From 363b578d1b3447934df22cc1a3a8c01163e533da Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Thu, 17 Dec 2015 21:48:17 -0800 Subject: JIRA: IPVSIX-29 Change-Id: I31d1312c112da824b4c4daefad9cdd4aa52c8454 Signed-off-by: Bin Hu --- docs/configguide/ipv6-configguide.rst | 183 +++++++++++++++++++++++++++++++--- 1 file changed, 169 insertions(+), 14 deletions(-) (limited to 'docs/configguide') diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst index 3add5c6..edfb6b1 100644 --- a/docs/configguide/ipv6-configguide.rst +++ b/docs/configguide/ipv6-configguide.rst @@ -2,28 +2,30 @@ Setting Up a Service VM as an IPv6 vRouter ========================================== -After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10 +After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 11 steps to set up a service VM as an IPv6 vRouter: - Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_ - Step 1: `Start Open Daylight`_ -- Step 2: `Start Open Stack`_ +- Step 2: `Start Open Stack on Controller Node`_ -- Step 3: `Create External Network Connectivity ext-net`_ +- Step 3: `Start Open Stack on Compute Node`_ -- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_ +- Step 4: `Create External Network Connectivity ext-net`_ -- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_ +- Step 5: `Create IPv4 Subnet and Router with External Connectivity`_ -- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_ +- Step 6: `Create IPv6 Subnet and Router with External Connectivity`_ -- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_ +- Step 7: `Prepare Image, Metadata and Keypair for Service VM`_ -- Step 8: `Spawn RADVD in vRouter`_ +- Step 8: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_ -- Step 9: `Testing to Verify Setup Complete`_ +- Step 9: `Spawn RADVD in vRouter`_ + +- Step 10: `Testing to Verify Setup Complete`_ Once the setup is complete, you can go to `Next Steps`_. @@ -42,13 +44,166 @@ If you have chosen to enable neutron-l3-agent during installation, please skip t _`Start Open Daylight` ********************** -# Place holder for instructions of how to start Open Daylight +ODL-1: Login to Open Daylight Controller Node. For the purpose of example, we use ``opnfv`` as username of login, and +``opnfv-odl-controller`` as hostname of the Open Daylight Controller Node. + +ODL-2: Start a new terminal session, and change directory to where Open Daylight is installed. Here we use ``odl`` +directory name and ``Lithium SR2`` installation as an example. + + ``cd ~/odl/distribution-karaf-0.3.2-Lithium-SR2/bin`` + +ODL-3: Run the ``karaf`` shell: + + ``./karaf`` + +ODL-4: You are now in the Karaf shell of Open Daylight. To explore the list of available features you can execute +``feature:list``. In order to enable Open Daylight with Open Stack, you have to load the ``odl-ovsdb-openstack`` +feature. + + ``opendaylight-user@opnfv>feature:install odl-ovsdb-openstack`` + +ODL-5: Verify that OVSDB feature is installed successfully. + +| ``opendaylight-user@opnfv>feature:list -i | grep ovsdb`` +| odl-ovsdb-openstack | 1.1.1-Lithium-SR1 | x | ovsdb-1.1.1-Lithium-SR1 | OpenDaylight :: OVSDB :: OpenStack Network Virtual +| odl-ovsdb-southbound-api | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: api +| odl-ovsdb-southbound-impl | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: impl +| odl-ovsdb-southbound-impl-rest|1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: REST +| odl-ovsdb-southbound-impl-ui | 1.1.1-Lithium-SR1| x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: UI +| ``opendaylight-user@opnfv>`` + +ODL-6: To view the logs, you can use the following commands (or alternately the file data/log/karaf.log). + +| ``opendaylight-user@opnfv>log:display`` +| ``opendaylight-user@opnfv>log:tail`` + +ODL-7: To enable ODL DLUX UI, install the following features. Then you can navigate to http://localhost:8181/index.html +for DLUX UI. The default user-name and password is admin/admin. + + ``opendaylight-user@opnfv>feature:install odl-restconf odl-l2switch-switch odl-mdsal-apidocs odl-dlux-core`` + +ODL-8: To exit out of screen session, please use the command ``CTRL+a`` followed by ``d`` + +**Note: Do not kill the screen session, it will terminate the ODL controller.