From b04935b08394a9b64b69429215e27f0323065bfa Mon Sep 17 00:00:00 2001 From: kalyanreddy Date: Tue, 28 Mar 2017 11:34:11 +0530 Subject: Update documentation structure. This patch is used to update documentation structure. Change-Id: I50d4ef4256ccfc57a0434123e7532a50000582cf Co-Authored by:Srinivas Co-Authored by:RajithaY Co-Authored by:shravani paladugula Co-Authored by:Navya Bathula Signed-off-by: Gundarapu Kalyan Reddy (cherry picked from commit f1f3cc27f23bdde81c37d8142d4288d811bd5e45) --- .../userguide/Ftrace.debugging.tool.userguide.rst | 259 +++++++++ docs/release/userguide/abstract.rst | 16 + docs/release/userguide/common.platform.render.rst | 15 + .../release/userguide/feature.userguide.render.rst | 14 + docs/release/userguide/images/Cpustress-Idle.png | Bin 0 -> 52980 bytes .../userguide/images/Dashboard-screenshot-1.png | Bin 0 -> 88894 bytes .../userguide/images/Dashboard-screenshot-2.png | Bin 0 -> 77862 bytes docs/release/userguide/images/Guest_Scenario.png | Bin 0 -> 17182 bytes docs/release/userguide/images/Host_Scenario.png | Bin 0 -> 14320 bytes docs/release/userguide/images/IOstress-Idle.png | Bin 0 -> 57656 bytes docs/release/userguide/images/IXIA1.png | Bin 0 -> 11667 bytes docs/release/userguide/images/Idle-Idle.png | Bin 0 -> 52768 bytes .../release/userguide/images/Memorystress-Idle.png | Bin 0 -> 72474 bytes docs/release/userguide/images/SRIOV_Scenario.png | Bin 0 -> 16525 bytes docs/release/userguide/images/UseCaseDashboard.png | Bin 0 -> 87632 bytes .../userguide/images/cpu-stress-idle-test-type.png | Bin 0 -> 17822 bytes .../userguide/images/dashboard-architecture.png | Bin 0 -> 80036 bytes docs/release/userguide/images/guest_pk_fw.png | Bin 0 -> 8020 bytes docs/release/userguide/images/host_pk_fw.png | Bin 0 -> 5390 bytes .../userguide/images/idle-idle-test-type.png | Bin 0 -> 14902 bytes .../userguide/images/io-stress-idle-test-type.png | Bin 0 -> 18983 bytes .../images/memory-stress-idle-test-type.png | Bin 0 -> 18727 bytes docs/release/userguide/images/sriov_pk_fw.png | Bin 0 -> 5864 bytes docs/release/userguide/index.rst | 25 + docs/release/userguide/introduction.rst | 88 +++ .../kvmfornfv.cyclictest-dashboard.userguide.rst | 318 +++++++++++ .../release/userguide/live_migration.userguide.rst | 121 ++++ docs/release/userguide/lmdowntime.jpg | Bin 0 -> 6372 bytes docs/release/userguide/lmnetwork.jpg | Bin 0 -> 53332 bytes docs/release/userguide/lmtotaltime.jpg | Bin 0 -> 24171 bytes docs/release/userguide/low_latency.userguide.rst | 264 +++++++++ docs/release/userguide/openstack.rst | 51 ++ .../userguide/packet_forwarding.userguide.rst | 633 +++++++++++++++++++++ docs/release/userguide/pcm_utility.userguide.rst | 141 +++++ docs/release/userguide/tuning.userguide.rst | 102 ++++ 35 files changed, 2047 insertions(+) create mode 100644 docs/release/userguide/Ftrace.debugging.tool.userguide.rst create mode 100644 docs/release/userguide/abstract.rst create mode 100644 docs/release/userguide/common.platform.render.rst create mode 100644 docs/release/userguide/feature.userguide.render.rst create mode 100644 docs/release/userguide/images/Cpustress-Idle.png create mode 100644 docs/release/userguide/images/Dashboard-screenshot-1.png create mode 100644 docs/release/userguide/images/Dashboard-screenshot-2.png create mode 100644 docs/release/userguide/images/Guest_Scenario.png create mode 100644 docs/release/userguide/images/Host_Scenario.png create mode 100644 docs/release/userguide/images/IOstress-Idle.png create mode 100644 docs/release/userguide/images/IXIA1.png create mode 100644 docs/release/userguide/images/Idle-Idle.png create mode 100644 docs/release/userguide/images/Memorystress-Idle.png create mode 100644 docs/release/userguide/images/SRIOV_Scenario.png create mode 100644 docs/release/userguide/images/UseCaseDashboard.png create mode 100644 docs/release/userguide/images/cpu-stress-idle-test-type.png create mode 100644 docs/release/userguide/images/dashboard-architecture.png create mode 100644 docs/release/userguide/images/guest_pk_fw.png create mode 100644 docs/release/userguide/images/host_pk_fw.png create mode 100644 docs/release/userguide/images/idle-idle-test-type.png create mode 100644 docs/release/userguide/images/io-stress-idle-test-type.png create mode 100644 docs/release/userguide/images/memory-stress-idle-test-type.png create mode 100644 docs/release/userguide/images/sriov_pk_fw.png create mode 100644 docs/release/userguide/index.rst create mode 100644 docs/release/userguide/introduction.rst create mode 100644 docs/release/userguide/kvmfornfv.cyclictest-dashboard.userguide.rst create mode 100644 docs/release/userguide/live_migration.userguide.rst create mode 100644 docs/release/userguide/lmdowntime.jpg create mode 100644 docs/release/userguide/lmnetwork.jpg create mode 100644 docs/release/userguide/lmtotaltime.jpg create mode 100644 docs/release/userguide/low_latency.userguide.rst create mode 100644 docs/release/userguide/openstack.rst create mode 100644 docs/release/userguide/packet_forwarding.userguide.rst create mode 100644 docs/release/userguide/pcm_utility.userguide.rst create mode 100644 docs/release/userguide/tuning.userguide.rst (limited to 'docs/release/userguide') diff --git a/docs/release/userguide/Ftrace.debugging.tool.userguide.rst b/docs/release/userguide/Ftrace.debugging.tool.userguide.rst new file mode 100644 index 000000000..95b7f8fe5 --- /dev/null +++ b/docs/release/userguide/Ftrace.debugging.tool.userguide.rst @@ -0,0 +1,259 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +===================== +FTrace Debugging Tool +===================== + +About Ftrace +------------- +Ftrace is an internal tracer designed to find what is going on inside the kernel. It can be used +for debugging or analyzing latencies and performance related issues that take place outside of +user-space. Although ftrace is typically considered the function tracer, it is really a frame +work of several assorted tracing utilities. + + One of the most common uses of ftrace is the event tracing. + +**Note:** +- For KVM4NFV, Ftrace is preferred as it is in-built kernel tool +- More stable compared to other debugging tools + +Version Features +---------------- + ++-----------------------------+-----------------------------------------------+ +| | | +| **Release** | **Features** | +| | | ++=============================+===============================================+ +| | - Ftrace Debugging tool is not implemented in | +| Colorado | Colorado release of KVM4NFV | +| | | ++-----------------------------+-----------------------------------------------+ +| | - Ftrace aids in debugging the KVM4NFV | +| Danube | 4.4-linux-kernel level issues | +| | - Option to disable if not required | ++-----------------------------+-----------------------------------------------+ + + +Implementation of Ftrace +------------------------- +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. + +When debugfs is configured into the kernel (which selecting any ftrace +option will do) the directory /sys/kernel/debug will be created. To mount +this directory, you can add to your /etc/fstab file: + +.. code:: bash + + debugfs /sys/kernel/debug debugfs defaults 0 0 + +Or you can mount it at run time with: + +.. code:: bash + + mount -t debugfs nodev /sys/kernel/debug + +Some configurations for Ftrace are used for other purposes, like finding latency or analyzing the system. For the purpose of debugging, the kernel configuration parameters that should be enabled are: + +.. code:: bash + + CONFIG_FUNCTION_TRACER=y + CONFIG_FUNCTION_GRAPH_TRACER=y + CONFIG_STACK_TRACER=y + CONFIG_DYNAMIC_FTRACE=y + +The above parameters must be enabled in /boot/config-4.4.0-el7.x86_64 i.e., kernel config file for ftrace to work. If not enabled, change the parameter to ``y`` and run., + +.. code:: bash + + On CentOS + grub2-mkconfig -o /boot/grub2/grub.cfg + sudo reboot + +Re-check the parameters after reboot before running ftrace. + +Files in Ftrace: +---------------- +The below is a list of few major files in Ftrace. + + ``current_tracer:`` + + This is used to set or display the current tracer that is configured. + + ``available_tracers:`` + + This holds the different types of tracers that have been compiled into the kernel. The tracers listed here can be configured by echoing their name into current_tracer. + + ``tracing_on:`` + + This sets or displays whether writing to the tracering buffer is enabled. Echo 0 into this file to disable the tracer or 1 to enable it. + + ``trace:`` + + This file holds the output of the trace in a human readable format. + + ``tracing_cpumask:`` + + This is a mask that lets the user only trace on specified CPUs. The format is a hex string representing the CPUs. + + ``events:`` + + It holds event tracepoints (also known as static tracepoints) that have been compiled into the kernel. It shows what event tracepoints exist and how they are grouped by system. + + +Avaliable Tracers +----------------- + +Here is the list of current tracers that may be configured based on usage. + +- function +- function_graph +- irqsoff +- preemptoff +- preemptirqsoff +- wakeup +- wakeup_rt + +Brief about a few: + + ``function:`` + + Function call tracer to trace all kernel functions. + + ``function_graph:`` + + Similar to the function tracer except that the function tracer probes the functions on their entry whereas the function graph tracer traces on both entry and exit of the functions. + + ``nop:`` + + This is the "trace nothing" tracer. To remove tracers from tracing simply echo "nop" into current_tracer. + +Examples: + +.. code:: bash + + + To list available tracers: + [tracing]# cat available_tracers + function_graph function wakeup wakeup_rt preemptoff irqsoff preemptirqsoff nop + + Usage: + [tracing]# echo function > current_tracer + [tracing]# cat current_tracer + function + + To view output: + [tracing]# cat trace | head -10 + + To Stop tracing: + [tracing]# echo 0 > tracing_on + + To Start/restart tracing: + [tracing]# echo 1 > tracing_on; + + +Ftrace in KVM4NFV +----------------- +Ftrace is part of KVM4NFV D-Release. KVM4NFV built 4.4-linux-Kernel will be tested by +executing cyclictest and analyzing the results/latency values (max, min, avg) generated. +Ftrace (or) function tracer is a stable kernel inbuilt debugging tool which tests real time +kernel and outputs a log as part of the code. These output logs are useful in following ways. + + - Kernel Debugging. + - Helps in Kernel code optimization and + - Can be used to better understand the kernel level code flow + +Ftrace logs for KVM4NFV can be found `here`_: + + +.. _here: http://artifacts.opnfv.org/kvmfornfv.html + +Ftrace Usage in KVM4NFV Kernel Debugging: +----------------------------------------- +Kvm4nfv has two scripts in /ci/envs to provide ftrace tool: + + - enable_trace.sh + - disable_trace.sh + +.. code:: bash + + Found at., + $ cd kvmfornfv/ci/envs + +Enabling Ftrace in KVM4NFV +-------------------------- + +The enable_trace.sh script is triggered by changing ftrace_enable value in test_kvmfornfv.sh +script to 1 (which is zero by default). Change as below to enable Ftrace. + +.. code:: bash + + ftrace_enable=1 + +Note: + +- Ftrace is enabled before + +Details of enable_trace script +------------------------------ + +- CPU coremask is calculated using getcpumask() +- All the required events are enabled by, + echoing "1" to $TRACEDIR/events/event_name/enable file + +Example, + +.. code:: bash + + $TRACEDIR = /sys/kernel/debug/tracing/ + sudo bash -c "echo 1 > $TRACEDIR/events/irq/enable" + sudo bash -c "echo 1 > $TRACEDIR/events/task/enable" + sudo bash -c "echo 1 > $TRACEDIR/events/syscalls/enable" + +The set_event file contains all the enabled events list + +- Function tracer is selected. May be changed to other avaliable tracers based on requirement + +.. code:: bash + + sudo bash -c "echo function > $TRACEDIR/current_tracer + +- When tracing is turned ON by setting ``tracing_on=1``, the ``trace`` file keeps getting append with the traced data until ``tracing_on=0`` and then ftrace_buffer gets cleared. + +.. code:: bash + + To Stop/Pause, + echo 0 >tracing_on; + + To Start/Restart, + echo 1 >tracing_on; + +- Once tracing is diabled, disable_trace.sh script is triggered. + +Details of disable_trace Script +------------------------------- +In disable trace script the following are done: + +- The trace file is copied and moved to /tmp folder based on timestamp +- The current tracer file is set to ``nop`` +- The set_event file is cleared i.e., all the enabled events are disabled +- Kernel Ftrace is disabled/unmounted + + +Publishing Ftrace logs: +----------------------- +The generated trace log is pushed to `artifacts`_ by kvmfornfv-upload-artifact.sh +script available in releng which will be triggered as a part of kvm4nfv daily job. +The `trigger`_ in the script is., + +.. code:: bash + + echo "Uploading artifacts for future debugging needs...." + gsutil cp -r $WORKSPACE/build_output/log-*.tar.gz $GS_LOG_LOCATION > $WORKSPACE/gsutil.log 2>&1 + +.. _artifacts: https://artifacts.opnfv.org/ + +.. _trigger: https://gerrit.opnfv.org/gerrit/gitweb?p=releng.git;a=blob;f=jjb/kvmfornfv/kvmfornfv-upload-artifact.sh;h=56fb4f9c18a83c689a916dc6c85f9e3ddf2479b2;hb=HEAD#l53 diff --git a/docs/release/userguide/abstract.rst b/docs/release/userguide/abstract.rst new file mode 100644 index 000000000..ec05b2560 --- /dev/null +++ b/docs/release/userguide/abstract.rst @@ -0,0 +1,16 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +================== +Userguide Abstract +================== + +In KVM4NFV project, we focus on the KVM hypervisor to enhance it for NFV, +by looking at the following areas initially- + +* Minimal Interrupt latency variation for data plane VNFs: + * Minimal Timing Variation for Timing correctness of real-time VNFs + * Minimal packet latency variation for data-plane VNFs +* Inter-VM communication +* Fast live migration diff --git a/docs/release/userguide/common.platform.render.rst b/docs/release/userguide/common.platform.render.rst new file mode 100644 index 000000000..46b4707a3 --- /dev/null +++ b/docs/release/userguide/common.platform.render.rst @@ -0,0 +1,15 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +================================ +Using common platform components +================================ + +This section outlines basic usage principals and methods for some of the +commonly deployed components of supported OPNFV scenario's in Danube. +The subsections provide an outline of how these components are commonly +used and how to address them in an OPNFV deployment.The components derive +from autonomous upstream communities and where possible this guide will +provide direction to the relevant documentation made available by those +communities to better help you navigate the OPNFV deployment. diff --git a/docs/release/userguide/feature.userguide.render.rst b/docs/release/userguide/feature.userguide.render.rst new file mode 100644 index 000000000..3bed21fc9 --- /dev/null +++ b/docs/release/userguide/feature.userguide.render.rst @@ -0,0 +1,14 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +========================== +Using Danube Features +========================== + +The following sections of the user guide provide feature specific usage +guidelines and references for KVM4NFV project. + +* /docs/userguide/low_latency.userguide.rst +* /docs/userguide/live_migration.userguide.rst +* /docs/userguide/tuning.userguide.rst diff --git a/docs/release/userguide/images/Cpustress-Idle.png b/docs/release/userguide/images/Cpustress-Idle.png new file mode 100644 index 000000000..b4b4e1112 Binary files /dev/null and b/docs/release/userguide/images/Cpustress-Idle.png differ diff --git a/docs/release/userguide/images/Dashboard-screenshot-1.png b/docs/release/userguide/images/Dashboard-screenshot-1.png new file mode 100644 index 000000000..7ff809697 Binary files /dev/null and b/docs/release/userguide/images/Dashboard-screenshot-1.png differ diff --git a/docs/release/userguide/images/Dashboard-screenshot-2.png b/docs/release/userguide/images/Dashboard-screenshot-2.png new file mode 100644 index 000000000..a5c4e01b5 Binary files /dev/null and b/docs/release/userguide/images/Dashboard-screenshot-2.png differ diff --git a/docs/release/userguide/images/Guest_Scenario.png b/docs/release/userguide/images/Guest_Scenario.png new file mode 100644 index 000000000..550c0fe6f Binary files /dev/null and b/docs/release/userguide/images/Guest_Scenario.png differ diff --git a/docs/release/userguide/images/Host_Scenario.png b/docs/release/userguide/images/Host_Scenario.png new file mode 100644 index 000000000..89789aa7b Binary files /dev/null and b/docs/release/userguide/images/Host_Scenario.png differ diff --git a/docs/release/userguide/images/IOstress-Idle.png b/docs/release/userguide/images/IOstress-Idle.png new file mode 100644 index 000000000..fe4e5fc81 Binary files /dev/null and b/docs/release/userguide/images/IOstress-Idle.png differ diff --git a/docs/release/userguide/images/IXIA1.png b/docs/release/userguide/images/IXIA1.png new file mode 100644 index 000000000..682de7c57 Binary files /dev/null and b/docs/release/userguide/images/IXIA1.png differ diff --git a/docs/release/userguide/images/Idle-Idle.png b/docs/release/userguide/images/Idle-Idle.png new file mode 100644 index 000000000..d619f65ea Binary files /dev/null and b/docs/release/userguide/images/Idle-Idle.png differ diff --git a/docs/release/userguide/images/Memorystress-Idle.png b/docs/release/userguide/images/Memorystress-Idle.png new file mode 100644 index 000000000..b9974a7a2 Binary files /dev/null and b/docs/release/userguide/images/Memorystress-Idle.png differ diff --git a/docs/release/userguide/images/SRIOV_Scenario.png b/docs/release/userguide/images/SRIOV_Scenario.png new file mode 100644 index 000000000..62e116ada Binary files /dev/null and b/docs/release/userguide/images/SRIOV_Scenario.png differ diff --git a/docs/release/userguide/images/UseCaseDashboard.png b/docs/release/userguide/images/UseCaseDashboard.png new file mode 100644 index 000000000..9dd14d26e Binary files /dev/null and b/docs/release/userguide/images/UseCaseDashboard.png differ diff --git a/docs/release/userguide/images/cpu-stress-idle-test-type.png b/docs/release/userguide/images/cpu-stress-idle-test-type.png new file mode 100644 index 000000000..9a5bdf6de Binary files /dev/null and b/docs/release/userguide/images/cpu-stress-idle-test-type.png differ diff --git a/docs/release/userguide/images/dashboard-architecture.png b/docs/release/userguide/images/dashboard-architecture.png new file mode 100644 index 000000000..821484e74 Binary files /dev/null and b/docs/release/userguide/images/dashboard-architecture.png differ diff --git a/docs/release/userguide/images/guest_pk_fw.png b/docs/release/userguide/images/guest_pk_fw.png new file mode 100644 index 000000000..5f80ecce5 Binary files /dev/null and b/docs/release/userguide/images/guest_pk_fw.png differ diff --git a/docs/release/userguide/images/host_pk_fw.png b/docs/release/userguide/images/host_pk_fw.png new file mode 100644 index 000000000..dcbe921f2 Binary files /dev/null and b/docs/release/userguide/images/host_pk_fw.png differ diff --git a/docs/release/userguide/images/idle-idle-test-type.png b/docs/release/userguide/images/idle-idle-test-type.png new file mode 100644 index 000000000..bd241bfe1 Binary files /dev/null and b/docs/release/userguide/images/idle-idle-test-type.png differ diff --git a/docs/release/userguide/images/io-stress-idle-test-type.png b/docs/release/userguide/images/io-stress-idle-test-type.png new file mode 100644 index 000000000..f79cb5984 Binary files /dev/null and b/docs/release/userguide/images/io-stress-idle-test-type.png differ diff --git a/docs/release/userguide/images/memory-stress-idle-test-type.png b/docs/release/userguide/images/memory-stress-idle-test-type.png new file mode 100644 index 000000000..1ca839a4a Binary files /dev/null and b/docs/release/userguide/images/memory-stress-idle-test-type.png differ diff --git a/docs/release/userguide/images/sriov_pk_fw.png b/docs/release/userguide/images/sriov_pk_fw.png new file mode 100644 index 000000000..bf7ad6f9b Binary files /dev/null and b/docs/release/userguide/images/sriov_pk_fw.png differ diff --git a/docs/release/userguide/index.rst b/docs/release/userguide/index.rst new file mode 100644 index 000000000..ff6898746 --- /dev/null +++ b/docs/release/userguide/index.rst @@ -0,0 +1,25 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +.. _kvmfornfv-userguide: + +****************** +KVM4NFV User Guide +****************** + +.. toctree:: + :maxdepth: 3 + + ./abstract.rst + ./introduction.rst + ./common.platform.render.rst + ./feature.userguide.render.rst + ./Ftrace.debugging.tool.userguide.rst + ./kvmfornfv.cyclictest-dashboard.userguide.rst + ./low_latency.userguide.rst + ./live_migration.userguide.rst + ./openstack.rst + ./packet_forwarding.userguide.rst + ./pcm_utility.userguide.rst + ./tuning.userguide.rst diff --git a/docs/release/userguide/introduction.rst b/docs/release/userguide/introduction.rst new file mode 100644 index 000000000..d4ee81143 --- /dev/null +++ b/docs/release/userguide/introduction.rst @@ -0,0 +1,88 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +====================== +Userguide