summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBin Hu <bh526r@att.com>2016-01-17 20:49:58 -0800
committerBin Hu <bh526r@att.com>2016-01-18 04:54:07 +0000
commit5e102a5a80717600efb191b8e75e553a52d6bed5 (patch)
treef5f4b7d29643648511be7fccd69e947b9f86b755
parenta1d2f2c7bd6618f5c67bf04141ede50846ec30fb (diff)
JIRA:IPVSIX-29
Change-Id: I9b1bcd3464fd3af30346df696e4d2d12de166d42 Signed-off-by: Bin Hu <bh526r@att.com> (cherry picked from commit 941085f6935c1ade0edabf0e89e44ae5255b87f2)
Diffstat
-rw-r--r--docs/configguide/featureconfig.rst7
-rw-r--r--docs/configguide/ipv6-configguide.rst25
-rw-r--r--docs/configguide/option-odl-l2.rst398
-rw-r--r--docs/configguide/option-pure-os.rst236
-rw-r--r--docs/reldoc/index.rst7
-rw-r--r--docs/reldoc/option-odl-l2.rst398
-rw-r--r--docs/reldoc/option-pure-os.rst236
-rw-r--r--docs/setupservicevm/4-ipv6-configguide-servicevm.rst7
-rw-r--r--docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst9
-rw-r--r--docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst6
10 files changed, 26 insertions, 1303 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst
index e5301a5..c3f71a5 100644
--- a/docs/configguide/featureconfig.rst
+++ b/docs/configguide/featureconfig.rst
@@ -92,6 +92,9 @@ Disable Security Groups in OpenStack ML2 Setup
**OPNFV-NATIVE-SEC-3**: After updating the settings, you will have to restart the
``Neutron`` and ``Nova`` services.
+**Please note that the commands of restarting ``Neutron`` and ``Nova`` would vary depending on the installer.
+Please refer to relevant documentation of specific installers**
+
---------------------------------
Set Up Service VM as IPv6 vRouter
---------------------------------
@@ -129,7 +132,7 @@ in ``devstack``, the following command should be used:
**OPNFV-NATIVE-SETUP-4: This Step is Informational. OPNFV Installer has taken care of this Step
during deployment. You may refer to this Step only if there is any issue, or if you are using other installers**.
-We have to move the public network from physical network interface to ``br-ex``, including moving
+We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``OS-NATIVE-SETUP-4`` and
``OS-NATIVE-SETUP-5`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.html#set-up-service-vm-as-ipv6-vrouter>`_.
@@ -337,7 +340,7 @@ Informational Note: Move Public Network from Physical Network Interface to ``br-
**This Step is Informational. OPNFV Installer has taken care of this Step during deployment.
You may refer to this Step only if there is any issue, or if you are using other installers**.
-We have to move the public network from physical network interface to ``br-ex``, including moving
+We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and
``SETUP-SVM-4`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/4-ipv6-configguide-servicevm.html#add-external-connectivity-to-br-ex>`_.
diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst
deleted file mode 100644
index 84afde6..0000000
--- a/docs/configguide/ipv6-configguide.rst
+++ /dev/null
@@ -1,25 +0,0 @@
-===============================================================
-Setting Up a Service VM as an IPv6 vRouter with OPNFV B Release
-===============================================================
-
-This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Brahmaputra Release
-installers with either pure OpenStack option or Open Daylight L2-only option.
-
-For complete instructions and documentations of setting up service VM as an IPv6 vRouter using ANY method,
-please refer to:
-
-1. IPv6 Configuration Guide (HTML): http://artifacts.opnfv.org/ipv6/docs/setupservicevm/index.html
-2. IPv6 Configuration Guide (PDF): http://artifacts.opnfv.org/ipv6/docs/setupservicevm/setupservicevm.pdf
-3. IPv6 User Guide (HTML): http://artifacts.opnfv.org/ipv6/docs/gapanalysis/index.html
-4. IPv6 User Guide (PDF): http://artifacts.opnfv.org/ipv6/docs/gapanalysis/gapanalysis.pdf
-
-Please see the instructions in the following 2 sections for setup using OPNFV B Release installers.
-Or go to http://artifacts.opnfv.org/ipv6/docs/reldoc/reldoc.pdf to download a PDF version.
-
-.. toctree::
- :numbered:
- :maxdepth: 4
-
- option-pure-os.rst
- option-odl-l2.rst
-
diff --git a/docs/configguide/option-odl-l2.rst b/docs/configguide/option-odl-l2.rst
deleted file mode 100644
index 42fb527..0000000
--- a/docs/configguide/option-odl-l2.rst
+++ /dev/null
@@ -1,398 +0,0 @@
-========================================================
-Setup in OpenStack and Open Daylight L2-Only Environment
-========================================================
-
-If you intend to set up a service VM as an IPv6 vRouter in an environment of OpenStack
-and Open Daylight L2-only of OPNFV Brahmaputra Release base platform, the instructions
-are as follows.
-
-Please **NOTE** that:
-
-* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
- Please change as needed to fit your environment.
-* The instructions apply to both deployment model of single controller node and
- HA (High Availability) deployment model where multiple controller nodes are used.
-* However, in case of HA, when ``ipv6-router`` is created in step **SETUP-SVM-11**,
- it could be created in any of the controller node. Thus you need to identify in which
- controller node ``ipv6-router`` is created in order to manually spawn ``radvd`` daemon
- inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through **SETUP-SVM-30**.
-
-*****************************
-Install OPNFV and Preparation
-*****************************
-
-**OPNFV-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release:
-
-.. code-block:: bash
-
- deploy --scenario os_odl-l2_ha
-
-**OPNFV-INSTALL-2**: Clone the following GitHub repository to get the
-configuration and metadata files
-
-.. code-block:: bash
-
- git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc
-
-***************************************************
-Source the Credentials in OpenStack Controller Node
-***************************************************
-
-**SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal,
-and change directory to where OpenStack is installed.
