IPv6 Documentation for Hunter Release

Change-Id: I979485530cdd7e60e49d5c0a891e2ef76cad9bbe
Signed-off-by: BIN HU <bin.hu@att.com>

8 files changed, 83 insertions, 81 deletions

diff --git a/docs/release/configguide/featureconfig.rst b/docs/release/configguide/featureconfig.rst
index cb8e035..b05d6b1 100644
--- a/docs/release/configguide/featureconfig.rst
+++ b/docs/release/configguide/featureconfig.rst
@@ -6,7 +6,7 @@
 IPv6 Configuration - Setting Up a Service VM as an IPv6 vRouter
 ===============================================================
 
-This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Gambia Release
+This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Hunter Release
 installers. Because Open Daylight no longer supports L2-only option, and there is only limited support of
 IPv6 in L3 option of Open Daylight, setup of service VM as an IPv6 vRouter is only available under
 pure/native OpenStack environment. The deployment model may be HA or non-HA. The infrastructure may be
@@ -28,7 +28,7 @@ Setup Manual in OpenStack-Only Environment
 ******************************************
 
 If you intend to set up a service VM as an IPv6 vRouter in OpenStack-only environment of
-OPNFV Gambia Release, please **NOTE** that:
+OPNFV Hunter Release, please **NOTE** that:
 
 * Because the anti-spoofing rules of Security Group feature in OpenStack prevents
   a VM from forwarding packets, we need to disable Security Group feature in the
@@ -42,7 +42,7 @@ OPNFV Gambia Release, please **NOTE** that:
 Install OPNFV and Preparation
 -----------------------------
 
-**OPNFV-NATIVE-INSTALL-1**: To install OpenStack-only environment of OPNFV Gambia Release:
+**OPNFV-NATIVE-INSTALL-1**: To install OpenStack-only environment of OPNFV Hunter Release:
 
 **Apex Installer**:
 
diff --git a/docs/release/configguide/index.rst b/docs/release/configguide/index.rst
index 40a1c1d..5f3c43f 100644
--- a/docs/release/configguide/index.rst
+++ b/docs/release/configguide/index.rst
@@ -11,7 +11,7 @@ IPv6 Configuration Guide
 :Abstract:
 
 This document provides the users with the Configuration Guide to set up a
-service VM as an IPv6 vRouter using OPNFV Gambia Release.
+service VM as an IPv6 vRouter using OPNFV Hunter Release.
 
 .. toctree::
    :numbered:
diff --git a/docs/release/installation/index.rst b/docs/release/installation/index.rst
index 46ce838..229c7dc 100644
--- a/docs/release/installation/index.rst
+++ b/docs/release/installation/index.rst
@@ -11,7 +11,7 @@ IPv6 Installation Procedure
 :Abstract:
 
 This document provides the users with the Installation Procedure to install
-OPNFV Gambia Release on IPv6-only Infrastructure.
+OPNFV Hunter Release on IPv6-only Infrastructure.
 
 .. toctree::
    :numbered:
diff --git a/docs/release/release-notes/release-notes.rst b/docs/release/release-notes/release-notes.rst
index eb57366..d71873f 100644
--- a/docs/release/release-notes/release-notes.rst
+++ b/docs/release/release-notes/release-notes.rst
@@ -6,7 +6,7 @@
 OPNFV IPv6 Project Release Notes
 ================================
 
-This document provides the release notes for Gambia of IPv6 Project.
+This document provides the release notes for Hunter of IPv6 Project.
 
 .. contents::
    :depth: 3
@@ -20,13 +20,7 @@ Version History
 | **Date**           | **Version**        | **Author**         | **Comment**          |
 |                    |                    |                    |                      |
 +--------------------+--------------------+--------------------+----------------------+
-| 2018-09-06         | 0.1.0              | Bin Hu             | Initial draft        |
-+--------------------+--------------------+--------------------+----------------------+
-| 2018-10-18         | 1.0.0              | Bin Hu             | Release ready        |
-+--------------------+--------------------+--------------------+----------------------+
-| 2018-12-12         | 1.1.0              | Bin Hu             | SR1 Release ready    |
-+--------------------+--------------------+--------------------+----------------------+
-| 2019-01-22         | 1.2.0              | Bin Hu             | SR2 Release ready    |
+| 2019-03-14         | 0.1.0              | Bin Hu             | Initial draft        |
 +--------------------+--------------------+--------------------+----------------------+
 
