summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorBin Hu <bh526r@att.com>2016-02-04 15:50:52 -0800
committerBin Hu <bh526r@att.com>2016-02-04 23:52:47 +0000
commit145dc7d1402926502329ae84d4b1f647a8e5bf18 (patch)
tree3af9bcafdd810c8f7ffab8e5cd72ff20361d561a /docs
parentc8ed3ece1e0cbd8fd094e7c2b257a070d4b2d92a (diff)
JIRA:IPVSIX-29 pdf table
Change-Id: I3cc7e8d5b6e528f0b854c1ee343092e966b4adec Signed-off-by: Bin Hu <bh526r@att.com> (cherry picked from commit 3c4f23e2afc974fc41dce5ca817594ceb3fef46f)
Diffstat (limited to 'docs')
-rw-r--r--docs/gapanalysis/gap-analysis-openstack-kilo.rst255
1 files changed, 153 insertions, 102 deletions
diff --git a/docs/gapanalysis/gap-analysis-openstack-kilo.rst b/docs/gapanalysis/gap-analysis-openstack-kilo.rst
index efb0aab..dea09ba 100644
--- a/docs/gapanalysis/gap-analysis-openstack-kilo.rst
+++ b/docs/gapanalysis/gap-analysis-openstack-kilo.rst
@@ -10,105 +10,156 @@ requirements of VIM-agnostic IPv6 functionality, including infrastructure layer
.. table::
:class: longtable
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Use Case / Requirement |Supported in Kilo Neutron|Notes |
-+===========================================================+=========================+====================================================================+
-|All topologies work in a multi-tenant environment |Yes |The IPv6 design is following the Neutron tenant networks model; |
-| | |dnsmasq is being used inside DHCP network namespaces, while radvd |
-| | |is being used inside Neutron routers namespaces to provide full |
-| | |isolation between tenants. Tenant isolation can be based on VLANs, |
-| | |GRE, or VXLAN encapsulation. In case of overlays, the transport |
-| | |network (and VTEPs) must be IPv4 based as of today. |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|IPv6 VM to VM only |Yes |It is possible to assign IPv6-only addresses to VMs. Both switching |
-| | |(within VMs on the same tenant network) as well as east/west routing|
-| | |(between different networks of the same tenant) are supported. |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|IPv6 external L2 VLAN directly attached to a VM |Yes |IPv6 provider network model; RA messages from upstream (external) |
-| | |router are forwarded into the VMs |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|IPv6 subnet routed via L3 agent to an external IPv6 network| |Configuration is enhanced in Kilo to allow easier setup of the |
-| |1. Yes |upstream gateway, without the user forced to create an IPv6 subnet |
-|1. Both VLAN and overlay (e.g. GRE, VXLAN) subnet attached | |for the external network. |
-| to VMs; | | |
-|2. Must be able to support multiple L3 agents for a given |2. Yes | |
-| external network to support scaling (neutron scheduler | | |
-| to assign vRouters to the L3 agents) | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Ability for a NIC to support both IPv4 and IPv6 (dual | |Dual-stack is supported in Neutron with the addition of |
-|stack) address. | |``Multiple IPv6 Prefixes`` Blueprint |
-| | | |
-|1. VM with a single interface associated with a network, |1. Yes | |
-| which is then associated with two subnets. | | |
-|2. VM with two different interfaces associated with two |2. Yes | |
-| different networks and two different subnets. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Support IPv6 Address assignment modes. |1. Yes | |
-| | | |
-|1. SLAAC |2. Yes | |
-|2. DHCPv6 Stateless | | |
-|3. DHCPv6 Stateful |3. Yes | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Ability to create a port on an IPv6 DHCPv6 Stateful subnet |Yes | |
-|and assign a specific IPv6 address to the port and have it | | |
-|taken out of the DHCP address pool. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Ability to create a port with fixed_ip for a |**No** |The following patch disables this operation: |
-|SLAAC/DHCPv6-Stateless Subnet. | |https://review.openstack.org/#/c/129144/ |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Support for private IPv6 to external IPv6 floating IP; |**Rejected** |Blueprint proposed in upstream and got rejected. General expectation|
-|Ability to specify floating IPs via Neutron API (REST and | |is to avoid NAT with IPv6 by assigning GUA to tenant VMs. See |
-|CLI) as well as via Horizon, including combination of | |https://review.openstack.org/#/c/139731/ for discussion. |
-|IPv6/IPv4 and IPv4/IPv6 floating IPs if implemented. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Provide IPv6/IPv4 feature parity in support for |**To-Do** |The L3 configuration should be transparent for the SR-IOV |
-|pass-through capabilities (e.g., SR-IOV). | |implementation. SR-IOV networking support introduced in Juno based |
-| | |on the ``sriovnicswitch`` ML2 driver is expected to work with IPv4 |
-| | |and IPv6 enabled VMs. We need to verify if it works or not |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Additional IPv6 extensions, for example: IPSEC, IPv6 |**No** |It does not appear to be considered yet (lack of clear requirements)|
-|Anycast, Multicast | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|VM access to the meta-data server to obtain user data, SSH |**No** |This is currently not supported. Config-drive or dual-stack IPv4 / |
-|keys, etc. using cloud-init with IPv6 only interfaces. | |IPv6 can be used as a workaround (so that the IPv4 network is used |
