========================= OPNFV FUNCTEST user guide ========================= .. toctree:: :numbered: :maxdepth: 2 Introduction ============ The goal of this documents is to describe the Functest test cases as well as provide a procedure about how to execute them. A presentation has been created for the first OPNFV Summit `[4]`_. It is assumed that Functest container has been properly installed `[1]`_. .. include:: ./description.rst The different scenarios are described in the section hereafter. VIM (Virtualized Infrastructure Manager) --- vPing ^^^^^ Given the script 'ping.sh':: #!/bin/sh while true; do ping -c 1 $1 2>&1 >/dev/null RES=$? if [ "Z$RES" = "Z0" ] ; then echo 'vPing OK' break else echo 'vPing KO' fi sleep 1 done The goal of this test is described as follows:: vPing test case +-------------+ +-------------+ | | | | | | Boot VM1 with IP1 | | | +------------------->| | | Tester | | System | | | Boot VM2 | Under | | +------------------->| Test | | | | | | | Create floating IP | | | +------------------->| | | | | | | | Assign floating IP | | | | to VM2 | | | +------------------->| | | | | | | | Stablish SSH | | | | connection to VM2 | | | | through floating IP| | | +------------------->| | | | | | | | SCP ping.sh to VM2 | | | +------------------->| | | | | | | | VM2 executes | | | | ping.sh to VM1 | | | +------------------->| | | | | | | | If ping: | | | | exit OK | | | | else (timeout) | | | | exit Failed | | | | | | +-------------+ +-------------+ This test can be considered as an "Hello World" example. It is the first basic use case which shall work on any deployment. vPing_userdata ^^^^^^^^^^^^^^ The goal of this test can be described as follows:: vPing_userdata test case +-------------+ +-------------+ | | | | | | Boot VM1 with IP1 | | | +------------------->| | | | | | | | Boot VM2 with | | | | ping.sh as userdata| | | | with IP1 as $1. | | | +------------------->| | | Tester | | System | | | VM2 exeutes ping.sh| Under | | | (ping IP1) | Test | | +------------------->| | | | | | | | Monitor nova | | | | console-log VM 2 | | | | If ping: | | | | exit OK | | | | else (timeout) | | | | exit Failed | | | | | | +-------------+ +-------------+ This scenario is similar to the previous one but it uses cloud-init (nova metadata service) instead of floating IPs and SSH connection. When the second VM boots it will execute the script automatically and the ping will be detected capturing periodically the output in the console-log of the second VM. Tempest ^^^^^^^ Tempest `[2]`_ is the reference OpenStack Integration test suite. It is a set of integration tests to be run against a live OpenStack cluster. Tempest has batteries of tests for: * OpenStack API validation * Scenarios * Other specific tests useful in validating an OpenStack deployment Functest uses Rally `[3]`_ to run the Tempest suite. Rally generates automatically the Tempest configuration file (tempest.conf). Before running the actual test cases, Functest creates the needed resources and updates the appropriate parameters to the configuration file. When the Tempest suite is executed, each test duration is measured and the full console output is stored in the tempest.log file for further analysis. As an addition of Arno, Brahmaputra runs a customized set of Tempest test cases. The list is specificed through *--tests-file* when running Rally. This option has been introduced in Rally in version 0.1.2. The customized test list is available in the Functest repo `[4]`_. This list contains more than 200 Tempest test cases and can be divided into two main sections: 1) Set of tempest smoke test cases 2) Set of test cases from DefCore list `[8]`_ The goal of the Tempest test suite is to check the basic functionalities of different OpenStack components on an OPNFV fresh installation using the corresponding REST API interfaces. Rally bench test suites ^^^^^^^^^^^^^^^^^^^^^^^ Rally `[3]`_ is a benchmarking tool that answers the question:: “How does OpenStack work at scale?”