 Release Data
@@ -35,13 +29,13 @@ Release Data
 +--------------------------------------+--------------------------------------+
 | **Project**                          | IPv6                                 |
 +--------------------------------------+--------------------------------------+
-| **Repo/tag**                         | opnfv-7.2.0                          |
+| **Repo/tag**                         | opnfv-8.0.0                          |
 +--------------------------------------+--------------------------------------+
-| **Release designation**              | Gambia 7.2                           |
+| **Release designation**              | Hunter 8.0                           |
 +--------------------------------------+--------------------------------------+
-| **Release date**                     | January 25, 2019                     |
+| **Release date**                     | May 10, 2019                     |
 +--------------------------------------+--------------------------------------+
-| **Purpose of the delivery**          | OPNFV Gambia 7.2 Release             |
+| **Purpose of the delivery**          | OPNFV Hunter 8.0 Release             |
 +--------------------------------------+--------------------------------------+
 
 Important Notes
@@ -62,14 +56,14 @@ For details, please refer to our `User Guide <../userguide/index.html>`_.
 Summary
 -------
 
-This is the Gambia release of the IPv6 feature as part of OPNFV, including:
+This is the Hunter release of the IPv6 feature as part of OPNFV, including:
 
 * Installation of OPNFV on IPv6-Only Infrastructure by Apex Installer
 * Configuration of setting up a Service VM as an IPv6 vRouter in OpenStack-Only
   environment
 * User Guide, which includes:
 
-  * gap analysis of IPv6 support in OpenStack Pike and OpenDaylight Nitrogen
+  * gap analysis of IPv6 support in OpenStack Rocky and OpenDaylight Fluorine
   * exploration of IPv6 in container networking
 
 Please refer to our:
@@ -104,7 +98,7 @@ Please refer to `Testing Methodology <../installation/index.html#testing-methodo
 References
 ----------
 
-For more information on the OPNFV Gambia release, please see:
+For more information on the OPNFV Hunter release, please see:
 
 http://www.opnfv.org/software
 
diff --git a/docs/release/userguide/feature.usage.rst b/docs/release/userguide/feature.usage.rst
index 4742051..026ab21 100644
--- a/docs/release/userguide/feature.usage.rst
+++ b/docs/release/userguide/feature.usage.rst
@@ -3,33 +3,33 @@
 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
 
 ====================================
-Using IPv6 Feature of Gambia Release
+Using IPv6 Feature of Hunter Release
 ====================================
 
 This section provides the users with gap analysis regarding IPv6 feature requirements with
-OpenStack Queens Official Release and Open Daylight Oxygen Official Release. The gap analysis
+OpenStack Rocky Official Release and Open Daylight Fluorine Official Release. The gap analysis
 serves as feature specific user guides and references when as a user you may leverage the
 IPv6 feature in the platform and need to perform some IPv6 related operations.
 
-For more information, please find Neutron's IPv6 document for Queens Release [1]_.
+For more information, please find Neutron's IPv6 document for Rocky Release [1]_.
 
-***************************************
-IPv6 Gap Analysis with OpenStack Queens
-***************************************
+**************************************
+IPv6 Gap Analysis with OpenStack Rocky
+**************************************
 
 This section provides users with IPv6 gap analysis regarding feature requirement with
-OpenStack Neutron in Queens Official Release. The following table lists the use cases / feature
+OpenStack Neutron in Rocky Official Release. The following table lists the use cases / feature
 requirements of VIM-agnostic IPv6 functionality, including infrastructure layer and VNF
-(VM) layer, and its gap analysis with OpenStack Neutron in Queens Official Release.
+(VM) layer, and its gap analysis with OpenStack Neutron in Rocky Official Release.
 
 Please **NOTE** that in terms of IPv6 support in OpenStack Neutron, there is no difference
-between **Queens** release and prior, e.g. **Pike** and **Ocata**, release.
+between **Rocky** release and prior, e.g. **Queens**, **Pike** and **Ocata**, release.
 