-
-**SETUP-SVM-2**: Source the credentials.
-
-.. code-block:: bash
-
- source openrc admin demo
-
-**************************************
-Add External Connectivity to ``br-ex``
-**************************************
-
-In OpenStack Controller Node, ``eth1`` is configured to provide external/public connectivity
-for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the
-default route from ``eth1`` to ``br-ex``.
-
-**SETUP-SVM-3**: Add ``eth1`` to ``br-ex`` and move the IP address and the default route from ``eth1`` to ``br-ex``
-
-.. code-block:: bash
-
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
-
-Please note that:
-
-* The IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
- below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-* **This can be automated in /etc/network/interfaces**.
-
-**SETUP-SVM-4**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on
-``br-ex``
-
-.. code-block:: bash
-
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
-
-Please note that The IP addresses above are exemplary purpose
-
-********************************************************
-Create IPv4 Subnet and Router with External Connectivity
-********************************************************
-
-**SETUP-SVM-5**: Create a Neutron router ``ipv4-router`` which needs to provide external connectivity.
-
-.. code-block:: bash
-
- neutron router-create ipv4-router
-
-**SETUP-SVM-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
-data-center physical network setup.
-
-.. code-block:: bash
-
- neutron net-create --router:external ext-net
- neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-
-Please note that the IP addresses in the command above are for exemplary purpose. **Please replace the IP addresses of
-your actual network**.
-
-**SETUP-SVM-7**: Associate the ``ext-net`` to the Neutron router ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv4-router ext-net
-
-**SETUP-SVM-8**: Create an internal/tenant IPv4 network ``ipv4-int-network1``
-
-.. code-block:: bash
-
- neutron net-create ipv4-int-network1
-
-**SETUP-SVM-9**: Create an IPv4 subnet ``ipv4-int-subnet1`` in the internal network ``ipv4-int-network1``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
-
-**SETUP-SVM-10**: Associate the IPv4 internal subnet ``ipv4-int-subnet1`` to the Neutron router ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron router-interface-add ipv4-router ipv4-int-subnet1
-
-********************************************************
-Create IPv6 Subnet and Router with External Connectivity
-********************************************************
-
-Now, let us create a second neutron router where we can "manually" spawn a ``radvd`` daemon to simulate an external
-IPv6 router.
-
-**SETUP-SVM-11**: Create a second Neutron router ``ipv6-router`` which needs to provide external connectivity
-
-.. code-block:: bash
-
- neutron router-create ipv6-router
-
-**SETUP-SVM-12**: Associate the ``ext-net`` to the Neutron router ``ipv6-router``
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv6-router ext-net
-
-**SETUP-SVM-13**: Create a second internal/tenant IPv4 network ``ipv4-int-network2``
-
-.. code-block:: bash
-
- neutron net-create ipv4-int-network2
-
-**SETUP-SVM-14**: Create an IPv4 subnet ``ipv4-int-subnet2`` for the ``ipv6-router`` internal network
-``ipv4-int-network2``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv4-int-network2 10.0.0.0/24
-
-**SETUP-SVM-15**: Associate the IPv4 internal subnet ``ipv4-int-subnet2`` to the Neutron router ``ipv6-router``.
-
-.. code-block:: bash
-
- neutron router-interface-add ipv6-router ipv4-int-subnet2
-
-**************************************************
-Prepare Image, Metadata and Keypair for Service VM
-**************************************************
-
-**SETUP-SVM-16**: Download ``fedora22`` image which would be used as ``vRouter``
-
-.. code-block:: bash
-
- glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --is-public true --copy-from https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**SETUP-SVM-17**: Create a keypair
-
-.. code-block:: bash
-
- nova keypair-add vRouterKey > ~/vRouterKey
-
-**SETUP-SVM-18**: Create ports for ``vRouter`` and both the VMs with some specific MAC addresses.
-
-.. code-block:: bash
-
- neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv4-int-network2
- neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
- neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
- neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1
-
-**********************************************************************************************************
-Boot Service VM (``vRouter``) with ``eth0`` on ``ipv4-int-network2`` and ``eth1`` on ``ipv4-int-network1``
-**********************************************************************************************************
-
-Let us boot the service VM (``vRouter``) with ``eth0`` interface on ``ipv4-int-network2`` connecting to ``ipv6-router``,
-and ``eth1`` interface on ``ipv4-int-network1`` connecting to ``ipv4-router``.
-
-**SETUP-SVM-19**: Boot the ``vRouter`` using ``Fedora22`` image on the OpenStack Compute Node with hostname
-``opnfv-os-compute``
-
-.. code-block:: bash
-
- nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter
-
-Please **note** that ``/opt/stack/opnfv_os_ipv6_poc/metadata.txt`` is used to enable the ``vRouter`` to automatically
-spawn a ``radvd``, and
-
-* Act as an IPv6 vRouter which advertises the RA (Router Advertisements) with prefix
- ``2001:db8:0:2::/64`` on its internal interface (``eth1``).
-* Forward IPv6 traffic from internal interface (``eth1``)
-
-**SETUP-SVM-20**: Verify that ``Fedora22`` image boots up successfully and vRouter has ``ssh`` keys properly injected
-
-.. code-block:: bash
-
- nova list
- nova console-log vRouter
-
-Please note that **it may take a few minutes** for the necessary packages to get installed and ``ssh`` keys
-to be injected.
