From 91cac14de17bfe686d8872c3c4548ac4b5f673ca Mon Sep 17 00:00:00 2001 From: Narinder Gupta Date: Wed, 18 May 2016 00:47:50 -0500 Subject: modified all intel lab labconfig Change-Id: I79a80255cac4355bc1ec39348e31913c748f9fcc Signed-off-by: Narinder Gupta --- ci/02-maasdeploy.sh | 87 ++++++------ ci/maas/intel/pod5/deployment.yaml | 257 ---------------------------------- ci/maas/intel/pod5/environments.yaml | 40 ------ ci/maas/intel/pod6/deployment.yaml | 260 ----------------------------------- ci/maas/intel/pod9/deployment.yaml | 230 ------------------------------- labconfig/default/deployment.yaml | 147 ++++++++++++++++++++ labconfig/default/labconfig.yaml | 12 +- labconfig/intel/pod5/labconfig.yaml | 4 +- 8 files changed, 194 insertions(+), 843 deletions(-) delete mode 100755 ci/maas/intel/pod5/deployment.yaml delete mode 100644 ci/maas/intel/pod5/environments.yaml delete mode 100755 ci/maas/intel/pod6/deployment.yaml delete mode 100755 ci/maas/intel/pod9/deployment.yaml create mode 100644 labconfig/default/deployment.yaml diff --git a/ci/02-maasdeploy.sh b/ci/02-maasdeploy.sh index 32679f12..f40631e5 100755 --- a/ci/02-maasdeploy.sh +++ b/ci/02-maasdeploy.sh @@ -3,6 +3,7 @@ set -ex virtinstall=0 +labname = $1 #install the packages needed sudo apt-add-repository ppa:maas-deployers/stable -y @@ -36,53 +37,51 @@ if [ "$1" == "custom" ]; then if [ ! -e ./labconfig.yaml ]; then virtinstall=1 + cp ../labconfig/default/deployment.yaml ./ cp ../labconfig/default/labconfig.yaml ./ - python deploy.py fi + labname=`grep "lab_location" labconfig.yaml | cut -d ':' -f 2 | sed -e 's/ //'` +else + case "$1" in + 'intelpod5' ) + cp ../labconfig/intel/pod5/labconfig.yaml ./ + #to be removed later once converted for all labs. + python deploy.py + ;; + 'intelpod6' ) + cp ../labconfig/intel/pod6/labconfig.yaml ./ + #to be removed later once converted for all labs. + python deploy.py + ;; + 'intelpod9' ) + cp ../labconfig/intel/pod6/labconfig.yaml ./ + #to be removed later once converted for all labs. + python deploy.py + ;; + 'orangepod1' ) + cp maas/orange/pod1/deployment.yaml ./deployment.yaml + ;; + 'orangepod2' ) + cp maas/orange/pod2/deployment.yaml ./deployment.yaml + ;; + 'attvirpod1' ) + cp maas/att/virpod1/deployment.yaml ./deployment.yaml + ;; + 'juniperpod1' ) + cp maas/juniper/pod1/deployment.yaml ./deployment.yaml + ;; + 'cengnlynxpod1' ) + cp maas/cengn_lynx/pod1/deployment.yaml ./deployment.yaml + ;; + * ) + virtinstall=1 + labname = "default" + ./cleanvm.sh + cp ../labconfig/default/deployment.yaml ./ + ;; + esac fi -case "$1" in - 'intelpod5' ) - cp ../labconfig/intel/pod5/labconfig.yaml ./ - #to be removed later once converted for all labs. - python deploy.py - ;; - 'intelpod6' ) - cp ../labconfig/intel/pod6/labconfig.yaml ./ - #to be removed later once converted for all labs. - python deploy.py - ;; - 'intelpod9' ) - cp ../labconfig/intel/pod6/labconfig.yaml ./ - #to be removed later once converted for all labs. - python deploy.py - ;; - 'orangepod1' ) - cp maas/orange/pod1/deployment.yaml ./deployment.yaml - ;; - 'orangepod2' ) - cp maas/orange/pod2/deployment.yaml ./deployment.yaml - ;; - 'attvirpod1' ) - cp maas/att/virpod1/deployment.yaml ./deployment.yaml - ;; - 'juniperpod1' ) - cp maas/juniper/pod1/deployment.yaml ./deployment.yaml - ;; - 'cengnlynxpod1' ) - cp maas/cengn_lynx/pod1/deployment.yaml ./deployment.yaml - ;; - 'custom' ) - cp maas/custom/deployment.yaml ./deployment.yaml - ;; - * ) - virtinstall=1 - ./cleanvm.sh - cp maas/default/deployment.yaml ./deployment.yaml - ;; -esac - - #make sure no password asked during the deployment. echo "$USER ALL=(ALL) NOPASSWD:ALL" > 90-joid-init @@ -232,7 +231,7 @@ if [ "$virtinstall" -eq 1 ]; then fi # Enable vlan interfaces with maas -case "$1" in +case "$labname" in 'intelpod5' ) maas refresh enableautomodebyname eth4 AUTO "10.5.12.0/24" compute || true diff --git a/ci/maas/intel/pod5/deployment.yaml b/ci/maas/intel/pod5/deployment.yaml deleted file mode 100755 index be8a7732..00000000 --- a/ci/maas/intel/pod5/deployment.yaml +++ /dev/null @@ -1,257 +0,0 @@ -# This file defines the deployment for the MAAS environment which is to be -# deployed and automated. -demo-maas: - maas: - # Defines the general setup for the MAAS environment, including the - # username and password for the host as well as the MAAS server. - user: ubuntu - password: ubuntu - - # Contains the virtual machine parameters for creating the MAAS virtual - # server. Here