diff options
Diffstat (limited to 'fuel/build/f_isoroot/f_kscfg/ks.cfg.orig')
| -rw-r--r-- | fuel/build/f_isoroot/f_kscfg/ks.cfg.orig | 592 |
1 files changed, 0 insertions, 592 deletions
diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig deleted file mode 100644 index cf8cf80..0000000 --- a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig +++ /dev/null @@ -1,592 +0,0 @@ -install -text -%include /tmp/source.ks -reboot --eject -lang en_US.UTF-8 -keyboard us -rootpw r00tme -timezone --utc Etc/UTC -firewall --disabled -selinux --disabled -# ignore unsupported hardware warning -unsupported_hardware -# SKIP CONFIGURING X -skipx -# NEVER ever place zerombr here, it breaks automated installation -%include /tmp/bootloader.ks -%include /tmp/partition.ks - -# PREINSTALL SECTION -# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE -# INSTALLATION PROCESS ITSELF -%pre -#!/bin/sh - -# hard drives -drives="" -removable_drives="" -for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do - if !(blkid | grep -q "${drv}.*Fuel"); then - if (grep -q 0 /sys/block/${drv}/removable); then - drives="${drives} ${drv}" - else - removable_drives="${removable_drives} ${drv}" - fi - fi -done -default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'` - -installdrive="undefined" -forceformat="no" -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done - -set ${drives} ${removable_drives} -numdrives=`echo $#` - -tgtdrive="${installdrive}" - -function confirm_format { - check_drive="$1" - local confirm_format="no" - - if [[ "$forceformat" == "yes" ]] ; then - return 0 - fi - - if parted -s /dev/$check_drive print &>/dev/null ; then - echo - echo "$check_drive drive contains partition table:" - parted -s /dev/$check_drive print - echo - read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format - if [[ "$confirm_format" == "y" ]] || [[ "$confirm_format" == "Y" ]] || [[ "$forceformat" == "yes" ]]; then - return 0 - else - return 1 - fi - else - return 0 - fi -} - -format_confirmed="no" - -if [ $numdrives -lt 1 ]; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - clear - echo - echo '********************************************************************' - echo '* E R R O R *' - echo '* *' - echo '* There is no suitable media available for installation. *' - echo '* Please attach a drive and try again. *' - echo '* *' - echo '********************************************************************' - echo - read -p "Press Enter to shut down the system: " _ - poweroff -fi - -if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - while [ "${tgtdrive}" = "undefined" ]; do - clear - echo - echo '********************************************************************************' - echo '* W A R N I N G *' - echo '* *' - echo '* Which of the detected hard drives do you want to be used as *' - echo '* the installation target? *' - echo '* *' - echo '********************************************************************************' - echo - echo "Possible choices" - echo "Persistent drives: ${drives}" - echo "Removable drives: ${removable_drives}" - echo - if [ `echo ${drives} | wc -w` -eq 1 ] ; then - read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive - else - read -p "Choose hard drive: " tgtdrive - fi - match="no" - for drive in ${drives[@]} ${removable_drives[@]}; do - if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then - if confirm_format $tgtdrive ; then - format_confirmed="yes" - break - else - tgtdrive="undefined" - read -p "You may select another disk. Press Enter to continue." _ - fi - fi - done - if [[ "$match" == "no" ]]; then - tgtdrive="undefined" - read -p "Invalid choice. Press Enter to continue." _ - fi - done - clear - chvt 1 -else - tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"` -fi - -if [ "$format_confirmed" != "yes" ] ; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - if ! confirm_format $tgtdrive ; then - clear - echo - echo '********************************************************************' - echo '* E R R O R *' - echo '* *' - echo '* Disk $tgtdrive contains active partition(s). *' - echo '* Installation cannot continue without confirmation. *' - echo '* *' - echo '********************************************************************' - echo - read -p "Press Enter to restart: " _ - reboot - fi - chvt 1 -fi - -# verify tgtdrive is at least 41GB -tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) -if [ $tgtdrivesize -lt 41984 ]; then - exec < /dev/tty3 > /dev/tty3 2>&1 - chvt 3 - clear - echo - echo '********************************************************************' - echo '* E R R O R *' - echo '* *' - echo '* Your disk is under 41GB in size. Installation cannot continue. *' - echo '* Restart installation with a larger disk. *' - echo '* *' - echo '********************************************************************' - echo - read -p "Press Enter to restart: " _ - reboot -fi - -# paths in /dev have "/" instead of "!" for cciss devices -tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//') - -# source -if test -e /dev/disk/by-label/"OpenStack_Fuel"; then - echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks -elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then - echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks -else - echo "cdrom" > /tmp/source.ks -fi - -vgremove -ff os -dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10 -sleep 3 -hdparm -z /dev/${tgtdrive} -parted -s /dev/${tgtdrive} mklabel gpt -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24 -parted -s /dev/${tgtdrive} set 1 bios_grub on -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224 -parted -s /dev/${tgtdrive} set 2 boot on -parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424 -sleep 3 -hdparm -z /dev/${tgtdrive} - -# partition - -# This adds support for the p seperator required for cciss devices -if echo ${tgtdrive} | grep -q -e cciss ; then - bootdev=${tgtdrive}p -else - bootdev=${tgtdrive} -fi -echo > /tmp/partition.ks -echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks -echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks -echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks -echo "volgroup os pv.001" >> /tmp/partition.ks -echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks -echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks - - -# bootloader -echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks - -# Anaconda can not install grub 0.97 on disks which are >4T. -# The reason is that grub does not support such large geometries -# and it simply thinks that the cylinder number has negative value. -# Here we just set geometry manually so that grub thinks that disk -# size is equal to 1G. -# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G -echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks -echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks -echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks -echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks -echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks -echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks -echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks - -%end - -%packages --nobase --excludedocs -@Core -fuel -fuel-library -fuel-dockerctl -authconfig -bind-utils -cronie -crontabs -curl -daemonize -dhcp -docker-io -fuel-bootstrap-image -fuel-createmirror -fuel-target-centos-images -fuel-package-updates -fuelmenu -fuel-docker-images -gdisk -lrzip -lsof -man -mlocate -nmap-ncat -ntp -ntpdate -openssh-clients -policycoreutils -python-daemon -rsync -ruby21-puppet -ruby21-rubygem-netaddr -ruby21-rubygem-openstack -selinux-policy-targeted -strace -subscription-manager -sysstat -system-config-firewall-base -tcpdump -telnet -vim-enhanced -virt-what -wget -yum -yum-plugin-priorities - -%include /tmp/post_partition.ks - -# POSTINSTALL SECTION -# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER -# INSTALLATION ITSELF COMPLETED -%post -echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules -chmod +x /etc/rc.modules -echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf -mkdir -p /var/log/coredump -echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf -chmod 777 /var/log/coredump -echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf - -# Mount installation media in chroot -%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log -#!/bin/sh - -set -x - -SOURCE="/mnt/sysimage/tmp/source" - -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done - -mkdir -p "${SOURCE}" - -case "${repo}" in - nfs:*) - nfs_url="${repo#nfs:}" - mount -t nfs "${nfs_url}" "${SOURCE}" - ;; - *) - if [ -d "/mnt/source" ]; then - mount -o bind "/mnt/source" "${SOURCE}" - fi - ;; -esac - -%post --log=/root/anaconda-post-after-chroot.log -#!/bin/bash - -set -x - -function save_cfg { - scrFile="/etc/sysconfig/network-scripts/ifcfg-$device" - search="domain $domain\nsearch $domain" - sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network - grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts - echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf - [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf - [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream - [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf - [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream - - echo DEVICE=$device > $scrFile - echo ONBOOT=yes >> $scrFile - echo NM_CONTROLLED=no >> $scrFile - echo HWADDR=$hwaddr >> $scrFile - echo USERCTL=no >> $scrFile - echo PEERDNS=no >> $scrFile - if [ $ip ]; then - echo BOOTPROTO=static >> $scrFile - echo IPADDR=$ip >> $scrFile - echo NETMASK=$netmask >> $scrFile - else - echo BOOTPROTO=dhcp >> $scrFile - fi - scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface" - #Ignore gateway and set up DHCP if it is used, otherwise apply it - if [ $dhcp_interface ] && [ "$dhcp_interface" != "$device" ]; then - echo "DEVICE=$dhcp_interface" > $scrDHCPFile - echo "BOOTPROTO=dhcp" >> $scrDHCPFile - echo "ONBOOT=yes" >> $scrDHCPFile - echo "USERCTL=no" >> $scrDHCPFile - else - echo GATEWAY=$gw >> /etc/sysconfig/network - fi - [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images -} - -# Default FQDN -hostname="nailgun.mirantis.com" - -for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done -hostname=$hostname -domain=${hostname#*.} -ip=$ip -netmask=$netmask -gw=$gw -device="eth0" -hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` -dhcp_interface=$dhcp_interface -build_images=$build_images -save_cfg - -# Mounting installation source -SOURCE=/tmp/source -FS=/tmp/fs - -echo -mkdir -p ${SOURCE} -mkdir -p ${FS} - -if test -e /dev/disk/by-label/"OpenStack_Fuel"; then - mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE} -elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then - mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS} - mount -o loop ${FS}/nailgun.iso ${SOURCE} -fi - -OPENSTACK_VERSION=`cat ${SOURCE}/openstack_version` - -# ---------------------- -# UNPACKING REPOSITORIES -# ---------------------- - -wwwdir="/var/www/nailgun" -repodir="${wwwdir}/${OPENSTACK_VERSION}" - -# Copying Centos files -mkdir -p ${repodir}/centos/x86_64 -cp -r ${SOURCE}/images ${repodir}/centos/x86_64 -cp -r ${SOURCE}/isolinux ${repodir}/centos/x86_64 -cp -r ${SOURCE}/repodata ${repodir}/centos/x86_64 -cp -r ${SOURCE}/Packages ${repodir}/centos/x86_64 -cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64 - -# Copying Ubuntu files -mkdir -p ${repodir}/ubuntu/x86_64/images -cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64 - -# We do not ship debian-installer kernel and initrd on ISO. -# But we still need to be able to create ubuntu cobbler distro -# which requires kernel and initrd to be available. So, we -# just touch these files to work around cobbler's limitation. -touch ${repodir}/ubuntu/x86_64/images/linux -touch ${repodir}/ubuntu/x86_64/images/initrd.gz - -# make links for backward compatibility -ln -s ${repodir}/centos ${wwwdir}/centos -ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu - -# -------------------------- -# UNPACKING PUPPET MANIFESTS -# -------------------------- - -# create folders -#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/ -#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/ -#rm -rf /etc/puppet/modules/ - -# TODO(ikalnitsky): investigate why we need this -#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/ - -# place modules and manifests -#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules -#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp -cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/ - -# make links for backward compatibility -#pushd /etc/puppet -#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests -#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules -#popd - -cp ${SOURCE}/send2syslog.py /bin/send2syslog.py -mkdir -p /var/lib/hiera -touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml - -# Prepare local repository specification -rm /etc/yum.repos.d/CentOS*.repo -cat > /etc/yum.repos.d/nailgun.repo << EOF -[nailgun] -name=Nailgun Local Repo -baseurl=file:/var/www/nailgun/${OPENSTACK_VERSION}/centos/x86_64 -gpgcheck=0 -EOF - -# Disable subscription-manager plugins -sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || : -sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || : - -# Disable GSSAPI in ssh server config -sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config - -# Enable MOTD banner in sshd -sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config - -# Add note regarding local repos creation to MOTD -cat >> /etc/motd << EOF - -All environments use online repositories by default. -Use the following commands to create local repositories -on master node and change default repository settings: - -* CentOS: fuel-package-updates (see --help for options) -* Ubuntu: fuel-createmirror (see --help for options) - -Please refer to the following guide for more information: -https://docs.mirantis.com/openstack/fuel/fuel-6.1/reference-architecture.html#fuel-rep-mirror - -EOF - -# Copying bootstrap_admin_node.sh, chmod it and -# adding /etc/init/bootstrap_admin_node.conf -cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh -chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh -cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf -echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node - -# Copying version.yaml file. It contains COMMIT_SHA of last commit. -RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml) -mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions -cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml -cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml -ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml -cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat ${SOURCE}/openstack_version`.yaml - -# Generete Fuel UUID -uuidgen > /etc/fuel/fuel-uuid - -###Run fuel menu -[ -z "$showmenu" ] && showmenu="no" -cat > /root/.showfuelmenu << EOF -#Set to yes to run Fuel Setup -#Set to no to accept default settings -showmenu=$showmenu -EOF - -# Prepare custom /etc/issue logon banner and script for changing IP in it -cat > /etc/issue << EOF -######################################### -# Welcome to the Fuel server # -######################################### -Server is running on \m platform - -Fuel UI is available on: -http://:8000 - -Default administrator login: root -Default administrator password: r00tme - -Default Fuel UI login: admin -Default Fuel UI password: admin - -Please change root password on first login. - -EOF - - -cat >> '/etc/rc.local' << EOF -first=yes -for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do -if [ "\$first" = "yes" ]; then - ipstr="Fuel UI is available on: http://\$ip:8000" - first=no -else - ipstr=\$(printf "%s\n%25s%s" "\$ipstr" " " "http://\$ip:8000") -fi -done -tmpissue=\$(mktemp) -while read -r line; do - if [[ "\$line" =~ "Fuel UI is available on" ]]; then - echo -e "\$ipstr" >> \$tmpissue - elif [[ "\$line" =~ :8000$ ]]; then - : - else - echo -e "\$line" >> \$tmpissue - fi -done < /etc/issue -mv "\$tmpissue" /etc/issue - -EOF - - -# Unmounting source -umount -f ${SOURCE} -rm -rf ${SOURCE} - -umount -f ${FS} || true -rm -rf ${FS} - -echo "tos orphan 7" >> /etc/ntp.conf - -# Do not show error message on ntpdate failure. Customers should not be confused -# if admin node does not have access to the internet time servers. -sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/' - -# Disabling splash -sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf -sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf - -# Disabling console clearing -sed -i 's/getty/getty --noclear/' /etc/init/tty.conf - -# Disabling starting first console from start-ttys service -sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init - -# Copying default bash settings to the root directory -cp -f /etc/skel/.bash* /root/ - -# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors -[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf - -%end
\ No newline at end of file |