From 83714aaa9a09e7df27e06d5d95dadc89a8e67f9e Mon Sep 17 00:00:00 2001 From: "jose.lausuch" Date: Tue, 21 Feb 2017 15:21:45 +0100 Subject: Restructure docs DOCS directory restructured according to: https://wiki.opnfv.org/display/DOC/Documentation+Guide Now: - release - release notes - testing - developer - dev guide (this is to be released on docs.opnfv.org) - internship (docs about intern projects) - user (this is to be released on docs.opnfv.org) - config guide - user guide Change-Id: I1851189601aac3c5989f19f99d779efe23dbf3d1 Signed-off-by: jose.lausuch --- docs/configguide/index.rst | 296 --------------------------------------------- 1 file changed, 296 deletions(-) delete mode 100644 docs/configguide/index.rst (limited to 'docs/configguide/index.rst') diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst deleted file mode 100644 index f12739e3..00000000 --- a/docs/configguide/index.rst +++ /dev/null @@ -1,296 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 - -================================== -OPNFV FUNCTEST Configuration Guide -================================== - -.. toctree:: - :numbered: - :maxdepth: 2 - -Version history -=============== - -+------------+----------+------------------+----------------------------------+ -| **Date** | **Ver.** | **Author** | **Comment** | -| | | | | -+------------+----------+------------------+----------------------------------+ -| 2016-08-17 | 1.0.0 | Juha Haapavirta | Colorado release | -| | | Column Gaynor | | -+------------+----------+------------------+----------------------------------+ -| 2017-01-19 | 1.0.1 | Morgan Richomme | Adaptations for Danube | -| | | | * update testcase list | -| | | | * update docker command | -+------------+----------+------------------+----------------------------------+ - -Introduction -============ -This document describes how to install and configure Functest in OPNFV. -The Functest CLI is utilized during the Functest environment preparation -step. The given example commands should work in both virtual and bare -metal cases alike. - -High level architecture ------------------------ - -The high level architecture of Functest within OPNFV can be described as -follows:: - - CIMC/Lights+out management Admin Mgmt/API Public Storage Private - PXE - + + + + + + - | | | | | | - | +----------------------------+ | | | | | - | | | | | | | | - +-----+ Jumphost | | | | | | - | | +--------+ | | | | - | | | | | | | | - | | +--------------------+ | | | | | | - | | | | | | | | | | - | | | Tools | +----------------+ | | | - | | | - Rally | | | | | | | - | | | - Robot | | | | | | | - | | | - TestON | | | | | | | - | | | | |-------------------------+ | | - | | | Testcases | | | | | | | - | | | - VIM | | | | | | | - | | | -- healthcheck | | | | | | | - | | | -- vPing_ssh | | | | | | | - | | | -- vPing_userdata | | | | | | | - | | | -- SNAPS_cases | | | | | | | - | | | -- Tempest_smoke | | | | | | | - | | | -- Rally_sanity | | | | | | | - | | | -- Tempest_full | | | | | | | - | | | -- Rally_full | | | | | | | - | | | | | | | | | | - | | | - SDN Controller | | | | | | | - | | | -- odl | | | | | | | - | | | -- onos | | | | | | | - | | | | | | | | | | - | | | - Features | | | | | | | - | | | | | | | | | | - | | | - VNF | | | | | | | - | | | | | | | | | | - | | +--------------------+ | | | | | | - | | Functest Docker + | | | | | - | | | | | | | | - | | | | | | | | - | | | | | | | | - | +----------------------------+ | | | | | - | | | | | | - | +----------------+ | | | | | - | | 1 | | | | | | - +----+ +--------------+-+ | | | | | - | | | 2 | | | | | | - | | | +--------------+-+ | | | | | - | | | | 3 | | | | | | - | | | | +--------------+-+ | | | | | - | | | | | 4 | | | | | | - | +-+ | | +--------------+-+ | | | | | - | | | | | 5 +-------------+ | | | | - | +-+ | | nodes for | | | | | | - | | | | deploying +---------------------+ | | | - | +-+ | OPNFV | | | | | | - | | | +------------------------------+ | | - | +-+ SUT | | | | | | - | | +--------------------------------------+ | - | | | | | | | | - | | +----------------------------------------------+ - | +----------------+ | | | | | - | | | | | | - + + + + + + - SUT = System Under Test - -All the libraries and dependencies needed by all of the Functest tools -are pre-installed into the Docker image. This allows running Functest -on any platform on any Operating System. - -The automated mechanisms inside the Functest Docker container will: - - * Retrieve OpenStack credentials - * Prepare the environment according to the SUT - * Perform the appropriate functional tests - * Push the test results into the OPNFV test result database - -This Docker image can be integrated into CI or deployed independently. - -Please note that the Functest Docker container has been designed for -OPNFV, however, it would be possible to adapt it to any VIM + controller -environment, since most of the test cases are integrated from upstream -communities. - -The functional test cases are described in the Functest User Guide `[2]`_ - - -Prerequisites -============= -The OPNFV deployment is out of the scope of this document but it can be -found in http://docs.opnfv.org. -The OPNFV platform is considered as the System Under Test (SUT) in this -document. - -Several prerequisites are needed for Functest: - - #. A Jumphost to run Functest on - #. A Docker daemon shall be installed on the Jumphost - #. A public/external network created on the SUT - #. An admin/management network created on the SUT - #. Connectivity from the Jumphost to the SUT public/external network - #. Connectivity from the Jumphost to the SUT admin/management network - -WARNING: Connectivity from Jumphost is essential and it is of paramount -importance to make sure it is working before even considering to install -and run Functest. Make also sure you understand how your networking is -designed to work. - -NOTE: **Jumphost** refers to any server which meets the previous -requirements. Normally it is the same server from where the OPNFV -deployment has been triggered previously. - -NOTE: If your Jumphost is operating behind a company http proxy and/or -Firewall, please consult first the section `Proxy Support`_, towards -the end of this document. The section details some tips/tricks which -*may* be of help in a proxified environment. - -Docker installation -------------------- -Docker installation and configuration is only needed to be done once -through the life cycle of Jumphost. - -If your Jumphost is based on Ubuntu, RHEL or CentOS linux, please -consult the references below for more detailed instructions. The -commands below are offered as a short reference. - -*Tip:* For running docker containers behind the proxy, you need first -some extra configuration which is described in section -`Docker Installation on CentOS behind http proxy`_. You should follow -that section before installing the docker engine. - -Docker installation needs to be done as root user. You may use other -userid's to create and run the actual containers later if so desired. -Log on to your Jumphost as root user and install the Docker Engine -(e.g. for CentOS family):: - - curl -sSL https://get.docker.com/ | sh - systemctl start docker - - *Tip:* If you are working through proxy, please set the https_proxy - environment variable first before executing the curl command. - -Add your user to docker group to be able to run commands without sudo:: - - sudo usermod -aG docker - -A reconnect is needed. There are 2 ways for this: - #. Re-login to your account - #. su - - -References - Installing Docker Engine on different Linux Operating Systems: - * Ubuntu_ - * RHEL_ - * CentOS_ - -.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/ -.. _RHEL: https://docs.docker.com/engine/installation/linux/rhel/ -.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/ - -Public/External network on SUT ------------------------------- -Some of the tests against the VIM (Virtual Infrastructure Manager) need -connectivity through an existing public/external network in order to -succeed. This is needed, for example, to create floating IPs to access -VM instances through the public/external network (i.e. from the Docker -container). - -By default, the four OPNFV installers provide a fresh installation with -a public/external network created along with a router. Make sure that -the public/external subnet is reachable from the Jumphost. - -*Hint:* For the given OPNFV Installer in use, the IP sub-net address -used for the public/external network is usually a planning item and -should thus be known. Consult the OPNFV Configuration guide `[4]`_, and -ensure you can reach each node in the SUT, from the Jumphost using the -'ping' command using the respective IP address on the public/external -network for each node in the SUT. The details of how to determine the -needed IP addresses for each node in the SUT may vary according to the -used installer and are therefore ommitted here. - -Connectivity to Admin/Management network on SUT ------------------------------------------------ -Some of the Functest tools need to have access to the OpenStack -admin/management network of the controllers `[1]`_. - -For this reason, check the connectivity from the Jumphost to all the -controllers in cluster in the OpenStack admin/management network range. - -Installation and configuration -============================== - -.. include:: ./configguide.rst - -Integration in CI -================= -In CI we use the Docker image and execute the appropriate commands within the -container from Jenkins. - -Docker creation in set-functest-env builder `[3]`_:: - - envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}" - [...] - docker pull opnfv/functest:$DOCKER_TAG >/dev/null - cmd="sudo docker run -id ${envs} ${volumes} ${custom_params} ${TESTCASE_OPTIONS} opnfv/functest:${DOCKER_TAG} /bin/bash" - echo "Functest: Running docker run command: ${cmd}" - ${cmd} >${redirect} - sleep 5 - container_id=$(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | awk '{print $1}' | head -1) - echo "Container ID=${container_id}" - if [ -z ${container_id} ]; then - echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing." - docker ps -a - exit 1 - fi - echo "Starting the container: docker start ${container_id}" - docker start ${container_id} - sleep 5 - docker ps >${redirect} - if [ $(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | wc -l) == 0 ]; then - echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..." - exit 1 - fi - - cmd="python ${FUNCTEST_REPO_DIR}/functest/ci/prepare_env.py start" - echo "Executing command inside the docker: ${cmd}" - docker exec ${container_id} ${cmd} - - -Test execution in functest-all builder `[3]`_:: - - branch=${GIT_BRANCH##*/} - echo "Functest: run $FUNCTEST_SUITE_NAME on branch ${branch}" - cmd="functest testcase run $FUNCTEST_SUITE_NAME" - fi - container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1) - docker exec $container_id $cmd - ret_value=$? - exit $ret_value - -Docker clean in functest-cleanup builder `[3]`_ calling docker rm and docker rmi - - -References -========== -.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/ -.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html -.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml -.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html - - -OPNFV main site: opnfvmain_. - -OPNFV functional test page: opnfvfunctest_. - -IRC support channel: #opnfv-functest - -.. _opnfvmain: http://www.opnfv.org -.. _opnfvfunctest: https://wiki.opnfv.org/functest -- cgit 1.2.3-korg