From 548ea944d0c065a687410e8bf7156e64d38f5755 Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Wed, 16 Dec 2015 15:55:32 -0800 Subject: JIRA: IPVSIX-29 Change-Id: Ib13c3a794d5ae365f4066e5f28100026f213ff4b Signed-off-by: Bin Hu --- docs/configguide/ipv6-configguide.rst | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'docs/configguide') diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst index 4bdf5e4..7a508bd 100644 --- a/docs/configguide/ipv6-configguide.rst +++ b/docs/configguide/ipv6-configguide.rst @@ -2,7 +2,8 @@ Setting Up a Service VM as an IPv6 vRouter ========================================== -After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10 steps to set up a service VM as an IPv6 vRouter: +After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10 +steps to set up a service VM as an IPv6 vRouter: - Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_ @@ -11,7 +12,7 @@ After OPNFV Brahmaputra Release base platform has been successfully installed th - Step 2: `Start Open Stack`_ - Step 3: `Create External Network Connectivity ext-net`_ - + - Step 4: `Create IPv4 Subnet and Router with External Connectivity`_ - Step 5: `Create IPv6 Subnet and Router with External Connectivity`_ @@ -30,7 +31,8 @@ Once the setup is complete, you can go to `Next Steps`_. _`Disable odl-l3 and Enable neutron-l3-agent` ********************************************* -This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of OPNFV Brahmaputra Release. +This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of +OPNFV Brahmaputra Release. If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1. @@ -76,7 +78,8 @@ _`Prepare Image, Metadata and Keypair for Service VM` _`Boot Service VM (vRouter) and other VMs in IPv6 Subnet` ********************************************************* -# Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same IPv6 subnet for testing purpose +# Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same Ipv6 +subnet for testing purpose ************************* _`Spawn RADVD in vRouter` @@ -94,5 +97,7 @@ _`Testing to Verify Setup Complete` _`Next Steps` ************* -Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this IPv6 vRouter. +Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further +open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this +IPv6 vRouter. -- cgit 1.2.3-korg