-
-.. code-block:: bash
-
- # Sample Output
- [ 762.884523] cloud-init[871]: ec2: #############################################################
- [ 762.909634] cloud-init[871]: ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
- [ 762.931626] cloud-init[871]: ec2: 2048 e3:dc:3d:4a:bc:b6:b0:77:75:a1:70:a3:d0:2a:47:a9 (RSA)
- [ 762.957380] cloud-init[871]: ec2: -----END SSH HOST KEY FINGERPRINTS-----
- [ 762.979554] cloud-init[871]: ec2: #############################################################
-
-*******************************************
-Boot Two Other VMs in ``ipv4-int-network1``
-*******************************************
-
-In order to verify that the setup is working, let us create two cirros VMs with ``eth1`` interface on the
-``ipv4-int-network1``, i.e., connecting to ``vRouter`` ``eth1`` interface for internal network.
-
-We will have to configure appropriate ``mtu`` on the VMs' interface by taking into account the tunneling
-overhead and any physical switch requirements. If so, push the ``mtu`` to the VM either using ``dhcp``
-options or via ``meta-data``.
-
-**SETUP-SVM-21**: Create VM1 on OpenStack Controller Node with hostname ``opnfv-os-controller``
-
-.. code-block:: bash
-
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1
-
-**SETUP-SVM-22**: Create VM2 on OpenStack Compute Node with hostname ``opnfv-os-compute``
-
-.. code-block:: bash
-
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
-
-**SETUP-SVM-23**: Confirm that both the VMs are successfully booted.
-
-.. code-block:: bash
-
- nova list
- nova console-log VM1
- nova console-log VM2
-
-**********************************
-Spawn ``RADVD`` in ``ipv6-router``
-**********************************
-
-Let us manually spawn a ``radvd`` daemon inside ``ipv6-router`` namespace to simulate an external router.
-First of all, we will have to identify the ``ipv6-router`` namespace and move to the namespace.
-
-Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
-nodes are used, ``ipv6-router`` created in step **SETUP-SVM-11** could be in any of the controller
-node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to manually
-spawn ``radvd`` daemon inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through
-**SETUP-SVM-30**. The following command in Neutron will display the controller on which the
-``ipv6-router`` is spawned.
-
-.. code-block:: bash
-
- neutron l3-agent-list-hosting-router ipv6-router
-
-Then you login to that controller and execute steps **SETUP-SVM-24**
-through **SETUP-SVM-30**
-
-**SETUP-SVM-24**: identify the ``ipv6-router`` namespace and move to the namespace
-
-.. code-block:: bash
-
- sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') bash
-
-**SETUP-SVM-25**: Upon successful execution of the above command, you will be in the router namespace.
-Now let us configure the IPv6 address on the <qr-xxx> interface.
-
-.. code-block:: bash
-
- export router_interface=$(ip a s | grep -w "global qr-*" | awk '{print $7}')
- ip -6 addr add 2001:db8:0:1::1 dev $router_interface
-
-**SETUP-SVM-26**: Update the sample file ``/opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf``
-with ``$router_interface``.
-
-.. code-block:: bash
-
- cp /opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf /tmp/radvd.$router_interface.conf
- sed -i 's/$router_interface/'$router_interface'/g' /tmp/radvd.$router_interface.conf
-
-**SETUP-SVM-27**: Spawn a ``radvd`` daemon to simulate an external router. This ``radvd`` daemon advertises an IPv6
-subnet prefix of ``2001:db8:0:1::/64`` using RA (Router Advertisement) on its $router_interface so that ``eth0``
-interface of ``vRouter`` automatically configures an IPv6 SLAAC address.
-
-.. code-block:: bash
-
- $radvd -C /tmp/radvd.$router_interface.conf -p /tmp/br-ex.pid.radvd -m syslog
-
-**SETUP-SVM-28**: Add an IPv6 downstream route pointing to the ``eth0`` interface of vRouter.
-
-.. code-block:: bash
-
- ip -6 route add 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111
-
-**SETUP-SVM-29**: The routing table should now look similar to something shown below.
-
-.. code-block:: bash
-
- ip -6 route show
- 2001:db8:0:1::1 dev qr-42968b9e-62 proto kernel metric 256
- 2001:db8:0:1::/64 dev qr-42968b9e-62 proto kernel metric 256 expires 86384sec
- 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111 dev qr-42968b9e-62 proto ra metric 1024 expires 29sec
- fe80::/64 dev qg-3736e0c7-7c proto kernel metric 256
- fe80::/64 dev qr-42968b9e-62 proto kernel metric 256
-
-**SETUP-SVM-30**: If all goes well, the IPv6 addresses assigned to the VMs would be as shown as follows:
-
-.. code-block:: bash
-
- vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
- vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
- VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
- VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64
-
-********************************
-Testing to Verify Setup Complete
-********************************
-
-Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address
-using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``.
-
-Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command.
-
-**SETUP-SVM-31**: ``ssh`` VM1
-
-.. code-block:: bash
-
- ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address>
-
-If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify
-that IPv6 addresses are configured on ``eth0`` interface.
-
-**SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64``
-
-.. code-block:: bash
-
- ip address show
-
-**SETUP-SVM-33**: ping some external IPv6 address, e.g. ``ipv6-router``
-
-.. code-block:: bash
-
- ping6 2001:db8:0:1::1
-
-If the above ping6 command succeeds, it implies that ``vRouter`` was able to successfully forward the IPv6 traffic
-to reach external ``ipv6-router``.
-
-**SETUP-SVM-34**: When all tests show that the setup works as expected, You can now exit the ``ipv6-router`` namespace.
-
-.. code-block:: bash
-
- exit
-
-**********
-Next Steps
-**********
-
-Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
-open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on
-this IPv6 vRouter.
-
diff --git a/docs/configguide/option-pure-os.rst b/docs/configguide/option-pure-os.rst
deleted file mode 100644
index 46dcb6b..0000000
--- a/docs/configguide/option-pure-os.rst
+++ /dev/null
@@ -1,236 +0,0 @@
-======================================================================
-Set Up a Service VM as an IPv6 vRouter in Native OpenStack Environment
-======================================================================
-
-If you intend to set up a service VM as an IPv6 vRouter in native OpenStack environment of
-OPNFV Brahmaputra Release base platform, the instructions are as follows.