 .. table::
   :class: longtable
 
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Use Case / Requirement                                     |Supported in Queens|Notes                                                               |
+  |Use Case / Requirement                                     |Supported in Rocky |Notes                                                               |
   +===========================================================+===================+====================================================================+
   |All topologies work in a multi-tenant environment          |Yes                |The IPv6 design is following the Neutron tenant networks model;     |
   |                                                           |                   |dnsmasq is being used inside DHCP network namespaces, while radvd   |
@@ -125,9 +125,9 @@ between **Queens** release and prior, e.g. **Pike** and **Ocata**, release.
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
   |IPv6 Support in "Allowed Address Pairs" Extension          |Yes                |                                                                    |
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Support for IPv6 Prefix Delegation.                        |Yes                |Partial support in Queens                                           |
+  |Support for IPv6 Prefix Delegation.                        |Yes                |Partial support in Rocky                                            |
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Distributed Virtual Routing (DVR) support for IPv6         |**No**             |In Queens DVR implementation, IPv6 works. But all the IPv6 ingress/ |
+  |Distributed Virtual Routing (DVR) support for IPv6         |**No**             |In Rocky DVR implementation, IPv6 works. But all the IPv6 ingress/  |
   |                                                           |                   |egress traffic is routed via the centralized controller node, i.e.  |
   |                                                           |                   |similar to SNAT traffic.                                            |
   |                                                           |                   |A fully distributed IPv6 router is not yet supported in Neutron.    |
@@ -149,31 +149,31 @@ between **Queens** release and prior, e.g. **Pike** and **Ocata**, release.
   |(keepalived+VRRP).                                         |                   |                                                                    |
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
 
-*******************************************
-IPv6 Gap Analysis with Open Daylight Oxygen
-*******************************************
+*********************************************
+IPv6 Gap Analysis with Open Daylight Fluorine
+*********************************************
 
 This section provides users with IPv6 gap analysis regarding feature requirement with
-Open Daylight Oxygen Official Release. The following table lists the use cases / feature
+Open Daylight Fluorine Official Release. The following table lists the use cases / feature
 requirements of VIM-agnostic IPv6 functionality, including infrastructure layer and VNF
-(VM) layer, and its gap analysis with Open Daylight Oxygen Official Release.
+(VM) layer, and its gap analysis with Open Daylight Fluorine Official Release.
 
-**Open Daylight Oxygen Status**
+**Open Daylight Fluorine Status**
 
-In Open Daylight Oxygen official release, the legacy ``Old Netvirt`` identified by feature
+In Open Daylight Fluorine official release, the legacy ``Old Netvirt`` identified by feature
 ``odl-ovsdb-openstack`` is deprecated and no longer supported. The ``New Netvirt``
 identified by feature ``odl-netvirt-openstack`` is used.
 
-Two new features are supported in Open Daylight Oxygen official release:
+Two new features are supported in Open Daylight Fluorine official release:
 
-* "IPv6 L3VPN Dual Stack with Single router" [5]_
-* "IPv6 Inter Data Center using L3VPNs" [6]_
+* Support for advertising MTU info in IPv6 RAs
+* IPv6 external connectivity for FLAT/VLAN based provider networks
 