Introduction +====================== + +Overview +-------- + +The project "NFV Hypervisors-KVM" makes collaborative efforts to enable NFV +features for existing hypervisors, which are not necessarily designed or +targeted to meet the requirements for the NFVI.The KVM4NFV scenario +consists of Continuous Integration builds, deployments and testing +combinations of virtual infrastructure components. + +KVM4NFV Features +---------------- + +Using this project, the following areas are targeted- + +* Minimal Interrupt latency variation for data plane VNFs: + * Minimal Timing Variation for Timing correctness of real-time VNFs + * Minimal packet latency variation for data-plane VNFs +* Inter-VM communication +* Fast live migration + +Some of the above items would require software development and/or specific +hardware features, and some need just configurations information for the +system (hardware, BIOS, OS, etc.). + +We include a requirements gathering stage as a formal part of the project. +For each subproject, we will start with an organized requirement stage so +that we can determine specific use cases (e.g. what kind of VMs should be +live migrated) and requirements (e.g. interrupt latency, jitters, Mpps, +migration-time, down-time, etc.) to set out the performance goals. + +Potential future projects would include: + +* Dynamic scaling (via scale-out) using VM instantiation +* Fast live migration for SR-IOV + +The user guide outlines how to work with key components and features in +the platform, each feature description section will indicate the scenarios +that provide the components and configurations required to use it. + +The configuration guide details which scenarios are best for you and how to +install and configure them. + +General usage guidelines +------------------------ + +The user guide for KVM4NFV features and capabilities provide step by step +instructions for using features that have been configured according to the +installation and configuration instructions. + +Scenarios User Guide +-------------------- + +The procedure to deploy/test `KVM4NFV scenarios`_ in a nested virtualization +or on bare-metal environment is mentioned in the below link. The kvm4nfv user guide can +be found at docs/scenarios + +.. code:: bash + + http://artifacts.opnfv.org/kvmfornfv/docs/index.html#kvmfornfv-scenarios-overview-and-description + +.. _KVM4NFV scenarios: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#kvmfornfv-scenarios-overview-and-description + +The deployment has been verified for `os-nosdn-kvm-ha`_, os-nosdn-kvm-noha, `os-nosdn-kvm_ovs_dpdk-ha`_, +`os-nosdn-kvm_ovs_dpdk-noha`_ and `os-nosdn-kvm_ovs_dpdk_bar-ha`_, `os-nosdn-kvm_ovs_dpdk_bar-noha`_ test scenarios. + +For brief view of the above scenarios use: + +.. code:: bash + + http://artifacts.opnfv.org/kvmfornfv/docs/index.html#scenario-abstract + +.. _os-nosdn-kvm-ha: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#kvmfornfv-scenarios-overview-and-description + +.. _os-nosdn-kvm_ovs_dpdk-ha: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#os-nosdn-kvm-nfv-ovs-dpdk-ha-overview-and-description + +.. _os-nosdn-kvm_ovs_dpdk-noha: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#os-nosdn-kvm-nfv-ovs-dpdk-noha-overview-and-description + +.. _os-nosdn-kvm_ovs_dpdk_bar-ha: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#os-nosdn-kvm-nfv-ovs-dpdk_bar-ha-overview-and-description + +.. _os-nosdn-kvm_ovs_dpdk_bar-noha: http://artifacts.opnfv.org/kvmfornfv/docs/index.html#os-nosdn-kvm-nfv-ovs-dpdk_bar-noha-overview-and-description diff --git a/docs/release/userguide/kvmfornfv.cyclictest-dashboard.userguide.rst b/docs/release/userguide/kvmfornfv.cyclictest-dashboard.userguide.rst new file mode 100644 index 000000000..468f471e7 --- /dev/null +++ b/docs/release/userguide/kvmfornfv.cyclictest-dashboard.userguide.rst @@ -0,0 +1,318 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +======================= +KVM4NFV Dashboard Guide +======================= + +Dashboard for KVM4NFV Daily Test Results +---------------------------------------- + +Abstract +-------- + +This chapter explains the procedure to configure the InfluxDB and Grafana on Node1 or Node2 +depending on the testtype to publish KVM4NFV test results. The cyclictest cases are executed +and results are published on Yardstick Dashboard(Grafana). InfluxDB is the database which will +store the cyclictest results and Grafana is a visualisation suite to view the maximum,minimum and +average values of the time series data of cyclictest results.The framework is shown in below image. + +.. figure:: images/dashboard-architecture.png + :name: dashboard-architecture + :width: 100% + :align: center + +Version Features +---------------- + ++-----------------------------+--------------------------------------------+ +| | | +| **Release** | **Features** | +| | | ++=============================+============================================+ +| | - Data published in Json file format | +| Colorado | - No database support to store the test's | +| | latency values of cyclictest | +| | - For each run, the previous run's output | +| | file is replaced with a new file with | +| | currents latency values. | ++-----------------------------+--------------------------------------------+ +| | - Test results are stored in Influxdb | +| | - Graphical representation of the latency | +| Danube | values using Grafana suite. (Dashboard) | +| | - Supports graphical view for multiple | +| | testcases and test-types (Stress/Idle) | ++-----------------------------+--------------------------------------------+ + + +Installation Steps: +------------------- +To configure Yardstick, InfluxDB and Grafana for KVM4NFV project following sequence of steps are followed: + +**Note:** + +All the below steps are done as per the script, which is a part of CICD integration of kvmfornfv. + +.. code:: bash + + For Yardstick: + git clone https://gerrit.opnfv.org/gerrit/yardstick + + For InfluxDB: + docker pull tutum/influxdb + docker run -d --name influxdb -p 8083:8083 -p 8086:8086 --expose 8090 --expose 8099 tutum/influxdb + docker exec -it influxdb bash + $influx + >CREATE USER root WITH PASSWORD 'root' WITH ALL PRIVILEGES + >CREATE DATABASE yardstick; + >use yardstick; + >show MEASUREMENTS; + + For Grafana: + docker pull grafana/grafana + docker run -d --name grafana -p 3000:3000 grafana/grafana + +The Yardstick document for Grafana and InfluxDB configuration can be found `here`_. + +.. _here: https://wiki.opnfv.org/display/yardstick/How+to+deploy+InfluxDB+and+Grafana+locally + +Configuring the Dispatcher Type: +--------------------------------- +Need to configure the dispatcher type in /etc/yardstick/yardstick.conf depending on the dispatcher +methods which are used to store the cyclictest results. A sample yardstick.conf can be found at +/yardstick/etc/yardstick.conf.sample, which can be copied to /etc/yardstick. + +.. code:: bash + + mkdir -p /etc/yardstick/ + cp /yardstick/etc/yardstick.conf.sample /etc/yardstick/yardstick.conf + +**Dispatcher Modules:** + +Three type of dispatcher methods are available to store the cyclictest results. + +- File +- InfluxDB +- HTTP + +**1. File**: Default Dispatcher module is file. If the dispatcher module is configured as a file,then the test results are stored in a temporary file yardstick.out +( default path: /tmp/yardstick.out). +Dispatcher module of "Verify Job" is "Default". So,the results are stored in Yardstick.out file for verify job. +Storing all the verify jobs in InfluxDB database causes redundancy of latency values. Hence, a File output format is prefered. + +.. code:: bash + + [DEFAULT] + debug = False + dispatcher = file + + [dispatcher_file] + file_path = /tmp/yardstick.out + max_bytes = 0 + backup_count = 0 + +**2. Influxdb**: If the dispatcher module is configured as influxdb, then the test results are stored in Influxdb. +Users can check test resultsstored in the Influxdb(Database) on Grafana which is used to visualize the time series data. + +To configure the influxdb, the following content in /etc/yardstick/yardstick.conf need to updated + +.. code:: bash + + [DEFAULT] + debug = False + dispatcher = influxdb + + [dispatcher_influxdb] + timeout = 5 + target = http://127.0.0.1:8086 ##Mention the IP where influxdb is running + db_name = yardstick + username = root + password = root + +Dispatcher module of "Daily Job" is Influxdb. So, the results are stored in influxdb and then published to Dashboard. + +**3. HTTP**: If the dispatcher module is configured as http, users can check test result on OPNFV testing dashboard which uses MongoDB as backend. + +.. code:: bash + + [DEFAULT] + debug = False + dispatcher = http + + [dispatcher_http] + timeout = 5 + target = http://127.0.0.1:8000/results + +.. figure:: images/UseCaseDashboard.png + + +Detailing the dispatcher module in verify and daily Jobs: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +KVM4NFV updates the dispatcher module in the yardstick configuration file(/etc/yardstick/yardstick.conf) depending on the Job type(Verify/Daily). +Once the test is completed, results are published to the respective dispatcher modules. + +Dispatcher module is configured for each Job type as mentioned below. + +1. ``Verify Job`` : Default "DISPATCHER_TYPE" i.e. file(/tmp/yardstick.out) is used. User can also see the test results on Jenkins console log. + +.. code:: bash + + *"max": "00030", "avg": "00006", "min": "00006"* + +2. ``Daily Job`` : Opnfv Influxdb url is configured as dispatcher module. + +.. code:: bash + + DISPATCHER_TYPE=influxdb + DISPATCHER_INFLUXDB_TARGET="http://104.197.68.199:8086" + +Influxdb only supports line protocol, and the json protocol is deprecated. + +For example, the raw_result of cyclictest in json format is: + :: + + "benchmark": { + "timestamp": 1478234859.065317, + "errors": "", + "data": { + "max": "00012", + "avg": "00008", + "min": "00007" + }, + "sequence": 1 + }, + "runner_id": 23 + } + + +With the help of "influxdb_line_protocol", the json is transformed as a line string: + :: + + 'kvmfornfv_cyclictest_idle_idle,deploy_scenario=unknown,host=kvm.LF, + installer=unknown,pod_name=unknown,runner_id=23,scenarios=Cyclictest, + task_id=e7be7516-9eae-406e-84b6-e931866fa793,version=unknown + avg="00008",max="00012",min="00007" 1478234859065316864' + + + +Influxdb api which is already implemented in `Influxdb`_ will post the data in line format into the database. + +``Displaying Results on Grafana dashboard:`` + +- Once the test results are stored in Influxdb, dashboard configuration file(Json) which used to display the cyclictest