-
-Please **NOTE** that:
-
-* Because the anti-spoofing rules of Security Group feature in OpenStack prevents
- a VM from forwarding packets, we need to disable Security Group feature in the
- native OpenStack environment.
-* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
- Please change as needed to fit your environment.
-* The instructions apply to both deployment model of single controller node and
- HA (High Availability) deployment model where multiple controller nodes are used
-
-*****************************
-Install OPNFV and Preparation
-*****************************
-
-**OPNFV-NATIVE-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release:
-
-.. code-block:: bash
-
- deploy --scenario os_ha
-
-**OPNFV-NATIVE-INSTALL-2**: Clone the following GitHub repository to get the
-configuration and metadata files
-
-.. code-block:: bash
-
- git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc
-
-**********************************************
-Disable Security Groups in OpenStack ML2 Setup
-**********************************************
-
-**OPNFV-NATIVE-SEC-1**: Change the settings in
-``/etc/neutron/plugins/ml2/ml2_conf.ini`` as follows
-
-.. code-block:: bash
-
- # /etc/neutron/plugins/ml2/ml2_conf.ini
- [securitygroup]
- enable_security_group = False
- firewall_driver = neutron.agent.firewall.NoopFirewallDriver
-
-**OPNFV-NATIVE-SEC-2**: Change the settings in ``/etc/nova/nova.conf`` as follows
-
-.. code-block:: bash
-
- # /etc/nova/nova.conf
- [DEFAULT]
- security_group_api = nova
- firewall_driver = nova.virt.firewall.NoopFirewallDriver
-
-*********************************
-Set Up Service VM as IPv6 vRouter
-*********************************
-
-**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following
-commands should be executed:
-
-.. code-block:: bash
-
- source openrc admin demo
-
-**OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter``
-
-.. code-block:: bash
-
- wget https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**OPNFV-NATIVE-SETUP-3**: Import Fedora22 image to ``glance``
-
-.. code-block:: bash
-
- glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**OPNFV-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router``
-which need to provide external connectivity.
-
-.. code-block:: bash
-
- neutron router-create ipv4-router
- neutron router-create ipv6-router
-
-**OPNFV-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using
-the appropriate values based on the data-center physical network setup.
-
-.. code-block:: bash
-
- neutron net-create --router:external ext-net
-
-**OPNFV-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and
-``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.
-
-Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
-below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-
-.. code-block:: bash
-
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
- neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-
-**OPNFV-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address,
-and that the default route is on ``br-ex``
-
-.. code-block:: bash
-
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
-
-Please note that the IP addresses above are exemplary purpose.
-
-**OPNFV-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and
-``ipv6-int-network2`` with port_security disabled
-
-.. code-block:: bash
-
- neutron net-create --port_security_enabled=False ipv4-int-network1
- neutron net-create --port_security_enabled=False ipv6-int-network2
-
-**OPNFV-NATIVE-SETUP-9**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network
-``ipv4-int-network1``, and associate it to ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
- neutron router-interface-add ipv4-router ipv4-int-subnet1
-
-**OPNFV-NATIVE-SETUP-10**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router``
-and ``ipv6-router``.
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv4-router ext-net
- neutron router-gateway-set ipv6-router ext-net
-
-**OPNFV-NATIVE-SETUP-11**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and
-one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to
-``ipv6-router``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv6-int-network2 10.0.0.0/24
- neutron subnet-create --name ipv6-int-subnet2 --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-int-network2 2001:db8:0:1::/64
- neutron router-interface-add ipv6-router ipv4-int-subnet2
- neutron router-interface-add ipv6-router ipv6-int-subnet2
-
-**OPNFV-NATIVE-SETUP-12**: Create a keypair
-
-.. code-block:: bash
-
- nova keypair-add vRouterKey > ~/vRouterKey
-
-**OPNFV-NATIVE-SETUP-13**: Create ports for vRouter (with some specific MAC address
-- basically for automation - to know the IPv6 addresses that would be assigned to the port).
-
-.. code-block:: bash
-
- neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2
- neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
-
-**OPNFV-NATIVE-SETUP-14**: Create ports for VM1 and VM2.
-
-.. code-block:: bash
-
- neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
- neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1
-
-**OPNFV-NATIVE-SETUP-15**: Update ``ipv6-router`` with routing information to subnet
-``2001:db8:0:2::/64``
-
-.. code-block:: bash
-
- neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111
-
-**OPNFV-NATIVE-SETUP-16**: Boot Service VM (``vRouter``), VM1 and VM2
-
-.. code-block:: bash
-
- nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter
- nova list
- nova console-log vRouter #Please wait for some 10 to 15 minutes so that necessary packages (like radvd) are installed and vRouter is up.
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
- nova list # Verify that all the VMs are in ACTIVE state.
-
-**OPNFV-NATIVE-SETUP-17**: If all goes well, the IPv6 addresses assigned to the VMs
-would be as shown as follows:
-
-.. code-block:: bash
-
- vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
- vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
- VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
- VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64
-
-**OPNFV-NATIVE-SETUP-18**: Now we can ``SSH`` to ``vRouter``.
-
-Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
-nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller
-node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to
-enter the ``ipv6-router`` namespace. The following command in Neutron will display the
-controller on which the ``ipv6-router`` is spawned.
-
-.. code-block:: bash
-
- neutron l3-agent-list-hosting-router ipv6-router
-
-Then you login to that controller.
-
-To ``SSH`` to ``vRouter``, you can execute the following command.