** + +At this moment, Open Daylight has been started successfully. + +************************************** +_`Start Open Stack on Controller Node` +************************************** + +OS-N-1: Login to Open Stack Controller Node. For the purpose of example, we use ``opnfv`` as username of login, and +``opnfv-os-controller`` as hostname of the Open Stack Controller Node. + +OS-N-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ``devstack`` directory +name as an example. + + ``cd ~/devstack`` + +OS-N-3: Create a ``local.conf`` file with the contents from the following URL. + + ``http://fpaste.org/276949/39476214/`` + +Note 1: You need to change the value of ``BRANCH``, and all appearance of ``stable/kilo`` and related URL to point to +the actual branch of your upstream repository. + +Note 2: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address of Open Daylight +Controller. + +Note 3: You may have to change the value of ``ODL_PROVIDER_MAPPINGS`` and ``PUBLIC_INTERFACE`` to match your actual +network interfaces. + +OS-N-4: Initiate Openstack setup by invoking ``stack.sh`` + + ``./stack.sh`` + +OS-N-5: If the setup is successful you would see the following logs on the console. Please note that the IP addresses +are all for the purpose of example. Your IP addresses will match the ones assigned during the installation of OPNFV B +Release base platform in prior chapters. + +| ``This is your host ip: 198.59.156.113`` +| ``Horizon is now available at http://198.59.156.113/`` +| ``Keystone is serving at http://198.59.156.113:5000/`` +| ``The default users are: admin and demo`` +| ``The password: password`` + +OS-N-6: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf`` to lock the +codebase. Devstack uses these configuration parameters to determine if it has to run with the existing codebase or +update to the latest copy. + +OS-N-7: Source the credentials. + +| ``opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo`` + +OS-N-8: Verify some commands to check if setup is working fine. + +| ``opnfv@opnfv-os-controller:~/devstack$ nova flavor-list`` +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ +| | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ +| | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | +| | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | +| | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | +| | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | +| | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + +Now you can start the Compute node setup. + +*********************************** +_`Start Open Stack on Compute Node` +*********************************** + +OS-M-1: Login to Open Stack Compute Node. For the purpose of example, we use ``opnfv`` as username of login, and +``opnfv-os-compute`` as hostname of the Open Stack Compute Node. + +OS-M-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ``devstack`` +directory name as an example. + + ``cd ~/devstack`` + +OS-M-3: Create a ``local.conf`` file with the contents from the following URL. + + ``http://fpaste.org/276958/44395955/`` + +Note 1: You need to change the value of ``BRANCH``, and all appearance of ``stable/kilo`` and related URL to point to +the actual branch of your upstream repository. + +Note 2: you need to change the IP address of ``SERVICE_HOST`` to point to your actual IP address of Open Stack +Controller. + +Note 3: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address of Open Daylight +Controller. + +Note 4: You may have to change the value of ``ODL_PROVIDER_MAPPINGS`` and ``PUBLIC_INTERFACE`` to match your actual +network interface. + +OS-M-4: Initiate Openstack setup by invoking ``stack.sh`` + + ``./stack.sh`` + +OS-M-5: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf`` to lock the +codebase. Devstack uses these configuration parameters to determine if it has to run with the existing codebase or +update to the latest copy. + +OS-M-6: Source the credentials. + +| ``opnfv@opnfv-os-compute:~/devstack$ source openrc admin demo`` + +OS-M-7:Verify some commands to check if setup is working fine. -******************* -_`Start Open Stack` -******************* +| ``opnfv@opnfv-os-compute:~/devstack$ nova flavor-list`` +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ +| | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ +| | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | +| | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | +| | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | +| | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | +| | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | +| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ -# Place holder for instructions of how to start Open Stack +Now you can start to set up the service VM as an Ipv6 vRouter in the environment of Open Stack and Open Daylight. *********************************************** _`Create External Network Connectivity ext-net` -- cgit 1.2.3-korg