From 83714aaa9a09e7df27e06d5d95dadc89a8e67f9e Mon Sep 17 00:00:00 2001 From: "jose.lausuch" Date: Tue, 21 Feb 2017 15:21:45 +0100 Subject: Restructure docs DOCS directory restructured according to: https://wiki.opnfv.org/display/DOC/Documentation+Guide Now: - release - release notes - testing - developer - dev guide (this is to be released on docs.opnfv.org) - internship (docs about intern projects) - user (this is to be released on docs.opnfv.org) - config guide - user guide Change-Id: I1851189601aac3c5989f19f99d779efe23dbf3d1 Signed-off-by: jose.lausuch --- docs/testing/user/configguide/index.rst | 296 ++++++++++++++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 docs/testing/user/configguide/index.rst (limited to 'docs/testing/user/configguide/index.rst') diff --git a/docs/testing/user/configguide/index.rst b/docs/testing/user/configguide/index.rst new file mode 100644 index 000000000..f12739e31 --- /dev/null +++ b/docs/testing/user/configguide/index.rst @@ -0,0 +1,296 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + +================================== +OPNFV FUNCTEST Configuration Guide +================================== + +.. toctree:: + :numbered: + :maxdepth: 2 + +Version history +=============== + ++------------+----------+------------------+----------------------------------+ +| **Date** | **Ver.** | **Author** | **Comment** | +| | | | | ++------------+----------+------------------+----------------------------------+ +| 2016-08-17 | 1.0.0 | Juha Haapavirta | Colorado release | +| | | Column Gaynor | | ++------------+----------+------------------+----------------------------------+ +| 2017-01-19 | 1.0.1 | Morgan Richomme | Adaptations for Danube | +| | | | * update testcase list | +| | | | * update docker command | ++------------+----------+------------------+----------------------------------+ + +Introduction +============ +This document describes how to install and configure Functest in OPNFV. +The Functest CLI is utilized during the Functest environment preparation +step. The given example commands should work in both virtual and bare +metal cases alike. + +High level architecture +----------------------- + +The high level architecture of Functest within OPNFV can be described as +follows:: + + CIMC/Lights+out management Admin Mgmt/API Public Storage Private + PXE + + + + + + + + | | | | | | + | +----------------------------+ | | | | | + | | | | | | | | + +-----+ Jumphost | | | | | | + | | +--------+ | | | | + | | | | | | | | + | | +--------------------+ | | | | | | + | | | | | | | | | | + | | | Tools | +----------------+ | | | + | | | - Rally | | | | | | | + | | | - Robot | | | | | | | + | | | - TestON | | | | | | | + | | | | |-------------------------+ | | + | | | Testcases | | | | | | | + | | | - VIM | | | | | | | + | | | -- healthcheck | | | | | | | + | | | -- vPing_ssh | | | | | | | + | | | -- vPing_userdata | | | | | | | + | | | -- SNAPS_cases | | | | | | | + | | | -- Tempest_smoke | | | | | | | + | | | -- Rally_sanity | | | | | | | + | | | -- Tempest_full | | | | | | | + | | | -- Rally_full | | | | | | | + | | | | | | | | | | + | | | - SDN Controller | | | | | | | + | | | -- odl | | | | | | | + | | | -- onos | | | | | | | + | | | | | | | | | | + | | | - Features | | | | | | | + | | | | | | | | | | + | | | - VNF | | | | | | | + | | | | | | | | | | + | | +--------------------+ | | | | | | + | | Functest Docker + | | | | | + | | | | | | | | + | | | | | | | | + | | | | | | | | + | +----------------------------+ | | | | | + | | | | | | + | +----------------+ | | | | | + | | 1 | | | | | | + +----+ +--------------+-+ | | | | | + | | | 2 | | | | | | + | | | +--------------+-+ | | | | | + | | | | 3 | | | | | | + | | | | +--------------+-+ | | | | | + | | | | | 4 | | | | | | + | +-+ | | +--------------+-+ | | | | | + | | | | | 5 +-------------+ | | | | + | +-+ | | nodes for | | | | | | + | | | | deploying +---------------------+ | | | + | +-+ | OPNFV | | | | | | + | | | +------------------------------+ | | + | +-+ SUT | | | | | | + | | +--------------------------------------+ | + | | | | | | | | + | | +----------------------------------------------+ + | +----------------+ | | | | | + | | | | | | + + + + + + + + SUT = System Under Test + +All the libraries and dependencies needed by all of the Functest tools +are pre-installed into the Docker image. This allows running Functest +on any platform on any Operating System. + +The automated mechanisms inside the Functest Docker container will: + + * Retrieve OpenStack credentials + * Prepare the environment according to the SUT + * Perform the appropriate functional tests + * Push the test results into the OPNFV test result database + +This Docker image can be integrated into CI or deployed independently. + +Please note that the Functest Docker container has been designed for +OPNFV, however, it would be possible to adapt it to any VIM + controller +environment, since most of the test cases are integrated from upstream +communities. + +The functional test cases are described in the Functest User Guide `[2]`_ + + +Prerequisites +============= +The OPNFV deployment is out of the scope of this document but it can be +found in http://docs.opnfv.org. +The OPNFV platform is considered as the System Under Test (SUT) in this +document. + +Several prerequisites are needed for Functest: + + #. A Jumphost to run Functest on + #. A Docker daemon shall be installed on the Jumphost + #. A public/external network created on the SUT + #. An admin/management network created on the SUT + #. Connectivity from the Jumphost to the SUT public/external network + #. Connectivity from the Jumphost to the SUT admin/management network + +WARNING: Connectivity from Jumphost is essential and it is of paramount +importance to make sure it is working before even considering to install +and run Functest. Make also sure you understand how your networking is +designed to work. + +NOTE: **Jumphost** refers to any server which meets the previous +requirements. Normally it is the same server from where the OPNFV +deployment has been triggered previously. + +NOTE: If your Jumphost is operating behind a company http proxy and/or +Firewall, please consult first the section `Proxy Support`_, towards +the end of this document. The section details some tips/tricks which +*may* be of help in a proxified environment. + +Docker installation +------------------- +Docker installation and configuration is only needed to be done once +through the life cycle of Jumphost. + +If your Jumphost is based on Ubuntu, RHEL or CentOS linux, please +consult the references below for more detailed instructions. The +commands below are offered as a short reference. + +*Tip:* For running docker containers behind the proxy, you need first +some extra configuration which is described in section +`Docker Installation on CentOS behind http proxy`_. You should follow +that section before installing the docker engine. + +Docker installation needs to be done as root user. You may use other +userid's to create and run the actual containers later if so desired. +Log on to your Jumphost as root user and install the Docker Engine +(e.g. for CentOS family):: + + curl -sSL https://get.docker.com/ | sh + systemctl start docker + + *Tip:* If you are working through proxy, please set the https_proxy + environment variable first before executing the curl command. + +Add your user to docker group to be able to run commands without sudo:: + + sudo usermod -aG docker + +A reconnect is needed. There are 2 ways for this: + #. Re-login to your account + #. su - + +References - Installing Docker Engine on different Linux Operating Systems: + * Ubuntu_ + * RHEL_ + * CentOS_ + +.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/ +.. _RHEL: https://docs.docker.com/engine/installation/linux/rhel/ +.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/ + +Public/External network on SUT +------------------------------ +Some of the tests against the VIM (Virtual Infrastructure Manager) need +connectivity through an existing public/external network in order to +succeed. This is needed, for example, to create floating IPs to access +VM instances through the public/external network (i.e. from the Docker +container). + +By default, the four OPNFV installers provide a fresh installation with +a public/external network created along with a router. Make sure that +the public/external subnet is reachable from the Jumphost. + +*Hint:* For the given OPNFV Installer in use, the IP sub-net address +used for the public/external network is usually a planning item and +should thus be known. Consult the OPNFV Configuration guide `[4]`_, and +ensure you can reach each node in the SUT, from the Jumphost using the +'ping' command using the respective IP address on the public/external +network for each node in the SUT. The details of how to determine the +needed IP addresses for each node in the SUT may vary according to the +used installer and are therefore ommitted here. + +Connectivity to Admin/Management network on SUT +----------------------------------------------- +Some of the Functest tools need to have access to the OpenStack +admin/management network of the controllers `[1]`_. + +For this reason, check the connectivity from the Jumphost to all the +controllers in cluster in the OpenStack admin/management network range. + +Installation and configuration +============================== + +.. include:: ./configguide.rst + +Integration in CI +================= +In CI we use the Docker image and execute the appropriate commands within the +container from Jenkins. + +Docker creation in set-functest-env builder `[3]`_:: + + envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}" + [...] + docker pull opnfv/functest:$DOCKER_TAG >/dev/null + cmd="sudo docker run -id ${envs} ${volumes} ${custom_params} ${TESTCASE_OPTIONS} opnfv/functest:${DOCKER_TAG} /bin/bash" + echo "Functest: Running docker run command: ${cmd}" + ${cmd} >${redirect} + sleep 5 + container_id=$(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | awk '{print $1}' | head -1) + echo "Container ID=${container_id}" + if [ -z ${container_id} ]; then + echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing." + docker ps -a + exit 1 + fi + echo "Starting the container: docker start ${container_id}" + docker start ${container_id} + sleep 5 + docker ps >${redirect} + if [ $(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | wc -l) == 0 ]; then + echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..." + exit 1 + fi + + cmd="python ${FUNCTEST_REPO_DIR}/functest/ci/prepare_env.py start" + echo "Executing command inside the docker: ${cmd}" + docker exec ${container_id} ${cmd} + + +Test execution in functest-all builder `[3]`_:: + + branch=${GIT_BRANCH##*/} + echo "Functest: run $FUNCTEST_SUITE_NAME on branch ${branch}" + cmd="functest testcase run $FUNCTEST_SUITE_NAME" + fi + container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1) + docker exec $container_id $cmd + ret_value=$? + exit $ret_value + +Docker clean in functest-cleanup builder `[3]`_ calling docker rm and docker rmi + + +References +========== +.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/ +.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html +.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml +.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html + + +OPNFV main site: opnfvmain_. + +OPNFV functional test page: opnfvfunctest_. + +IRC support channel: #opnfv-functest + +.. _opnfvmain: http://www.opnfv.org +.. _opnfvfunctest: https://wiki.opnfv.org/functest -- cgit 1.2.3-korg