results +on Grafana need to be created by following the `Grafana-procedure`_ and then pushed into `yardstick-repo`_ + +- Grafana can be accessed at `Login`_ using credentials opnfv/opnfv and used for visualizing the collected test data as shown in `Visual`_\ + + +.. figure:: images/Dashboard-screenshot-1.png + :name: dashboard-screenshot-1 + :width: 100% + :align: center + +.. figure:: images/Dashboard-screenshot-2.png + :name: dashboard-screenshot-2 + :width: 100% + :align: center + +.. _Influxdb: https://git.opnfv.org/cgit/yardstick/tree/yardstick/dispatcher/influxdb.py + +.. _Visual: http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest + +.. _Login: http://testresults.opnfv.org/grafana/login + +.. _Grafana-procedure: https://wiki.opnfv.org/display/yardstick/How+to+work+with+grafana+dashboard + +.. _yardstick-repo: https://git.opnfv.org/cgit/yardstick/tree/dashboard/KVMFORNFV-Cyclictest + +.. _GrafanaDoc: http://docs.grafana.org/ + +Understanding Kvm4nfv Grafana Dashboard +--------------------------------------- + +The Kvm4nfv dashboard found at http://testresults.opnfv.org/ currently supports graphical view of cyclictest. For viewing Kvm4nfv dashboarduse, + +.. code:: bash + + http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest + + The login details are: + + Username: opnfv + Password: opnfv + + +.. code:: bash + + The JSON of the kvmfonfv-cyclictest dashboard can be found at., + + $ git clone https://gerrit.opnfv.org/gerrit/yardstick.git + $ cd yardstick/dashboard + $ cat KVMFORNFV-Cyclictest + +The Dashboard has four tables, each representing a specific test-type of cyclictest case, + +- Kvmfornfv_Cyclictest_Idle-Idle +- Kvmfornfv_Cyclictest_CPUstress-Idle +- Kvmfornfv_Cyclictest_Memorystress-Idle +- Kvmfornfv_Cyclictest_IOstress-Idle + +Note: + +- For all graphs, X-axis is marked with time stamps, Y-axis with value in microsecond units. + +**A brief about what each graph of the dashboard represents:** + +1. Idle-Idle Graph +~~~~~~~~~~~~~~~~~~~~ +`Idle-Idle`_ graph displays the Average, Maximum and Minimum latency values obtained by running Idle_Idle test-type of the cyclictest. +Idle_Idle implies that no stress is applied on the Host or the Guest. + +.. _Idle-Idle: http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest?panelId=10&fullscreen + +.. figure:: images/Idle-Idle.png + :name: Idle-Idle graph + :width: 100% + :align: center + +2. CPU_Stress-Idle Graph +~~~~~~~~~~~~~~~~~~~~~~~~~ +`Cpu_Stress-Idle`_ graph displays the Average, Maximum and Minimum latency values obtained by running Cpu-stress_Idle test-type of the cyclictest. +Cpu-stress_Idle implies that CPU stress is applied on the Host and no stress on the Guest. + +.. _Cpu_stress-Idle: http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest?panelId=11&fullscreen + +.. figure:: images/Cpustress-Idle.png + :name: cpustress-idle graph + :width: 100% + :align: center + +3. Memory_Stress-Idle Graph +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +`Memory_Stress-Idle`_ graph displays the Average, Maximum and Minimum latency values obtained by running Memory-stress_Idle test-type of the Cyclictest. +Memory-stress_Idle implies that Memory stress is applied on the Host and no stress on the Guest. + +.. _Memory_Stress-Idle: http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest?panelId=12&fullscreen + +.. figure:: images/Memorystress-Idle.png + :name: memorystress-idle graph + :width: 100% + :align: center + +4. IO_Stress-Idle Graph +~~~~~~~~~~~~~~~~~~~~~~~~~ +`IO_Stress-Idle`_ graph displays the Average, Maximum and Minimum latency values obtained by running IO-stress_Idle test-type of the Cyclictest. +IO-stress_Idle implies that IO stress is applied on the Host and no stress on the Guest. + +.. _IO_Stress-Idle: http://testresults.opnfv.org/grafana/dashboard/db/kvmfornfv-cyclictest?panelId=13&fullscreen + +.. figure:: images/IOstress-Idle.png + :name: iostress-idle graph + :width: 100% + :align: center + +Future Scope +------------- +The future work will include adding the kvmfornfv_Packet-forwarding test results into Grafana and influxdb. diff --git a/docs/release/userguide/live_migration.userguide.rst b/docs/release/userguide/live_migration.userguide.rst new file mode 100644 index 000000000..9fa9b82fd --- /dev/null +++ b/docs/release/userguide/live_migration.userguide.rst @@ -0,0 +1,121 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +Fast Live Migration +=================== + +The NFV project requires fast live migration. The specific requirement is +total live migration time < 2Sec, while keeping the VM down time < 10ms when +running DPDK L2 forwarding workload. + +We measured the baseline data of migrating an idle 8GiB guest running a DPDK L2 +forwarding work load and observed that the total live migration time was 2271ms +while the VM downtime was 26ms. Both of these two indicators failed to satisfy +the requirements. + +Current Challenges +------------------ + +The following 4 features have been developed over the years to make the live +migration process faster. + ++ XBZRLE: + Helps to reduce the network traffic by just sending the + compressed data. ++ RDMA: + Uses a specific NIC to increase the efficiency of data + transmission. ++ Multi thread compression: + Compresses the data before transmission. ++ Auto convergence: + Reduces the data rate of dirty pages. + +Tests show none of the above features can satisfy the requirement of NFV. +XBZRLE and Multi thread compression do the compression entirely in software and +they are not fast enough in a 10Gbps network environment. RDMA is not flexible +because it has to transport all the guest memory to the destination without zero +page optimization. Auto convergence is not appropriate for NFV because it will +impact guest’s performance. + +So we need to find other ways for optimization. + +Optimizations +------------------------- +a. Delay non-emergency operations + By profiling, it was discovered that some of the cleanup operations during + the stop and copy stage are the main reason for the long VM down time. The + cleanup operation includes stopping the dirty page logging, which is a time + consuming operation. By deferring these operations until the data transmission + is completed the VM down time is reduced to about 5-7ms. +b. Optimize zero page checking + Currently QEMU uses the SSE2 instruction to optimize the zero pages + checking. The SSE2 instruction can process 16 bytes per instruction. + By using the AVX2 instruction, we can process 32 bytes per instruction. + Testing shows that using AVX2 can speed up the zero pages checking process + by about 25%. +c. Remove unnecessary context synchronization. + The CPU context was being synchronized twice during live migration. Removing + this unnecessary synchronization shortened the VM downtime by about 100us. + +Test Environment +---------------- + +The source and destination host have the same hardware and OS: +:: +Host: HSW-EP +CPU: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz +RAM: 64G +OS: RHEL 7.1 +Kernel: 4.2 +QEMU v2.4.0 + +Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit +X540-AT2 (rev 01) +QEMU parameters: +:: +${qemu} -smp ${guest_cpus} -monitor unix:${qmp_sock},server,nowait -daemonize \ +-cpu host,migratable=off,+invtsc,+tsc-deadline,pmu=off \ +-realtime mlock=on -mem-prealloc -enable-kvm -m 1G \ +-mem-path /mnt/hugetlbfs-1g \ +-drive file=/root/minimal-centos1.qcow2,cache=none,aio=threads \ +-netdev user,id=guest0,hostfwd=tcp:5555-:22 \ +-device virtio-net-pci,netdev=guest0 \ +-nographic -serial /dev/null -parallel /dev/null + +Network connection + +.. figure:: lmnetwork.jpg + :align: center + :alt: live migration network connection + :figwidth: 80% + + +Test Result +----------- +The down time is set to 10ms when doing the test. We use pktgen to send the +packages to guest, the package size is 64 bytes, and the line rate is 2013 +Mbps. + +a. Total live migration time + + The total live migration time before and after optimization is shown in the + chart below. For an idle guest, we can reduce the total live migration time + from 2070ms to 401ms. For a guest running the DPDK L2 forwarding workload, + the total live migration time is reduced from 2271ms to 654ms. + +.. figure:: lmtotaltime.jpg + :align: center + :alt: total live migration time + +b. VM downtime + + The VM down time before and after optimization is shown in the chart below. + For an idle guest, we can reduce the VM down time from 29ms to 9ms. For a guest + running the DPDK L2 forwarding workload, the VM down time is reduced from 26ms to + 5ms. + +.. figure:: lmdowntime.jpg + :align: center + :alt: vm downtime + :figwidth: 80% diff --git a/docs/release/userguide/lmdowntime.jpg b/docs/release/userguide/lmdowntime.jpg new file mode 100644 index 000000000..c9faa4c73 Binary files /dev/null and b/docs/release/userguide/lmdowntime.jpg differ diff --git a/docs/release/userguide/lmnetwork.jpg b/docs/release/userguide/lmnetwork.jpg new file mode 100644 index 000000000..8a9a324c3 Binary files /dev/null and b/docs/release/userguide/lmnetwork.jpg differ diff --git a/docs/release/userguide/lmtotaltime.jpg b/docs/release/userguide/lmtotaltime.jpg new file mode 100644 index 000000000..2dced3987 Binary files /dev/null and b/docs/release/userguide/lmtotaltime.jpg differ diff --git a/docs/release/userguide/low_latency.userguide.rst b/docs/release/userguide/low_latency.userguide.rst new file mode 100644 index 000000000..f027b4939 --- /dev/null +++ b/docs/release/userguide/low_latency.userguide.rst @@ -0,0 +1,264 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +Low Latency Environment +======================= + +Achieving low latency with the KVM4NFV project requires setting up a special +test environment. This environment includes the BIOS settings, kernel +configuration, kernel parameters and the run-time environment. + +Hardware Environment Description +-------------------------------- + +BIOS setup plays an important role in achieving real-time latency. A collection +of relevant settings, used on the platform where the baseline performance data +was collected, is detailed below: + +CPU Features +~~~~~~~~~~~~ + +Some special CPU features like TSC-deadline timer, invariant TSC and Process +posted interrupts, etc, are helpful for latency reduction. + +CPU Topology +~~~~~~~~~~~~ + +NUMA topology is also important for latency reduction. + +BIOS Setup +~~~~~~~~~~ + +Careful BIOS setup is important in achieving real time latency. Different +platforms have different BIOS setups, below are the important BIOS settings on +the platform used to collect the baseline performance