#!/bin/bash

set -ex

#need to put mutiple cases here where decide this bundle to deploy by default use the odl bundle.
# Below parameters are the default and we can according the release

opnfvsdn=nosdn
opnfvtype=nonha
openstack=mitaka
opnfvlab=default
opnfvrel=c
opnfvfeature=none
opnfvdistro=xenial
opnfvarch=amd64

jujuver=`juju --version`

read_config() {
    opnfvrel=`grep release: deploy.yaml | cut -d ":" -f2`
    openstack=`grep openstack: deploy.yaml | cut -d ":" -f2`
    opnfvtype=`grep type: deploy.yaml | cut -d ":" -f2`
    opnfvlab=`grep lab: deploy.yaml | cut -d ":" -f2`
    opnfvsdn=`grep sdn: deploy.yaml | cut -d ":" -f2`
}

usage() { echo "Usage: $0 [-s <nosdn|odl|opencontrail>]
                         [-t <nonha|ha|tip>]
                         [-o <juno|liberty>]
                         [-l <default|intelpod5>]
                         [-f <ipv6,dpdk,lxd,dvr>]
                         [-d <trusty|xenial>]
                         [-a <amd64>]
                         [-r <a|b>]" 1>&2 exit 1; }

while getopts ":s:t:o:l:h:r:f:d:a:" opt; do
    case "${opt}" in
        s)
            opnfvsdn=${OPTARG}
            ;;
        t)
            opnfvtype=${OPTARG}
            ;;
        o)
            openstack=${OPTARG}
            ;;
        l)
            opnfvlab=${OPTARG}
            ;;
        r)
            opnfvrel=${OPTARG}
            ;;
        f)
            opnfvfeature=${OPTARG}
            ;;
        d)
            opnfvdistro=${OPTARG}
            ;;
        a)
            opnfvarch=${OPTARG}
            ;;
        h)
            usage
            ;;
        *)
            ;;
    esac
done

#by default maas creates two VMs in case of three more VM needed.
createresource() {
    maas_ip=`grep " ip_address" deployment.yaml | cut -d " "  -f 10`
    apikey=`grep maas-oauth: environments.yaml | cut -d "'" -f 2`
    maas login maas http://${maas_ip}/MAAS/api/1.0 ${apikey}

    nodeexist=`maas maas nodes list hostname=node3-control`

    if [ $nodeexist != *node3* ]; then
        sudo virt-install --connect qemu:///system --name node3-control --ram 8192 --vcpus 4 --disk size=120,format=qcow2,bus=virtio,io=native,pool=default --network bridge=virbr0,model=virtio --network bridge=virbr0,model=virtio --boot network,hd,menu=off --noautoconsole --vnc --print-xml | tee node3-control

        sudo virt-install --connect qemu:///system --name node4-control --ram 8192 --vcpus 4 --disk size=120,format=qcow2,bus=virtio,io=native,pool=default --network bridge=virbr0,model=virtio --network bridge=virbr0,model=virtio --boot network,hd,menu=off --noautoconsole --vnc --print-xml | tee node4-control

        node3controlmac=`grep  "mac address" node3-control | head -1 | cut -d "'" -f 2`
        node4controlmac=`grep  "mac address" node4-control | head -1 | cut -d "'" -f 2`

        sudo virsh -c qemu:///system define --file node3-control
        sudo virsh -c qemu:///system define --file node4-control

        controlnodeid=`maas maas nodes new autodetect_nodegroup='yes' name='node3-control' tags='control' hostname='node3-control' power_type='virsh' mac_addresses=$node3controlmac power_parameters_power_address='qemu+ssh://'$USER'@192.168.122.1/system' architecture='amd64/generic' power_parameters_power_id='node3-control' | grep system_id | cut -d '"' -f 4 `

        maas maas tag update-nodes control add=$controlnodeid

        controlnodeid=`maas maas nodes new autodetect_nodegroup='yes' name='node4-control' tags='control' hostname='node4-control' power_type='virsh' mac_addresses=$node4controlmac power_parameters_power_address='qemu+ssh://'$USER'@192.168.122.1/system' architecture='amd64/generic' power_parameters_power_id='node4-control' | grep system_id | cut -d '"' -f 4 `