 .. table::
   :class: longtable
 
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
-  |Use Case / Requirement                            |Supported in ODL Oxygen  |Notes                                                         |
+  |Use Case / Requirement                            |Supported in ODL Fluorine|Notes                                                         |
   +==================================================+=========================+==============================================================+
   |REST API support for IPv6 subnet creation in ODL  |Yes                      |Yes, it is possible to create IPv6 subnets in ODL using       |
   |                                                  |                         |Neutron REST API.                                             |
@@ -195,11 +195,11 @@ Two new features are supported in Open Daylight Oxygen official release:
   |   (east-west)                                    |                         |                                                              |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPv6 Router support in ODL:                       |**NO**                   |This feature is targeted for Flourine Release.                |
-  |                                                  |                         |In ODL Oxygen Release, RFE "IPv6 Inter-DC L3 North-South      |
+  |                                                  |                         |In ODL Fluorine Release, RFE "IPv6 Inter-DC L3 North-South    |
   |3. External routing (north-south)                 |                         |Connectivity Using L3VPN Provider Network Types" Spec [3]_ is |
   |                                                  |                         |merged. But the code patch has not been merged yet.           |
   |                                                  |                         |On the other hand, "IPv6 Cluster Support" is available in     |
-  |                                                  |                         |Oxygen Release [4]_. Basically, existing IPv6 features were   |
+  |                                                  |                         |Fluorine Release [4]_. Basically, existing IPv6 features were |
   |                                                  |                         |enhanced to work in a three node ODL Clustered Setup.         |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPAM: Support for IPv6 Address assignment modes.  |Yes                      |ODL IPv6 Router supports all the IPv6 Address assignment      |
@@ -229,14 +229,18 @@ Two new features are supported in Open Daylight Oxygen official release:
   |IPv6 L3VPN Dual Stack with Single router          |Yes                      |Refer to "Dual Stack VM support in OpenDaylight" Spec [5]_.   |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPv6 Inter Data Center using L3VPNs               |Yes                      |Refer to "IPv6 Inter-DC L3 North-South connectivity using     |
-  |                                                  |                         |L3VPN provider network types" Spec [6]_.                      |
+  |                                                  |                         |L3VPN provider network types" Spec [3]_.                      |
+  +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
+  |Support for advertising MTU info in IPv6 RAs      |Yes                      |                                                              |
+  +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
+  |IPv6 external connectivity for FLAT/VLAN based    |Yes                      |                                                              |
+  |provider networks                                 |                         |                                                              |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
 
 References
 
-.. [1] Neutron IPv6 Documentation for Queens Release: http://docs.openstack.org/neutron/queens/admin/config-ipv6.html
+.. [1] Neutron IPv6 Documentation for Rocky Release: http://docs.openstack.org/neutron/rocky/admin/config-ipv6.html
 .. [2] How to Use Config-Drive for Metadata with IPv6 Network: http://superuser.openstack.org/articles/deploying-ipv6-only-tenants-with-openstack/
 .. [3] https://docs.opendaylight.org/projects/netvirt/en/stable-fluorine/specs/oxygen/ipv6-interdc-l3vpn.html
 .. [4] http://git.opendaylight.org/gerrit/#/c/66707/
-.. [5] https://docs.opendaylight.org/projects/netvirt/en/stable-oxygen/specs/l3vpn-dual-stack-vms.html
-.. [6] https://docs.opendaylight.org/projects/netvirt/en/stable-oxygen/specs/ipv6-interdc-l3vpn.html
+.. [5] https://docs.opendaylight.org/projects/netvirt/en/stable-fluorine/specs/oxygen/l3vpn-dual-stack-vms.html
diff --git a/docs/release/userguide/gap-odl-oxygen.rst b/docs/release/userguide/gap-odl-fluorine.rst
index b2a076f..7ed4f71 100644
--- a/docs/release/userguide/gap-odl-oxygen.rst
+++ b/docs/release/userguide/gap-odl-fluorine.rst
@@ -2,31 +2,31 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
 
-===========================================
-IPv6 Gap Analysis with Open Daylight Oxygen
-===========================================
+=============================================
+IPv6 Gap Analysis with Open Daylight Fluorine
+=============================================
 
 This section provides users with IPv6 gap analysis regarding feature requirement with
-Open Daylight Oxygen Official Release. The following table lists the use cases / feature
+Open Daylight Fluorine Official Release. The following table lists the use cases / feature
 requirements of VIM-agnostic IPv6 functionality, including infrastructure layer and VNF
-(VM) layer, and its gap analysis with Open Daylight Oxygen Official Release.
+(VM) layer, and its gap analysis with Open Daylight Fluorine Official Release.
 
-**Open Daylight Oxygen Status**
+**Open Daylight Fluorine Status**
 
-In Open Daylight Oxygen official release, the legacy ``Old Netvirt`` identified by feature
+In Open Daylight Fluorine official release, the legacy ``Old Netvirt`` identified by feature
 ``odl-ovsdb-openstack`` is deprecated and no longer supported. The ``New Netvirt``
 identified by feature ``odl-netvirt-openstack`` is used.
 