data. + +Software Environment Setup +-------------------------- +Both the host and the guest environment need to be configured properly to +reduce latency variations. Below are some suggested kernel configurations. +The ci/envs/ directory gives detailed implementation on how to setup the +environment. + +Kernel Parameter +~~~~~~~~~~~~~~~~ + +Please check the default kernel configuration in the source code at: +kernel/arch/x86/configs/opnfv.config. + +Below is host kernel boot line example: + +.. code:: bash + + isolcpus=11-15,31-35 nohz_full=11-15,31-35 rcu_nocbs=11-15,31-35 + iommu=pt intel_iommu=on default_hugepagesz=1G hugepagesz=1G mce=off idle=poll + intel_pstate=disable processor.max_cstate=1 pcie_asmp=off tsc=reliable + +Below is guest kernel boot line example + +.. code:: bash + + isolcpus=1 nohz_full=1 rcu_nocbs=1 mce=off idle=poll default_hugepagesz=1G + hugepagesz=1G + +Please refer to `tuning.userguide` for more explanation. + +Run-time Environment Setup +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Not only are special kernel parameters needed but a special run-time +environment is also required. Please refer to `tunning.userguide` for +more explanation. + +Test cases to measure Latency +----------------------------- +The performance of the kvm4nfv is assesed by the latency values. Cyclictest and Packet forwarding +Test cases result in real time latency values of average, minimum and maximum. + +* Cyclictest + +* Packet Forwarding test + +1. Cyclictest case +------------------- +Cyclictest results are the most frequently cited real-time Linux metric. The core concept of Cyclictest is very simple. +In KVM4NFV cyclictest is implemented on the Guest-VM with 4.4-Kernel RPM installed. It generated Max,Min and Avg +values which help in assesing the kernel used. Cyclictest in currently divided into the following test types, + +* Idle-Idle +* CPU_stress-Idle +* Memory_stress-Idle +* IO_stress-Idle + +Future scope of work may include the below test-types, + +* CPU_stress-CPU_stress +* Memory_stress-Memory_stress +* IO_stress-IO_stress + +Understanding the naming convention +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code:: bash + + [Host-Type ] - [Guest-Type] + +* **Host-Type :** Mentions the type of stress applied on the kernel of the Host +* **Guest-Type :** Mentions the type of stress applied on the kernel of the Guest + +Example., + +.. code:: bash + + Idle - CPU_stress + +The above name signifies that, + +- No Stress is applied on the Host kernel + +- CPU Stress is applied on the Guest kernel + +**Note:** + +- Stress is applied using the stress which is installed as part of the deployment. + Stress can be applied on CPU, Memory and Input-Output (Read/Write) operations using the stress tool. + +Version Features +~~~~~~~~~~~~~~~~ + ++-----------------------+------------------+-----------------+ +| **Test Name** | **Colorado** | **Danube** | +| | | | ++-----------------------+------------------+-----------------+ +| - Idle - Idle | ``Y`` | ``Y`` | ++-----------------------+------------------+-----------------+ +| - Cpustress - Idle | | ``Y`` | ++-----------------------+------------------+-----------------+ +| - Memorystress - Idle | | ``Y`` | ++-----------------------+------------------+-----------------+ +| - IOstress - Idle | | ``Y`` | ++-----------------------+------------------+-----------------+ + + +Idle-Idle test-type +~~~~~~~~~~~~~~~~~~~ +Cyclictest in run on the Guest VM when Host,Guest are not under any kind of stress. This is the basic +cyclictest of the KVM4NFV project. Outputs Avg, Min and Max latency values. + +.. figure:: images/idle-idle-test-type.png + :name: idle-idle test type + :width: 100% + :align: center + +CPU_Stress-Idle test-type +~~~~~~~~~~~~~~~~~~~~~~~~~ +Here, the host is under CPU stress, where multiple times sqrt() function is called on kernel which +results increased CPU load. The cyclictest will run on the guest, where the guest is under no stress. +Outputs Avg, Min and Max latency values. + +.. figure:: images/cpu-stress-idle-test-type.png + :name: cpu-stress-idle test type + :width: 100% + :align: center + +Memory_Stress-Idle test-type +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +In this type, the host is under memory stress where continuos memory operations are implemented to +increase the Memory stress (Buffer stress).The cyclictest will run on the guest, where the guest is under +no stress. It outputs Avg, Min and Max latency values. + +.. figure:: images/memory-stress-idle-test-type.png + :name: memory-stress-idle test type + :width: 100% + :align: center + +IO_Stress-Idle test-type +~~~~~~~~~~~~~~~~~~~~~~~~ +The host is under constant Input/Output stress .i.e., multiple read-write operations are invoked to +increase stress. Cyclictest will run on the guest VM that is launched on the same host, where the guest +is under no stress. It outputs Avg, Min and Max latency values. + +.. figure:: images/io-stress-idle-test-type.png + :name: io-stress-idle test type + :width: 100% + :align: center + +CPU_Stress-CPU_Stress test-type +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Not implemented for Danube release. + +Memory_Stress-Memory_Stress test-type +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Not implemented for Danube release. + +IO_Stress-IO_Stress test type +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Not implemented for Danube release. + +2. Packet Forwarding Test cases +------------------------------- +Packet forwarding is an other test case of Kvm4nfv. It measures the time taken by a packet to return +to source after reaching its destination. This test case uses automated test-framework provided by +OPNFV VSWITCHPERF project and a traffic generator (IXIA is used for kvm4nfv). Only latency results +generating test cases are triggered as a part of kvm4nfv daily job. + +Latency test measures the time required for a frame to travel from the originating device through the +network to the destination device. Please note that RFC2544 Latency measurement will be superseded with +a measurement of average latency over all successfully transferred packets or frames. + +Packet forwarding test cases currently supports the following test types: + +* Packet forwarding to Host + +* Packet forwarding to Guest + +* Packet forwarding to Guest using SRIOV + +The testing approach adoped is black box testing, meaning the test inputs can be generated and the +outputs captured and completely evaluated from the outside of the System Under Test(SUT). + +Packet forwarding to Host +~~~~~~~~~~~~~~~~~~~~~~~~~ +This is also known as Physical port → vSwitch → physical port deployment. +This test measures the time taken by the packet/frame generated by traffic generator(phy) to travel +through the network to the destination device(phy). This test results min,avg and max latency values. +This value signifies the performance of the installed kernel. + +Packet flow, + +.. figure:: images/host_pk_fw.png + :name: packet forwarding to host + :width: 100% + :align: center + +Packet forwarding to Guest +~~~~~~~~~~~~~~~~~~~~~~~~~~ +This is also known as Physical port → vSwitch → VNF → vSwitch → physical port deployment. + +This test measures the time taken by the packet/frame generated by traffic generator(phy) to travel +through the network involving a guest to the destination device(phy). This test results min,avg and +max latency values. This value signifies the performance of the installed kernel. + +Packet flow, + +.. figure:: images/guest_pk_fw.png + :name: packet forwarding to guest + :width: 100% + :align: center + +Packet forwarding to Guest using SRIOV +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +This test is used to verify the VNF and measure the base performance (maximum forwarding rate in +fps and latency) that can be achieved by the VNF without a vSwitch. The performance metrics +collected by this test will serve as a key comparison point for NIC passthrough technologies and +vSwitches. VNF in this context refers to the hypervisor and the VM. + +**Note:** The Vsperf running on the host is still required. + +Packet flow, + +.. figure:: images/sriov_pk_fw.png + :name: packet forwarding to guest using sriov + :width: 100% + :align: center diff --git a/docs/release/userguide/openstack.rst b/docs/release/userguide/openstack.rst new file mode 100644 index 000000000..929d2ba42 --- /dev/null +++ b/docs/release/userguide/openstack.rst @@ -0,0 +1,51 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +============================ +Danube OpenStack User Guide +============================ + +OpenStack is a cloud operating system developed and released by the +`OpenStack project `_. OpenStack is used in OPNFV +for controlling pools of compute, storage, and networking resources in a Pharos +compliant infrastructure. + +OpenStack is used in Danube to manage tenants (known in OpenStack as +projects),users, services, images, flavours, and quotas across the Pharos +infrastructure.The OpenStack interface provides the primary interface for an +operational Danube deployment and it is from the "horizon console" that an +OPNFV user will perform the majority of administrative and operational +activities on the deployment. + +OpenStack references +-------------------- + +The `OpenStack user guide `_ provides +details and descriptions of how to configure and interact with the OpenStack +deployment.This guide can be used by lab engineers and operators to tune the +OpenStack deployment to your liking. + +Once you have configured OpenStack to your purposes, or the Danube +deployment meets your needs as deployed, an operator, or administrator, will +find the best guidance for working with OpenStack in the +`OpenStack administration guide `_. + +Connecting to the OpenStack instance +------------------------------------ + +Once familiar with the basic of working with OpenStack you will want to connect +to the OpenStack instance via the Horizon Console. The Horizon console provide +a Web based GUI that will allow you operate the deployment. +To do this you should open a browser on the JumpHost to the following address +and enter the username and password: + + + http://{Controller-VIP}:80/index.html> + username: admin + password: admin + +Other methods of interacting with and configuring OpenStack,, like the REST API +and CLI are also available in the Danube deployment, see the +`OpenStack administration guide `_ +for more information on using those interfaces. diff --git a/docs/release/userguide/packet_forwarding.userguide.rst b/docs/release/userguide/packet_forwarding.userguide.rst new file mode 100644 index 000000000..31341a908 --- /dev/null +++ b/docs/release/userguide/packet_forwarding.userguide.rst @@ -0,0 +1,633 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +================= +Packet Forwarding +================= + +About Packet Forwarding +----------------------- + +Packet Forwarding is a test suite of KVM4NFV. These latency tests measures the time taken by a +**Packet** generated by the traffic generator to travel from the originating device through the +network to the destination device. Packet Forwarding is implemented using test framework +implemented by OPNFV VSWITCHPERF project and an ``IXIA Traffic Generator``. + +Version Features +---------------- + ++-----------------------------+---------------------------------------------------+ +| | | +| **Release** | **Features** | +| | | ++=============================+===================================================+ +| | - Packet Forwarding is not part of Colorado | +| Colorado | release of KVM4NFV | +| | | ++-----------------------------+---------------------------------------------------+ +| | - Packet Forwarding is a testcase in KVM4NFV | +| | - Implements three scenarios (Host/Guest/SRIOV) | +| | as part of testing in KVM4NFV | +| Danube | - Uses automated test framework of OPNFV | +| | VSWITCHPERF software (PVP/PVVP) | +| | - Works with IXIA Traffic Generator | ++-----------------------------+---------------------------------------------------+ + +VSPERF +------ + +VSPerf is an OPNFV testing project. +VSPerf will develop a generic and architecture agnostic vSwitch testing framework and associated +tests, that will serve as a basis for validating the suitability of different vSwitch +implementations in a Telco NFV deployment environment. The output of this project will be utilized +by the OPNFV Performance and Test group and its associated projects, as part of OPNFV Platform and +VNF level testing and validation. + +For complete VSPERF documentation go to `link.`_ + +.. _link.: http://artifacts.opnfv.org/vswitchperf/danube/index.html + + +Installation +~~~~~~~~~~~~ + +Guidelines of installating `VSPERF`_. + +.. _VSPERF: http://artifacts.opnfv.org/vswitchperf/colorado/configguide/index.html + +Supported Operating Systems +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +* CentOS 7 +* Fedora 20 +* Fedora 21 +* Fedora 22 +* RedHat 7.2 +* Ubuntu 14.04 + +Supported vSwitches +~~~~~~~~~~~~~~~~~~~ + +The vSwitch must support Open Flow 1.3 or greater. + +* OVS (built from source). +* OVS with DPDK (built from source). + +Supported Hypervisors +~~~~~~~~~~~~~~~~~~~~~ + +* Qemu version 2.6. + +Other Requirements +~~~~~~~~~~~~~~~~~~ + +The test suite requires Python 3.3 and relies on a number of other +packages. These need to be installed for the test suite to function. + +Installation of required packages, preparation of Python 3 virtual +environment and compilation of OVS, DPDK and QEMU is performed by +script **systems/build_base_machine.sh**. It should be executed under +user account, which will be used for vsperf execution. + + **Please Note:** Password-less sudo access must be configured for given user before script is executed. + +Execution of installation script: + +.. code:: bash + + $ cd vswitchperf + $ cd systems + $ ./build_base_machine.sh + +Script **build_base_machine.sh** will install all the vsperf dependencies +in terms of system packages, Python 3.x and required Python modules. +In case of CentOS 7 it will install Python 3.3 from an additional repository +provided by Software Collections (`a link`_). In case of RedHat 7 it will +install Python 3.4 as an alternate installation in /usr/local/bin. Installation +script will also use `virtualenv`_ to create a vsperf virtual environment, +which is isolated from the default Python environment. This environment will +reside in a directory called **vsperfenv** in $HOME. + +You will need to activate the virtual environment every time you start a +new shell session. Its activation is specific to your OS: + +For running testcases VSPERF is installed on Intel pod1-node2 in which centos +operating system is installed. Only VSPERF installion on Centos is discussed here. +For installation steps on other operating systems please refer to `here`_. + +.. _here: http://artifacts.opnfv.org/vswitchperf/colorado/configguide/index.html + +For CentOS 7 +~~~~~~~~~~~~~~ + +## Python 3 Packages + +To avoid file permission errors and Python version issues, use virtualenv to create an isolated environment with Python3. +The required Python 3 packages can be found in the `requirements.txt` file in the root of the test suite. +They can be installed in your virtual environment like so: + +.. code:: bash + + scl enable python33 bash + # Create virtual environment + virtualenv vsperfenv + cd vsperfenv + source bin/activate + pip install -r requirements.txt + + +You need to activate the virtual environment every time you start a new shell session. +To activate, simple run: + +.. code:: bash + + scl enable python33 bash + cd vsperfenv + source bin/activate + + +Working Behind a Proxy +~~~~~~~~~~~~~~~~~~~~~~ + +If you're behind a proxy, you'll likely want to configure this before running any of the above. For example: + +.. code:: bash + + export http_proxy="http://:@:/"; + export https_proxy="https://:@:/"; + export ftp_proxy="ftp://:@:/"; + export socks_proxy="socks://:@:/"; + +.. _a link: http://www.softwarecollections.org/en/scls/rhscl/python33/ +.. _virtualenv: https://virtualenv.readthedocs.org/en/latest/ + +For other OS specific activation click `this link`_: + +.. _this link: http://artifacts.opnfv.org/vswitchperf/colorado/configguide/installation.html#other-requirements + +Traffic-Generators +------------------ + +VSPERF supports many Traffic-generators. For configuring VSPERF to work with the available traffic-generator go through `this`_. + +.. _this: http://artifacts.opnfv.org/vswitchperf/colorado/configguide/trafficgen.html + +VSPERF supports the following traffic generators: + + * Dummy (DEFAULT): Allows you to use your own external + traffic generator. + * IXIA (IxNet and IxOS) + * Spirent TestCenter + * Xena Networks + * MoonGen + +To see the list of traffic gens from the cli: + +.. code-block:: console + + $ ./vsperf --list-trafficgens + +This guide provides the details of how to install +and configure the various traffic generators. + +As KVM4NFV uses only IXIA traffic generator, it is discussed here. For complete documentation regarding traffic generators please follow this `link`_. + +.. _link: https://gerrit.opnfv.org/gerrit/gitweb?p=vswitchperf.git;a=blob;f=docs/configguide/trafficgen.rst;h=85fc35b886d30db3b92a6b7dcce7ca742b70cbdc;hb=HEAD + +IXIA Setup +---------- + +Hardware Requirements +~~~~~~~~~~~~~~~~~~~~~ + +VSPERF requires the following hardware to run tests: IXIA traffic generator (IxNetwork), a machine that +runs the IXIA client software and a CentOS Linux release 7.1.1503 (Core) host. + +Installation +~~~~~~~~~~~~ + +Follow the installation instructions to install. + +On the CentOS 7 system +~~~~~~~~~~~~~~~~~~~~~~ + +You need to install IxNetworkTclClient$(VER_NUM)Linux.bin.tgz. + +On the IXIA client software system +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Find the IxNetwork TCL server app (start -> All Programs -> IXIA -> IxNetwork -> IxNetwork_$(VER_NUM) -> IxNetwork TCL Server) + - Right click on IxNetwork TCL Server, select properties + - Under shortcut tab in the Target dialogue box make sure there is the argument "-tclport xxxx" + +where xxxx is your port number (take note of this port number you will need it for the 10_custom.conf file). + +.. figure:: images/IXIA1.png + :name: IXIA1 setup + :width: 100% + :align: center + +- Hit Ok and start the TCL server application + +VSPERF configuration +-------------------- + +There are several configuration options specific to the IxNetworks traffic generator +from IXIA. It is essential to set them correctly, before the VSPERF is executed +for the first time. + +Detailed description of options follows: + + * TRAFFICGEN_IXNET_MACHINE - IP address of server, where IxNetwork TCL Server is running + * TRAFFICGEN_IXNET_PORT - PORT, where IxNetwork TCL Server is accepting connections from + TCL clients + * TRAFFICGEN_IXNET_USER - username, which will be used during communication with IxNetwork + TCL Server and IXIA chassis + * TRAFFICGEN_IXIA_HOST - IP address of IXIA traffic generator chassis + * TRAFFICGEN_IXIA_CARD - identification of card with dedicated ports at IXIA chassis + * TRAFFICGEN_IXIA_PORT1 - identification of the first dedicated port at TRAFFICGEN_IXIA_CARD + at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of + unidirectional traffic, it is essential to correctly connect 1st IXIA port to the 1st NIC + at DUT, i.e. to the first PCI handle from WHITELIST_NICS list. Otherwise traffic may not + be able to pass through the vSwitch. + * TRAFFICGEN_IXIA_PORT2 - identification of the second dedicated port at TRAFFICGEN_IXIA_CARD + at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of + unidirectional traffic, it is essential to correctly connect 2nd IXIA port to the 2nd NIC + at DUT, i.e. to the second PCI handle from WHITELIST_NICS list. Otherwise traffic may not + be able to pass through the vSwitch. + * TRAFFICGEN_IXNET_LIB_PATH - path to the DUT specific installation of IxNetwork TCL API + * TRAFFICGEN_IXNET_TCL_SCRIPT - name of the TCL script, which VSPERF will use for + communication with IXIA TCL server + * TRAFFICGEN_IXNET_TESTER_RESULT_DIR - folder accessible from IxNetwork TCL server, + where test results are stored, e.g. ``c:/ixia_results``; see test-results-share_ + * TRAFFICGEN_IXNET_DUT_RESULT_DIR - directory accessible from the DUT, where test + results from IxNetwork TCL server are stored, e.g. ``/mnt/ixia_results``; see + test-results-share_ + +.. _test-results-share: + +Test results share +~~~~~~~~~~~~~~~~~~ + +VSPERF is not able to retrieve test results via TCL API directly. Instead, all test +results are stored at IxNetwork TCL server. Results are stored at folder defined by +``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` configuration parameter. Content of this +folder must be shared (e.g. via samba protocol) between TCL Server and DUT, where +VSPERF is executed. VSPERF expects, that test results will be available at directory +configured by ``TRAFFICGEN_IXNET_DUT_RESULT_DIR`` configuration parameter. + +Example of sharing configuration: + + * Create a new folder at IxNetwork TCL server machine, e.g. ``c:\ixia_results`` + * Modify sharing options of ``ixia_results`` folder to share it with everybody + * Create a new directory at