diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/staging/rdma/hfi1/eprom.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/staging/rdma/hfi1/eprom.c')
-rw-r--r-- | kernel/drivers/staging/rdma/hfi1/eprom.c | 475 |
1 files changed, 475 insertions, 0 deletions
diff --git a/kernel/drivers/staging/rdma/hfi1/eprom.c b/kernel/drivers/staging/rdma/hfi1/eprom.c new file mode 100644 index 000000000..b61d3ae93 --- /dev/null +++ b/kernel/drivers/staging/rdma/hfi1/eprom.c @@ -0,0 +1,475 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <linux/delay.h> +#include "hfi.h" +#include "common.h" +#include "eprom.h" + +/* + * The EPROM is logically divided into two partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_START P0_SIZE + +/* largest erase size supported by the controller */ +#define SIZE_32KB (32 * 1024) +#define MASK_32KB (SIZE_32KB - 1) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1) + +/* controller commands */ +#define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_PAGE_PROGRAM(addr) ((0x02 << CMD_SHIFT) | addr) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) +#define CMD_READ_SR1 ((0x05 << CMD_SHIFT)) +#define CMD_WRITE_ENABLE ((0x06 << CMD_SHIFT)) +#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr) +#define CMD_CHIP_ERASE ((0x60 << CMD_SHIFT)) +#define CMD_READ_MANUF_DEV_ID ((0x90 << CMD_SHIFT)) +#define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) + +/* controller interface speeds */ +#define EP_SPEED_FULL 0x2 /* full speed */ + +/* controller status register 1 bits */ +#define SR1_BUSY 0x1ull /* the BUSY bit in SR1 */ + +/* sleep length while waiting for controller */ +#define WAIT_SLEEP_US 100 /* must be larger than 5 (see usage) */ +#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US)) + +/* GPIO pins */ +#define EPROM_WP_N (1ull << 14) /* EPROM write line */ + +/* + * Use the EP mutex to guard against other callers from within the driver. + * Also covers usage of eprom_available. + */ +static DEFINE_MUTEX(eprom_mutex); +static int eprom_available; /* default: not available */ + +/* + * Turn on external enable line that allows writing on the flash. + */ +static void write_enable(struct hfi1_devdata *dd) +{ + /* raise signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N); + /* raise enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N); +} + +/* + * Turn off external enable line that allows writing on the flash. + */ +static void write_disable(struct hfi1_devdata *dd) +{ + /* lower signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N); + /* lower enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N); +} + +/* + * Wait for the device to become not busy. Must be called after all + * write or erase operations. + */ +static int wait_for_not_busy(struct hfi1_devdata *dd) +{ + unsigned long count = 0; + u64 reg; + int ret = 0; + + /* starts page mode */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1); + while (1) { + udelay(WAIT_SLEEP_US); + usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5); + count++; + reg = read_csr(dd, ASIC_EEP_DATA); + if ((reg & SR1_BUSY) == 0) + break; + /* 200s is the largest time for a 128Mb device */ + if (count > COUNT_DELAY_SEC(200)) { + dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n"); + ret = -ETIMEDOUT; + break; /* break, not goto - must stop page mode */ + } + } + + /* stop page mode with a NOP */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); + + return ret; +} + +/* + * Read the device ID from the SPI controller. + */ +static u32 read_device_id(struct hfi1_devdata *dd) +{ + /* read the Manufacture Device ID */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID); + return (u32)read_csr(dd, ASIC_EEP_DATA); +} + +/* + * Erase the whole flash. + */ +static int erase_chip(struct hfi1_devdata *dd) +{ + int ret; + + write_enable(dd); + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE); + ret = wait_for_not_busy(dd); + + write_disable(dd); + + return ret; +} + +/* + * Erase a range using the 32KB erase command. + */ +static int erase_32kb_range(struct hfi1_devdata *dd, u32 start, u32 end) +{ + int ret = 0; + + if (end < start) + return -EINVAL; + + if ((start & MASK_32KB) || (end & MASK_32KB)) { + dd_dev_err(dd, + "%s: non-aligned range (0x%x,0x%x) for a 32KB erase\n", + __func__, start, end); + return -EINVAL; + } + + write_enable(dd); + + for (; start < end; start += SIZE_32KB) { + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, + CMD_SECTOR_ERASE_32KB(start)); + ret = wait_for_not_busy(dd); + if (ret) + goto done; + } + +done: + write_disable(dd); + + return ret; +} + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset. Copy to user address addr. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + read_page(dd, start + offset, buffer); + if (copy_to_user((void __user *)(addr + offset), + buffer, EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + } + +done: + return ret; +} + +/* + * Write a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_DATA, data[0]); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset)); + for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++) + write_csr(dd, ASIC_EEP_DATA, data[i]); + /* will close the open page */ + return wait_for_not_busy(dd); +} + +/* + * Write length bytes starting at offset. Read from user address addr. + */ +static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + write_enable(dd); + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + if (copy_from_user(buffer, (void __user *)(addr + offset), + EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + ret = write_page(dd, start + offset, buffer); + if (ret) + goto done; + } + +done: + write_disable(dd); + return ret; +} + +/* + * Perform the given operation on the EPROM. Called from user space. The + * user credentials have already been checked. + * + * Return 0 on success, -ERRNO on error + */ +int handle_eprom_command(const struct hfi1_cmd *cmd) +{ + struct hfi1_devdata *dd; + u32 dev_id; + int ret = 0; + + /* + * The EPROM is per-device, so use unit 0 as that will always + * exist. + */ + dd = hfi1_lookup(0); + if (!dd) { + pr_err("%s: cannot find unit 0!\n", __func__); + return -EINVAL; + } + + /* lock against other callers touching the ASIC block */ + mutex_lock(&eprom_mutex); + + /* some platforms do not have an EPROM */ + if (!eprom_available) { + ret = -ENOSYS; + goto done_asic; + } + + /* lock against the other HFI on another OS */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n", + __func__, cmd->type, cmd->len, cmd->addr); + + switch (cmd->type) { + case HFI1_CMD_EP_INFO: + if (cmd->len != sizeof(u32)) { + ret = -ERANGE; + break; + } + dev_id = read_device_id(dd); + /* addr points to a u32 user buffer */ + if (copy_to_user((void __user *)cmd->addr, &dev_id, + sizeof(u32))) + ret = -EFAULT; + break; + case HFI1_CMD_EP_ERASE_CHIP: + ret = erase_chip(dd); + break; + case HFI1_CMD_EP_ERASE_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, 0, cmd->len); + break; + case HFI1_CMD_EP_ERASE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, P1_START, P1_START + cmd->len); + break; + case HFI1_CMD_EP_READ_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = read_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_READ_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = read_length(dd, P1_START, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P0: + if (cmd->len > P0_SIZE) { + ret = -ERANGE; + break; + } + ret = write_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = write_length(dd, P1_START, cmd->len, cmd->addr); + break; + default: + dd_dev_err(dd, "%s: unexpected command %d\n", + __func__, cmd->type); + ret = -EINVAL; + break; + } + + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} + +/* + * Initialize the EPROM handler. + */ +int eprom_init(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* only the discrete chip has an EPROM, nothing to do */ + if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0) + return 0; + + /* lock against other callers */ + mutex_lock(&eprom_mutex); + if (eprom_available) /* already initialized */ + goto done_asic; + + /* + * Lock against the other HFI on another OS - the mutex above + * would have caught anything in this driver. It is OK if + * both OSes reset the EPROM - as long as they don't do it at + * the same time. + */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + /* reset EPROM to be sure it is in a good state */ + + /* set reset */ + write_csr(dd, ASIC_EEP_CTL_STAT, + ASIC_EEP_CTL_STAT_EP_RESET_SMASK); + /* clear reset, set speed */ + write_csr(dd, ASIC_EEP_CTL_STAT, + EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT); + + /* wake the device with command "release powerdown NoID" */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID); + + eprom_available = 1; + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} |