-| | |to obtain connectivity with the metadata service) |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Full support for IPv6 matching (i.e., IPv6, ICMPv6, TCP, |Yes | |
-|UDP) in security groups. Ability to control and manage all | | |
-|IPv6 security group capabilities via Neutron/Nova API (REST| | |
-|and CLI) as well as via Horizon. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|During network/subnet/router create, there should be an |Yes |Two new Subnet attributes were introduced to control IPv6 address |
-|option to allow user to specify the type of address | |assignment options: |
-|management they would like. This includes all options | | |
-|including those low priority if implemented (e.g., toggle | |* ``ipv6-ra-mode``: to determine who sends Router Advertisements; |
-|on/off router and address prefix advertisements); It must | | |
-|be supported via Neutron API (REST and CLI) as well as via | |* ``ipv6-address-mode``: to determine how VM obtains IPv6 address, |
-|Horizon | | default gateway, and/or optional information. |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Security groups anti-spoofing: Prevent VM from using a |Yes | |
-|source IPv6/MAC address which is not assigned to the VM | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Protect tenant and provider network from rough RAs |Yes |When using a tenant network, Neutron is going to automatically |
-| | |handle the filter rules to allow connectivity of RAs to the VMs only|
-| | |from the Neutron router port; with provider networks, users are |
-| | |required to specify the LLA of the upstream router during the subnet|
-| | |creation, or otherwise manually edit the security-groups rules to |
-| | |allow incoming traffic from this specific address. |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Support the ability to assign multiple IPv6 addresses to |Yes | |
-|an interface; both for Neutron router interfaces and VM | | |
-|interfaces. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Ability for a VM to support a mix of multiple IPv4 and IPv6|Yes | |
-|networks, including multiples of the same type. | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Support for IPv6 Prefix Delegation. |**Roadmap** |Some partial support is available in Liberty release |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|Distributed Virtual Routing (DVR) support for IPv6 |**No** |Blueprint proposed upstream, pending discussion. |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|IPv6 First-Hop Security, IPv6 ND spoofing. |**Roadmap** |Supported in Liberty release |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
-|IPv6 support in Neutron Layer3 High Availability |Yes | |
-|(keepalived+VRRP). | | |
-+-----------------------------------------------------------+-------------------------+--------------------------------------------------------------------+
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Use Case / Requirement |Supported in Neutron |Notes |
+ +=====================================+=========================+=================================+
+ |All topologies work in a multi-tenant|Yes |The IPv6 design is following the |
+ |environment | |Neutron tenant networks model; |
+ | | |dnsmasq is being used inside DHCP|
+ | | |network namespaces, while radvd |
+ | | |is being used inside Neutron |
+ | | |routers namespaces to provide |
+ | | |full isolation between tenants. |
+ | | |Tenant isolation can be based on |
+ | | |VLANs, GRE, or VXLAN |
+ | | |encapsulation. In case of |
+ | | |overlays, the transport network |
+ | | |(and VTEPs) must be IPv4 based as|
+ | | |of today. |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |IPv6 VM to VM only |Yes |It is possible to assign IPv6- |
+ | | |only addresses to VMs. Both |
+ | | |switching (within VMs on the same|
+ | | |tenant network) as well as east/ |
+ | | |west routing (between different |
+ | | |networks of the same tenant) are |
+ | | |supported. |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |IPv6 external L2 VLAN directly |Yes |IPv6 provider network model; RA |
+ |attached to a VM | |messages from upstream (external)|
+ | | |router are forwarded into the VMs|
+ +-------------------------------------+-------------------------+---------------------------------+
+ |IPv6 subnet routed via L3 agent to an| |Configuration is enhanced in Kilo|
+ |external IPv6 network | |to allow easier setup of the |
+ | |1. Yes |upstream gateway, without the |
+ |1. Both VLAN and overlay (e.g. GRE, | |user forced to create an IPv6 |
+ | VXLAN) subnet attached to VMs; | |subnet for the external network. |
+ |2. Must be able to support multiple |2. Yes | |
+ | L3 agents for a given external | | |
+ | network to support scaling | | |
+ | (neutron scheduler to assign | | |
+ | vRouters to the L3 agents) | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Ability for a NIC to support both | |Dual-stack is supported in |
+ |IPv4 and IPv6 (dual stack) address. | |Neutron with the addition of |
+ | | |``Multiple IPv6 Prefixes`` |
+ |1. VM with a single interface |1. Yes |Blueprint |
+ | associated with a network, which | | |
+ | is then associated with two | | |
+ | subnets | | |
+ |2. VM with two different interfaces |2. Yes | |
+ | associated with two different | | |