. The goal of this test suite is to benchmark the different OpenStack modules and get significant figures that could help to define Telco Cloud KPIs. The OPNFV scenarios are based on the collection of the existing Rally scenarios: * authenticate * cinder * glance * heat * keystone * neutron * nova * quotas * requests A basic SLA (stop test on errors) have been implemented. SDN Controllers --------------- Brahmaputra introduces new SDN controllers. There are currently 3 possible controllers: * OpenDaylight (ODL) * ONOS * OpenContrail (OCL) OpenDaylight ^^^^^^^^^^^^ The OpenDaylight (ODL) test suite consists of a set of basic tests inherited from the ODL project using the Robot `[11]`_ framework. The suite verifies creation and deletion of networks, subnets and ports with OpenDaylight and Neutron. The list of tests can be described as follows: * Restconf.basic: Get the controller modules via Restconf * Neutron.Networks * Check OpenStack Networks :: Checking OpenStack Neutron for known networks * Check OpenDaylight Networks :: Checking OpenDaylight Neutron API * Create Network :: Create new network in OpenStack * Check Network :: Check Network created in OpenDaylight * Neutron.Networks :: Checking Network created in OpenStack are pushed * Neutron.Subnets * Check OpenStack Subnets :: Checking OpenStack Neutron for known Subnets * Check OpenDaylight subnets :: Checking OpenDaylight Neutron API * Create New subnet :: Create new subnet in OpenStack * Check New subnet :: Check new subnet created in OpenDaylight * Neutron.Subnets :: Checking Subnets created in OpenStack are pushed * Neutron.Ports * Check OpenStack ports :: Checking OpenStack Neutron for known ports * Check OpenDaylight ports :: Checking OpenDaylight Neutron API * Create New Port :: Create new port in OpenStack * Check New Port :: Check new subnet created in OpenDaylight * Neutron.Ports :: Checking Port created in OpenStack are pushed * Delete Ports * Delete previously created subnet in OpenStack * Check subnet deleted in OpenDaylight * Check subnet deleted in OpenStack * Delete network * Delete previously created network in OpenStack * Check network deleted in OpenDaylight * Check network deleted in OpenStack ONOS ^^^^ TestON Framework is used to test the ONOS SDN controller functions. The test cases deal with L2 and L3 functions. The ONOS test suite can be run on any ONOS compliant scenario. The test cases may be described as follows: * onosfunctest: The main executable file contains the initialization of the docker environment and functions called by FUNCvirNetNB and FUNCvirNetNBL3 * FUNCvirNetNB * Create Network: Post Network data and check it in ONOS * Update Network: Update the Network and compare it in ONOS * Delete Network: Delete the Network and check if it's NULL in ONOS or not * Create Subnet: Post Subnet data and check it in ONOS * Update Subnet: Update the Subnet and compare it in ONOS * Delete Subnet: Delete the Subnet and check if it's NULL in ONOS or not * Create Port: Post Port data and check it in ONOS * Update Port: Update the Port and compare it in ONOS * Delete Port: Delete the Port and check if it's NULL in ONOS or not * FUNCvirNetNBL3 * Create Router: Post dataes for create Router and check it in ONOS * Update Router: Update the Router and compare it in ONOS * Delete Router: Delete the Router dataes and check it in ONOS * Create RouterInterface: Post RouterInterface data to an exist Router and check it in ONOS * Delete RouterInterface: Delete the RouterInterface and check the Router * Create FloatingIp: Post dataes for create FloatingIp and check it in ONOS * Update FloatingIp: Update the FloatingIp and compare it in ONOS * Delete FloatingIp: Delete the FloatingIp and check if it's NULL in ONOS or not * Create External Gateway: Post dataes for create External Gateway to an exit Router and check it * Update External Gateway: Update the External Gateway and compare it * Delete External Gateway: Delete the External Gateway and check if it's NULL in ONOS or not OpenContrail ^^^^^^^^^^^^ TODO OVNO Features -------- vIMS ^^^^ The goal of this test suite consists of: * deploy a VNF orchestrator (Cloudify) * deploy a Clearwater vIMS (IP Multimedia Subsystem) VNF from this orchestrator based on a TOSCA blueprint defined in `[5]`_ * run suite of signaling tests on top of this VNF The Clearwater architecture is described as follows: .. figure:: ../images/clearwater-architecture.png :align: center :alt: vIMS architecture Two types of information are stored in the Test Database: * the duration of each step (orchestion deployment, VNF deployment and test) * the test results The deployment of a complete functional VNF allows the test of most of the essential functions needed for a NFV platform. Promise ^^^^^^^ Promise provides a basic set of test cases as part of Brahmaputra. The available 33 test cases can be grouped into 7 test suites: #. Add a new OpenStack provider into resource pool: Registers OpenStack into a new resource pool and adds more capacity associated with this pool. #. Allocation without reservation: Creates a new server in OpenStack and adds a new allocation record in Promise shim-layer. #. Allocation using reservation for immediate use: Creates a resource reservation record with no start/end time and immediately creates a new server in OpenStack and add a new allocation record in Promise shim-layer. #. Reservation for future use: Creates a resource reservation record for a future start time, queries, modifies and cancels the newly created reservation. #. Capacity planning: Decreases and increases the available capacity from a provider in the future and queries the available collections and utilizations. #. Reservation with conflict: Tries to create reservations for immediate and future use with conflict. #. Cleanup test allocations: Destroys all allocations in OpenStack. The specific parameters for Promise can be found in config_functest.yaml and include:: promise: general: tenant_name: Name of the OpenStack tenant/project (e.g. promise) tenant_description: Description of the OpenStack tenant (e.g. promise Functionality Testing) user_name: Name of the user tenant (e.g. promiser) user_pwd: Password of the user tenant (e.g. test) image_name: Name of the software image (e.g. promise-img) flavor_name: Name of the flavor (e.g. promise-flavor with 1 vCPU and 512 MB RAM) flavor_vcpus: 1 flavor_ram: 512 flavor_disk: 0 However, these parameters must not be changed, as they are the values expected by the Promise test suite. .. include:: ./runfunctest.rst Test results ============ VIM --- vPing ^^^^^ vPing test case output is displayed in the console:: FUNCTEST.info: Running vPing test... 2016-01-23 03:18:20,153 - vPing- INFO - Creating neutron network vping-net... 2016-01-23 03:18:35,476 - vPing- INFO - Flavor found 'm1.small' 2016-01-23 03:18:36,350 - vPing- INFO - vPing Start Time:'2016-01-23 03:18:36' 2016-01-23 03:18:38,571 - vPing- INFO - Creating instance 'opnfv-vping-1' with IP 192.168.130.30... 2016-01-23 03:18:53,716 - vPing- INFO - Instance 'opnfv-vping-1' is ACTIVE. 2016-01-23 03:18:55,239 - vPing- INFO - Creating instance 'opnfv-vping-2' with IP 192.168.130.40... 2016-01-23 03:19:15,593 - vPing- INFO - Instance 'opnfv-vping-2' is ACTIVE. 2016-01-23 03:19:15,593 - vPing- INFO - Creating floating IP for the second VM... 2016-01-23 03:19:18,017 - vPing- INFO - Floating IP created: '10.2.65.6' 2016-01-23 03:19:18,017 - vPing- INFO - Associating floating ip: '10.2.65.6' to VM2 2016-01-23 03:19:37,839 - vPing- INFO - SCP ping script to VM2... 2016-01-23 03:19:37,839 - vPing- INFO - Waiting for ping... 2016-01-23 03:19:40,130 - vPing- INFO - vPing detected! 2016-01-23 03:19:40,130 - vPing- INFO - vPing duration:'63.8' 2016-01-23 03:19:40,130 - vPing- INFO - Cleaning up... 2016-01-23 03:20:06,574 - vPing- INFO - Deleting network 'vping-net'... 2016-01-23 03:20:13,587 - vPing- INFO - vPing OK vPing_userdata ^^^^^^^^^^^^^^ vPing_userdata results are displayed in the console:: 2016-01-06 16:06:20,550 - vPing- INFO - Creating neutron network vping-net... 2016-01-06 16:06:23,867 - vPing- INFO - Flavor found 'm1.small' 2016-01-06 16:06:24,457 - vPing- INFO - vPing Start Time:'2016-01-06 16:06:24' 2016-01-06 16:06:24,626 - vPing- INFO - Creating instance 'opnfv-vping-1' with IP 192.168.130.30... 