From 9f7638f13b40cc023a50a665f4d43c57170d9c77 Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Fri, 25 Dec 2015 00:36:15 -0800 Subject: JIRA: IPVSIX-29 Change-Id: Ib15a9170fa9914e44b6369d39288e293c3997245 Signed-off-by: Bin Hu --- .../0-ipv6-configguide-prep-infra.rst | 27 ++++------------------ 1 file changed, 5 insertions(+), 22 deletions(-) (limited to 'docs/setupservicevm/0-ipv6-configguide-prep-infra.rst') diff --git a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst index 56803bf..9703991 100644 --- a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst +++ b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst @@ -1,23 +1,6 @@ -======================== -Preparing Infrastructure -======================== - -******************** -Architectural Design -******************** - -The architectural design of using a service VM as an IPv6 vRouter is -shown as follows in :numref:`s2-figure1`: - -.. figure:: images/ipv6-architecture.png - :name: s2-figure1 - :width: 100% - - Architectural Design of Using a VM as an IPv6 vRouter - -******************** +==================== Infrastructure Setup -******************** +==================== In order to set up the service VM as an IPv6 vRouter, we need to prepare 3 hosts, each of which has minimum 8GB RAM and 40GB storage. One host is used as OpenStack Controller @@ -34,15 +17,15 @@ For exemplary purpose, we assume: * We use ``opnfv`` as username to login. * We use ``devstack`` to install OpenStack Kilo. Please note that OpenStack Liberty can be used as well. -The underlay network topology of those 3 hosts are shown as follows in :numref:`s2-figure2`: +The underlay network topology of those 3 hosts are shown as follows in :numref:`s2-figure1`: .. figure:: images/ipv6-topology-scenario-2.png - :name: s2-figure2 + :name: s2-figure1 :width: 100% Underlay Network Topology - Scenario 2 -**Please note that the IP address shown in** :numref:`s2-figure2` +**Please note that the IP address shown in** :numref:`s2-figure1` **are for exemplary purpose. You need to configure your public IP address connecting to Internet according to your actual network infrastructure. And you need to make sure the private IP address are -- cgit 1.2.3-korg