        maas maas tag update-nodes control add=$controlnodeid

    fi
}

#copy the files and create extra resources needed for HA deployment
# in case of default VM labs.
deploy() {

    if [ ! -f ./environments.yaml ] && [ -e ~/.juju/environments.yaml ]; then
        cp ~/.juju/environments.yaml ./environments.yaml
    elif [ ! -f ./environments.yaml ] && [ -e ~/joid_config/environments.yaml ]; then
        cp ~/joid_config/environments.yaml ./environments.yaml
    fi
    if [ ! -f ./deployment.yaml ] && [ -e ~/.juju/deployment.yaml ]; then
        cp ~/.juju/deployment.yaml ./deployment.yaml
    elif [ ! -f ./deployment.yaml ] && [ -e ~/joid_config/deployment.yaml ]; then
        cp ~/joid_config/deployment.yaml ./deployment.yaml
    fi
    if [ ! -f ./labconfig.yaml ] && [ -e ~/.juju/labconfig.yaml ]; then
        cp ~/.juju/labconfig.yaml ./labconfig.yaml
    elif [ ! -f ./labconfig.yaml ] && [ -e ~/joid_config/labconfig.yaml ]; then
        cp ~/joid_config/labconfig.yaml ./labconfig.yaml
    fi
    if [ ! -f ./deployconfig.yaml ] && [ -e ~/.juju/deployconfig.yaml ]; then
        cp ~/.juju/deployconfig.yaml ./deployconfig.yaml
    elif [ ! -f ./deployconfig.yaml ] && [ -e ~/joid_config/deployconfig.yaml ]; then
        cp ~/joid_config/deployconfig.yaml ./deployconfig.yaml
    fi

    #copy the script which needs to get deployed as part of ofnfv release
    echo "...... deploying now ......"
    echo "   " >> environments.yaml
    echo "        enable-os-refresh-update: false" >> environments.yaml
    echo "        enable-os-upgrade: false" >> environments.yaml
    echo "        admin-secret: admin" >> environments.yaml
    echo "        default-series: $opnfvdistro" >> environments.yaml

    cp environments.yaml ~/.juju/
    cp environments.yaml ~/joid_config/

    if [[ "$opnfvtype" = "ha" && "$opnfvlab" = "default" ]]; then
        createresource
    fi

    #bootstrap the node
    ./01-bootstrap.sh

    if [[ "$jujuver" > "2" ]]; then
        juju model-config default-series=$opnfvdistro enable-os-refresh-update=false enable-os-upgrade=false
    fi

    #case default deploy the opnfv platform:
    ./02-deploybundle.sh $opnfvtype $openstack $opnfvlab $opnfvsdn $opnfvfeature $opnfvdistro
}

#check whether charms are still executing the code even juju-deployer says installed.
check_status() {
    retval=0
    timeoutiter=0
    while [ $retval -eq 0 ]; do
       sleep 30
       juju status > status.txt
       if [ "$(grep -c "executing" status.txt )" -ge 1 ]; then
           echo " still executing the reltionship within charms ..."
           if [ $timeoutiter -ge 120 ]; then
               retval=1
           fi
           timeoutiter=$((timeoutiter+1))
       else
           retval=1
       fi
    done

    juju expose ceph-radosgw
    #juju ssh ceph/0 \ 'sudo radosgw-admin user create --uid="ubuntu" --display-name="Ubuntu Ceph"'

    echo "...... deployment finishing ......."
}

echo "...... deployment started ......"
deploy

check_status

echo "...... deployment finished  ......."

./openstack.sh "$opnfvsdn" "$opnfvlab" "$opnfvdistro" "$openstack" || true

# creating heat domain after puching the public API into /etc/hosts

if [[ "$jujuver" > "2" ]]; then
    status=`juju run-action heat/0 domain-setup`
    echo $status
else
    status=`juju action do heat/0 domain-setup`
    echo $status
fi


sudo ../juju/get-cloud-images || true
../juju/joid-configure-openstack || true

echo "...... finished  ......."