2016-01-06 16:06:39,351 - vPing- INFO - Instance 'opnfv-vping-1' is ACTIVE. 2016-01-06 16:06:39,650 - vPing- INFO - Creating instance 'opnfv-vping-2' with IP 192.168.130.40... 2016-01-06 16:06:53,330 - vPing- INFO - Instance 'opnfv-vping-2' is ACTIVE. 2016-01-06 16:06:53,330 - vPing- INFO - Waiting for ping... 2016-01-06 16:06:58,669 - vPing- INFO - vPing detected! 2016-01-06 16:06:58,669 - vPing- INFO - vPing duration:'34.2' 2016-01-06 16:06:58,670 - vPing- INFO - Cleaning up... 2016-01-06 16:07:12,661 - vPing- INFO - Deleting network 'vping-net'... 2016-01-06 16:07:14,748 - vPing- INFO - vPing OK Tempest ^^^^^^^ The Tempest results are displayed in the console:: FUNCTEST.info: Running Tempest tests... 2016-01-28 07:56:55,380 - run_tempest - INFO - Creating tenant and user for Tempest suite 2016-01-28 07:56:56.127 23795 INFO rally.verification.tempest.tempest [-] Starting: Creating configuration file for Tempest. 2016-01-28 07:56:59.512 23795 INFO rally.verification.tempest.tempest [-] Completed: Creating configuration file for Tempest. 16-01-28 07:57:00,597 - run_tempest - INFO - Starting Tempest test suite: '--tests-file /home/opnfv/repos/functest/testcases/VIM/OpenStack/CI/custom_tests/test_list.txt'. Total results of verification: . +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+ | UUID | Deployment UUID | Set name | Tests | Failures | Created at | Status | +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+ | e0bf7770-2c0f-4c63-913c-cd51a6edd96d | 16582e1e-7b01-4d5d-9c13-a26db8567b7b | | 144 | 30 | 2016-01-28 07:57:01.044856 | finished | +--------------------------------------+--------------------------------------+----------+-------+----------+----------------------------+----------+ . Tests: . +------------------------------------------------------------------------------------------------------------------------------------------+-----------+---------+ | name | time | status | +------------------------------------------------------------------------------------------------------------------------------------------+-----------+---------+ | tempest.api.compute.flavors.test_flavors.FlavorsV2TestJSON.test_get_flavor | 0.29804 | success | | tempest.api.compute.flavors.test_flavors.FlavorsV2TestJSON.test_list_flavors | 0.06289 | success | | tempest.api.compute.images.test_images.ImagesTestJSON.test_delete_saving_image | 9.21756 | success | | tempest.api.compute.images.test_images_oneserver.ImagesOneServerTestJSON.test_create_delete_image | 8.65376 | success | | tempest.api.compute.images.test_images_oneserver.ImagesOneServerTestJSON.test_create_image_specify_multibyte_character_image_name | 9.10993 | success | | tempest.api.compute.images.test_list_image_filters.ListImageFiltersTestJSON.test_list_images_filter_by_changes_since | 0.19585 | success | ........................................... 2016-01-28 08:19:32,132 - run_tempest - INFO - Results: {'timestart': '2016-01-2807:57:01.044856', 'duration': 1350, 'tests': 144, 'failures': 30} 2016-01-28 08:19:32,133 - run_tempest - INFO - Pushing results to DB: 'http://testresults.opnfv.org/testapi/results'. 2016-01-28 08:19:32,278 - run_tempest - INFO - Deleting tenant and user for Tempest suite) In order to check all the available test cases related debug information, inspect tempest.log file stored under */home/opnfv/functest/results/tempest/*. Rally ^^^^^ The Rally results are displayed in the console, each module is run one after the other. Tables are displayed:: +-------------------------------------------------------------------------------------------+ | Response Times (sec) | +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+ | action | min | median | 90%ile | 95%ile | max | avg | success | count | +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+ | keystone.create_role | 0.358 | 0.572 | 0.772 | 0.811 | 1.106 | 0.603 | 100.0% | 20 | | keystone.add_role | 0.32 | 0.436 | 0.846 | 0.903 | 1.018 | 0.51 | 100.0% | 20 | | keystone.list_roles | 0.102 | 0.185 | 0.253 | 0.275 | 0.347 | 0.188 | 100.0% | 20 | | total | 0.845 | 1.223 | 1.821 | 1.822 | 1.823 | 1.302 | 100.0% | 20 | +----------------------+-------+--------+--------+--------+-------+-------+---------+-------+ Load duration: 7.13633608818 Full duration: 36.7863121033 .............. +------------------------------------------------------------------------------------------+ | Response Times (sec) | +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+ | action | min | median | 90%ile | 95%ile | max | avg | success | count | +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+ | nova.create_keypair | 1.005 | 1.784 | 3.025 | 3.636 | 4.373 | 2.004 | 100.0% | 20 | | nova.delete_keypair | 0.199 | 0.699 | 1.007 | 1.244 | 3.014 | 0.79 | 100.0% | 20 | | total | 1.249 | 2.625 | 4.259 | 4.845 | 5.131 | 2.794 | 100.0% | 20 | +---------------------+-------+--------+--------+--------+-------+-------+---------+-------+ Load duration: 14.9231169224 Full duration: 71.4614388943 At the end of the module test, a message is displayed to provide a global summary:: 2016-02-04 12:50:18,382 - run_rally - INFO - Test scenario: "requests" OK. Controllers ----------- OpenDaylight ^^^^^^^^^^^^ The results of ODL tests can be seen in the console:: ============================================================================== Basic ============================================================================== Basic.010 Restconf OK :: Test suite to verify Restconf is OK ============================================================================== Get Controller Modules :: Get the controller modules via Restconf | PASS | ------------------------------------------------------------------------------ Basic.010 Restconf OK :: Test suite to verify Restconf is OK | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== Basic | PASS | 1 critical test, 1 passed, 0 failed 1 test total, 1 passed, 0 failed ============================================================================== Output: /home/opnfv/repos/functest/output.xml Log: /home/opnfv/repos/functest/log.html Report: /home/opnfv/repos/functest/report.html .............................................................................. Neutron.Delete Networks :: Checking Network deleted in OpenStack a... | PASS | 2 critical tests, 2 passed, 0 failed 2 tests total, 2 passed, 0 failed ============================================================================== Neutron :: Test suite for Neutron Plugin | PASS | 18 critical tests, 18 passed, 0 failed 18 tests total, 18 passed, 0 failed ============================================================================== Output: /home/opnfv/repos/functest/output.xml Log: /home/opnfv/repos/functest/log.html Report: /home/opnfv/repos/functest/report.html 3 result files are generated: * output.xml * log.html * report.html **ODL result page** .. figure:: ../images/functestODL.png :width: 170mm :align: center :alt: ODL suite result page ONOS ^^^^ The ONOS test logs can be found in OnosSystemTest/, and TestON/, and logs/ (ONOSCI_PATH to be added), and can also be seen in the console:: ****************************** Result summary for Testcase4 ****************************** 2016-01-14 05:25:40,529 - FUNCvirNetNBL3 - INFO - ONOS Router Delete test Start [2016-01-14 05:25:40.529644] [FUNCvirNetNBL3] [CASE] Virtual Network NBI Test - Router 2016-01-14 05:25:40,530 - FUNCvirNetNBL3 - INFO - Generate Post Data [2016-01-14 05:25:40.530825] [FUNCvirNetNBL3] [STEP] 4.1: Post Network Data via HTTP(Post Router need post network) 2016-01-14 05:25:40,531 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/networks/ using POST method. 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Post Network Success 2016-01-14 05:25:40,539 - FUNCvirNetNBL3 - INFO - Assertion Passed [2016-01-14 05:25:40.539687] [FUNCvirNetNBL3] [STEP] 4.2: Post Router Data via HTTP 2016-01-14 05:25:40,540 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/ using POST method. 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Post Router Success 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Assertion Passed [2016-01-14 05:25:40.543489] [FUNCvirNetNBL3] [STEP] 4.3: Delete Router Data via HTTP 2016-01-14 05:25:40,543 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/e44bd655-e22c-4aeb-b1e9-ea1606875178 using DELETE method. 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Delete Router Success 2016-01-14 05:25:40,546 - FUNCvirNetNBL3 - INFO - Assertion Passed [2016-01-14 05:25:40.546774] [FUNCvirNetNBL3] [STEP] 4.4: Get Router Data is NULL 2016-01-14 05:25:40,547 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/routers/e44bd655-e22c-4aeb-b1e9-ea1606875178 using GET method. 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Get Router Success 2016-01-14 05:25:40,550 - FUNCvirNetNBL3 - INFO - Assertion Passed ***************************** Result: Pass ***************************** ....................................................................................... ****************************** Result summary for Testcase9 ****************************** ....................................................................................... [2016-01-14 05:26:42.543489] [FUNCvirNetNBL3] [STEP] 9.6: FloatingIp Clean Data via HTTP 2016-01-14 05:26:42,543 - FUNCvirNetNBL3 - INFO - Sending request http://192.168.122.56:8181/onos/vtn/floatingips/e44bd655-e22c-4aeb-b1e9-ea1606875178 using DELETE method. 2016-01-14 05:26:42,546 - FUNCvirNetNBL3 - INFO - Verifying the Expected is equal to the actual or not using assert_equal 2016-01-14 05:26:42,546 - FUNCvirNetNBL3 - ERROR - Delete Floatingip failed ....................................................................................... ***************************** Result: Failed ***************************** There is a result summary for each testcase, and a global summary for the whole test. If any problem occurs during the test, a ERROR message will be provided in the test and the the global summary:: ************************************* Test Execution Summary ************************************* Test Start : 14 Jan 2016 05:25:37 Test End : 14 Jan 2016 05:25:41 Execution Time : 0:00:03.349087 Total tests planned : 11 Total tests RUN : 11 Total Pass : 8 Total Fail : 3 Total No Result : 0 Success Percentage : 72% Execution Result : 100% OpenContrail ^^^^^^^^^^^^ TODO OVNO Feature ------- vIMS ^^^^ The results in the console can be described as follows:: FUNCTEST.info: Running vIMS test... 2016-02-04 13:46:25,025 - vIMS - INFO - Prepare OpenStack plateform (create tenant and user) 2016-02-04 13:46:25,312 - vIMS - INFO - Update OpenStack creds informations 2016-02-04 13:46:25,312 - vIMS - INFO - Upload some OS images if it doesn't exist 2016-02-04 13:46:25,566 - vIMS - INFO - centos_7 image doesn't exist on glance repository. Try downloading this image and upload on glance ! 2016-02-04 13:47:06,167 - vIMS - INFO - ubuntu_14.04 image doesn't exist on glance repository. Try downloading this image and upload on glance ! 2016-02-04 13:47:26,987 - vIMS - INFO - Update security group quota for this tenant 2016-02-04 13:47:27,193 - vIMS - INFO - Update cinder quota for this tenant 2016-02-04 13:47:27,746 - vIMS - INFO - Collect flavor id for cloudify manager server 2016-02-04 13:47:28,326 - vIMS - INFO - Prepare virtualenv for cloudify-cli 2016-02-04 13:48:00,657 - vIMS - INFO - Downloading the cloudify manager server blueprint 2016-02-04 13:48:03,391 - vIMS - INFO - Cloudify deployment Start Time:'2016-02-04 13:48:03' 2016-02-04 13:48:03,391 - vIMS - INFO - Writing the inputs file 2016-02-04 13:48:03,395 - vIMS - INFO - Launching the cloudify-manager deployment 2016-02-04 13:56:03,501 - vIMS - INFO - Cloudify-manager server is UP ! 