From 893a490ab1343e19adafc5ba6fa3d4711ec88d1c Mon Sep 17 00:00:00 2001 From: Narinder Gupta Date: Tue, 28 Feb 2017 22:34:12 -0600 Subject: modfiied to include both vxlan and gre overlay providers. Also set the defaukt tenant network providers to vxlan by default. Change-Id: Ic7bd872060575d0d83039cc3ff195a508179282a Signed-off-by: Narinder Gupta --- .../release/installation/installationprocedure.rst | 35 ++++++++++------------ 1 file changed, 15 insertions(+), 20 deletions(-) (limited to 'docs/release/installation') diff --git a/docs/release/installation/installationprocedure.rst b/docs/release/installation/installationprocedure.rst index 65560b1c..f5f4ece2 100644 --- a/docs/release/installation/installationprocedure.rst +++ b/docs/release/installation/installationprocedure.rst @@ -9,10 +9,10 @@ Networking: **Minimum 2 networks** -| ``1. First for Admin network with gateway to access external network`` -| ``2. Second for public network to consume by tenants for floating ips`` +| ``1. First for Admin/Management network with gateway to access external network`` +| ``2. Second for floating ip network to consume by tenants for floating ips`` -**NOTE: JOID support multiple isolated networks for data as well as storage. +**NOTE: JOID support multiple isolated networks for API, data as well as storage. Based on your network options for Openstack.** **Minimum 6 physical servers** @@ -23,15 +23,15 @@ Based on your network options for Openstack.** | ``  CPU cores: 16`` | ``  Memory: 32 GB`` | ``  Hard Disk: 1(250 GB)`` -| ``  NIC: eth0(Admin, Management), eth1 (external network)`` +| ``  NIC: if0(Admin, Management), if1 (external network)`` 2. Node servers (minimum 5): | ``  Minimum H/W Spec`` | ``  CPU cores: 16`` | ``  Memory: 32 GB`` -| ``  Hard Disk: 1(1 TB) this includes the space for ceph as well`` -| ``  NIC: eth0(Admin, Management), eth1 (external network)`` +| ``  Hard Disk: 2(1 TB preferred SSD) this includes the space for ceph as well`` +| ``  NIC: if0 (Admin, Management), if1 (external network)`` **NOTE: Above configuration is minimum and for better performance and usage of @@ -43,7 +43,7 @@ Make sure all servers are connected to top of rack switch and config Jump node configuration: ------------------------ -1. Install Ubuntu 14.04 LTS server version of OS on the nodes. +1. Install Ubuntu 16.04.1 LTS server version of OS on the nodes. 2. Install the git and bridge-utils packages on the server and configure minimum two bridges on jump host: brAdm and brPublic cat /etc/network/interfaces @@ -54,21 +54,16 @@ brAdm and brPublic cat /etc/network/interfaces | ``   iface eth0 inet manual`` | ``   auto brAdm `` | ``   iface brAdm inet static`` -| ``       address 10.4.1.1`` -| ``       netmask 255.255.248.0`` -| ``       network 10.4.0.0`` -| ``       broadcast 10.4.7.255`` -| ``       gateway 10.4.0.1`` -| ``       # dns-* options are implemented by the resolvconf package, if installed`` -| ``       dns-nameservers 10.4.0.2`` -| ``       bridge_ports eth0`` +| ``       address 10.5.1.1`` +| ``       netmask 255.255.255.0`` +| ``       bridge_ports if0`` | ``   auto brPublic`` | ``   iface brPublic inet static`` -| ``       address 10.2.66.2`` -| Seperate yaml fi ``       netmask 255.255.255.0`` -| ``       bridge_ports eth2`` +| ``       address 10.5.15.1`` +| ``       netmask 255.255.255.0`` +| ``       bridge_ports if1`` -**NOTE: If you choose to use the separate network for management, data and +**NOTE: If you choose to use the separate network for management, pulic , data and storage then you need to create bridge for each interface. In case of VLAN tags use the appropriate network on jump-host depend upon VLAN ID on the interface.** @@ -78,7 +73,7 @@ Configure JOID for your lab **Get the joid code from gerritt** -*git clone https://gerrit.opnfv.org/gerrit/p/joid.git* +*git clone https://gerrit.opnfv.org/gerrit/joid.git* **Enable MAAS (labconfig.yaml is must and base for MAAS installation and scenario deployment)** -- cgit 1.2.3-korg