From d447912de3efb1eebcc8d66d68a528d6315cadb6 Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Mon, 11 Jan 2016 20:34:28 -0800 Subject: JIRA:IPVSIX-29 Change-Id: I384391fe3ebe840c5ced2bfc51c98d6734b0bb66 Signed-off-by: Bin Hu --- docs/reldoc/option-pure-os.rst | 222 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 docs/reldoc/option-pure-os.rst (limited to 'docs/reldoc/option-pure-os.rst') diff --git a/docs/reldoc/option-pure-os.rst b/docs/reldoc/option-pure-os.rst new file mode 100644 index 0000000..609b1f8 --- /dev/null +++ b/docs/reldoc/option-pure-os.rst @@ -0,0 +1,222 @@ +====================================================================== +Set Up a Service VM as an IPv6 vRouter in Native OpenStack Environment +====================================================================== + +If you intend to set up a service VM as an IPv6 vRouter in native OpenStack environment of +OPNFV Brahmaputra Release base platform, the instructions are as follows. + +Please **NOTE** that: + +* Because the anti-spoofing rules of Security Group feature in OpenStack prevents + a VM from forwarding packets, we need to disable Security Group feature in the + native OpenStack environment. +* The hostnames, IP addresses, and username are for exemplary purpose in instructions. + Please change as needed to fit your environment. +* The instructions apply to both deployment model of single controller node and + HA (High Availability) deployment model where multiple controller nodes are used + +***************************** +Install OPNFV and Preparation +***************************** + +**OPNFV-NATIVE-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release: + +.. code-block:: bash + + deploy --scenario os_ha + +**OPNFV-NATIVE-INSTALL-2**: Clone the following GitHub repository to get the +configuration and metadata files + +.. code-block:: bash + + git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc + +********************************************** +Disable Security Groups in OpenStack ML2 Setup +********************************************** + +**OPNFV-NATIVE-SEC-1**: Change the settings in +``/etc/neutron/plugins/ml2/ml2_conf.ini`` as follows + +.. code-block:: bash + + # /etc/neutron/plugins/ml2/ml2_conf.ini + [securitygroup] + enable_security_group = False + firewall_driver = neutron.agent.firewall.NoopFirewallDriver + +**OPNFV-NATIVE-SEC-2**: Change the settings in ``/etc/nova/nova.conf`` as follows + +.. code-block:: bash + + # /etc/nova/nova.conf + [DEFAULT] + security_group_api = nova + firewall_driver = nova.virt.firewall.NoopFirewallDriver + +********************************* +Set Up Service VM as IPv6 vRouter +********************************* + +**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following +commands should be executed: + +.. code-block:: bash + + source openrc admin demo + +**OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` + +.. code-block:: bash + + wget https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2 + +**OPNFV-NATIVE-SETUP-3**: Import Fedora22 image to ``glance`` + +.. code-block:: bash + + glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 + +**OPNFV-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` +which need to provide external connectivity. + +.. code-block:: bash + + neutron router-create ipv4-router + neutron router-create ipv6-router + +**OPNFV-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using +the appropriate values based on the data-center physical network setup. + +.. code-block:: bash + + neutron net-create --router:external ext-net + +**OPNFV-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and +``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. + +Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command +below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**. + +.. code-block:: bash + + sudo ip addr del 198.59.156.113/24 dev eth1 + sudo ovs-vsctl add-port br-ex eth1 + sudo ifconfig eth1 up + sudo ip addr add 198.59.156.113/24 dev br-ex + sudo ifconfig br-ex up + sudo ip route add default via 198.59.156.1 dev br-ex + neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 + +**OPNFV-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, +and that the default route is on ``br-ex`` + +.. code-block:: bash + + $ ip a s br-ex + 38: br-ex: mtu 1430 qdisc noqueue state UNKNOWN group default + link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff + inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex + valid_lft forever preferred_lft forever + inet6 fe80::543e:28ff:fe70:4426/64 scope link + valid_lft forever preferred_lft forever + $ + $ ip route + default via 198.59.156.1 dev br-ex + 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10 + 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 + 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113 + +Please note that the IP addresses above are exemplary purpose. + +**OPNFV-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and +``ipv6-int-network2`` with port_security disabled + +.. code-block:: bash + + neutron net-create --port_security_enabled=False ipv4-int-network1 + neutron net-create --port_security_enabled=False ipv6-int-network2 + +**OPNFV-NATIVE-SETUP-9**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network +``ipv4-int-network1``, and associate it to ``ipv4-router``. + +.. code-block:: bash + + neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24 + neutron router-interface-add ipv4-router ipv4-int-subnet1 + +**OPNFV-NATIVE-SETUP-10**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router`` +and ``ipv6-router``. + +.. code-block:: bash + + neutron router-gateway-set ipv4-router ext-net + neutron router-gateway-set ipv6-router ext-net + +**OPNFV-NATIVE-SETUP-11**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and +one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to +``ipv6-router`` + +.. code-block:: bash + + neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv6-int-network2 10.0.0.0/24 + neutron subnet-create --name ipv6-int-subnet2 --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-int-network2 2001:db8:0:1::/64 + neutron router-interface-add ipv6-router ipv4-int-subnet2 + neutron router-interface-add ipv6-router ipv6-int-subnet2 + +**OPNFV-NATIVE-SETUP-12**: Create a keypair + +.. code-block:: bash + + nova keypair-add vRouterKey > ~/vRouterKey + +**OPNFV-NATIVE-SETUP-13**: Create ports for vRouter (with some specific MAC address +- basically for automation - to know the IPv6 addresses that would be assigned to the port). + +.. code-block:: bash + + neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2 + neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1 + +**OPNFV-NATIVE-SETUP-14**: Create ports for VM1 and VM2. + +.. code-block:: bash + + neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1 + neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1 + +**OPNFV-NATIVE-SETUP-15**: Update ``ipv6-router`` with routing information to subnet +``2001:db8:0:2::/64`` + +.. code-block:: bash + + neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111 + +**OPNFV-NATIVE-SETUP-16**: Boot Service VM (``vRouter``), VM1 and VM2 + +.. code-block:: bash + + nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter + nova list + nova console-log vRouter #Please wait for some 10 to 15 minutes so that necessary packages (like radvd) are installed and vRouter is up. + nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1 + nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2 + nova list # Verify that all the VMs are in ACTIVE state. + +**OPNFV-NATIVE-SETUP-17**: If all goes well, the IPv6 addresses assigned to the VMs +would be as shown as follows: + +.. code-block:: bash + + vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64 + vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64 + VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 + VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 + +**OPNFV-NATIVE-SETUP-18**: To ``SSH`` to vRouter, you can execute the following command. + +.. code-block:: bash + + sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111 + -- cgit 1.2.3-korg