From a55aa012436df1c22a6f27ece2540067ef61b2f6 Mon Sep 17 00:00:00 2001 From: Cédric Ollivier Date: Wed, 17 Feb 2021 23:41:42 +0100 Subject: Move Functest on Raspberry PI to md MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit https://wiki.opnfv.org/display/functest/Run+Functest+containers+on+Raspberry+PI Change-Id: I7239d89237e7a06ff702ee140f8851e136eb6d87 Signed-off-by: Cédric Ollivier --- PI.md | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 PI.md (limited to 'PI.md') diff --git a/PI.md b/PI.md new file mode 100644 index 000000000..1a695a1b5 --- /dev/null +++ b/PI.md @@ -0,0 +1,32 @@ +# Run Functest containers on Raspberry PI + +All Functest containers (Hunter and newer) are cross-compiled for arm and arm64 +via [travis-ci](https://travis-ci.org/collivier/functest/branches). +They are built on top of Alpine armhf to support most of Raspberry PI models. + +All Docker manifests are published to run these containers via the same +commands whatever the architecture. + +## Copy the image to the SD card + +> https://www.raspberrypi.org/documentation/installation/installing-images/linux.md +> +> This is very important, as you will lose all the data on the hard drive if you provide the wrong device name. +> Make sure the device name is the name of the whole SD card as described above, not just a partition. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1. + + +## Install Docker + +```bash +wget https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-11-15/2018-11-13-raspbian-stretch.zip +unzip 2018-11-13-raspbian-stretch.zip +sudo dd bs=4M if=2018-11-13-raspbian-stretch.img of=/dev/mmcblk0 conv=fsync +``` + +## Install Docker + +```bash +curl -sSL https://get.docker.com | sudo sh +``` + +## That's all folks -- cgit 1.2.3-korg