From bcd2e6455dbdd86b52e51bdecd194d75fa09426a Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Fri, 8 Jan 2016 22:27:13 -0800 Subject: JIRA:IPVSIX-29 Change-Id: Iadb01d1dd79e1da05003bbc524040c03d20abe88 Signed-off-by: Bin Hu (cherry picked from commit 987aa5e0d106068f6c4887ba21bcd4321cb7f203) --- .../5-ipv6-configguide-scenario-1-native-os.rst | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst') diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst index 1a303cc..d222c63 100644 --- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst +++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst @@ -22,11 +22,15 @@ For exemplary purpose, we assume: Underlay Network Topology - Scenario 1 -**Please note that the IP address shown in** :numref:`s1-figure1` -**are for exemplary purpose. You need to configure your public IP -address connecting to Internet according to your actual network -infrastructure. And you need to make sure the private IP address are -not conflicting with other subnets**. +**Please note that:** + +* **the IP address shown in** :numref:`s1-figure1` **are for exemplary purpose. + You need to configure your public IP address connecting to Internet according + to your actual network infrastructure. And you need to make sure the private IP address are + not conflicting with other subnets**. +* **Although the deployment model of single controller node is assumed, in case of HA (High Availability) + deployment model where multiple controller nodes are used, there is no impact and the setup procedure + is the same.** ************ Prerequisite -- cgit 1.2.3-korg