-
-.. code-block:: bash
-
- sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111
-
diff --git a/docs/reldoc/index.rst b/docs/reldoc/index.rst
index 6eab98c..968177f 100644
--- a/docs/reldoc/index.rst
+++ b/docs/reldoc/index.rst
@@ -92,6 +92,9 @@ Disable Security Groups in OpenStack ML2 Setup
**OPNFV-NATIVE-SEC-3**: After updating the settings, you will have to restart the
``Neutron`` and ``Nova`` services.
+**Please note that the commands of restarting ``Neutron`` and ``Nova`` would vary depending on the installer.
+Please refer to relevant documentation of specific installers**
+
---------------------------------
Set Up Service VM as IPv6 vRouter
---------------------------------
@@ -129,7 +132,7 @@ in ``devstack``, the following command should be used:
**OPNFV-NATIVE-SETUP-4: This Step is Informational. OPNFV Installer has taken care of this Step
during deployment. You may refer to this Step only if there is any issue, or if you are using other installers**.
-We have to move the public network from physical network interface to ``br-ex``, including moving
+We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``OS-NATIVE-SETUP-4`` and
``OS-NATIVE-SETUP-5`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.html#set-up-service-vm-as-ipv6-vrouter>`_.
@@ -337,7 +340,7 @@ Informational Note: Move Public Network from Physical Network Interface to ``br-
**This Step is Informational. OPNFV Installer has taken care of this Step during deployment.
You may refer to this Step only if there is any issue, or if you are using other installers**.
-We have to move the public network from physical network interface to ``br-ex``, including moving
+We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and
``SETUP-SVM-4`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/4-ipv6-configguide-servicevm.html#add-external-connectivity-to-br-ex>`_.
diff --git a/docs/reldoc/option-odl-l2.rst b/docs/reldoc/option-odl-l2.rst
deleted file mode 100644
index 42fb527..0000000
--- a/docs/reldoc/option-odl-l2.rst
+++ /dev/null
@@ -1,398 +0,0 @@
-========================================================
-Setup in OpenStack and Open Daylight L2-Only Environment
-========================================================
-
-If you intend to set up a service VM as an IPv6 vRouter in an environment of OpenStack
-and Open Daylight L2-only of OPNFV Brahmaputra Release base platform, the instructions
-are as follows.
-
-Please **NOTE** that:
-
-* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
- Please change as needed to fit your environment.
-* The instructions apply to both deployment model of single controller node and
- HA (High Availability) deployment model where multiple controller nodes are used.
-* However, in case of HA, when ``ipv6-router`` is created in step **SETUP-SVM-11**,
- it could be created in any of the controller node. Thus you need to identify in which
- controller node ``ipv6-router`` is created in order to manually spawn ``radvd`` daemon
- inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through **SETUP-SVM-30**.
-
-*****************************
-Install OPNFV and Preparation
-*****************************
-
-**OPNFV-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release:
-
-.. code-block:: bash
-
- deploy --scenario os_odl-l2_ha
-
-**OPNFV-INSTALL-2**: Clone the following GitHub repository to get the
-configuration and metadata files
-
-.. code-block:: bash
-
- git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc
-
-***************************************************
-Source the Credentials in OpenStack Controller Node
-***************************************************
-
-**SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal,
-and change directory to where OpenStack is installed.
-
-**SETUP-SVM-2**: Source the credentials.
-
-.. code-block:: bash
-
- source openrc admin demo
-
-**************************************
-Add External Connectivity to ``br-ex``
-**************************************
-
-In OpenStack Controller Node, ``eth1`` is configured to provide external/public connectivity
-for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the
-default route from ``eth1`` to ``br-ex``.
-
-**SETUP-SVM-3**: Add ``eth1`` to ``br-ex`` and move the IP address and the default route from ``eth1`` to ``br-ex``
-
-.. code-block:: bash
-
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
-
-Please note that:
-
-* The IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
- below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-* **This can be automated in /etc/network/interfaces**.
-
-**SETUP-SVM-4**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on
-``br-ex``
-
-.. code-block:: bash
-
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
-
-Please note that The IP addresses above are exemplary purpose
-
-********************************************************
-Create IPv4 Subnet and Router with External Connectivity
-********************************************************
-
-**SETUP-SVM-5**: Create a Neutron router ``ipv4-router`` which needs to provide external connectivity.
-
-.. code-block:: bash
-
- neutron router-create ipv4-router
-
-**SETUP-SVM-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
-data-center physical network setup.
-
-.. code-block:: bash
-
- neutron net-create --router:external ext-net
- neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-
-Please note that the IP addresses in the command above are for exemplary purpose. **Please replace the IP addresses of
-your actual network**.
-
-**SETUP-SVM-7**: Associate the ``ext-net`` to the Neutron router ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv4-router ext-net
-
-**SETUP-SVM-8**: Create an internal/tenant IPv4 network ``ipv4-int-network1``
-
-.. code-block:: bash
-
- neutron net-create ipv4-int-network1
-
-**SETUP-SVM-9**: Create an IPv4 subnet ``ipv4-int-subnet1`` in the internal network ``ipv4-int-network1``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
-
-**SETUP-SVM-10**: Associate the IPv4 internal subnet ``ipv4-int-subnet1`` to the Neutron router ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron router-interface-add ipv4-router ipv4-int-subnet1
-
-********************************************************
-Create IPv6 Subnet and Router with External Connectivity
-********************************************************
-
-Now, let us create a second neutron router where we can "manually" spawn a ``radvd`` daemon to simulate an external
-IPv6 router.