DUT, where shared directory with results + will be mounted, e.g. ``/mnt/ixia_results`` + * Update your custom VSPERF configuration file as follows: + + .. code-block:: python + + TRAFFICGEN_IXNET_TESTER_RESULT_DIR = 'c:/ixia_results' + TRAFFICGEN_IXNET_DUT_RESULT_DIR = '/mnt/ixia_results' + + Note: It is essential to use slashes '/' also in path + configured by ``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` parameter. + +* Install cifs-utils package. + + e.g. at rpm based Linux distribution: + +.. code-block:: console + + yum install cifs-utils + +* Mount shared directory, so VSPERF can access test results. + + e.g. by adding new record into ``/etc/fstab`` + +.. code-block:: console + + mount -t cifs //_TCL_SERVER_IP_OR_FQDN_/ixia_results /mnt/ixia_results + -o file_mode=0777,dir_mode=0777,nounix + +It is recommended to verify, that any new file inserted into ``c:/ixia_results`` folder +is visible at DUT inside ``/mnt/ixia_results`` directory. + + +Cloning and building src dependencies +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to run VSPERF, you will need to download DPDK and OVS. You can do this manually and build +them in a preferred location, or you could use vswitchperf/src. The vswitchperf/src directory +contains makefiles that will allow you to clone and build the libraries that VSPERF depends on, +such as DPDK and OVS. To clone and build simply: + +.. code:: bash + + cd src + make + +To delete a src subdirectory and its contents to allow you to re-clone simply use: + +.. code:: bash + + make cleanse + +Configure the `./conf/10_custom.conf` file +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The supplied `10_custom.conf` file must be modified, as it contains configuration items for which there are no reasonable default values. + +The configuration items that can be added is not limited to the initial contents. Any configuration item +mentioned in any .conf file in `./conf` directory can be added and that item will be overridden by the custom +configuration value. + +Using a custom settings file +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Alternatively a custom settings file can be passed to `vsperf` via the `--conf-file` argument. + +.. code:: bash + + ./vsperf --conf-file ... + +Note that configuration passed in via the environment (`--load-env`) or via another command line +argument will override both the default and your custom configuration files. This +"priority hierarchy" can be described like so (1 = max priority): + +1. Command line arguments +2. Environment variables +3. Configuration file(s) + +vloop_vnf +~~~~~~~~~ + +VSPERF uses a VM image called vloop_vnf for looping traffic in the deployment +scenarios involving VMs. The image can be downloaded from +``__. + +Please see the installation instructions for information on :ref:`vloop-vnf` +images. + +.. _l2fwd-module: + +l2fwd Kernel Module +~~~~~~~~~~~~~~~~~~~ + +A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with +support for Destination Network Address Translation (DNAT) for both the MAC and +IP addresses. l2fwd can be found in /src/l2fwd + +Executing tests +~~~~~~~~~~~~~~~~ + +Before running any tests make sure you have root permissions by adding the following line to /etc/sudoers: +.. code:: bash + + username ALL=(ALL) NOPASSWD: ALL + +username in the example above should be replaced with a real username. + +To list the available tests: + +.. code:: bash + + ./vsperf --list-tests + + +To run a group of tests, for example all tests with a name containing +'RFC2544': + +.. code:: bash + + ./vsperf --conf-file=user_settings.py --tests="RFC2544" + +To run all tests: + +.. code:: bash + + ./vsperf --conf-file=user_settings.py + +Some tests allow for configurable parameters, including test duration (in seconds) as well as packet sizes (in bytes). + +.. code:: bash + + ./vsperf --conf-file user_settings.py + --tests RFC2544Tput + --test-param` "rfc2544_duration=10;packet_sizes=128" + +For all available options, check out the help dialog: + +.. code:: bash + + ./vsperf --help + + +Testcases +---------- + +Available Tests in VSPERF are: + + * phy2phy_tput + * phy2phy_forwarding + * back2back + * phy2phy_tput_mod_vlan + * phy2phy_cont + * pvp_cont + * pvvp_cont + * pvpv_cont + * phy2phy_scalability + * pvp_tput + * pvp_back2back + * pvvp_tput + * pvvp_back2back + * phy2phy_cpu_load + * phy2phy_mem_load + +VSPERF modes of operation +-------------------------- + +VSPERF can be run in different modes. By default it will configure vSwitch, +traffic generator and VNF. However it can be used just for configuration +and execution of traffic generator. Another option is execution of all +components except traffic generator itself. + +Mode of operation is driven by configuration parameter -m or --mode + +.. code-block:: console + + -m MODE, --mode MODE vsperf mode of operation; + Values: + "normal" - execute vSwitch, VNF and traffic generator + "trafficgen" - execute only traffic generator + "trafficgen-off" - execute vSwitch and VNF + "trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission + +In case, that VSPERF is executed in "trafficgen" mode, then configuration +of traffic generator can be modified through ``TRAFFIC`` dictionary passed to the +``--test-params`` option. It is not needed to specify all values of ``TRAFFIC`` +dictionary. It is sufficient to specify only values, which should be changed. +Detailed description of ``TRAFFIC`` dictionary can be found at: ref:`configuration-of-traffic-dictionary`. + +Example of execution of VSPERF in "trafficgen" mode: + +.. code-block:: console + + $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \ + --test-params "TRAFFIC={'traffic_type':'rfc2544_continuous','bidir':'False','framerate':60}" + + +Packet Forwarding Test Scenarios +-------------------------------- + +KVM4NFV currently implements three scenarios as part of testing: + + * Host Scenario + * Guest Scenario. + * SR-IOV Scenario. + + +Packet Forwarding Host Scenario +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Here host DUT has VSPERF installed in it and is properly configured to use IXIA Traffic-generator +by providing IXIA CARD, PORTS and Lib paths along with IP. +please refer to figure.2 + +.. figure:: images/Host_Scenario.png + :name: Host_Scenario + :width: 100% + :align: center + +Packet Forwarding Guest Scenario +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Here the guest is a Virtual Machine (VM) launched by using vloop_vnf provided by vsperf project +on host/DUT using Qemu. In this latency test the time taken by the frame/packet to travel from the +originating device through network involving a guest to destination device is calculated. +The resulting latency values will define the performance of installed kernel. + +.. figure:: images/Guest_Scenario.png + :name: Guest_Scenario + :width: 100% + :align: center + +Packet Forwarding SRIOV Scenario +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In this test the packet generated at the IXIA is forwarded to the Guest VM launched on Host by +implementing SR-IOV interface at NIC level of host .i.e., DUT. The time taken by the packet to +travel through the network to the destination the IXIA traffic-generator is calculated and +published as a test result for this scenario. + +SRIOV-support_ is given below, it details how to use SR-IOV. + +.. figure:: images/SRIOV_Scenario.png + :name: SRIOV_Scenario + :width: 100% + :align: center + +Using vfio_pci with DPDK +~~~~~~~~~~~~~~~~~~~~~~~~~ + +To use vfio with DPDK instead of igb_uio add into your custom configuration +file the following parameter: + +.. code-block:: python + + PATHS['dpdk']['src']['modules'] = ['uio', 'vfio-pci'] + + +**NOTE:** In case, that DPDK is installed from binary package, then please + + set ``PATHS['dpdk']['bin']['modules']`` instead. + +**NOTE:** Please ensure that Intel VT-d is enabled in BIOS. + +**NOTE:** Please ensure your boot/grub parameters include +the following: + +.. code-block:: console + + iommu=pt intel_iommu=on + +To check that IOMMU is enabled on your platform: + +.. code-block:: console + + $ dmesg | grep IOMMU + [ 0.000000] Intel-IOMMU: enabled + [ 0.139882] dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de + [ 0.139888] dmar: IOMMU 1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0466 ecap f020de + [ 0.139893] IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0 + [ 0.139894] IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1 + [ 0.139895] IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1 + [ 3.335744] IOMMU: dmar0 using Queued invalidation + [ 3.335746] IOMMU: dmar1 using Queued invalidation + .... + +.. _SRIOV-support: + +Using SRIOV support +~~~~~~~~~~~~~~~~~~~ + +To use virtual functions of NIC with SRIOV support, use extended form +of NIC PCI slot definition: + +.. code-block:: python + + WHITELIST_NICS = ['0000:03:00.0|vf0', '0000:03:00.1|vf3'] + +Where ``vf`` is an indication of virtual function usage and following +number defines a VF to be used. In case that VF usage is detected, +then vswitchperf will enable SRIOV support for given card and it will +detect PCI slot numbers of selected VFs. + +So in example above, one VF will be configured for NIC '0000:05:00.0' +and four VFs will be configured for NIC '0000:05:00.1'. Vswitchperf +will detect PCI addresses of selected VFs and it will use them during +test execution. + +At the end of vswitchperf execution, SRIOV support will be disabled. + +SRIOV support is generic and it can be used in different testing scenarios. +For example: + + +* vSwitch tests with DPDK or without DPDK support to verify impact + of VF usage on vSwitch performance +* tests without vSwitch, where traffic is forwared directly + between VF interfaces by packet forwarder (e.g. testpmd application) +* tests without vSwitch, where VM accesses VF interfaces directly + by PCI-passthrough to measure raw VM throughput performance. + +Using QEMU with PCI passthrough support +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Raw virtual machine throughput performance can be measured by execution of PVP +test with direct access to NICs by PCI passthrough. To execute VM with direct +access to PCI devices, enable vfio-pci. In order to use virtual functions, +SRIOV-support_ must be enabled. + +Execution of test with PCI passthrough with vswitch disabled: + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf \ + --vswitch none --vnf QemuPciPassthrough pvp_tput + +Any of supported guest-loopback-application can be used inside VM with +PCI passthrough support. + +Note: Qemu with PCI passthrough support can be used only with PVP test +deployment. + +Results +~~~~~~~ + +The results for the packet forwarding test cases are uploaded to artifacts. +The link for the same can be found below + +.. code:: bash + + http://artifacts.opnfv.org/kvmfornfv.html diff --git a/docs/release/userguide/pcm_utility.userguide.rst b/docs/release/userguide/pcm_utility.userguide.rst new file mode 100644 index 000000000..6695d50c0 --- /dev/null +++ b/docs/release/userguide/pcm_utility.userguide.rst @@ -0,0 +1,141 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +====================== +PCM Utility in KVM4NFV +====================== + +Collecting Memory Bandwidth Information using PCM utility +--------------------------------------------------------- +This chapter includes how the PCM utility is used in kvm4nfv +to collect memory bandwidth information + +About PCM utility +----------------- +The Intel® Performance Counter Monitor provides sample C++ routines and utilities to estimate the +internal resource utilization of the latest Intel® Xeon® and Core™ processors and gain a significant +performance boost.In Intel PCM toolset,there is a pcm-memory.x tool which is used for observing the +memory traffic intensity + +Version Features +----------------- + ++-----------------------------+-----------------------------------------------+ +| | | +| **Release** | **Features** | +| | | ++=============================+===============================================+ +| | - In Colorado release,we don't have memory | +| Colorado | bandwidth information collected through the | +| | cyclic testcases. | +| | | ++-----------------------------+-----------------------------------------------+ +| | - pcm-memory.x will be executed before the | +| Danube | execution of every testcase | +| | - pcm-memory.x provides the memory bandwidth | +| | data throughout out the testcases | +| | - used for all test-types (stress/idle) | +| | - Generated memory bandwidth logs are | +| | published to the KVMFORFNV artifacts | ++-----------------------------+-----------------------------------------------+ + +Implementation of pcm-memory.x: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The tool measures the memory bandwidth observed for every channel reporting seperate throughput +for reads from memory and writes to the memory. pcm-memory.x tool tends to report values slightly +higher than the application's own measurement. + +Command: + +.. code:: bash + + sudo ./pcm-memory.x [Delay]/[external_program] + +Parameters + +- pcm-memory can called with either delay or external_program/application as a parameter + +- If delay is given as 5,then the output will be produced with refresh of every 5 seconds. + +- If external_program is script/application,then the output will produced after the execution of the application or the script passed as a parameter. + +**Sample Output:** + + The output produced with default refresh of 1 second. + ++---------------------------------------+---------------------------------------+ +| Socket 0 | Socket 1 | ++=======================================+=======================================+ +| Memory Performance Monitoring | Memory Performance Monitoring | +| | | ++---------------------------------------+---------------------------------------+ +| Mem Ch 0: Reads (MB/s): 6870.81 | Mem Ch 0: Reads (MB/s): 7406.36 | +| Writes(MB/s): 1805.03 | Writes(MB/s): 1951.25 | +| Mem Ch 1: Reads (MB/s): 6873.91 | Mem Ch 1: Reads (MB/s): 7411.11 | +| Writes(MB/s): 1810.86 | Writes(MB/s): 1957.73 | +| Mem Ch 2: Reads (MB/s): 6866.77 | Mem Ch 2: Reads (MB/s): 7403.39 | +| Writes(MB/s): 1804.38 | Writes(MB/s): 1951.42 | +| Mem Ch 3: Reads (MB/s): 6867.47 | Mem Ch 3: Reads (MB/s): 7403.66 | +| Writes(MB/s): 1805.53 | Writes(MB/s): 1950.95 | +| | | +| NODE0 Mem Read (MB/s) : 27478.96 | NODE1 Mem Read (MB/s) : 29624.51 | +| NODE0 Mem Write (MB/s): 7225.79 | NODE1 Mem Write (MB/s): 7811.36 | +| NODE0 P. Write (T/s) : 214810 | NODE1 P. Write (T/s) : 238294 | +| NODE0 Memory (MB/s) : 34704.75 | NODE1 Memory (MB/s) : 37435.87 | ++---------------------------------------+---------------------------------------+ +| - System Read Throughput(MB/s): 57103.47 | +| - System Write Throughput(MB/s): 15037.15 | +| - System Memory Throughput(MB/s): 72140.62 | ++-------------------------------------------------------------------------------+ + +pcm-memory.x in KVM4NFV: +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +pcm-memory is a part of KVM4NFV in D release.pcm-memory.x will be executed with delay of 60 seconds +before starting every testcase to monitor the memory traffic intensity which was handled in +collect_MBWInfo function .The memory bandwidth information will be collected into the logs through +the testcase updating every 60 seconds. + + **Pre-requisites:** + + 1.Check for the processors supported by PCM .Latest pcm utility version (2.11)support Intel® Xeon® E5 v4 processor family. + + 2.Disabling NMI Watch Dog + + 3.Installing MSR registers + + +Memory Bandwidth logs for KVM4NFV can be found `here`_: + +.. code:: bash + + http://artifacts.opnfv.org/kvmfornfv.html + +.. _here: http://artifacts.opnfv.org/kvmfornfv.html + +Details of the function implemented: + +In install_Pcm function, it handles the installation of pcm utility and the required prerequisites for pcm-memory.x tool to execute. + +.. code:: bash + + $ git clone https://github.com/opcm/pcm + $ cd pcm + $ make + +In collect_MBWInfo Function,the below command is executed on the node which was collected to the logs +with the timestamp and testType.The function will be called at the begining of each testcase and +signal will be passed to terminate the pcm-memory process which was executing throughout the cyclic testcase. + +.. code:: bash + + $ pcm-memory.x 60 &>/root/MBWInfo/MBWInfo_${testType}_${timeStamp} + + where, + ${testType} = verify (or) daily + +Future Scope +------------ +PCM information will be added to cyclictest of kvm4nfv in yardstick. diff --git a/docs/release/userguide/tuning.userguide.rst b/docs/release/userguide/tuning.userguide.rst new file mode 100644 index 000000000..3673ae2d4 --- /dev/null +++ b/docs/release/userguide/tuning.userguide.rst @@ -0,0 +1,102 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. http://creativecommons.org/licenses/by/4.0 + +Low Latency Tunning Suggestion +============================== + +The correct configuration is critical for improving the NFV +performance/latency.Even working on the same codebase, configurations can cause +wildly different performance/latency results. + +There are many combinations of configurations, from hardware configuration to +Operating System configuration and application level configuration. And there +is no one simple configuration that works for every case. To tune a specific +scenario, it's important to know the behaviors of different configurations and +their impact. + +Platform Configuration +---------------------- + +Some hardware features can be configured through firmware interface(like BIOS) +but others may not be configurable (e.g. SMI on most platforms). + +* **Power management:** + Most power management related features save power at the + expensive of latency. These features include: Intel®Turbo Boost Technology, + Enhanced Intel®SpeedStep, Processor C state and P state. Normally they + should be disabled but, depending on the real-time application design and + latency requirements, there might be some features that can be enabled if + the impact on deterministic execution of the workload is small. + +* **Hyper-Threading:** + The logic cores that share resource with other logic cores can introduce + latency so the recommendation is to disable this feature for realtime use + cases. + +* **Legacy USB Support/Port 60/64 Emulation:** + These features involve some emulation in firmware and can introduce random + latency. It is recommended that they are disabled. + +* **SMI (System Management Interrupt):** + SMI runs outside of the kernel code and can potentially cause + latency. It is a pity there is no simple way to disable it. Some vendors may + provide related switches in BIOS but most machines do not have this + capability. + +Operating System Configuration +------------------------------ + +* **CPU isolation:** + To achieve deterministic latency, dedicated CPUs should be allocated for + realtime application. This can be achieved by isolating cpus from kernel + scheduler. Please refer to + http://lxr.free-electrons.com/source/Documentation/kernel-parameters.txt#L1608 + for more information. + +* **Memory allocation:** + Memory shoud be reserved for realtime applications and usually hugepage + should be used to reduce page fauts/TLB misses. + +* **IRQ affinity:** + All the non-realtime IRQs should be affinitized to non realtime CPUs to + reduce the impact on realtime CPUs. Some OS distributions contain an + irqbalance daemon which balances the IRQs among all the cores dynamically. + It should be disabled as well. + +* **Device assignment for VM:** + If a device is used in a VM, then device passthrough is desirable. In this + case,the IOMMU should be enabled. + +* **Tickless:** + Frequent clock ticks cause latency. CONFIG_NOHZ_FULL should be enabled in + the linux kernel. With CONFIG_NOHZ_FULL, the physical CPU will trigger many + fewer clock tick interrupts(currently, 1 tick per second). This can reduce + latency because each host timer interrupt triggers a VM exit from guest to + host which causes performance/latency impacts. + +* **TSC:** + Mark TSC clock source as reliable. A TSC clock source that seems to be + unreliable causes the kernel to continuously enable the clock source + watchdog to check if TSC frequency is still correct. On recent Intel + platforms with Constant TSC/Invariant TSC/Synchronized TSC, the TSC is + reliable so the watchdog is useless but cause latency. + +* **Idle:** + The poll option forces a polling idle loop that can slightly improve the + performance of waking up an idle CPU. + +* **RCU_NOCB:** + RCU is a kernel synchronization mechanism. Refer to + http://lxr.free-electrons.com/source/Documentation/RCU/whatisRCU.txt for more + information. With RCU_NOCB, the impact from RCU to the VNF will be reduced. + +* **Disable the RT throttling:** + RT Throttling is a Linux kernel mechanism that + occurs when a process or thread uses 100% of the core, leaving no resources + for the Linux scheduler to execute the kernel/housekeeping tasks. RT + Throttling increases the latency so should be disabled. + +* **NUMA configuration:** + To achieve the best latency. CPU/Memory and device allocated for realtime + application/VM should be in the same NUMA node. -- cgit 1.2.3-korg