diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/thermal/cpu_cooling.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/thermal/cpu_cooling.c')
-rw-r--r-- | kernel/drivers/thermal/cpu_cooling.c | 634 |
1 files changed, 605 insertions, 29 deletions
diff --git a/kernel/drivers/thermal/cpu_cooling.c b/kernel/drivers/thermal/cpu_cooling.c index f65f0d109..6ceac4f2d 100644 --- a/kernel/drivers/thermal/cpu_cooling.c +++ b/kernel/drivers/thermal/cpu_cooling.c @@ -26,10 +26,13 @@ #include <linux/thermal.h> #include <linux/cpufreq.h> #include <linux/err.h> +#include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/cpu.h> #include <linux/cpu_cooling.h> +#include <trace/events/thermal.h> + /* * Cooling state <-> CPUFreq frequency * @@ -45,6 +48,19 @@ */ /** + * struct power_table - frequency to power conversion + * @frequency: frequency in KHz + * @power: power in mW + * + * This structure is built when the cooling device registers and helps + * in translating frequency to power and viceversa. + */ +struct power_table { + u32 frequency; + u32 power; +}; + +/** * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device * registered. @@ -52,12 +68,21 @@ * registered cooling device. * @cpufreq_state: integer value representing the current state of cpufreq * cooling devices. - * @cpufreq_val: integer value representing the absolute value of the clipped + * @clipped_freq: integer value representing the absolute value of the clipped * frequency. * @max_level: maximum cooling level. One less than total number of valid * cpufreq frequencies. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * @node: list_head to link all cpufreq_cooling_device together. + * @last_load: load measured by the latest call to cpufreq_get_actual_power() + * @time_in_idle: previous reading of the absolute time that this cpu was idle + * @time_in_idle_timestamp: wall time of the last invocation of + * get_cpu_idle_time_us() + * @dyn_power_table: array of struct power_table for frequency to power + * conversion, sorted in ascending order. + * @dyn_power_table_entries: number of entries in the @dyn_power_table array + * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered + * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered * cpufreq_cooling_device. @@ -66,15 +91,25 @@ struct cpufreq_cooling_device { int id; struct thermal_cooling_device *cool_dev; unsigned int cpufreq_state; - unsigned int cpufreq_val; + unsigned int clipped_freq; unsigned int max_level; unsigned int *freq_table; /* In descending order */ struct cpumask allowed_cpus; struct list_head node; + u32 last_load; + u64 *time_in_idle; + u64 *time_in_idle_timestamp; + struct power_table *dyn_power_table; + int dyn_power_table_entries; + struct device *cpu_dev; + get_static_t plat_get_static_power; }; static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); +static unsigned int cpufreq_dev_count; + +static DEFINE_MUTEX(cooling_list_lock); static LIST_HEAD(cpufreq_dev_list); /** @@ -153,14 +188,14 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) { struct cpufreq_cooling_device *cpufreq_dev; - mutex_lock(&cooling_cpufreq_lock); + mutex_lock(&cooling_list_lock); list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { - mutex_unlock(&cooling_cpufreq_lock); + mutex_unlock(&cooling_list_lock); return get_level(cpufreq_dev, freq); } } - mutex_unlock(&cooling_cpufreq_lock); + mutex_unlock(&cooling_list_lock); pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu); return THERMAL_CSTATE_INVALID; @@ -183,26 +218,255 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, unsigned long event, void *data) { struct cpufreq_policy *policy = data; - unsigned long max_freq = 0; + unsigned long clipped_freq; struct cpufreq_cooling_device *cpufreq_dev; if (event != CPUFREQ_ADJUST) - return 0; + return NOTIFY_DONE; - mutex_lock(&cooling_cpufreq_lock); + mutex_lock(&cooling_list_lock); list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { - if (!cpumask_test_cpu(policy->cpu, - &cpufreq_dev->allowed_cpus)) + if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus)) continue; - max_freq = cpufreq_dev->cpufreq_val; + /* + * policy->max is the maximum allowed frequency defined by user + * and clipped_freq is the maximum that thermal constraints + * allow. + * + * If clipped_freq is lower than policy->max, then we need to + * readjust policy->max. + * + * But, if clipped_freq is greater than policy->max, we don't + * need to do anything. + */ + clipped_freq = cpufreq_dev->clipped_freq; + + if (policy->max > clipped_freq) + cpufreq_verify_within_limits(policy, 0, clipped_freq); + break; + } + mutex_unlock(&cooling_list_lock); + + return NOTIFY_OK; +} - if (policy->max != max_freq) - cpufreq_verify_within_limits(policy, 0, max_freq); +/** + * build_dyn_power_table() - create a dynamic power to frequency table + * @cpufreq_device: the cpufreq cooling device in which to store the table + * @capacitance: dynamic power coefficient for these cpus + * + * Build a dynamic power to frequency table for this cpu and store it + * in @cpufreq_device. This table will be used in cpu_power_to_freq() and + * cpu_freq_to_power() to convert between power and frequency + * efficiently. Power is stored in mW, frequency in KHz. The + * resulting table is in ascending order. + * + * Return: 0 on success, -EINVAL if there are no OPPs for any CPUs, + * -ENOMEM if we run out of memory or -EAGAIN if an OPP was + * added/enabled while the function was executing. + */ +static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device, + u32 capacitance) +{ + struct power_table *power_table; + struct dev_pm_opp *opp; + struct device *dev = NULL; + int num_opps = 0, cpu, i, ret = 0; + unsigned long freq; + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + dev = get_cpu_device(cpu); + if (!dev) { + dev_warn(&cpufreq_device->cool_dev->device, + "No cpu device for cpu %d\n", cpu); + continue; + } + + num_opps = dev_pm_opp_get_opp_count(dev); + if (num_opps > 0) + break; + else if (num_opps < 0) + return num_opps; } - mutex_unlock(&cooling_cpufreq_lock); + + if (num_opps == 0) + return -EINVAL; + + power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL); + if (!power_table) + return -ENOMEM; + + rcu_read_lock(); + + for (freq = 0, i = 0; + opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp); + freq++, i++) { + u32 freq_mhz, voltage_mv; + u64 power; + + if (i >= num_opps) { + rcu_read_unlock(); + ret = -EAGAIN; + goto free_power_table; + } + + freq_mhz = freq / 1000000; + voltage_mv = dev_pm_opp_get_voltage(opp) / 1000; + + /* + * Do the multiplication with MHz and millivolt so as + * to not overflow. + */ + power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv; + do_div(power, 1000000000); + + /* frequency is stored in power_table in KHz */ + power_table[i].frequency = freq / 1000; + + /* power is stored in mW */ + power_table[i].power = power; + } + + rcu_read_unlock(); + + if (i != num_opps) { + ret = PTR_ERR(opp); + goto free_power_table; + } + + cpufreq_device->cpu_dev = dev; + cpufreq_device->dyn_power_table = power_table; + cpufreq_device->dyn_power_table_entries = i; return 0; + +free_power_table: + kfree(power_table); + + return ret; +} + +static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device, + u32 freq) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (freq < pt[i].frequency) + break; + + return pt[i - 1].power; +} + +static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device, + u32 power) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (power < pt[i].power) + break; + + return pt[i - 1].frequency; +} + +/** + * get_load() - get load for a cpu since last updated + * @cpufreq_device: &struct cpufreq_cooling_device for this cpu + * @cpu: cpu number + * @cpu_idx: index of the cpu in cpufreq_device->allowed_cpus + * + * Return: The average load of cpu @cpu in percentage since this + * function was last called. + */ +static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu, + int cpu_idx) +{ + u32 load; + u64 now, now_idle, delta_time, delta_idle; + + now_idle = get_cpu_idle_time(cpu, &now, 0); + delta_idle = now_idle - cpufreq_device->time_in_idle[cpu_idx]; + delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu_idx]; + + if (delta_time <= delta_idle) + load = 0; + else + load = div64_u64(100 * (delta_time - delta_idle), delta_time); + + cpufreq_device->time_in_idle[cpu_idx] = now_idle; + cpufreq_device->time_in_idle_timestamp[cpu_idx] = now; + + return load; +} + +/** + * get_static_power() - calculate the static power consumed by the cpus + * @cpufreq_device: struct &cpufreq_cooling_device for this cpu cdev + * @tz: thermal zone device in which we're operating + * @freq: frequency in KHz + * @power: pointer in which to store the calculated static power + * + * Calculate the static power consumed by the cpus described by + * @cpu_actor running at frequency @freq. This function relies on a + * platform specific function that