressed video images, a number of +lines times a number of samples per line, we call this a VBI image. + + Conventionally V4L2 VBI devices are accessed through character +device special files named /dev/vbi and +/dev/vbi0 to /dev/vbi31 with +major number 81 and minor numbers 224 to 255. +/dev/vbi is typically a symbolic link to the +preferred VBI device. This convention applies to both input and output +devices. + + To address the problems of finding related video and VBI +devices VBI capturing and output is also available as device function +under /dev/video. To capture or output raw VBI +data with these devices applications must call the &VIDIOC-S-FMT; +ioctl. Accessed as /dev/vbi, raw VBI capturing +or output is the default device function. + +
+ Querying Capabilities + + Devices supporting the raw VBI capturing or output API set +the V4L2_CAP_VBI_CAPTURE or +V4L2_CAP_VBI_OUTPUT flags, respectively, in the +capabilities field of &v4l2-capability; +returned by the &VIDIOC-QUERYCAP; ioctl. At least one of the +read/write, streaming or asynchronous I/O methods must be +supported. VBI devices may or may not have a tuner or modulator. +
+ +
+ Supplemental Functions + + VBI devices shall support video +input or output, tuner or +modulator, and controls ioctls +as needed. The video standard ioctls provide +information vital to program a VBI device, therefore must be +supported. +
+ +
+ Raw VBI Format Negotiation + + Raw VBI sampling abilities can vary, in particular the +sampling frequency. To properly interpret the data V4L2 specifies an +ioctl to query the sampling parameters. Moreover, to allow for some +flexibility applications can also suggest different parameters. + + As usual these parameters are not +reset at &func-open; time to permit Unix tool chains, programming a +device and then reading from it as if it was a plain file. Well +written V4L2 applications should always ensure they really get what +they want, requesting reasonable parameters and then checking if the +actual parameters are suitable. + + To query the current raw VBI capture parameters +applications set the type field of a +&v4l2-format; to V4L2_BUF_TYPE_VBI_CAPTURE or +V4L2_BUF_TYPE_VBI_OUTPUT, and call the +&VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill +the &v4l2-vbi-format; vbi member of the +fmt union. + + To request different parameters applications set the +type field of a &v4l2-format; as above and +initialize all fields of the &v4l2-vbi-format; +vbi member of the +fmt union, or better just modify the +results of VIDIOC_G_FMT, and call the +&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers return +an &EINVAL; only when the given parameters are ambiguous, otherwise +they modify the parameters according to the hardware capabilites and +return the actual parameters. When the driver allocates resources at +this point, it may return an &EBUSY; to indicate the returned +parameters are valid but the required resources are currently not +available. That may happen for instance when the video and VBI areas +to capture would overlap, or when the driver supports multiple opens +and another process already requested VBI capturing or output. Anyway, +applications must expect other resource allocation points which may +return EBUSY, at the &VIDIOC-STREAMON; ioctl +and the first read(), write() and select() call. + + VBI devices must implement both the +VIDIOC_G_FMT and +VIDIOC_S_FMT ioctl, even if +VIDIOC_S_FMT ignores all requests and always +returns default parameters as VIDIOC_G_FMT does. +VIDIOC_TRY_FMT is optional. + + + struct <structname>v4l2_vbi_format</structname> + + &cs-str; + + + __u32 + sampling_rate + Samples per second, i. e. unit 1 Hz. + + + __u32 + offset + Horizontal offset of the VBI image, +relative to the leading edge of the line synchronization pulse and +counted in samples: The first sample in the VBI image will be located +offset / +sampling_rate seconds following the leading +edge. See also . + + + __u32 + samples_per_line + + + + __u32 + sample_format + Defines the sample format as in , a four-character-code. + A few devices may be unable to +sample VBI data at all but can extend the video capture window to the +VBI region. + Usually this is +V4L2_PIX_FMT_GREY, i. e. each sample +consists of 8 bits with lower values oriented towards the black level. +Do not assume any other correlation of values with the signal level. +For example, the MSB does not necessarily indicate if the signal is +'high' or 'low' because 128 may not be the mean value of the +signal. Drivers shall not convert the sample format by software. + + + __u32 + start[2] + This is the scanning system line number +associated with the first line of the VBI image, of the first and the +second field respectively. See and + for valid values. +The V4L2_VBI_ITU_525_F1_START, +V4L2_VBI_ITU_525_F2_START, +V4L2_VBI_ITU_625_F1_START and +V4L2_VBI_ITU_625_F2_START defines give the start line +numbers for each field for each 525 or 625 line format as a