+ | networks and two different subnets| | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Support IPv6 Address assignment modes|1. Yes | |
+ | | | |
+ |1. SLAAC |2. Yes | |
+ |2. DHCPv6 Stateless | | |
+ |3. DHCPv6 Stateful |3. Yes | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Ability to create a port on an IPv6 |Yes | |
+ |DHCPv6 Stateful subnet and assign a | | |
+ |specific IPv6 address to the port and| | |
+ |have it taken out of the DHCP address| | |
+ |pool. | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Ability to create a port with |**No** |The following patch disables this|
+ |fixed_ip for a SLAAC/DHCPv6-Stateless| |operation: https://review.opensta|
+ |Subnet. | |ck.org/#/c/129144/ |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Support for private IPv6 to external |**Rejected** |Blueprint proposed in upstream |
+ |IPv6 floating IP; Ability to specify | |and got rejected. General |
+ |floating IPs via Neutron API (REST | |expectation is to avoid NAT with |
+ |and CLI) as well as via Horizon, | |IPv6 by assigning GUA to tenant |
+ |including combination of IPv6/IPv4 | |VMs. See https://review.openstack|
+ |and IPv4/IPv6 floating IPs if | |.org/#/c/139731/ for discussion. |
+ |implemented. | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Provide IPv6/IPv4 feature parity in |**To-Do** |The L3 configuration should be |
+ |support for pass-through capabilities| |transparent for the SR-IOV |
+ |(e.g., SR-IOV). | |implementation. SR-IOV networking|
+ | | |support introduced in Juno based |
+ | | |on the ``sriovnicswitch`` ML2 |
+ | | |driver is expected to work with |
+ | | |IPv4 and IPv6 enabled VMs. We |
+ | | |need to verify if it works or not|
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Additional IPv6 extensions, for |**No** |It does not appear to be |
+ |example: IPSEC, IPv6 Anycast, | |considered yet (lack of clear |
+ |Multicast | |requirements) |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |VM access to the meta-data server to |**No** |This is currently not supported. |
+ |obtain user data, SSH keys, etc. | |Config-drive or dual-stack IPv4/ |
+ |using cloud-init with IPv6 only | |IPv6 can be used as a workaround |
+ |interfaces. | |(so that the IPv4 network is used|
+ | | |to obtain connectivity with the |
+ | | |metadata service) |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Full support for IPv6 matching (i.e.,|Yes | |
+ |IPv6, ICMPv6, TCP, UDP) in security | | |
+ |groups. Ability to control and manage| | |
+ |all IPv6 security group capabilities | | |
+ |via Neutron/Nova API (REST and CLI) | | |
+ |as well as via Horizon. | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |During network/subnet/router create, |Yes |Two new Subnet attributes were |
+ |there should be an option to allow | |introduced to control IPv6 |
+ |user to specify the type of address | |address assignment options: |
+ |management they would like. This | | |
+ |includes all options including those | |* ``ipv6-ra-mode``: to determine |
+ |low priority if implemented (e.g., | | who sends Router Advertisements|
+ |toggle on/off router and address | | |
+ |prefix advertisements); It must be | |* ``ipv6-address-mode``: to |
+ |supported via Neutron API (REST and | | determine how VM obtains IPv6 |
+ |CLI) as well as via Horizon | | address, default gateway, and/ |
+ | | | or optional information. |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Security groups anti-spoofing: |Yes | |
+ |Prevent VM from using a source | | |
+ |IPv6/MAC address which is not | | |
+ |assigned to the VM | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Protect tenant and provider network |Yes |When using a tenant network, |
+ |from rough RAs | |Neutron is going to automatically|
+ | | |handle the filter rules to allow |
+ | | |connectivity of RAs to the VMs |
+ | | |only from the Neutron router |
+ | | |port; with provider networks, |
+ | | |users are required to specify the|
+ | | |LLA of the upstream router during|
+ | | |the subnet creation, or otherwise|
+ | | |manually edit the security-groups|
+ | | |rules to allow incoming traffic |
+ | | |from this specific address. |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Support the ability to assign |Yes | |
+ |multiple IPv6 addresses to an | | |
+ |interface; both for Neutron router | | |
+ |interfaces and VM interfaces. | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Ability for a VM to support a mix of |Yes | |
+ |multiple IPv4 and IPv6 networks, | | |
+ |including multiples of the same type.| | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Support for IPv6 Prefix Delegation. |**Roadmap** |Some partial support is available|
+ | | |in Liberty release |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |Distributed Virtual Routing (DVR) |**No** |Blueprint proposed upstream, |
+ |support for IPv6 | |pending discussion |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |IPv6 First-Hop Security, IPv6 ND |**Roadmap** |Supported in Liberty release |
+ |spoofing. | | |
+ +-------------------------------------+-------------------------+---------------------------------+
+ |IPv6 support in Neutron Layer3 High |Yes | |
+ |Availability (keepalived+VRRP). | | |
+ +-------------------------------------+-------------------------+---------------------------------+