you can configure the name of the virsh domain, the - # parameters for how the network is attached. - name: opnfv-maas-intel - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 160G - release: trusty - - # Apt http proxy setting(s) - apt_http_proxy: - - apt_sources: - - ppa:maas/stable - - ppa:juju/stable - - boot_source: - url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ - keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg - exclusive: true - selections: - 1: - release: trusty - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - 2: - release: xenial - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - - # Virsh power settings - # Specifies the uri and keys to use for virsh power control of the - # juju virtual machine. If the uri is omitted, the value for the - # --remote is used. If no power settings are desired, then do not - # supply the virsh block. - virsh: - rsa_priv_key: /home/ubuntu/.ssh/id_rsa - rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://jenkins@10.5.1.1/system - - # Defines the IP Address that the configuration script will use to - # to access the MAAS controller via SSH. - ip_address: 10.5.1.2 - - # This section allows the user to set a series of options on the - # MAAS server itself. The list of config options can be found in - # the upstream MAAS documentation: - # - http://maas.ubuntu.com/docs/api.html#maas-server - settings: - main_archive: http://us.archive.ubuntu.com/ubuntu - upstream_dns: 8.8.8.8 - maas_name: intelpod5 - # kernel_opts: "console=tty0 console=ttyS1,115200n8" - # ntp_server: ntp.ubuntu.com - - # This section is used to define the networking parameters for when - # the node first comes up. It is fed into the meta-data cloud-init - # configuration and is used to configure the networking piece of the - # service. The contents of this section are written directly to the - # /etc/network/interfaces file. - # - # Please note, this is slightly different than the - # node-group-interfaces section below. This will configure the - # machine's networking params, and the node-group-interfaces will - # configure the maas node-group interfaces which is used for - # controlling the dhcp, dns, etc. - network_config: | - auto lo - iface lo inet loopback - - auto eth0 - iface eth0 inet static - address 10.5.1.2 - netmask 255.255.255.0 - network 10.5.1.0 - broadcast 10.5.1.255 - gateway 10.5.1.1 - dns-nameservers 8.8.8.8 10.5.1.2 127.0.0.1 - - auto eth1 - iface eth1 inet static - address 10.5.12.2 - netmask 255.255.255.0 - - auto eth2 - iface eth2 inet static - address 10.5.15.2 - netmask 255.255.255.0 - - auto eth3 - iface eth3 inet static - address 10.2.117.92 - netmask 255.255.255.0 - #auto lo - #iface lo inet loopback - - #auto eth0 - #iface eth0 inet static - # address 192.168.122.2 - # netmask 255.255.248.0 - # network 192.168.122.0 - # broadcast 192.168.122.255 - # gateway 192.168.122.1 - # dns-nameservers 192.168.122.1 127.0.0.1 - - # The node-group-interfaces section is used to configure the MAAS - # network interfaces. Basic configuration is supported, such as which - # device should be bound, the range of IP addresses, etc. - # Note: this may contain the special identifiers: - # ${maas_net} - the first 3 octets of the ipv4 address - # ${maas_ip} - the ip address of the MAAS controller - node_group_ifaces: - - device: eth0 - ip: 10.5.1.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.5.1.255 - router_ip: 10.5.1.1 - static_range: - low: 10.5.1.50 - high: 10.5.1.80 - dynamic_range: - low: 10.5.1.81 - high: 10.5.1.250 - - device: eth1 - ip: 10.5.12.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.5.12.255 - management: 1 - static_range: - low: 10.5.12.20 - high: 10.5.12.150 - dynamic_range: - low: 10.5.12.151 - high: 10.5.12.200 - - device: eth2 - ip: 10.5.15.