-Two new features are supported in Open Daylight Oxygen official release:
+Two new features are supported in Open Daylight Fluorine official release:
 
-* "IPv6 L3VPN Dual Stack with Single router" [3]_
-* "IPv6 Inter Data Center using L3VPNs" [4]_
+* Support for advertising MTU info in IPv6 RAs
+* IPv6 external connectivity for FLAT/VLAN based provider networks
 
 .. table::
   :class: longtable
 
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
-  |Use Case / Requirement                            |Supported in ODL Oxygen  |Notes                                                         |
+  |Use Case / Requirement                            |Supported in ODL Fluorine|Notes                                                         |
   +==================================================+=========================+==============================================================+
   |REST API support for IPv6 subnet creation in ODL  |Yes                      |Yes, it is possible to create IPv6 subnets in ODL using       |
   |                                                  |                         |Neutron REST API.                                             |
@@ -48,11 +48,11 @@ Two new features are supported in Open Daylight Oxygen official release:
   |   (east-west)                                    |                         |                                                              |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPv6 Router support in ODL:                       |**NO**                   |This feature is targeted for Flourine Release.                |
-  |                                                  |                         |In ODL Oxygen Release, RFE "IPv6 Inter-DC L3 North-South      |
+  |                                                  |                         |In ODL Fluorine Release, RFE "IPv6 Inter-DC L3 North-South    |
   |3. External routing (north-south)                 |                         |Connectivity Using L3VPN Provider Network Types" Spec [1]_ is |
   |                                                  |                         |merged. But the code patch has not been merged yet.           |
   |                                                  |                         |On the other hand, "IPv6 Cluster Support" is available in     |
-  |                                                  |                         |Oxygen Release [2]_. Basically, existing IPv6 features were   |
+  |                                                  |                         |Fluorine Release [2]_. Basically, existing IPv6 features were |
   |                                                  |                         |enhanced to work in a three node ODL Clustered Setup.         |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPAM: Support for IPv6 Address assignment modes.  |Yes                      |ODL IPv6 Router supports all the IPv6 Address assignment      |
@@ -82,10 +82,14 @@ Two new features are supported in Open Daylight Oxygen official release:
   |IPv6 L3VPN Dual Stack with Single router          |Yes                      |Refer to "Dual Stack VM support in OpenDaylight" Spec [3]_.   |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
   |IPv6 Inter Data Center using L3VPNs               |Yes                      |Refer to "IPv6 Inter-DC L3 North-South connectivity using     |
-  |                                                  |                         |L3VPN provider network types" Spec [4]_.                      |
+  |                                                  |                         |L3VPN provider network types" Spec [1]_.                      |
+  +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
+  |Support for advertising MTU info in IPv6 RAs      |Yes                      |                                                              |
+  +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
+  |IPv6 external connectivity for FLAT/VLAN based    |Yes                      |                                                              |
+  |provider networks                                 |                         |                                                              |
   +--------------------------------------------------+-------------------------+--------------------------------------------------------------+
 
 .. [1] https://docs.opendaylight.org/projects/netvirt/en/stable-fluorine/specs/oxygen/ipv6-interdc-l3vpn.html
 .. [2] http://git.opendaylight.org/gerrit/#/c/66707/
-.. [3] https://docs.opendaylight.org/projects/netvirt/en/stable-oxygen/specs/l3vpn-dual-stack-vms.html
-.. [4] https://docs.opendaylight.org/projects/netvirt/en/stable-oxygen/specs/ipv6-interdc-l3vpn.html
+.. [3] https://docs.opendaylight.org/projects/netvirt/en/stable-fluorine/specs/oxygen/l3vpn-dual-stack-vms.html
diff --git a/docs/release/userguide/gap-os-queens.rst b/docs/release/userguide/gap-os-rocky.rst
index f7451f2..550a918 100644
--- a/docs/release/userguide/gap-os-queens.rst
+++ b/docs/release/userguide/gap-os-rocky.rst
@@ -2,23 +2,23 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
 
-=======================================
-IPv6 Gap Analysis with OpenStack Queens
-=======================================
+======================================
+IPv6 Gap Analysis with OpenStack Rocky
+======================================
 
 This section provides users with IPv6 gap analysis regarding feature requirement with
-OpenStack Neutron in Queens Official Release. The following table lists the use cases / feature
+OpenStack Neutron in Rocky Official Release. The following table lists the use cases / feature
 requirements of VIM-agnostic IPv6 functionality, including infrastructure layer and VNF
-(VM) layer, and its gap analysis with OpenStack Neutron in Queens Official Release.
+(VM) layer, and its gap analysis with OpenStack Neutron in Rocky Official Release.
 