-
-**SETUP-SVM-11**: Create a second Neutron router ``ipv6-router`` which needs to provide external connectivity
-
-.. code-block:: bash
-
- neutron router-create ipv6-router
-
-**SETUP-SVM-12**: Associate the ``ext-net`` to the Neutron router ``ipv6-router``
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv6-router ext-net
-
-**SETUP-SVM-13**: Create a second internal/tenant IPv4 network ``ipv4-int-network2``
-
-.. code-block:: bash
-
- neutron net-create ipv4-int-network2
-
-**SETUP-SVM-14**: Create an IPv4 subnet ``ipv4-int-subnet2`` for the ``ipv6-router`` internal network
-``ipv4-int-network2``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv4-int-network2 10.0.0.0/24
-
-**SETUP-SVM-15**: Associate the IPv4 internal subnet ``ipv4-int-subnet2`` to the Neutron router ``ipv6-router``.
-
-.. code-block:: bash
-
- neutron router-interface-add ipv6-router ipv4-int-subnet2
-
-**************************************************
-Prepare Image, Metadata and Keypair for Service VM
-**************************************************
-
-**SETUP-SVM-16**: Download ``fedora22`` image which would be used as ``vRouter``
-
-.. code-block:: bash
-
- glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --is-public true --copy-from https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**SETUP-SVM-17**: Create a keypair
-
-.. code-block:: bash
-
- nova keypair-add vRouterKey > ~/vRouterKey
-
-**SETUP-SVM-18**: Create ports for ``vRouter`` and both the VMs with some specific MAC addresses.
-
-.. code-block:: bash
-
- neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv4-int-network2
- neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
- neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
- neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1
-
-**********************************************************************************************************
-Boot Service VM (``vRouter``) with ``eth0`` on ``ipv4-int-network2`` and ``eth1`` on ``ipv4-int-network1``
-**********************************************************************************************************
-
-Let us boot the service VM (``vRouter``) with ``eth0`` interface on ``ipv4-int-network2`` connecting to ``ipv6-router``,
-and ``eth1`` interface on ``ipv4-int-network1`` connecting to ``ipv4-router``.
-
-**SETUP-SVM-19**: Boot the ``vRouter`` using ``Fedora22`` image on the OpenStack Compute Node with hostname
-``opnfv-os-compute``
-
-.. code-block:: bash
-
- nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter
-
-Please **note** that ``/opt/stack/opnfv_os_ipv6_poc/metadata.txt`` is used to enable the ``vRouter`` to automatically
-spawn a ``radvd``, and
-
-* Act as an IPv6 vRouter which advertises the RA (Router Advertisements) with prefix
- ``2001:db8:0:2::/64`` on its internal interface (``eth1``).
-* Forward IPv6 traffic from internal interface (``eth1``)
-
-**SETUP-SVM-20**: Verify that ``Fedora22`` image boots up successfully and vRouter has ``ssh`` keys properly injected
-
-.. code-block:: bash
-
- nova list
- nova console-log vRouter
-
-Please note that **it may take a few minutes** for the necessary packages to get installed and ``ssh`` keys
-to be injected.
-
-.. code-block:: bash
-
- # Sample Output
- [ 762.884523] cloud-init[871]: ec2: #############################################################
- [ 762.909634] cloud-init[871]: ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
- [ 762.931626] cloud-init[871]: ec2: 2048 e3:dc:3d:4a:bc:b6:b0:77:75:a1:70:a3:d0:2a:47:a9 (RSA)
- [ 762.957380] cloud-init[871]: ec2: -----END SSH HOST KEY FINGERPRINTS-----
- [ 762.979554] cloud-init[871]: ec2: #############################################################
-
-*******************************************
-Boot Two Other VMs in ``ipv4-int-network1``
-*******************************************
-
-In order to verify that the setup is working, let us create two cirros VMs with ``eth1`` interface on the
-``ipv4-int-network1``, i.e., connecting to ``vRouter`` ``eth1`` interface for internal network.
-
-We will have to configure appropriate ``mtu`` on the VMs' interface by taking into account the tunneling
-overhead and any physical switch requirements. If so, push the ``mtu`` to the VM either using ``dhcp``
-options or via ``meta-data``.
-
-**SETUP-SVM-21**: Create VM1 on OpenStack Controller Node with hostname ``opnfv-os-controller``
-
-.. code-block:: bash
-
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1
-
-**SETUP-SVM-22**: Create VM2 on OpenStack Compute Node with hostname ``opnfv-os-compute``
-
-.. code-block:: bash
-
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
-
-**SETUP-SVM-23**: Confirm that both the VMs are successfully booted.
-
-.. code-block:: bash
-
- nova list
- nova console-log VM1
- nova console-log VM2
-
-**********************************
-Spawn ``RADVD`` in ``ipv6-router``
-**********************************
-
-Let us manually spawn a ``radvd`` daemon inside ``ipv6-router`` namespace to simulate an external router.
-First of all, we will have to identify the ``ipv6-router`` namespace and move to the namespace.
-
-Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
-nodes are used, ``ipv6-router`` created in step **SETUP-SVM-11** could be in any of the controller
-node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to manually
-spawn ``radvd`` daemon inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through
-**SETUP-SVM-30**. The following command in Neutron will display the controller on which the
-``ipv6-router`` is spawned.
-
-.. code-block:: bash
-
- neutron l3-agent-list-hosting-router ipv6-router
-
-Then you login to that controller and execute steps **SETUP-SVM-24**
-through **SETUP-SVM-30**
-
-**SETUP-SVM-24**: identify the ``ipv6-router`` namespace and move to the namespace
-
-.. code-block:: bash
-
- sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') bash
-
-**SETUP-SVM-25**: Upon successful execution of the above command, you will be in the router namespace.
-Now let us configure the IPv6 address on the <qr-xxx> interface.
-
-.. code-block:: bash
-
- export router_interface=$(ip a s | grep -w "global qr-*" | awk '{print $7}')
- ip -6 addr add 2001:db8:0:1::1 dev $router_interface
-
-**SETUP-SVM-26**: Update the sample file ``/opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf``
-with ``$router_interface``.