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.5.15.255 - router_ip: 10.5.15.254 - management: 1 - static_range: - low: 10.5.15.20 - high: 10.5.15.150 - dynamic_range: - low: 10.5.15.151 - high: 10.5.15.200 - - # Defines the physical nodes which are added to the MAAS cluster - # controller upon startup of the node. - nodes: - - name: node1-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:cf:bb:54" - power: - type: ipmi - address: 10.2.117.81 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 -# - - name: node2-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:cf:b8:93" - power: - type: ipmi - address: 10.2.117.82 - user: root - pass: root - driver: LAN_2_0 - - - name: node3-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:08:7f" - power: - type: ipmi - address: 10.2.117.83 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node4-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:08:b1" - power: - type: ipmi - address: 10.2.117.84 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node5-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:0a:4b" - power: - type: ipmi - address: 10.2.117.85 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - -# - name: jenkins-slave -# tags: jenkins-slave -# architecture: amd64/generic -# mac_addresses: -# - "52:54:00:f0:5c:53" -# power: -# type: virsh -# address: qemu+ssh://ubuntu@10.4.1.1/system - - # Contains the virtual machine parameters for creating the Juju bootstrap - # node virtual machine - juju-bootstrap: - name: bootstrap - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 120G diff --git a/ci/maas/intel/pod5/environments.yaml b/ci/maas/intel/pod5/environments.yaml deleted file mode 100644 index d138e53d..00000000 --- a/ci/maas/intel/pod5/environments.yaml +++ /dev/null @@ -1,40 +0,0 @@ -default: demo-maas - -environments: - - # https://juju.ubuntu.com/docs/config-maas.html - demo-maas: - type: maas - - # maas-server specifies the location of the MAAS server. It must - # specify the base path. - # - maas-server: 'http://10.4.1.2/MAAS' - - # maas-oauth holds the OAuth credentials from MAAS. - # - maas-oauth: 'HyacKVwxBVE9xwmJW7:CVwUpERLN3fDUbkUra:ETW88KVJxDHQA3kqmZgghUQnzanSFwH4' - - # maas-server bootstrap ssh connection options - # - - # bootstrap-timeout time to wait contacting a state server, in seconds. - bootstrap-timeout: 1800 - - # Whether or not to refresh the list of available updates for an - # OS. The default option of true is recommended for use in - # production systems, but disabling this can speed up local - # deployments for development or testing. - # - enable-os-refresh-update: false - - # Whether or not to perform OS upgrades when machines are - # provisioned. The default option of true is recommended for use - # in production systems, but disabling this can speed up local - # deployments for development or testing. - # - enable-os-upgrade: false - - - admin-secret: admin - default-series: trusty diff --git a/ci/maas/intel/pod6/deployment.yaml b/ci/maas/intel/pod6/deployment.yaml deleted file mode 100755 index 409a7ae2..00000000 --- a/ci/maas/intel/pod6/deployment.yaml +++ /dev/null @@ -1,260 +0,0 @@ -# This file defines the deployment for the MAAS environment which is to be -# deployed and automated. -demo-maas: - maas: - # Defines the general setup for the MAAS environment, including the - # username and password for the host as well as the MAAS server. - user: ubuntu - password: ubuntu - - # Contains the virtual machine parameters for creating the MAAS virtual - # server. Here you can configure the name of the virsh domain, the - # parameters for how the network is attached. - name: opnfv-maas-intel - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 160G - release: trusty - - # Apt http proxy setting(s) - apt_http_proxy: - - apt_sources: - - ppa:maas/stable - - ppa:juju/stable - - boot_source: - url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ - keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg - exclusive: true - selections: - 1: - release: trusty - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - 2: - release: xenial - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - - # Virsh power settings - # Specifies the uri and keys to use for virsh power control of the - # juju virtual machine. If the uri is omitted, the value for the - # --remote is used. If no power settings are desired, then do not - # supply the virsh block. - virsh: - rsa_priv_key: /home/ubuntu/.ssh/id_rsa - rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://jenkins@10.6.1.1/system - - # Defines the IP Address that the configuration script will use to - # to access the MAAS controller via SSH. - ip_address: 10.6.1.2 - - # This section allows the user to set a series of options on the - # MAAS server itself. The list of config options can be found in - # the upstream MAAS documentation: - # - http://maas.ubuntu.com/docs/api.html#maas-server - settings: - main_archive: http://us.archive.ubuntu.com/ubuntu - upstream_dns: 8.8.8.8 - maas_name: intelpod6 - # kernel_opts: "console=tty0 console=ttyS1,115200n8" - # ntp_server: ntp.ubuntu.com - - # This