should have been provided when the + * actor was registered. If it wasn't, the static power is assumed to + * be negligible. The calculated static power is stored in @power. + * + * Return: 0 on success, -E* on failure. + */ +static int get_static_power(struct cpufreq_cooling_device *cpufreq_device, + struct thermal_zone_device *tz, unsigned long freq, + u32 *power) +{ + struct dev_pm_opp *opp; + unsigned long voltage; + struct cpumask *cpumask = &cpufreq_device->allowed_cpus; + unsigned long freq_hz = freq * 1000; + + if (!cpufreq_device->plat_get_static_power || + !cpufreq_device->cpu_dev) { + *power = 0; + return 0; + } + + rcu_read_lock(); + + opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz, + true); + voltage = dev_pm_opp_get_voltage(opp); + + rcu_read_unlock(); + + if (voltage == 0) { + dev_warn_ratelimited(cpufreq_device->cpu_dev, + "Failed to get voltage for frequency %lu: %ld\n", + freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0); + return -EINVAL; + } + + return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay, + voltage, power); +} + +/** + * get_dynamic_power() - calculate the dynamic power + * @cpufreq_device: &cpufreq_cooling_device for this cdev + * @freq: current frequency + * + * Return: the dynamic power consumed by the cpus described by + * @cpufreq_device. + */ +static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device, + unsigned long freq) +{ + u32 raw_cpu_power; + + raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq); + return (raw_cpu_power * cpufreq_device->last_load) / 100; } /* cpufreq cooling device callback functions are defined below */ @@ -273,15 +537,210 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, clip_freq = cpufreq_device->freq_table[state]; cpufreq_device->cpufreq_state = state; - cpufreq_device->cpufreq_val = clip_freq; + cpufreq_device->clipped_freq = clip_freq; cpufreq_update_policy(cpu); return 0; } +/** + * cpufreq_get_requested_power() - get the current power + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: pointer in which to store the resulting power + * + * Calculate the current power consumption of the cpus in milliwatts + * and store it in @power. This function should actually calculate + * the requested power, but it's hard to get the frequency that + * cpufreq would have assigned if there were no thermal limits. + * Instead, we calculate the current power on the assumption that the + * immediate future will look like the immediate past. + * + * We use the current frequency and the average load since this + * function was last called. In reality, there could have been + * multiple opps since this function was last called and that affects + * the load calculation. While it's not perfectly accurate, this + * simplification is good enough and works. REVISIT this, as more + * complex code may be needed if experiments show that it's not + * accurate enough. + * + * Return: 0 on success, -E* if getting the static power failed. + */ +static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + u32 *power) +{ + unsigned long freq; + int i = 0, cpu, ret; + u32 static_power, dynamic_power, total_load = 0; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + u32 *load_cpu = NULL; + + cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); + + /* + * All the CPUs are offline, thus the requested power by + * the cdev is 0 + */ + if (cpu >= nr_cpu_ids) { + *power = 0; + return 0; + } + + freq = cpufreq_quick_get(cpu); + + if (trace_thermal_power_cpu_get_power_enabled()) { + u32 ncpus = cpumask_weight(&cpufreq_device->allowed_cpus); + + load_cpu = kcalloc(ncpus, sizeof(*load_cpu), GFP_KERNEL); + } + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + u32 load; + + if (cpu_online(cpu)) + load = get_load(cpufreq_device, cpu, i); + else + load = 0; + + total_load += load; + if (trace_thermal_power_cpu_limit_enabled() && load_cpu) + load_cpu[i] = load; + + i++; + } + + cpufreq_device->last_load = total_load; + + dynamic_power = get_dynamic_power(cpufreq_device, freq); + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) { + kfree(load_cpu); + return ret; + } + + if (load_cpu) { + trace_thermal_power_cpu_get_power( + &cpufreq_device->allowed_cpus, + freq, load_cpu, i, dynamic_power, static_power); + + kfree(load_cpu); + } + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_state2power() - convert a cpu cdev state to power consumed + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @state: cooling device