-
-.. code-block:: bash
-
- cp /opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf /tmp/radvd.$router_interface.conf
- sed -i 's/$router_interface/'$router_interface'/g' /tmp/radvd.$router_interface.conf
-
-**SETUP-SVM-27**: Spawn a ``radvd`` daemon to simulate an external router. This ``radvd`` daemon advertises an IPv6
-subnet prefix of ``2001:db8:0:1::/64`` using RA (Router Advertisement) on its $router_interface so that ``eth0``
-interface of ``vRouter`` automatically configures an IPv6 SLAAC address.
-
-.. code-block:: bash
-
- $radvd -C /tmp/radvd.$router_interface.conf -p /tmp/br-ex.pid.radvd -m syslog
-
-**SETUP-SVM-28**: Add an IPv6 downstream route pointing to the ``eth0`` interface of vRouter.
-
-.. code-block:: bash
-
- ip -6 route add 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111
-
-**SETUP-SVM-29**: The routing table should now look similar to something shown below.
-
-.. code-block:: bash
-
- ip -6 route show
- 2001:db8:0:1::1 dev qr-42968b9e-62 proto kernel metric 256
- 2001:db8:0:1::/64 dev qr-42968b9e-62 proto kernel metric 256 expires 86384sec
- 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111 dev qr-42968b9e-62 proto ra metric 1024 expires 29sec
- fe80::/64 dev qg-3736e0c7-7c proto kernel metric 256
- fe80::/64 dev qr-42968b9e-62 proto kernel metric 256
-
-**SETUP-SVM-30**: If all goes well, the IPv6 addresses assigned to the VMs would be as shown as follows:
-
-.. code-block:: bash
-
- vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
- vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
- VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
- VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64
-
-********************************
-Testing to Verify Setup Complete
-********************************
-
-Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address
-using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``.
-
-Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command.
-
-**SETUP-SVM-31**: ``ssh`` VM1
-
-.. code-block:: bash
-
- ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address>
-
-If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify
-that IPv6 addresses are configured on ``eth0`` interface.
-
-**SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64``
-
-.. code-block:: bash
-
- ip address show
-
-**SETUP-SVM-33**: ping some external IPv6 address, e.g. ``ipv6-router``
-
-.. code-block:: bash
-
- ping6 2001:db8:0:1::1
-
-If the above ping6 command succeeds, it implies that ``vRouter`` was able to successfully forward the IPv6 traffic
-to reach external ``ipv6-router``.
-
-**SETUP-SVM-34**: When all tests show that the setup works as expected, You can now exit the ``ipv6-router`` namespace.
-
-.. code-block:: bash
-
- exit
-
-**********
-Next Steps
-**********
-
-Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
-open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on
-this IPv6 vRouter.
-
diff --git a/docs/reldoc/option-pure-os.rst b/docs/reldoc/option-pure-os.rst
deleted file mode 100644
index 46dcb6b..0000000
--- a/docs/reldoc/option-pure-os.rst
+++ /dev/null
@@ -1,236 +0,0 @@
-======================================================================
-Set Up a Service VM as an IPv6 vRouter in Native OpenStack Environment
-======================================================================
-
-If you intend to set up a service VM as an IPv6 vRouter in native OpenStack environment of
-OPNFV Brahmaputra Release base platform, the instructions are as follows.
-
-Please **NOTE** that:
-
-* Because the anti-spoofing rules of Security Group feature in OpenStack prevents
- a VM from forwarding packets, we need to disable Security Group feature in the
- native OpenStack environment.
-* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
- Please change as needed to fit your environment.
-* The instructions apply to both deployment model of single controller node and
- HA (High Availability) deployment model where multiple controller nodes are used
-
-*****************************
-Install OPNFV and Preparation
-*****************************
-
-**OPNFV-NATIVE-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release:
-
-.. code-block:: bash
-
- deploy --scenario os_ha
-
-**OPNFV-NATIVE-INSTALL-2**: Clone the following GitHub repository to get the
-configuration and metadata files
-
-.. code-block:: bash
-
- git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc
-
-**********************************************
-Disable Security Groups in OpenStack ML2 Setup
-**********************************************
-
-**OPNFV-NATIVE-SEC-1**: Change the settings in
-``/etc/neutron/plugins/ml2/ml2_conf.ini`` as follows
-
-.. code-block:: bash
-
- # /etc/neutron/plugins/ml2/ml2_conf.ini
- [securitygroup]
- enable_security_group = False
- firewall_driver = neutron.agent.firewall.NoopFirewallDriver
-
-**OPNFV-NATIVE-SEC-2**: Change the settings in ``/etc/nova/nova.conf`` as follows
-
-.. code-block:: bash
-
- # /etc/nova/nova.conf
- [DEFAULT]
- security_group_api = nova
- firewall_driver = nova.virt.firewall.NoopFirewallDriver
-
-*********************************
-Set Up Service VM as IPv6 vRouter
-*********************************
-
-**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following
-commands should be executed:
-
-.. code-block:: bash
-
- source openrc admin demo
-
-**OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter``
-
-.. code-block:: bash
-
- wget https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**OPNFV-NATIVE-SETUP-3**: Import Fedora22 image to ``glance``
-
-.. code-block:: bash
-
- glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-
-**OPNFV-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router``
-which need to provide external connectivity.
-
-.. code-block:: bash
-
- neutron router-create ipv4-router
- neutron router-create ipv6-router
-
-**OPNFV-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using
-the appropriate values based on the data-center physical network setup.
-
-.. code-block:: bash
-
- neutron net-create --router:external ext-net
-
-**OPNFV-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and
-``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.
-
-Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
-below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-
-.. code-block:: bash
-
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
- neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-
-**OPNFV-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address,
-and that the default route is on ``br-ex``
-
-.. code-block:: bash
-
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
-
-Please note that the IP addresses above are exemplary purpose.
