.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)

============================
Network Topology After Setup
============================

*****************************
Post-Install Network Topology
*****************************

The network topology after setting up service VM as IPv6 vRouter is shown as follows :numref:`postinstall-figure1`:

.. figure:: images/ipv6-postinstall-topology.png
   :name: postinstall-figure1
   :width: 100%

   Post-Install Network Topology

********************************************************
Sample Network Topology of this Setup through Horizon UI
********************************************************

The sample network topology of the setup will be shown in Horizon UI as follows :numref:`setup-figure1`:

.. figure:: images/ipv6-sample-in-horizon.png
   :name: setup-figure1
   :width: 100%

   Sample Network Topology in Horizon UI

*********************************************************
Sample Network Topology of this Setup through ODL DLUX UI
*********************************************************

If you set up either Scenario 2 or Scenario 3, the sample network topology of the setup
will be shown in Open Daylight DLUX UI as follows :numref:`s23-figure1`:

.. figure:: images/odl-dlux_ipv6_poc.png
   :name: s23-figure1
   :width: 100%

   Sample Network Topology in Open Daylight DLUX UI