summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst14
1 files changed, 14 insertions, 0 deletions
diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
index d042687..4a033ef 100644
--- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
+++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
@@ -110,9 +110,19 @@ connectivity.
**SCENARIO-3-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
data-center physical network setup.
+Please **NOTE** that if you use a different installer, i.e. NOT ``devstack``, your installer
+may have already created an external network during installation. Under this circumstance,
+you may only need to create the subnet of ``ext-net``. When you create the subnet, you must
+use the same name of external network that your installer creates.
+
.. code-block:: bash
+ # If you use a different installer and it has already created an external work,
+ # Please skip this command "net-create"
neutron net-create --router:external ext-net
+
+ # If you use a different installer and it has already created an external work,
+ # Change the name "ext-net" to match the name of external network that your installer has created
neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
**SCENARIO-3-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2``
@@ -135,6 +145,8 @@ and associate it to ``ipv4-router``.
.. code-block:: bash
+ # If you use a different installer and it has already created an external work,
+ # Change the name "ext-net" to match the name of external network that your installer has created
neutron router-gateway-set ipv4-router ext-net
neutron router-gateway-set ipv6-router ext-net
@@ -200,6 +212,8 @@ to know the IPv6 addresses that would be assigned to the port).
.. code-block:: bash
# 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed).
+ # If you use a different installer and it has already created an external work,
+ # Change the name "ext-net" to match the name of external network that your installer has created
neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \
awk '{print $2}') ext-net
neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \