From ea4e3656a812508809294b667b97b7b0b07736c9 Mon Sep 17 00:00:00 2001 From: Morgan Richomme Date: Wed, 16 Aug 2017 16:38:23 +0200 Subject: Functest Doc: first update for Euphrates - move part of the dev group to the testing document - move reporting into user guide - update logs - introduce alpine - introduce functest API - split documents per chapter Change-Id: I08268091ce50309e891a648333da2054e902bcea Signed-off-by: Morgan Richomme --- docs/testing/user/configguide/index.rst | 167 +++----------------------------- 1 file changed, 12 insertions(+), 155 deletions(-) (limited to 'docs/testing/user/configguide/index.rst') diff --git a/docs/testing/user/configguide/index.rst b/docs/testing/user/configguide/index.rst index 737f0ba7c..69c41660a 100644 --- a/docs/testing/user/configguide/index.rst +++ b/docs/testing/user/configguide/index.rst @@ -113,170 +113,23 @@ upstream communities. The functional test cases are described in the Functest User Guide `[2]`_ - -Prerequisites -============= -The OPNFV deployment is out of the scope of this document but it can be -found in http://docs.opnfv.org. -The OPNFV platform is considered as the SUT in this document. - -Several prerequisites are needed for Functest: - - #. A Jumphost to run Functest on - #. A Docker daemon shall be installed on the Jumphost - #. A public/external network created on the SUT - #. An admin/management network created on the SUT - #. Connectivity from the Jumphost to the SUT public/external network - #. Connectivity from the Jumphost to the SUT admin/management network - -WARNING: Connectivity from Jumphost is essential and it is of paramount -importance to make sure it is working before even considering to install -and run Functest. Make also sure you understand how your networking is -designed to work. - -NOTE: **Jumphost** refers to any server which meets the previous -requirements. Normally it is the same server from where the OPNFV -deployment has been triggered previously. - -NOTE: If your Jumphost is operating behind a company http proxy and/or -firewall, please consult first the section `Proxy Support`_, towards -the end of this document. The section details some tips/tricks which -*may* be of help in a proxified environment. - -Docker installation -------------------- -Docker installation and configuration is only needed to be done once -through the life cycle of Jumphost. - -If your Jumphost is based on Ubuntu, SUSE, RHEL or CentOS linux, please -consult the references below for more detailed instructions. The -commands below are offered as a short reference. - -*Tip:* For running docker containers behind the proxy, you need first -some extra configuration which is described in section -`Docker Installation on CentOS behind http proxy`_. You should follow -that section before installing the docker engine. - -Docker installation needs to be done as root user. You may use other -userid's to create and run the actual containers later if so desired. -Log on to your Jumphost as root user and install the Docker Engine -(e.g. for CentOS family):: - - curl -sSL https://get.docker.com/ | sh - systemctl start docker - - *Tip:* If you are working through proxy, please set the https_proxy - environment variable first before executing the curl command. - -Add your user to docker group to be able to run commands without sudo:: - - sudo usermod -aG docker - -A reconnection is needed. There are 2 ways for this: - #. Re-login to your account - #. su - - -References - Installing Docker Engine on different Linux Operating Systems: - * Ubuntu_ - * RHEL_ - * CentOS_ - * SUSE_ - -.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/ -.. _RHEL: https://docs.docker.com/engine/installation/linux/rhel/ -.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/ -.. _SUSE: https://docs.docker.com/engine/installation/linux/suse/ - -Public/External network on SUT ------------------------------- -Some of the tests against the VIM (Virtual Infrastructure Manager) need -connectivity through an existing public/external network in order to -succeed. This is needed, for example, to create floating IPs to access -VM instances through the public/external network (i.e. from the Docker -container). - -By default, the four OPNFV installers provide a fresh installation with -a public/external network created along with a router. Make sure that -the public/external subnet is reachable from the Jumphost. - -*Hint:* For the given OPNFV Installer in use, the IP sub-net address -used for the public/external network is usually a planning item and -should thus be known. Consult the OPNFV Configuration guide `[4]`_, and -ensure you can reach each node in the SUT, from the Jumphost using the -'ping' command using the respective IP address on the public/external -network for each node in the SUT. The details of how to determine the -needed IP addresses for each node in the SUT may vary according to the -used installer and are therefore ommitted here. - -Connectivity to Admin/Management network on SUT ------------------------------------------------ -Some of the Functest tools need to have access to the OpenStack -admin/management network of the controllers `[1]`_. - -For this reason, check the connectivity from the Jumphost to all the -controllers in cluster in the OpenStack admin/management network range. - -Installation and configuration -============================== +.. include:: ./prerequisites.rst .. include:: ./configguide.rst -Integration in CI -================= -In CI we use the Docker image and execute the appropriate commands within the -container from Jenkins. - -Docker creation in set-functest-env builder `[3]`_:: - - envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}" - [...] - docker pull opnfv/functest:$DOCKER_TAG >/dev/null - cmd="sudo docker run -id ${envs} ${volumes} ${custom_params} ${TESTCASE_OPTIONS} opnfv/functest:${DOCKER_TAG} /bin/bash" - echo "Functest: Running docker run command: ${cmd}" - ${cmd} >${redirect} - sleep 5 - container_id=$(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | awk '{print $1}' | head -1) - echo "Container ID=${container_id}" - if [ -z ${container_id} ]; then - echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing." - docker ps -a - exit 1 - fi - echo "Starting the container: docker start ${container_id}" - docker start ${container_id} - sleep 5 - docker ps >${redirect} - if [ $(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | wc -l) == 0 ]; then - echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..." - exit 1 - fi - - cmd="python ${FUNCTEST_REPO_DIR}/functest/ci/prepare_env.py start" - echo "Executing command inside the docker: ${cmd}" - docker exec ${container_id} ${cmd} - +.. include:: ./ci.rst -Test execution in functest-all builder `[3]`_:: - branch=${GIT_BRANCH##*/} - echo "Functest: run $FUNCTEST_SUITE_NAME on branch ${branch}" - cmd="functest testcase run $FUNCTEST_SUITE_NAME" - fi - container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1) - docker exec $container_id $cmd - ret_value=$? - exit $ret_value +References +========== -Docker clean in functest-cleanup builder `[3]`_ calling docker rm and docker rmi +`[1]`_ : Keystone and public end point constraint +`[2]`_ : Functest User guide -References -========== -.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/ -.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html -.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml -.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html +`[3]`_ : Functest Jenkins jobs +`[4]`_ : Functest Configuration guide `OPNFV main site`_ @@ -284,5 +137,9 @@ References IRC support channel: #opnfv-functest +.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/ +.. _`[2]`: http://docs.opnfv.org/en/stable-danube/submodules/functest/docs/testing/user/userguide/index.html +.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml +.. _`[4]`: http://docs.opnfv.org/en/stable-danube/submodules/functest/docs/testing/user/configguide/index.html .. _`OPNFV main site`: http://www.opnfv.org .. _`Functest page`: https://wiki.opnfv.org/functest -- cgit 1.2.3-korg