 Please **NOTE** that in terms of IPv6 support in OpenStack Neutron, there is no difference
-between **Queens** release and prior, e.g. **Pike** and **Ocata**, releases.
+between **Rocky** release and prior, e.g. **Queens**, **Pike** and **Ocata**, releases.
 
 .. table::
   :class: longtable
 
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Use Case / Requirement                                     |Supported in Queens|Notes                                                               |
+  |Use Case / Requirement                                     |Supported in Rocky |Notes                                                               |
   +===========================================================+===================+====================================================================+
   |All topologies work in a multi-tenant environment          |Yes                |The IPv6 design is following the Neutron tenant networks model;     |
   |                                                           |                   |dnsmasq is being used inside DHCP network namespaces, while radvd   |
@@ -116,9 +116,9 @@ between **Queens** release and prior, e.g. **Pike** and **Ocata**, releases.
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
   |IPv6 Support in "Allowed Address Pairs" Extension          |Yes                |                                                                    |
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Support for IPv6 Prefix Delegation.                        |Yes                |Partial support in Queens                                           |
+  |Support for IPv6 Prefix Delegation.                        |Yes                |Partial support in Rocky                                            |
   +-----------------------------------------------------------+-------------------+--------------------------------------------------------------------+
-  |Distributed Virtual Routing (DVR) support for IPv6         |**No**             |In Queens DVR implementation, IPv6 works. But all the IPv6 ingress/ |
+  |Distributed Virtual Routing (DVR) support for IPv6         |**No**             |In Rocky DVR implementation, IPv6 works. But all the IPv6 ingress/  |
   |                                                           |                   |egress traffic is routed via the centralized controller node, i.e.  |
   |                                                           |                   |similar to SNAT traffic.                                            |
   |                                                           |                   |A fully distributed IPv6 router is not yet supported in Neutron.    |
diff --git a/docs/release/userguide/index.rst b/docs/release/userguide/index.rst
index 95d59d4..30869aa 100644
--- a/docs/release/userguide/index.rst
+++ b/docs/release/userguide/index.rst
@@ -5,16 +5,16 @@
 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
 
 ====================================
-Using IPv6 Feature of Gambia Release
+Using IPv6 Feature of Hunter Release
 ====================================
 
 :Abstract:
 
 This section provides the users with:
 
-* Gap Analysis regarding IPv6 feature requirements with OpenStack Queens
+* Gap Analysis regarding IPv6 feature requirements with OpenStack Rocky
   Official Release
-* Gap Analysis regarding IPv6 feature requirements with Open Daylight Oxygen
+* Gap Analysis regarding IPv6 feature requirements with Open Daylight Fluorine
   Official Release
 * IPv6 Setup in Container Networking
 * Use of Neighbor Discovery (ND) Proxy to connect IPv6-only container to
@@ -33,15 +33,15 @@ containers to external network. The Docker IPv6 simple cluster topology is
 studied with two Hosts, each with 2 Docker containers. Docker IPv6 NAT topic
 is also explored.
 
-For more information, please find `Neutron's IPv6 document for Queens Release
-<http://docs.openstack.org/neutron/queens/admin/config-ipv6.html>`_.
+For more information, please find `Neutron's IPv6 document for Rocky Release
+<http://docs.openstack.org/neutron/rocky/admin/config-ipv6.html>`_.
 
 .. toctree::
    :numbered:
    :maxdepth: 4
 
-   ./gap-os-queens.rst
-   ./gap-odl-oxygen.rst
+   ./gap-os-rocky.rst
+   ./gap-odl-fluorine.rst
    ./ipv6-in-container-networking.rst
    ./icmpv6-and-ndp-proxying-for-docker-containers.rst
    ./docker-ipv6-simple-cluster-topology.rst