state to be converted + * @power: pointer in which to store the resulting power + * + * Convert cooling device state @state into power consumption in + * milliwatts assuming 100% load. Store the calculated power in + * @power. + * + * Return: 0 on success, -EINVAL if the cooling device state could not + * be converted into a frequency or other -E* if there was an error + * when calculating the static power. + */ +static int cpufreq_state2power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + unsigned long state, u32 *power) +{ + unsigned int freq, num_cpus; + cpumask_t cpumask; + u32 static_power, dynamic_power; + int ret; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpumask_and(&cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask); + num_cpus = cpumask_weight(&cpumask); + + /* None of our cpus are online, so no power */ + if (num_cpus == 0) { + *power = 0; + return 0; + } + + freq = cpufreq_device->freq_table[state]; + if (!freq) + return -EINVAL; + + dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus; + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) + return ret; + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_power2state() - convert power to a cooling device state + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: power in milliwatts to be converted + * @state: pointer in which to store the resulting state + * + * Calculate a cooling device state for the cpus described by @cdev + * that would allow them to consume at most @power mW and store it in + * @state. Note that this calculation depends on external factors + * such as the cpu load or the current static power. Calling this + * function with the same power as input can yield different cooling + * device states depending on those external factors. + * + * Return: 0 on success, -ENODEV if no cpus are online or -EINVAL if + * the calculated frequency could not be converted to a valid state. + * The latter should not happen unless the frequencies available to + * cpufreq have changed since the initialization of the cpu cooling + * device. + */ +static int cpufreq_power2state(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 power, + unsigned long *state) +{ + unsigned int cpu, cur_freq, target_freq; + int ret; + s32 dyn_power; + u32 last_load, normalised_power, static_power; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); + + /* None of our cpus are online */ + if (cpu >= nr_cpu_ids) + return -ENODEV; + + cur_freq = cpufreq_quick_get(cpu); + ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power); + if (ret) + return ret; + + dyn_power = power - static_power; + dyn_power = dyn_power > 0 ? dyn_power : 0; + last_load = cpufreq_device->last_load ?: 1; + normalised_power = (dyn_power * 100) / last_load; + target_freq = cpu_power_to_freq(cpufreq_device, normalised_power); + + *state = cpufreq_cooling_get_level(cpu, target_freq); + if (*state == THERMAL_CSTATE_INVALID) { + dev_warn_ratelimited(&cdev->device, + "Failed to convert %dKHz for cpu %d into a cdev state\n", + target_freq, cpu); + return -EINVAL; + } + + trace_thermal_power_cpu_limit(&cpufreq_device->allowed_cpus, + target_freq, *state, power); + return 0; +} + /* Bind cpufreq callbacks to thermal cooling device ops */ -static struct thermal_cooling_device_ops const cpufreq_cooling_ops = { +static struct thermal_cooling_device_ops cpufreq_cooling_ops = { .get_max_state = cpufreq_get_max_state, .get_cur_state = cpufreq_get_cur_state, .set_cur_state = cpufreq_set_cur_state, @@ -311,6 +770,9 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. * Normally this should be same as cpufreq policy->related_cpus. + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -322,13 +784,14 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus) + const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev; char dev_name[THERMAL_NAME_LENGTH]; struct cpufreq_frequency_table *pos, *table; - unsigned int freq, i; + unsigned int freq, i, num_cpus; int ret; table = cpufreq_frequency_get_table(cpumask_first(clip_cpus)); @@ -341,6 +804,23 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); + num_cpus = cpumask_weight(clip_cpus); + cpufreq_dev->time_in_idle = kcalloc(num_cpus, + sizeof(*cpufreq_dev->time_in_idle), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_cdev; + } + + cpufreq_dev->time_in_idle_timestamp = + kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle_timestamp) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_time_in_idle; + } + /* Find