2016-02-04 13:56:03,502 - vIMS - INFO - Cloudify deployment duration:'480.1' 2016-02-04 13:56:03,502 - vIMS - INFO - Collect flavor id for all clearwater vm 2016-02-04 13:56:04,093 - vIMS - INFO - vIMS VNF deployment Start Time:'2016-02-04 13:56:04' 2016-02-04 13:56:04,093 - vIMS - INFO - Downloading the openstack-blueprint.yaml blueprint 2016-02-04 13:56:06,265 - vIMS - INFO - Writing the inputs file 2016-02-04 13:56:06,268 - vIMS - INFO - Launching the clearwater deployment 2016-02-04 14:11:27,101 - vIMS - INFO - The deployment of clearwater-opnfv is ended 2016-02-04 14:11:27,103 - vIMS - INFO - vIMS VNF deployment duration:'923.0' 2016-02-04 14:14:31,976 - vIMS - INFO - vIMS functional test Start Time:'2016-02-04 14:14:31' 2016-02-04 14:15:45,880 - vIMS - INFO - vIMS functional test duration:'73.9' 2016-02-04 14:15:46,113 - vIMS - INFO - Launching the clearwater-opnfv undeployment 2016-02-04 14:18:12,604 - vIMS - INFO - Launching the cloudify-manager undeployment 2016-02-04 14:18:51,808 - vIMS - INFO - Cloudify-manager server has been successfully removed! 2016-02-04 14:18:51,870 - vIMS - INFO - Removing vIMS tenant .. 2016-02-04 14:18:52,131 - vIMS - INFO - Removing vIMS user .. Please note that vIMS traces can bee summarized in several steps: * INFO: environment prepared successfully => environment OK * INFO - Cloudify-manager server is UP ! => orchestrator deployed * INFO - The deployment of clearwater-opnfv is ended => VNF deployed * Multiple Identities (UDP) - (6505550771, 6505550675) Passed => tests run Promise ^^^^^^^ The results can be observed in the console:: Running test case: promise ---------------------------------------------- FUNCTEST.info: Running PROMISE test case... 2016-02-04 07:10:37,735 - Promise- INFO - Creating tenant 'promise'... 2016-02-04 07:10:37,893 - Promise- INFO - Adding role '59828986a9a94dfaa852548599fde628' to tenant 'promise'... 2016-02-04 07:10:38,005 - Promise- INFO - Creating user 'promiser'... 2016-02-04 07:10:38,128 - Promise- INFO - Updating OpenStack credentials... 2016-02-04 07:10:38,157 - Promise- INFO - Creating image 'promise-img' from '/home/opnfv/functest/data/cirros-0.3.4-x86_64-disk.img'... 2016-02-04 07:10:42,016 - Promise- INFO - Creating flavor 'promise-flavor'... 2016-02-04 07:10:42,836 - Promise- INFO - Exporting environment variables... 2016-02-04 07:10:42,836 - Promise- INFO - Running command: DEBUG=1 npm run -s test -- --reporter json 2016-02-04 07:10:51,505 - Promise- INFO - The test succeeded. .... ********************************** Promise test summary ********************************** Test start: Thu Feb 04 07:10:42 UTC 2016 Test end: Thu Feb 04 07:10:51 UTC 2016 Execution time: 8.7 Total tests executed: 33 Total tests failed: 0 ********************************** Test Dashboard ============== Based on results collected in CI, a test dashboard is dynamically generated. The URL of this dashboard is TODO LF Troubleshooting =============== VIM --- vPing ^^^^^ vPing should work on all the scenarios. In case of timeout, check your network connectivity. The test case creates its own security group to allow SSH access, check your network settings and your security rules. vPing_userdata ^^^^^^^^^^^^^^ Cloud-init in not supported on scenario dealing with ONOS. Tempest ^^^^^^^ In the upstream OpenStack CI all the Tempest test cases are supposed to pass. If some test cases fail in an OPNFV deployment, the reason is very probably one of the following:: +-----------------------------+------------------------------------------------+ | Error | Details | +=============================+================================================+ | Resources required for test | Such resources could be e.g. an external | | case execution are missing | network and access to the management subnet | | | (adminURL) from the Functest docker container. | +-----------------------------+------------------------------------------------+ | OpenStack components or | Check running services in the controller and | | services are missing or not | compute nodes (e.g. with "systemctl" or | | configured properly | "service" commands). Configuration parameters | | | can be verified from related .conf files | | | located under /etc/ directories. | +-----------------------------+------------------------------------------------+ | Some resources required for | The tempest.conf file, automatically generated | | execution test cases are | by Rally in Functest, does not contain all the | | missing | needed parameters or some parameters are not | | | set properly. | | | The tempest.conf file is located in /home/opnfv| | | /.rally/tempest/for-deployment- in | | | Functest container | | | Use "rally deployment list" command in order to| | | check UUID of current deployment. | +-----------------------------+------------------------------------------------+ When some Tempest test case fails, captured traceback and possibly also related REST API requests/responses are output to the console. More detailed debug information can be found from tempest.log file stored into related Rally deployment folder. Rally ^^^^^ Same error causes than for Tempest mentioned above may lead to error in Rally. Controllers ----------- ODL ^^^ 2 versions are supported in Brahmaputra depending on the scenario: * Lithium * Berylium The upstream test suites have not been adapted, so you may get 18 or 15 tests passed on 18 depending on your configuration. The 3 testcases are partly failed due to wrong return code. ONOS ^^^^ TODO OpenContrail ^^^^^^^^^^^^ Feature ------- vIMS ^^^^ vIMS deployment may fail for several reasons, the most frequent ones are described in the following table: +===================================+====================================+ | Error | Comments | +-----------------------------------+------------------------------------+ | Keystone admin API not reachable | Impossible to create vIMS user and | | | tenant | +-----------------------------------+------------------------------------+ | Impossible to retrieve admin role | Impossible to create vIMS user and | | id | tenant | +-----------------------------------+------------------------------------+ | Error when uploading image from | impossible to deploy VNF | | OpenStack to glance | | +-----------------------------------+------------------------------------+ | Cinder quota cannot be updated | Default quotas not sufficient, they| | | are adapted in the script | +-----------------------------------+------------------------------------+ | Impossible to create a volume | VNF cannot be deployed | +-----------------------------------+------------------------------------+ | SSH connection issue between the | if vPing test fails, vIMS test will| | Test container and the VM | fail... | +-----------------------------------+------------------------------------+ | No Internet access from a VM | the VMs of the VNF must have an | | | external access to Internet | +-----------------------------------+------------------------------------+ Promise ^^^^^^^ TODO References ========== .. _`[1]`: Functest configuration guide URL .. _`[2]`: http://docs.openstack.org/developer/tempest/overview.html .. _`[3]`: https://rally.readthedocs.org/en/latest/index.html .. _`[4]`: http://events.linuxfoundation.org/sites/events/files/slides/Functest%20in%20Depth_0.pdf .. _`[5]`: https://github.com/Orange-OpenSource/opnfv-cloudify-clearwater/blob/master/openstack-blueprint.yaml .. _`[6]`: https://wiki.opnfv.org/opnfv_test_dashboard .. _`[7]`: http://testresults.opnfv.org/testapi/test_projects/functest/cases .. _`[8]`: https://wiki.openstack.org/wiki/Governance/DefCoreCommittee .. _`[9]`: https://git.opnfv.org/cgit/functest/tree/testcases/VIM/OpenStack/CI/libraries/os_defaults.yaml .. _`[10]`: https://git.opnfv.org/cgit/functest/tree/testcases/VIM/OpenStack/CI/rally_cert/task.yaml .. _`[11]`: http://robotframework.org/ OPNFV main site: opnfvmain_. OPNFV functional test page: opnfvfunctest_. IRC support chan: #opnfv-testperf .. _opnfvmain: http://www.opnfv.org .. _opnfvfunctest: https://wiki.opnfv.org/opnfv_functional_testing .. _`OpenRC`: http://docs.openstack.org/user-guide/common/cli_set_environment_variables_using_openstack_rc.html .. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html .. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py .. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml