From a8a3bf6008957c343b1562b478d1f75e072c91bc Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Mon, 28 Dec 2015 14:08:44 -0800 Subject: JIRA:IPVSIX-29 Change-Id: Ie9d1b6d1f4dc71af75b4e0d7859133f7e38846ed Signed-off-by: Bin Hu --- vrouter/setup_service_vm.txt | 198 ------------------------------------------- 1 file changed, 198 deletions(-) delete mode 100644 vrouter/setup_service_vm.txt (limited to 'vrouter/setup_service_vm.txt') diff --git a/vrouter/setup_service_vm.txt b/vrouter/setup_service_vm.txt deleted file mode 100644 index a9c0a87..0000000 --- a/vrouter/setup_service_vm.txt +++ /dev/null @@ -1,198 +0,0 @@ -================================================ -Set up a Service VM Running as a vRouter (SLAAC) -================================================ - -| # Current network setup for IPv6 router VM on local virtualbox setup -| # /etc/sysconfig/network-scripts/ifcfg-enp0s3 -| # Network interface enp0s3 is IPv4 for public internet access -| TYPE="Ethernet" -| BOOTPROTO="dhcp" -| DEFROUTE="yes" -| PEERDNS="yes" -| PEERROUTES="yes" -| IPV4_FAILURE_FATAL="no" -| IPV6INIT="yes" -| IPV6_AUTOCONF="yes" -| IPV6_DEFROUTE="yes" -| IPV6_PEERDNS="yes" -| IPV6_PEERROUTES="yes" -| IPV6_FAILURE_FATAL="no" -| NAME="enp0s3" -| UUID="32bad876-680a-4f78-a364-726eae21bfcf" -| DEVICE="enp0s3" -| ONBOOT="yes" - -| # /etc/sysconfig/network-scripts/ifcfg-enp0s8 -| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts -| BOOTPROTO=static -| IPV6INIT=yes -| IPV6ADDR="2001:db8:0:2::1/64" -| NAME=enp0s8 -| UUID=e931a806-2f76-425d-b035-d37813b81df5 -| DEVICE=enp0s8 -| ONBOOT=yes -| NM_CONTROLLED=no - -| # Disable NetworkManager -| systemctl disable NetworkManager - -| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed -| yum install dhcp-common -| yum install dhcp -| yum install radvd - -| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding -| net.ipv6.conf.all.forwarding=1 -| net.ipv6.conf.enp0s3.accept_ra=2 -| net.ipv6.conf.enp0s3.accept_ra_defrtr=1 -| net.ipv6.conf.enp0s3.router_solicitations=1 - -| # /etc/radvd.conf -| interface enp0s8 -| { -| # This is the primary "on switch" for RADVD -| AdvSendAdvert on; -| # -| # These settings determine how often advertisements will be sent every X-Y. -| # X and Y are in seconds. -| # With these settings you will be sending a advert every 60 seconds -| # -| MinRtrAdvInterval 60; -| MaxRtrAdvInterval 180; -| # -| # Disable Mobile IPv6 support -| # -| AdvHomeAgentFlag off; -| # -| # Here we set our managed flags -| # -| AdvManagedFlag on; -| AdvOtherConfigFlag on; -| # -| # Enter our IPv6 prefix and CIDR -| # -| prefix 2001:db8:0:2::/64 -| { -| AdvOnLink on; -| # On link tells the host that the default router is on the same "link" as it is -| AdvAutonomous on; -| AdvRouterAddr off; -| }; -| }; - -# Enable radvd service -systemctl enable radvd - -# In /etc/sysconfig/network add -IPV6FORWARDING=yes - -================================================================= -Set up a Service VM Running as a vRouter (DHCPv6 Stateful Server) -================================================================= - -| # Current network setup for IPv6 router VM on local virtualbox setup -| # /etc/sysconfig/network-scripts/ifcfg-enp0s3 -| # Network interface enp0s3 is IPv4 for public internet access -| TYPE="Ethernet" -| BOOTPROTO="dhcp" -| DEFROUTE="yes" -| PEERDNS="yes" -| PEERROUTES="yes" -| IPV4_FAILURE_FATAL="no" -| IPV6INIT="yes" -| IPV6_AUTOCONF="yes" -| IPV6_DEFROUTE="yes" -| IPV6_PEERDNS="yes" -| IPV6_PEERROUTES="yes" -| IPV6_FAILURE_FATAL="no" -| NAME="enp0s3" -| UUID="32bad876-680a-4f78-a364-726eae21bfcf" -| DEVICE="enp0s3" -| ONBOOT="yes" - -| # /etc/sysconfig/network-scripts/ifcfg-enp0s8 -| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts -| BOOTPROTO=static -| IPV6INIT=yes -| IPV6ADDR="2001:db8:0:2::1/64" -| NAME=enp0s8 -| UUID=e931a806-2f76-425d-b035-d37813b81df5 -| DEVICE=enp0s8 -| ONBOOT=yes -| NM_CONTROLLED=no - -| # Disable NetworkManager -| systemctl disable NetworkManager - -| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed -| yum install dhcp-common -| yum install dhcp -| yum install radvd - -| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding -| net.ipv6.conf.all.forwarding=1 -| net.ipv6.conf.enp0s3.accept_ra=2 -| net.ipv6.conf.enp0s3.accept_ra_defrtr=1 -| net.ipv6.conf.enp0s3.router_solicitations=1 - -| # /etc/dhcp/dhcpd6.conf -| # DHCP for IPv6 Server Configuration file. - -| # Enable RFC 5007 support (same than for DHCPv4) - allow leasequery; - -| # IPv6 address valid lifetime -| # (at the end the address is no longer usable by the client) -| # (set to 30 days, the usual IPv6 default) -| default-lease-time 2592000; - -| # IPv6 address preferred lifetime -| # (at the end the address is deprecated, i.e., the client should use -| # other addresses for new connections) -| # (set to 7 days, the usual IPv6 default) -| preferred-lifetime 604800; - -| # T1, the delay before Renew -| # (default is 1/2 preferred lifetime) -| # (set to 1 hour) -| option dhcp-renewal-time 3600; - -| # T2, the delay before Rebind (if Renews failed) -| # (default is 3/4 preferred lifetime) -| # (set to 2 hours) -| option dhcp-rebinding-time 7200; - -| # The path of the lease file -| dhcpv6-lease-file-name "/var/lib/dhcpd/dhcpd6.leases"; - -| # Set preference to 255 (maximum) in order to avoid waiting for -| # additional servers when there is only one -| option dhcp6.preference 255; - -| # Server side command to enable rapid-commit (2 packet exchange) -| option dhcp6.rapid-commit; - -| # The delay before information-request refresh -| # (minimum is 10 minutes, maximum one day, default is to not refresh) -| # (set to 6 hours) - option dhcp6.info-refresh-time 21600; - -| # Set this to `interim` when doing ddns updates -| ddns-update-style interim; -| -| subnet6 2001:db8:0:2::/64 { -| option dhcp6.name-servers 2001:db8:0:2::1; -| option dhcp6.domain-search "opnfv.local"; -| ddns-hostname = concat(binary-to-ascii(10, 8, "-", leased-address), ".wired"); -| ddns-domainname = "opnfv.local"; -| # Our address range 1000 through 1fff -| range6 2001:db8:0:2::1000 2001:db8:0:2::1fff; -| } -| -| # In /etc/sysconfig/network add -| IPV6FORWARDING=yes - -For reference, refer to `How to set up RADVd DHCPv6 and DNS on CentOS 6`_. - -.. _`How to set up RADVd DHCPv6 and DNS on CentOS 6`: http://www.percula.info/archives/196 - -- cgit 1.2.3-korg