section is used to define the networking parameters for when - # the node first comes up. It is fed into the meta-data cloud-init - # configuration and is used to configure the networking piece of the - # service. The contents of this section are written directly to the - # /etc/network/interfaces file. - # - # Please note, this is slightly different than the - # node-group-interfaces section below. This will configure the - # machine's networking params, and the node-group-interfaces will - # configure the maas node-group interfaces which is used for - # controlling the dhcp, dns, etc. - network_config: | - auto lo - iface lo inet loopback - - auto eth0 - iface eth0 inet static - address 10.6.1.2 - netmask 255.255.255.0 - network 10.6.1.0 - broadcast 10.6.1.255 - gateway 10.6.1.1 - dns-nameservers 8.8.8.8 10.6.1.2 127.0.0.1 - - auto eth1 - iface eth1 inet static - address 10.6.12.2 - netmask 255.255.255.0 - - auto eth2 - iface eth2 inet static - address 10.6.15.2 - netmask 255.255.255.0 - - auto eth3 - iface eth3 inet static - address 10.2.117.107 - netmask 255.255.255.0 - #auto lo - #iface lo inet loopback - - #auto eth0 - #iface eth0 inet static - # address 192.168.122.2 - # netmask 255.255.248.0 - # network 192.168.122.0 - # broadcast 192.168.122.255 - # gateway 192.168.122.1 - # dns-nameservers 192.168.122.1 127.0.0.1 - - # The node-group-interfaces section is used to configure the MAAS - # network interfaces. Basic configuration is supported, such as which - # device should be bound, the range of IP addresses, etc. - # Note: this may contain the special identifiers: - # ${maas_net} - the first 3 octets of the ipv4 address - # ${maas_ip} - the ip address of the MAAS controller - node_group_ifaces: - - device: eth0 - ip: 10.6.1.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.6.1.255 - router_ip: 10.6.1.1 - static_range: - low: 10.6.1.50 - high: 10.6.1.80 - dynamic_range: - low: 10.6.1.81 - high: 10.6.1.250 - - device: eth1 - ip: 10.6.12.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.6.12.255 - management: 1 - static_range: - low: 10.6.12.20 - high: 10.6.12.150 - dynamic_range: - low: 10.6.12.151 - high: 10.6.12.200 - - device: eth2 - ip: 10.6.15.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.6.15.255 - router_ip: 10.6.15.254 - management: 1 - static_range: - low: 10.6.15.20 - high: 10.6.15.150 - dynamic_range: - low: 10.6.15.151 - high: 10.6.15.200 - - # Defines the physical nodes which are added to the MAAS cluster - # controller upon startup of the node. - nodes: - - name: node1-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:d8:ba:46" - power: - type: ipmi - address: 10.2.117.96 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node2-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:0b:72" - power: - type: ipmi - address: 10.2.117.97 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node3-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:09:33" - power: - type: ipmi - address: 10.2.117.98 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node4-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1e:67:e0:09:fb" - power: - type: ipmi - address: 10.2.117.99 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node5-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1e:67:cf:bc:f8" - power: - type: ipmi - address: 10.2.117.100 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - -# - name: jenkins-slave -# tags: jenkins-slave -# architecture: amd64/generic -# mac_addresses: -# - "52:54:00:f0:5c:53" -# power: -# type: virsh -# address: qemu+ssh://ubuntu@10.4.1.1/system - - # Contains the virtual machine parameters for creating the Juju bootstrap - # node virtual machine - juju-bootstrap: - name: bootstrap - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 120G diff --git a/ci/maas/intel/pod9/deployment.yaml b/ci/maas/intel/pod9/deployment.yaml deleted file mode 100755 index dcb2068b..00000000 --- a/ci/maas/intel/pod9/deployment.yaml +++ /dev/null @@ -1,230 +0,0 @@ -# This file defines the deployment for the MAAS environment which is to be -# deployed and automated. -demo-maas: - maas: - # Defines the general setup for the MAAS environment, including the - # username and password for the host as well as the MAAS server. - user: ubuntu - password: ubuntu - - # Contains the virtual machine parameters for creating the MAAS virtual - # server. Here you can configure the name of the virsh domain, the - # parameters for how the network