max levels */ cpufreq_for_each_valid_entry(pos, table) cpufreq_dev->max_level++; @@ -349,7 +829,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_dev->max_level, GFP_KERNEL); if (!cpufreq_dev->freq_table) { cool_dev = ERR_PTR(-ENOMEM); - goto free_cdev; + goto free_time_in_idle_timestamp; } /* max_level is an index, not a counter */ @@ -357,10 +837,24 @@ __cpufreq_cooling_register(struct device_node *np, cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); + if (capacitance) { + cpufreq_cooling_ops.get_requested_power = + cpufreq_get_requested_power; + cpufreq_cooling_ops.state2power = cpufreq_state2power; + cpufreq_cooling_ops.power2state = cpufreq_power2state; + cpufreq_dev->plat_get_static_power = plat_static_func; + + ret = build_dyn_power_table(cpufreq_dev, capacitance); + if (ret) { + cool_dev = ERR_PTR(ret); + goto free_table; + } + } + ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { cool_dev = ERR_PTR(ret); - goto free_table; + goto free_power_table; } snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", @@ -383,25 +877,33 @@ __cpufreq_cooling_register(struct device_node *np, pr_debug("%s: freq:%u KHz\n", __func__, freq); } - cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0]; + cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0]; cpufreq_dev->cool_dev = cool_dev; mutex_lock(&cooling_cpufreq_lock); + mutex_lock(&cooling_list_lock); + list_add(&cpufreq_dev->node, &cpufreq_dev_list); + mutex_unlock(&cooling_list_lock); + /* Register the notifier for first cpufreq cooling device */ - if (list_empty(&cpufreq_dev_list)) + if (!cpufreq_dev_count++) cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); - list_add(&cpufreq_dev->node, &cpufreq_dev_list); - mutex_unlock(&cooling_cpufreq_lock); return cool_dev; remove_idr: release_idr(&cpufreq_idr, cpufreq_dev->id); +free_power_table: + kfree(cpufreq_dev->dyn_power_table); free_table: kfree(cpufreq_dev->freq_table); +free_time_in_idle_timestamp: + kfree(cpufreq_dev->time_in_idle_timestamp); +free_time_in_idle: + kfree(cpufreq_dev->time_in_idle); free_cdev: kfree(cpufreq_dev); @@ -422,7 +924,7 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus) { - return __cpufreq_cooling_register(NULL, clip_cpus); + return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); @@ -446,11 +948,78 @@ of_cpufreq_cooling_register(struct device_node *np, if (!np) return ERR_PTR(-EINVAL); - return __cpufreq_cooling_register(np, clip_cpus); + return __cpufreq_cooling_register(np, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); /** + * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this function, the + * cooling device will implement the power extensions by using a + * simple cpu power model. The cpus must have registered their OPPs + * using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) +{ + return __cpufreq_cooling_register(NULL, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(cpufreq_power_cooling_register); + +/** + * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @np: a valid struct device_node to the cooling device device tree node + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this API, the cpufreq + * cooling device will be linked to the device tree node provided. + * Using this function, the cooling device will implement the power + * extensions by using a simple cpu power model. The cpus must have + * registered their OPPs using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + if (!np) + return ERR_PTR(-EINVAL); + + return __cpufreq_cooling_register(np, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(of_cpufreq_power_cooling_register); + +/** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. * @@ -464,17 +1033,24 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) return; cpufreq_dev = cdev->devdata; - mutex_lock(&cooling_cpufreq_lock); - list_del(&cpufreq_dev->node); /* Unregister the notifier for the last cpufreq cooling device */ - if (list_empty(&cpufreq_dev_list)) + mutex_lock(&cooling_cpufreq_lock); + if (!--cpufreq_dev_count) cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); + + mutex_lock(&cooling_list_lock); + list_del(&cpufreq_dev->node); + mutex_unlock(&cooling_list_lock); + mutex_unlock(&cooling_cpufreq_lock); thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); + kfree(cpufreq_dev->dyn_power_table); + kfree(cpufreq_dev->time_in_idle_timestamp); + kfree(cpufreq_dev->time_in_idle); kfree(cpufreq_dev->freq_table); kfree(cpufreq_dev); } |