-
-**OPNFV-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and
-``ipv6-int-network2`` with port_security disabled
-
-.. code-block:: bash
-
- neutron net-create --port_security_enabled=False ipv4-int-network1
- neutron net-create --port_security_enabled=False ipv6-int-network2
-
-**OPNFV-NATIVE-SETUP-9**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network
-``ipv4-int-network1``, and associate it to ``ipv4-router``.
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
- neutron router-interface-add ipv4-router ipv4-int-subnet1
-
-**OPNFV-NATIVE-SETUP-10**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router``
-and ``ipv6-router``.
-
-.. code-block:: bash
-
- neutron router-gateway-set ipv4-router ext-net
- neutron router-gateway-set ipv6-router ext-net
-
-**OPNFV-NATIVE-SETUP-11**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and
-one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to
-``ipv6-router``
-
-.. code-block:: bash
-
- neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv6-int-network2 10.0.0.0/24
- neutron subnet-create --name ipv6-int-subnet2 --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-int-network2 2001:db8:0:1::/64
- neutron router-interface-add ipv6-router ipv4-int-subnet2
- neutron router-interface-add ipv6-router ipv6-int-subnet2
-
-**OPNFV-NATIVE-SETUP-12**: Create a keypair
-
-.. code-block:: bash
-
- nova keypair-add vRouterKey > ~/vRouterKey
-
-**OPNFV-NATIVE-SETUP-13**: Create ports for vRouter (with some specific MAC address
-- basically for automation - to know the IPv6 addresses that would be assigned to the port).
-
-.. code-block:: bash
-
- neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2
- neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
-
-**OPNFV-NATIVE-SETUP-14**: Create ports for VM1 and VM2.
-
-.. code-block:: bash
-
- neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
- neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1
-
-**OPNFV-NATIVE-SETUP-15**: Update ``ipv6-router`` with routing information to subnet
-``2001:db8:0:2::/64``
-
-.. code-block:: bash
-
- neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111
-
-**OPNFV-NATIVE-SETUP-16**: Boot Service VM (``vRouter``), VM1 and VM2
-
-.. code-block:: bash
-
- nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter
- nova list
- nova console-log vRouter #Please wait for some 10 to 15 minutes so that necessary packages (like radvd) are installed and vRouter is up.
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1
- nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
- nova list # Verify that all the VMs are in ACTIVE state.
-
-**OPNFV-NATIVE-SETUP-17**: If all goes well, the IPv6 addresses assigned to the VMs
-would be as shown as follows:
-
-.. code-block:: bash
-
- vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
- vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
- VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
- VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64
-
-**OPNFV-NATIVE-SETUP-18**: Now we can ``SSH`` to ``vRouter``.
-
-Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
-nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller
-node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to
-enter the ``ipv6-router`` namespace. The following command in Neutron will display the
-controller on which the ``ipv6-router`` is spawned.
-
-.. code-block:: bash
-
- neutron l3-agent-list-hosting-router ipv6-router
-
-Then you login to that controller.
-
-To ``SSH`` to ``vRouter``, you can execute the following command.
-
-.. code-block:: bash
-
- sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111
-
diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
index 8d0cd9c..0868178 100644
--- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
+++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
@@ -41,8 +41,11 @@ Because we need to manually create networks/subnets to achieve the IPv6 vRouter,
``NEUTRON_CREATE_INITIAL_NETWORKS=False`` in ``local.conf`` file. When this flag is set to False,
``devstack`` does not create any networks/subnets during the setup phase.
-Now we have to move the public network from physical network interface to ``br-ex``,
-including moving the public IP address and setting up default route.
+Now we have to move the physical interface (i.e. the public network interface) to ``br-ex``,
+including moving the public IP address and setting up default route. **Please note that this step
+may already have been done when you use a different installer to deploy OpenStack because that installer
+may have already moved the physical interface to** ``br-ex`` **during deployment**.
+
In OpenStack Controller Node ``opnfv-os-controller``, ``eth1`` is configured to provide external/public connectivity
for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the
default route from ``eth1`` to ``br-ex``.
diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
index 00667bb..d020521 100644
--- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
+++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
@@ -161,6 +161,9 @@ configuration parameters.
**OS-NATIVE-SEC-3**: After updating the settings, you will have to restart the
``Neutron`` and ``Nova`` services.
+**Please note that the commands of restarting ``Neutron`` and ``Nova`` would vary depending on the installer.
+Please refer to relevant documentation of specific installers**
+
*********************************
Set Up Service VM as IPv6 vRouter
*********************************
@@ -197,8 +200,10 @@ the following command may be used for some other installers:
glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-**OS-NATIVE-SETUP-4**: Now we have to move the public network from physical network
-interface to ``br-ex``, including moving the public IP address and setting up default route.
+**OS-NATIVE-SETUP-4**: Now We have to move the physical interface (i.e. the public network interface)
+to ``br-ex``, including moving the public IP address and setting up default route. **Please note that this step
+may already have been done when you use a different installer to deploy OpenStack because that installer
+may have already moved the physical interface to** ``br-ex`` **during deployment**.
Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``,
and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.
diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
index 6595cc6..5be5228 100644
--- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
+++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
@@ -36,8 +36,10 @@ Please **NOTE** that the method of sourcing tenant credentials may vary dependin
glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-**SCENARIO-3-SETUP-4**: Now we have to move the public network from physical network
-interface to ``br-ex``, including moving the public IP address and setting up default route.
+**SCENARIO-3-SETUP-4**: Now we have to move the physical interface (i.e. the public network interface)
+to ``br-ex``, including moving the public IP address and setting up default route. **Please note that this step
+may already have been done when you use a different installer to deploy OpenStack because that installer
+may have already moved the physical interface to** ``br-ex`` **during deployment**.
Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``,
and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.