############################################################################## # Copyright (c) 2017 Mirantis Inc., Enea AB and others. # All rights reserved. This program and the accompanying materials # are made available under the terms of the Apache License, Version 2.0 # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## {# NOTE: br-{mgmt,ctl} are cross-referenced, careful when changing names #} {%- if conf.idf is defined and conf.idf.net_config is defined -%} {#- NOTE: Currently, we assume all cluster nodes use the same mapping -#} {#- Determine interface index for each network (plumbing vars) -#} {%- set idx_admin = conf['idf']['net_config']['admin']['interface'] -%} {%- set idx_mgmt = conf['idf']['net_config']['mgmt']['interface'] -%} {%- set idx_private = conf['idf']['net_config']['private']['interface'] -%} {%- set idx_public = conf['idf']['net_config']['public']['interface'] -%} {#- Physical interface OS name for each network (e.g. em1, enp1s0f1) -#} {%- set node = conf['idf']['fuel']['network']['node'][0] -%} {%- set nic_admin = node['interfaces'][idx_admin] -%} {%- set nic_mgmt = node['interfaces'][idx_mgmt] -%} {%- set nic_private = node['interfaces'][idx_private] -%} {%- set nic_public = node['interfaces'][idx_public] -%} {#- PCI addresses (only for DPDK on private) -#} {%- set bus_private = node['busaddr'][idx_private] -%} {#- VLAN for each network (only untagged 'admin' is supported by MaaS config!) -#} {%- set vlan_admin = conf['idf']['net_config']['admin']['vlan'] -%} {%- set vlan_mgmt = conf['idf']['net_config']['mgmt']['vlan'] -%} {%- set vlan_private = conf['idf']['net_config']['private']['vlan'] -%} {%- set vlan_public = conf['idf']['net_config']['public']['vlan'] -%} {%- else -%} {%- set nic_admin = 'enp6s0' -%} {%- set nic_mgmt = 'enp6s0' -%} {%- set nic_private = None -%} {%- set nic_public = None -%} {%- set vlan_admin = 'native' -%} {%- set vlan_mgmt = '300' -%} {%- set vlan_private = '1000' -%} {%- endif -%} {#- Filter-out NIC duplicates by constructing a dict (used NICs only) -#} {%- set nics = { nic_admin: True, nic_mgmt: True, nic_public: True } -%} {%- set vlans = { vlan_admin: nic_admin, vlan_mgmt: nic_mgmt, vlan_public: nic_public } -%} --- parameters: linux: network: interface: {%- for nic in nics %} {{ nic }}: enabled: true type: eth proto: manual address: 0.0.0.0 netmask: 255.255.255.0 name: {{ nic }} noifupdown: true {%- endfor %} {%- for vlan in vlans %} {%- if vlan and vlan != 'native' %} {{ vlans[vlan] }}.{{ vlan }}: enabled: true proto: manual type: vlan name: {{ vlans[vlan] }}.{{ vlan }} use_interfaces: - {{ vlans[vlan] }} {%- endif %} {%- endfor %} br-mgmt: enabled: true proto: dhcp type: bridge use_interfaces: - {{ nic_admin }}{% if vlan_admin and vlan_admin != 'native' %}.{{ vlan_admin }}{% endif %} noifupdown: true br-ctl: enabled: true type: bridge proto: static address: ${_param:single_address} netmask: 255.255.255.0 use_interfaces: - {{ nic_mgmt }}{% if vlan_mgmt and vlan_mgmt != 'native' %}.{{ vlan_mgmt }}{% endif %} br-ex: enabled: true proto: manual address: 0.0.0.0 netmask: 255.255.255.0 type: bridge use_interfaces: - {{ nic_public }}{% if vlan_public and vlan_public != 'native' %}.{{ vlan_public }}{% endif %} noifupdown: true