is attached. - name: opnfv-maas-intel - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 160G - release: trusty - - # Apt http proxy setting(s) - apt_http_proxy: - - apt_sources: - - ppa:maas/stable - - ppa:juju/stable - - boot_source: - url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ - keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg - exclusive: true - selections: - 1: - release: trusty - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - 2: - release: xenial - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - - # Virsh power settings - # Specifies the uri and keys to use for virsh power control of the - # juju virtual machine. If the uri is omitted, the value for the - # --remote is used. If no power settings are desired, then do not - # supply the virsh block. - virsh: - rsa_priv_key: /home/ubuntu/.ssh/id_rsa - rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://jenkins@10.9.1.1/system - - # Defines the IP Address that the configuration script will use to - # to access the MAAS controller via SSH. - ip_address: 10.9.1.2 - - # This section allows the user to set a series of options on the - # MAAS server itself. The list of config options can be found in - # the upstream MAAS documentation: - # - http://maas.ubuntu.com/docs/api.html#maas-server - settings: - main_archive: http://us.archive.ubuntu.com/ubuntu - upstream_dns: 8.8.8.8 - maas_name: intelpod9 - # kernel_opts: "console=tty0 console=ttyS1,115200n8" - # ntp_server: ntp.ubuntu.com - - # This section is used to define the networking parameters for when - # the node first comes up. It is fed into the meta-data cloud-init - # configuration and is used to configure the networking piece of the - # service. The contents of this section are written directly to the - # /etc/network/interfaces file. - # - # Please note, this is slightly different than the - # node-group-interfaces section below. This will configure the - # machine's networking params, and the node-group-interfaces will - # configure the maas node-group interfaces which is used for - # controlling the dhcp, dns, etc. - network_config: | - auto lo - iface lo inet loopback - - auto eth0 - iface eth0 inet static - address 10.9.1.2 - netmask 255.255.255.0 - network 10.9.1.0 - broadcast 10.9.1.255 - gateway 10.9.1.1 - dns-nameservers 8.8.8.8 10.9.1.2 127.0.0.1 - - auto eth1 - iface eth1 inet static - address 10.9.12.2 - netmask 255.255.255.0 - - auto eth2 - iface eth2 inet static - address 10.9.15.2 - netmask 255.255.255.0 - - auto eth3 - iface eth3 inet static - address 10.2.117.143 - netmask 255.255.255.0 - #auto lo - #iface lo inet loopback - - #auto eth0 - #iface eth0 inet static - # address 192.168.122.2 - # netmask 255.255.248.0 - # network 192.168.122.0 - # broadcast 192.168.122.255 - # gateway 192.168.122.1 - # dns-nameservers 192.168.122.1 127.0.0.1 - - # The node-group-interfaces section is used to configure the MAAS - # network interfaces. Basic configuration is supported, such as which - # device should be bound, the range of IP addresses, etc. - # Note: this may contain the special identifiers: - # ${maas_net} - the first 3 octets of the ipv4 address - # ${maas_ip} - the ip address of the MAAS controller - node_group_ifaces: - - device: eth0 - ip: 10.9.1.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.9.1.255 - router_ip: 10.9.1.1 - static_range: - low: 10.9.1.50 - high: 10.9.1.80 - dynamic_range: - low: 10.9.1.81 - high: 10.9.1.250 - - device: eth1 - ip: 10.9.12.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.9.12.255 - management: 1 - static_range: - low: 10.9.12.20 - high: 10.9.12.150 - dynamic_range: - low: 10.9.12.151 - high: 10.9.12.200 - - device: eth2 - ip: 10.9.15.2 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.9.15.255 - router_ip: 10.9.15.254 - management: 1 - static_range: - low: 10.9.15.20 - high: 10.9.15.150 - dynamic_range: - low: 10.9.15.151 - high: 10.9.15.200 - - # Defines the physical nodes which are added to the MAAS cluster - # controller upon startup of the node. - nodes: - - name: node1-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1E:67:D4:30:38" - power: - type: ipmi - address: 10.2.117.142 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node2-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "00:1E:67:D4:33:A3" - power: - type: ipmi - address: 10.2.117.144 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - - - name: node3-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:1E:67:D4:2F:BA" - power: - type: ipmi - address: 10.2.117.146 - user: root - pass: root - driver: LAN_2_0 -# sticky_ip_address: -# mac_address: "38:63:bb:43:b8:9c" -# requested_address: 192.168.122.5 - -# - name: jenkins-slave -# tags: jenkins-slave -# architecture: amd64/generic -# mac_addresses: -# - "52:54:00:f0:5c:53" -# power: -# type: virsh -# address: qemu+ssh://ubuntu@10.4.1.1/system - - # Contains the virtual machine parameters for creating the Juju bootstrap - # node virtual machine - juju-bootstrap: - name: bootstrap - interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 120G diff --git a/labconfig/default/deployment.yaml b/labconfig/default/deployment.yaml new file mode 100644 index 00000000..dacd5879 --- /dev/null +++ b/labconfig/default/deployment.yaml @@ -0,0 +1,147 @@ +# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=virbr0,model=virtio'] + memory: 2048 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 20G +# sticky_ip_address: +# requested_address: 192.168.122.25 + + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: opnfv-maas + interfaces: ['bridge=virbr0,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 60G + release: trusty + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + boot_source: + url: http://maas.ubuntu.com/images/ephemeral-v2/releases/ + keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg + selections: + 1: + release: xenial + os: ubuntu + arches: amd64 + subarches: "*" + labels: release + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://ubuntu@192.168.122.1/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 192.168.122.2 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://us.archive.ubuntu.com/ubuntu + upstream_dns: 192.168.122.1 + maas_name: automaas + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 192.168.122.2 + netmask 255.255.255.0 + network 192.168.122.0 + broadcast 192.168.122.255 + gateway 192.168.122.1 + dns-nameservers 192.168.122.1 127.0.0.1 + + # See https://maas.ubuntu.com/docs/maascli.html#node-groups for + # description and full list of supported options. + # NOTE: interfaces are added using the node_group_interfaces section + # and only one node_group can be created by this bundle. + # Additional node groups can be added post deployment. + #node_group: + # # This is the cluster DNS name. + # name: maas + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 192.168.122.2 + subnet_mask: 255.255.255.0 + broadcast_ip: 192.168.122.255 + router_ip: 192.168.122.1 + static_range: + low: 192.168.122.101 + high: 192.168.122.200 + dynamic_range: + low: 192.168.122.25 + high: 192.168.122.100 + + # Physical nodes to be added to the MAAS cluster. Nodes will be + # configured, commissioned and put into the Ready state so + # they are ready to be deployed to. + #nodes: + # - name: node1 + # tags: api + # architecture: amd64/generic + # mac_addresses: + # - "38:63:bb:43:b8:9c" + # power: + # type: ipmi + # address: 10.0.1.1 + # user: maas + # pass: passw0rd + # driver: LAN_2_0 + # sticky_ip_address: + # mac_address: "38:63:bb:43:b8:9c" + # requested_address: 192.168.122.6 + diff --git a/labconfig/default/labconfig.yaml b/labconfig/default/labconfig.yaml index 857237aa..dacd5879 100644 --- a/labconfig/default/labconfig.yaml +++ b/labconfig/default/labconfig.yaml @@ -40,23 +40,15 @@ demo-maas: - ppa:juju/stable boot_source: - url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ + url: http://maas.ubuntu.com/images/ephemeral-v2/releases/ keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg - exclusive: true selections: 1: - release: trusty - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - 2: release: xenial os: ubuntu arches: amd64 subarches: "*" - labels: daily - + labels: release # Virsh power settings # Specifies the uri and keys to use for virsh power control of the # juju virtual machine. If the uri is omitted, the value for the diff --git a/labconfig/intel/pod5/labconfig.yaml b/labconfig/intel/pod5/labconfig.yaml index ce1688c6..a2d1cadd 100644 --- a/labconfig/intel/pod5/labconfig.yaml +++ b/labconfig/intel/pod5/labconfig.yaml @@ -24,7 +24,7 @@ labconfig: - type: control architecture: x86_64 pxe_mac_address: - - "00:1e:67:d8:ba:46" + - "00:1e:67:cf:bb:54" power: type: ipmi address: 10.2.117.81 @@ -33,7 +33,7 @@ labconfig: - type: control architecture: x86_64 pxe_mac_address: - - "00:1e:67:e0:0b:72" + - "00:1e:67:cf:b8:93" power: type: ipmi address: 10.2.117.82 -- cgit 1.2.3-korg