convenience. +Don't forget that ITU line numbering starts at 1, not 0. +VBI input drivers can return start values 0 if the hardware cannot +reliable identify scanning lines, VBI acquisition may not require this +information. + + + __u32 + count[2] + The number of lines in the first and second +field image, respectively. + + + Drivers should be as +flexibility as possible. For example, it may be possible to extend or +move the VBI capture window down to the picture area, implementing a +'full field mode' to capture data service transmissions embedded in +the picture.An application can set the first or second +count value to zero if no data is required +from the respective field; count[1] if the +scanning system is progressive, &ie; not interlaced. The +corresponding start value shall be ignored by the application and +driver. Anyway, drivers may not support single field capturing and +return both count values non-zero.Both +count values set to zero, or line numbers +outside the bounds depicted in and , or a field image covering +lines of two fields, are invalid and shall not be returned by the +driver.To initialize the start +and count fields, applications must first +determine the current video standard selection. The &v4l2-std-id; or +the framelines field of &v4l2-standard; can +be evaluated for this purpose. + + + __u32 + flags + See below. Currently +only drivers set flags, applications must set this field to +zero. + + + __u32 + reserved[2] + This array is reserved for future extensions. +Drivers and applications must set it to zero. + + + +
+ + + Raw VBI Format Flags + + &cs-def; + + + V4L2_VBI_UNSYNC + 0x0001 + This flag indicates hardware which does not +properly distinguish between fields. Normally the VBI image stores the +first field (lower scanning line numbers) first in memory. This may be +a top or bottom field depending on the video standard. When this flag +is set the first or second field may be stored first, however the +fields are still in correct temporal order with the older field first +in memory. + Most VBI services transmit on both fields, but +some have different semantics depending on the field number. These +cannot be reliable decoded or encoded when +V4L2_VBI_UNSYNC is set. + + + + V4L2_VBI_INTERLACED + 0x0002 + By default the two field images will be passed +sequentially; all lines of the first field followed by all lines of +the second field (compare +V4L2_FIELD_SEQ_TB and +V4L2_FIELD_SEQ_BT, whether the top or bottom +field is first in memory depends on the video standard). When this +flag is set, the two fields are interlaced (cf. +V4L2_FIELD_INTERLACED). The first line of the +first field followed by the first line of the second field, then the +two second lines, and so on. Such a layout may be necessary when the +hardware has been programmed to capture or output interlaced video +images and is unable to separate the fields for VBI capturing at +the same time. For simplicity setting this flag implies that both +count values are equal and non-zero. + + + +
+ +
+ Line synchronization + + + + + + + + + Line synchronization diagram + + +
+ +
+ ITU-R 525 line numbering (M/NTSC and M/PAL) + + + + + + + + + NTSC field synchronization diagram + + + (1) For the purpose of this specification field 2 +starts in line 264 and not 263.5 because half line capturing is not +supported. + + +
+ +
+ ITU-R 625 line numbering + + + + + + + + + PAL/SECAM field synchronization diagram + + + (1) For the purpose of this specification field 2 +starts in line 314 and not 313.5 because half line capturing is not +supported. + + +
+ + Remember the VBI image format depends on the selected +video standard, therefore the application must choose a new standard or +query the current standard first. Attempts to read or write data ahead +of format negotiation, or after switching the video standard which may +invalidate the negotiated VBI parameters, should be refused by the +driver. A format change during active I/O is not permitted. +
+ +
+ Reading and writing VBI images + + To assure synchronization with the field number and easier +implementation, the smallest unit of data passed at a time is one +frame, consisting of two fields of VBI images immediately following in +memory. + + The total size of a frame computes as follows: + + +(count[0] + count[1]) * +samples_per_line * sample size in bytes + + The sample size is most likely always one byte, +applications must check the sample_format +field though, to function properly with other drivers. + + A VBI device may support read/write and/or streaming (memory mapping or user pointer) I/O. The latter bears the +possibility of synchronizing video and +VBI data by using buffer timestamps. + + Remember the &VIDIOC-STREAMON; ioctl and the first read(), +write() and select() call can be resource allocation points returning +an &EBUSY; if the required hardware resources are temporarily +unavailable, for example the device is already in use by another +process. +
-- cgit 1.2.3-korg